SV ROLLER SOFT BRAKE Smooth & quiet Sliding door or wall with soft close No holes in glass required Can be top or side mounted from a wall or cavity

...................................................................... SV ROLLER SOFT BRAKE

In partnership with Saheco, European leaders in sliding, folding and moveable doors and walls, FGS is proud to launch the SV Roller Soft Brake range of internal frameless glass sliding doors. Ideal for internal room dividers and doors for home and commercial use, the SV Roller Soft Brake Sliding Range is available as a single soft close or a double soft close option. With high quality clamps and rollers with precision ball bearings, the SV Roller Soft Brake produces a smooth and quiet action and contains a sleek flat cover to conceal the clamping mechanism. In an Anodised Aluminium Finish and with no holes required in glass, the SV Roller Soft Brake Sliding System provides an aesthetically pleasing solution which is easy to install. Suitable for 10, 12 or 13.52mm glass thickness for single or double bi-parting doors (from a wall or wall cavity), single or double soft brake options and able to be mounted from the top or side, the SV Roller Soft Brake provides many options and features....................................................................... SOFT CLOSE FUNCTIONALITY

Single Soft Close functionality is a standard offer on the SV Roller Soft Brake Sliding System and can be fitted to either end of the panel, providing a dampening brake for the last 85mm. Coupled with the hydraulic shock absorber you can be assured of a smooth, soft close with no ‘slamming’ every time. There is also the option of ordering a double soft close which can be fitted to both sides of the door and an autoclose option coming soon. Scan the QR Code to view a demonstration of the Soft Close.

......................................................................

TECHNICAL FEATURES

................................................................... INSTALLATION OPTIONS SINGLE SLIDER FROM WALL

SINGLE SLIDER FROM WALL CAVITY BI-PARTING SLIDING DOORS FROM WALL BI-PARTING SLIDING DOORS FROM WALL CAVITY ........................................................................

........................................................................

SV-ROLLER SOFT BRAKE 80

Maximum Panel Weight 80kg

Glass Thickness 10 - 13.52mm

Soft Brake Single (one end of panel) Double (both ends of panel)

Minimum Panel Width 650mm (Single Soft Brake) 850mm (Double Soft Brake)

Maximum Panel Width Determined by Maximum Weight

Finish Anodised Aluminium

Track Lengths 3000mm Custom track lengths available on request (P.O.A.)

Clamp Cover 65mm height, 3000mm length

End Caps for Clamps Sold as a pair for 10, 12 & 13.52mm glass thickness

SV-

42.5 x 32.5 mm

Saheco presenta el nuevo sistema SV-Roller + Softbrake, sistema para hojas correderas de hasta 60 kg. El nuevo sistema SV- Roller se caracteriza por la completa ocultación de su mecanismo

inferior del mismo plana; lo cual cosa ayuda a la mejora de la integración del sistema en el espacio. Asimismo, el nuevo softbrake (freno amortiguador) que compone

y puede ser implementado a uno o ambos lados de la puerta proporcionando suavidad y acompañando a la

Además, el amortiguador hidráulico metálico de 10mm de diámetro le garantiza una excelente calidad y

de puerta, si se desea realizar una instalación con amortiguación a un lado, el ancho mínimo deberá ser

lados esté será de 850 mm (para instalaciones hasta 60 kg). La aplicación para vidrio de la SV-Roller se realiza utilizando las ya conocidas pinzas de Saheco (SV-2), las cuales no necesitan mecanización del vidrio.

Saheco presents the new SV-Roller + Softbrake system, a system for sliding panes of up to 60 kg in weight. The new SV-Roller system is characterised by complete concealment of its mechanism within the upper

helps to improve the way the system is integrated into the space. Also, the new softbrake (damper brake) which the SV-Roller also comprises is built into the

the 10 mm diameter hydraulic metal shock absorber ensures excellent quality and durability. With regard to the minimum door widths, if an installation with damping on one side is desired, the minimum width must be 650 mm, while if both sides are preferred, it will be 850 mm (for installations up to 60 kg). The SV-Roller application for glass is made using the already familiar Saheco (SV-2) grips, which do not require machining the glass.

Saheco presenta il nuovo sistema SV-Roller + Softbrake, sistema per

nonché per avere la parte inferiore dello stesso piatta; la qual cosa aiuta a migliorare l’integrazione del sistema nel suo spazio. Inoltre, il nuovo softbrake (freno ammortizzatore) di cui è dotato il SV-Roller rimane integrato anche

in maniera tale da conferire maggior delicatezza di scorrimento, accompagnando

L’ammortizzatore idraulico metallico da 10 mm di diametro garantisce una qualità eccellente ed una notevole durata. Per quanto riguarda le larghezze minime della porta, se si desidera realizzare un’installazione con ammortizzatore su di un lato, la larghezza minima deve essere di 650 mm, mentre se si lo si preferisce

L’applicazione per vetro dell’SV-Roller si realizza utilizzando le già note pinze Saheco (SV-2), che non richiedono la lavorazione del vetro.

Saheco présente le nouveau système SV-Roller + Softbrake, mécanisme pour panneaux coulissants d’un poids maximum de 60 kg. Le nouveau système SV-Roller se distingue par la dissimulation totale de son mécanisme à

pour une meilleure intégration du système dans l’espace. De même, le nouveau Softbrake (frein amortisseur) qui compose le SV-Roller se fond dans

recul. En outre, l’amortisseur hydraulique métallique de 10 mm de diamètre vous garantit une qualité et durabilité sans pareilles. En termes d’épaisseur minimale de porte, si l’on souhaite un amortissement sur un seul côté, il faut prévoir 650 mm d’épaisseur minimale tandis que pour un amortissement des deux côtés il faut prévoir 850 mm d’épaisseur (pour des installations de 60 kg maximum). L’application pour verre du modèle SV-Roller fait appel aux pinces bien connues de Saheco (SV-2), lesquelles n’exigent pas l’usinage du verre.

60 kg+freno amortiguador

33

43

1043

10

Calculating Glass Height = Height - 86mmVertical Adjustment = ± 2mm

A = H - 86mm

10 -1210 -12

A SOFTBRAKE 60 kg SIMPLE / SINGLE / SINGOLO / SIMPLE

S-A60-A80 para techo

Juego de pinza regulable SV-2SV-2 adjustable clamp setSet pinza regolabile SV-2Jeu de pince réglable SV-2

Conjunto roldana S-A80 + conjunto tope freno rollerS-A80 roller assembly + roller brake end stop assembly

Ensemble galet S-A80 + ensemble butée de frein Roller

Juego Softbrake Roller 60 Kg60 kg Softbrake Roller setSoftbrake Roller 60 kg set Ensemble Softbrake Roller 60 kg

00 80 2300 80 3300 80 53

00 80 88

00 80 80

00 80 06

1

1

1

1

2 m3 m5 m

Cód.

S-A60-A80 para techo

Juego de pinza regulable SV-2SV-2 adjustable clamp setSet pinza regolabile SV-2Jeu de pince réglable SV-2

Juego Softbrake Roller 60 Kg60 kg Softbrake Roller setSoftbrake Roller 60 kg set Ensemble Softbrake Roller 60 kg

00 80 2300 80 3300 80 53

00 80 88

00 80 06

1

1

2

2 m3 m5 m

Cód.

B SOFTBRAKE 60 kg DOBLE / DOUBLE / DOPPIO / DOUBLE

00 80 58 00 80 60 00 80 62

00 80 59 00 80 61 00 80 63

1

1

1

1

1

1

Opcional / Optional / Opzionale / Optionnel

Tapeta aluminio anodizadoWhite lacquer stainless steel trimRivestimento in alluminio anodizzatoCache alu anodisé

Tapeta lacada blancaWhite lacquer stainless steel trim Rivestimento laccato biancoCache laqué blanc (Ral 9010)

Tapeta aluminio brillo Inox.Stainless steel shine aluminium trim coverRivestimento alluminio inox lucidoCache aluminium brillant inox

End trim cover

Anodizado plataAnodised silverAnodizzato argento Anodisé argent

BrilloPolishedLucido Brillant

BlancoWhiteBiancoBlanc

00 64 34 (3 m)

00 64 35 (3 m)

00 64 36 (3 m)

00 80 58 (8 mm) 00 80 59 (10 mm)

00 80 60 (8 mm) 00 80 61 (10 mm) 00 80 62 (8 mm) 00 80 63 (10 mm)

Cód.

*Soporte pared grande (incluye tornillo y tuerca)Large wall support (includes nut and bolt)Supporto parete grande (compresi vite e dado)Support mural grand format (vis et écrou inclus)

00 66 58

2m= 10 | 3m= 15 | 5m= 25* soportes / supports / sostegni / supports

ELEVATION & CROSS-SECTION (DIMENSIONS - MM)

TOP SIDEMOUNT MOUNT

76 76

THE SAHECO UNIVERSAL CLAMPING SYSTEM HAS BEEN DESIGNED AND TESTED TO HOLD SIGNIFICANT WEIGHT WITHOUT THE NEED FOR HOLES IN GLASS. ALL CLAMPS CAN BE ADJUSTED TO SUIT DIFFERENT GLASS THICKNESSES BY EASILY LOOSENING OR TIGHTENING THE GRUB SCREWS

120KG VERSION COMING SOON

75-77 Ricketts RoadMt Waverley VIC 3149

18 000 999 1803 8562 0899sales@fgs.com.au www.fgs.com.au

.............................................ORDERING PROCESS - SPECIFY THE FOLLOWING. Choose required kit - all kits suit a Single Door Application up to 80kg and include the following components:

Item No SV-ROLLER 80 KIT 1 SV-ROLLER 80 KIT 2

Item Description Single Soft Brake Kit with 3000mm track* Double Soft Brake Kit with 3000mm track*

1 x 3000mm Single Track

2 x clamps

1 x Bottom Guide

2 x rollers

2 x Soft Brake Mechanism or 1 Soft Brake Mechanism & 1 x Door Stop

Screws & Tools required

OPTIONAL EXTRAS Item No. Notes

SV-ROLLER TRK CAP Order 1 pair of End Caps for Top Track

SV-CLAMP COVER-30 Order Clamp Cover length (3000mm) to conceal front & rear clamps

SV-CLAMP COVER CAP10 SV-CLAMP COVER CAP12 SV-CLAMP COVER CAP14

Order 1 pair of End Caps per panel for Clamp Cover to suit glass thickness

SV80-BRACKET If track is side mounted, Side Fixed Wall Brackets are required every 200mm

* ROLLER TRACK & CLAMP COVER LENGTHS ARE SUPPLIED IN THE SIZES LISTED. CUSTOMERS ARE RESPONSIBLE FOR CUTTING LENGTHS TO EXACT SIZE AS REQ.

BR

-SV RO

LLER - M

AR 16