2017 PRODUCT CATALOG
®
COMING 2017The NEW ALG Defense GALIL Trigger (AGT-UL)See Page 11 for pricing and more information!
4
PERFORMANCE ADVANTAGES FOR
THE SHOOTERALG triggers are smoother and sharper than your traditional
stock trigger. This is accomplished by polishing the sear
surfaces smooth and hard-lubing the trigger components.
Sear geometry has not been changed from the standard
profile so the high reliability that the stock trigger is known
for is unchanged. The trigger and hammer are made from
true 8620 alloy steel military specification castings, correctly
carburized, quenched and tempered for high surface hardness.
The disconnector is made of 1070 High Carbon steel and is
properly austempered into the correct range of hardness.
The springs are corrosion resistant and meet U.S. Military
specifications. A full force hammer spring is used for positive
ignition of all types of ammunition. The trigger and hammer
pins are improved over stock mild steel by using 4140
Chrome-Moly steel that has been quenched and tempered.
The pins are centerless ground to a fine finish. The diameter is
0.001” larger than stock to reduce play in the trigger assembly
while retaining a slip fit into the weapon’s lower receiver.
Pull weight is above the U.S. Military minimum pull weight of
5.5 lbs. but does not reach near the upper limit of 9.5 lbs.
ADVANTAGES FOR THE ARMORERALG triggers are enhanced standard triggers, so maintenance
and installation procedures are unchanged. Trigger assembly
parts may be interchanged between triggers, so there are no
matched sets. As a trigger meeting the essential U.S. Military
trigger specifications for the M4 Carbine, ALG triggers can
be substituted for lower performing stock triggers while still
staying in compliance with Unit or Departmental requirements.
A R T R I G G E R S
5
6
The ALG Defense Quality Mil-Spec Trigger is designed to provide an affordable
improvement for the AR-15 rifles. The pull of the QMS is very similar to a standard
mil-spec trigger, however the majority of the associated grittiness of the stock trigger
pull has been removed while the well known reliability of a stock trigger remains. The
pull weight is not lower than the M4/M16 minimum weight specification of 5.5 lbs.
Generally, the pull weight is around 6.5 lbs.
Retail Price: $49
QUALITY MIL-SPEC TRIGGERQMS
7
ADVANCED COMBAT TRIGGERACTThe ALG Defense Advanced Combat Trigger is very similar to a standard mil-spec
trigger, however, like the QMS, it is sharper and the grittiness of the stock trigger
pull has been removed while the traditional reliability of a stock trigger remains.
The ACT is Nickel Teflon and Nickel Boron processed and the polished sears have
been hard lubed to create a permanent lubricated surface for a consistently
smooth pull.
The ACT-Nano Weapon trigger features a hard lubricated trigger coating designed
by our sister company, Nano Composite Coatings, Inc (NCC). The NCC coating
is a self lubricating hard coating in the same family as Picatinny’s Durable Solid
Lubricant (DSL). The finish is lubricious and extremely corrosion resistant to improve
reliability and lessen the need for preventative maintenance. The smooth pull of the
ACT-Nano Weapon trigger will be available in the Spring of 2017.
The ALG purple hammer spring comes installed on the ACT
and ACT-Nano hammer providing an approximate pull
weight of 4.5 lbs. This spring is perfect for individuals using
their rifle for recreational purposes or target shooting. Also,
a tan hammer spring is included to provide an approximate
pull weight of 6.0 lbs. which meets the minimum pull weight
of 5.5 lbs. in the M4 Carbine specifications.
Retail Prices ACT: $69 ACT NANO Weapon: $75
ACT-Nano Weapon - Coming Soon!
ACT
8
The AK Trigger line has been revamped for 2017! The new lineup provides the
shooter with more economical options as well as conventional Combloc styling.
The new AKT trigger features the traditional AK style trigger bow at the retail
cost of $42. The 2016 AKT is being renamed the AKT-Enhanced with Lightning
Bow. The 2016 AKT-Enhanced trigger’s new designation is the AKT-Ultimate
with Lightning Bow. All ALG Defense triggers are single stage and fit AK47 and
AK74 variant platforms. The AK triggers come in several variations all of which
are machined from gun quality alloy steel and provide 3 parts towards 922(r)
Compliance.
A K T R I G G E R S
9
10
AK TRIGGERAKT • AKT-EL • AKT-ULThe new AKT features a traditional AK curved trigger bow with a shorter trigger
pull than the stock trigger. The trigger is coated in a corrosion resistant Manganese
Phosphate finish. At a starting point of $42, it is an ideal upgrade to any AK.
The AKT-Enhanced with Lightning Bow (AKT-EL) features a smoother and shorter
trigger pull than the stock trigger and is ideal for combat and home defense use.
It has a Manganese Phosphate finish which is the same process used on stock AK
triggers.
The AKT-Ultimate with Lightning Bow (AKT-UL) features a pull that is even lighter
and has a much crisper break which is ideal for precision and target shooting.
The AKT-EL and AKT-UL both feature a unique trigger bow known as the Lightning
Bow, which produces a very comfortable feel to the user over the stock trigger.
Retail PricesAKT: $42AKT-Enhanced with Lightning Bow: $65AKT-Ultimate with Lightning Bow: $90
AKT
AKT-ULAKT-EL
11
GALIL TRIGGERAGT-ULThe ALG Galil Trigger–Ultimate with Lightning Bow (AGT-UL) is a single stage trigger
based on the AKT-UL and designed for the IWI Galil Ace rifle and pistol platform. The
AGT-UL is machined from gun quality alloy steel and utilizes a Lightning Bow. The
AKT-UL features a smooth trigger that is shorter and crisper than the stock 2 stage
trigger. This design is ideal for precision and target shooting. The recommended
pull weight of the AGT-UL is approximately 3.5 lbs.
Retail Price: AGT-UL: $95
12
E R G O N O M I C M O D U L A R R A I L SERGONOMICInstead of four sharp and jagged M1913 rails
spaced at 90 degree intervals, like a traditional
quadrail, the ALG EMR is fully ergonomic,
maintaining a comfortable rounded shape
throughout the length of the rail. The V0, V1,
and V2 have a rounded top allowing a shooter to
easily wrap his or her thumb over the top of the
EMR as many shooters like to do with a
forward grip.
SET-UP IS MODULAR AND FLEXIBLEV0 and V1 Accessory rails can be attached
anywhere along the length of the rail in 45°
intervals, including the standard 12, 3, 6 and 9
o’clock positions.
V0-E The essential rail for your rifle. Accessory
rails can be attached at the fore end of the rail at
the 45° intervals.
V2 and V3 Accessory rails can be attached
anywhere along the length at 60° intervals. The
V2 provides a machined picatinny rail section at
the fore end of the rail at the 12 o’clock position.
The V3 provides a full-length M1913 picatinny rail
at the 12 o’clock position.
FREE FLOATINGThe weapon’s barrel is completely free floating
when an ALG EMR is mounted. No force is put
into the barrel from slings or bipods that could
affect point of aim.
STRONGThe ALG EMR is machined from aircraft grade
6061-T6 aluminum extrusion.
RIGIDCurrent infantry doctrine makes extensive use of
accessories that require attachment to a weapon
rail. Flashlights, visible and infrared lasers, night
vision and thermal sights all require a rigid
weapon rail so that zero is not changed when
a bipod or sling is used to support the weapon
from the rail. The ALG EMR is a rigid interface for
weapon accessories due to its precisely machined
proprietary barrel nut and secure rail interface
and clamping arrangement.
LIGHTWEIGHTUse of extruded 6061-T6 aircraft grade aluminum
in an ALG EMR give the entire assembly an
excellent strength and performance to weight
ratio.
ACCESSORY RAILS EASY TO INSTALLThe V0 accessory rails are fastened to steel slide
nuts and are captured in channels configured
in the rail ID. Slide nuts are much more soldier
13
proof than inserts. A cross-threaded screw can easily
be repaired with the replacement of a slide nut. It takes
literally seconds to install or remove an accessory rail
without standing on your head to deal with non-captured
plate nuts.
ACCESSORY RAILS ARE SECURELY
ATTACHED The ALG EMR V0 accessory rails are designed to
securely attach to the rail with the supplied steel slide
nuts. The slide nuts take the place of individual nuts
which are difficult to tighten and maneuver inside the
rail. By screwing the accessory rail screws directly into
steel and not the aluminum rail, the attachment method
is strong and vibration resistant. Ergonomic Modular
Rails are also available with M-LOK configurations,
which allow the direct attachments of third party
accessories, taking advantage of the rock solid
M-LOK design.
RAIL ASSEMBLY IS EASY TO INSTALLEach ALG EMR comes with a precision machined, 2”
long barrel nut that is machined from aircraft grade
7075-T6 aluminum and hardcoat anodized for a durable
surface. The proprietary ALG EMR barrel nut wrench is
used to tighten the barrel nut to the upper receiver. The
ALG EMR barrel nut is required to be indexed to the gas
tube, and includes all of the necessary shim kits and
instructions to do so. Next, the rail is slid onto the barrel
nut with a fit that precisely aligns the rail to the barrel.
After indexing the rail to the receiver, six mounting
screws are tightened and the rail is secure.
RAIL IS EASY TO REMOVEJust by removing six screws the ALG EMR can be
slid off of the barrel nut for cleaning or gas system
maintenance. As quick as it is removed the ALG EMR
can be re-installed with the precise barrel nut to rail fit
maintaining sight and accessory zero.
14
ERGONOMIC MODULAR RAILEMR V0The EMR V0 is machined from extruded 6061-T6 aluminum and utilizes a proprietary
rock solid 2” barrel nut machined from 7075-T6 aluminum. A trick wrench will apply
the proper torque and index the barrel nut to the gas tube all at the same time. No
torque wrench is required. The EMR is also very lightweight, weighing in at 8.96 oz. for
a 10” including installation hardware. Since the EMR has no top picatinny rail, it is very
ergonomic for those who use a thumb over style grip. A co-witness rail section is included
which can be mounted anywhere along the 12 o’clock position of the rail and will allow a
front sight to be mounted and in proper alignment of the upper receiver.
The EMR V0 features two integrated anti-rotational QD slots at the base of the rail
at the 2 and 10 o’clock positions. It also includes a removable rail section which can
be mounted at the 3, 6 and 9 o’clock locations as well as the upper and lower 45°
locations, making the EMR V0 extremely modular.
Retail Prices 10” Black EMR V0 Handguard: $135 13” Black EMR V0 Handguard: $145 DDC / Gray / Purple: +$15
15
ERGONOMIC MODULAR RAILEMR V0-EThe newest and most affordable member of the EMR family is the V0-E (V Zero –Essential)
rail. This sleek rail is machined from extruded 6061-T6 aircraft grade aluminum and
utilizes a proprietary rock solid 2” barrel nut machined from 7075-T6 aluminum. The
V0-E allows accessory rails to be attached at the muzzle end of the rail in the 45°
intervals, including the standard 12, 3, 6 and 9 o’clock positions. The machined in
flat sections of the rail allow the shooter to maintain a comfortable grip.
The EMR V0-E does not include accessory rails which allows this rail to be the most
affordable of the EMR line with an MSRP of $80 for a 10” black rail. The ALG EMR
V0-E features two integrated anti-rotational QD sling swivel holes at the 2 and 10
o’clock positions at the base of the rail. Combining modern design with affordability
will make the ALG EMR V0-E your go to upgrade for any AR-15 build.
Retail Prices 10” Black EMR V0-E Handguard: $80 13” Black EMR V0-E Handguard: $85 15” Black EMR V0-E Handguard: $90
16
The Ergonomic Modular Rail V2 with Magpul M-LOK support allows the user to
mount an array of third party accessories and customize their weapon platform to
suit their needs. M-LOK accessories can be attached along the length of the rail at
2, 4, 6, 8 and 10 o’clock positions. The EMR V2 M-LOK also features two integrated
anti-rotational QD slots at the base of the rail at the 2 and 10 o’clock positions.
The EMR V2 has a machined M1913 picatinny rail section at the muzzle end of the
rail at the 12 o’clock position. The machined M1913 section is ideal for attaching
front sights, lasers, IR illuminators, lights and any other optic or sling related M1913
compatible accessory.
Retail Prices 10” Black EMR V2 Handguard: $145 13” Black EMR V2 Handguard: $155 15” Black EMR V2 Handguard: $165 DDC / Gray / Purple: +$15
ERGONOMIC MODULAR RAILEMR V2 M-LOK
17
ERGONOMIC MODULAR RAILEMR V3 M-LOK Like the V2, the V3 M-LOK support allows the user to mount an array of third party
accessories and customize their weapon platform to suit their needs. Magpul M-LOK
accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o’clock
positions.
The EMR V3 M-LOK also features two integrated anti-rotational QD slots at the base
of the rail at the 2 and 10 o’clock positions. The primary difference of the EMR V3 is
its full-length M1913 picatinny rail at the 12 o’clock position. The machined M1913
section is ideal for attaching front sights, lasers, IR illuminators, lights and any other
optic or sling related M1913 compatible accessory.
Retail Prices 10” Black EMR V3 Handguard: $145 13” Black EMR V3 Handguard: $155 15” Black EMR V3 Handguard: $165 DDC / Gray / Purple: +$15
18
ERGONOMIC MODULAR RAILEMR KEYMODThe ALG EMR KeyMod line is available in 8" V1 as well as 8" V2 and 10" V2 Rails. The Ergonomic Modular Rail allows the user to mount an array of third party KeyMod accessories and customize their weapon platform to suit their needs.
The 8" V1 KeyMod allows KeyMod accessories to be attached along the length of the rail at the 3, 6 and 9 o'clock positions as well as the upper and lower 45° locations. Also, the Ergonomic Modular Rail V2 KeyMod allows accessories to be attached along the length of the rail at 2, 4, 6, 8 and 10 o’clock positions. The EMR V1 and V2 KeyMod also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o’clock positions.
The primary difference between the EMR V2 and V1 KeyMod is that the V2 utilizes a machined M1913 picatinny rail section at the muzzle end of the rail at the 12 o’clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators and lights.
Retail Prices 8" EMR V1 Keymod Handguard: $110 8" EMR V2 Keymod Handguard: $110 10" EMR V2 Keymod Handguard: $115
19
20
L U B R I C A N T SThe ALG Go-Juice line of lubricants has grown to include 0000 Very Thin
Grease. The ALG 0000 VTG has joined the line to keep your gun running
in tough conditions without hesitation. Both products in the ALG Go-Juice
line maintain ultra high lubricity and a non-gumming formula which allows
your guns to be lubricated and stored without fear of locking up. The ALG
Defense Go-Juice line will be your “Go To Firearm Lubricant” for all of your
shooting requirements.
21
22
ALG GO-JUICEEngineered specifically for the total-loss, boundary lubrication system that is
characteristic of all firearms, ALG Go-Juice (GJ) possesses unique properties that
will keep your weapon running in the most adverse conditions.
The most important property of a firearm lubricant is its lubricity or “slickness.”
In comparison to military grade CLP, Go-Juice is 500% more slick as determined
by laboratory tests. Other key characteristics of a good gun lube are corrosion
resistance and long term stability or resistance to breaking down that leads to
gumminess and a gun that won’t function. ALG Go-Juice is made up of highly
oxidation resistant molecules that perform exceptionally well in ALG Defense’s
accelerated aging tests and salt spray tests.
As a biosynthetic oil, the fundamental building blocks of Go-Juice’s oil molecule is
a GMO oil seed that has been bred specifically for its lubrication properties. Being
an engineered bio-based oil, ALG Go-Juice needs none of the heavy metals and toxic
additives that other lubricants can use. Therefore, ALG Go-Juice needs no hazardous
label and testing on synthetic human tissue has shown no tendency to even
irritate skin.
Perfect for automatic weapons and concealed carry guns, we think that you will find
ALG Go-Juice to be your ultimate “Go To Firearm Lubricant.”
Retail Price: $11.50
23
GO-JUICE0000 VERY THIN GREASEALG Defense is proud to announce the release of our next product in the Go-
Juice gun lubricant line, 0000 Very Thin Grease. 0000 VTG meets four important
characteristics of a grease type firearm lubricant: ultra high lubricity, ultra high
staynacity*, non-gumming and rust resistance. The 0000 (Zero, Zero, Zero, Zero)
name originated from tests completed on the consistency of the grease showing that
0000 VTG is thinner than the thinnest commercially available 000 NLGI grease.
Ultra high lubricity which is a key characteristic in both Go-Juice and 0000 VTG will
make your weapon run in the most adverse conditions without hesitation.
Ultra High Staynacity means ALG 0000 VTG allows you to evenly apply grease
across the surface without run off. For example, after lubricating a holstered
weapon, there will be no drainage of grease in the bottom of your holster.
ALG 0000 Very Thin Grease is made of oxidation resistant molecules which will
prevent gumming allowing the gun to be stored without fear of it locking up. Also,
B117 ASTM salt spray testing was performed to ensure a corrosion resistant
formula.
The lubricant stays in place and will not run off to keep your weapons running in
tough conditions, 0000 Very Thin Grease will be your “Go To Firearm Lubricant.”
Retail Price: $13.50
*Staynacity
Stā’nas dē / Origin: 2015-2016; Middle Age German
Definition: The ability of a lubricant to stay where it’s applied.
e
24
A C C E S S O R I E SALG Defense offers a wide variety of accessories for multiple different
weapon platforms such as the AK 74 / AK47, AR15, AR10 and Glock
pistols. Our accessories receive the same level of quality and attention to
detail as the rest of the ALG lineup. From the 6-Second mount to the AK
Springs we research, test, develop and strive to achieve the highest quality
for our consumers.
25
26
ALG DEFENSE SpringsAK BRAIDED MAIN SPRINGThe ALG AK Braided Main Spring is a replacement spring for the AK47/74 platform
rifles. This replacement option is manufactured in the United States from three
strands of music wire braided together.
Retail Price: $9
AK HIGH ENERGY MAIN SPRINGThe ALG High Energy Main Spring is a performance replacement spring for the
AK47/74 platform rifles. It is a chrome silicon single wire spring fabricated per
ASTM A401 specifications. The ALG High Energy Main Spring develops 25% more
torque over a standard factory main spring, lowering lock time and also increasing
the consistency of primer ignition.
Retail Price: $9.50
ALG AK RECOIL SPRING ALG AK recoil spring is a one of a kind design, it is manufactured from chrome
silicon steel which resists impact shock and relaxation. The 2 to 3 dead coils in the
center change the natural frequency of the spring, which prevents harmonics from
damaging the spring and reducing its free length.
Retail Price: $12
AK BRAIDED MAIN SPRING
AK HIGH ENERGY MAIN SPRING
ALG AK RECOIL SPRING
27
FORGED SLING SWIVELFSSThe ALG Forged QD Sling Swivel is a lightweight but heavy-duty sling swivel option.
The standard QD configuration makes it compatible with any device that accepts
QD accessories. The FSS weighs in at roughly 0.4 ounces and is about half the
weight of similar steel QD sling swivel assemblies. The FSS is forged from 7075-T6
aluminum, which is the same aluminum typically used to make upper and lower
receivers. This process allows the FSS to be very strong and can withstand pull forces
of up to 750 lbs.
Retail Price: Black: $32 DDC: $34
28
ALG FLARED MAGWELLAFMThe ALG Flared Magwells (AFM) are precision machined from billet 6061-T6 aluminum and designed to seamlessly fit Gen 3 and Gen 4 Glock 17, 22, 24, 31, 34 and 35 pistols without modification to the AFM or the frame itself. The Supersonic Gen 4 Magwell will accommodate Glocks without backstraps. The Supersonic Gen 4 Magwell with medium backstrap and Federal versions will accommodate Glocks which utilize medium backstraps. The AFM is finished using a type 3 hardcoat anodize process which allows the AFM to be long lasting and durable.
The AFM allows for rapid reloading of magazines by decreasing the precision required to insert the magazine into the pistol. Additionally, the AFM is designed to allow magazines to freely drop without modification to the pistol or the AFM, which is one of the most common issues found when using aftermarket magwells. The flared design also allows the AFM to act as a ledge to spread the recoil impulse into the bottom of the gripping hand, allowing the user to return more control of his or her pistol.
Note: Since the AFM is made from aircraft aluminum and hardcoat anodized it should be recognized that it will lightly scratch or scuff the pistol where it comes in contact with the plastic pistol frame.
Retail Prices Gen 3 Black: $95 DDC / Gray / Purple: $105
Gen 4 No BackStrap: $95 Gen 4 w/ Medium Beavertrail: $95 Gen 4 Federal w/ Medium Beavertail: $95 DDC / Gray / Purple: $105
*The Federal w/ Beavertail Magwell is designed to slightly expose the stock magazine while inserted into the Glock. The reduced size aids with inserting a stock magazine during emergency reloads.
SUPERSONIC GEN 4 FEDERAL
SUPERSONIC GEN 4
29
6-SECOND MOUNTS6SMThe ALG Defense 6-Second Mount was designed when a counter-terrorism unit
approached ALG with a strict set of criteria. When entering a linear environment,
such as an airplane or bus, the team’s primary weapon was their pistol and they
were looking for a fast sighting method that was rugged and robust. Red dot
scopes mounted directly to their pistol slides were showing a high failure rate due
to extreme acceleration and deceleration of the slide. The balance of the pistols
was thrown off from the rearward scope mounting position, and the slides were
weakened from machining a pocket for the scopes into the top of the slide.
The name, 6-Second Mount, comes from a description used by one of the operators:
“The fight lasts 6 seconds... Either they’re dead or you’re dead, and aggression saves
the day.”
The ALG 6-Second Mount is available in two different models to accommodate
the Aimpoint T1 and the Trijicon RMR red dot optics. Mounting an optic to your
weapon decreases engagement time, allowing for faster and more accurate hits
on target. By separating the sight from the reciprocating slide it allows the pistol
to function properly without the added mass of the optic sight, and produces a
favorable weight distribution.
The ALG 6-Second Mount is machined from 6061-T6 aluminum and designed to fit
Gen 3 and Gen 4 Glock 17, 22, 24, 31, 34 and 35.
Retail Prices Black T1 or Black RMR: $250 DDC / Gray / Purple: $265
T1 MOUNT
RMR MOUNT
SUPERSONIC GEN 4
30
SINGLE CHAMBER BRAKE SCBThe ALG Single Chamber Brake is machined from 4140 steel and is Black Nitride
processed for wear and corrosion resistance. The SCB is sized for 5.56mm barrels
and can be easily attached to any AR15 platform that has ½”-28 muzzle threads.
The SCB includes a peel washer so that the SCB can be properly aligned with the
barrel. The flat surface on the inside of the SCB gets positioned at 6 o’clock and the
upper compensator port will be positioned at the 12 o’clock position when attached
to the barrel. This allows the gas to expel to the sides and upwards away from the
ground, reducing dust and debris from being kicked up when shooting from the
prone position. The unique design also aids in decreasing recoil and increasing
accuracy.
Retail Price: $55
SIDEWINDER 556SW556ALG Defense’s new Sidewinder muzzle brake is machined from 17-4 Stainless Steel
and fits ½”-28 threaded 5.56mm barrels. The vents are angled upward at 3 and 9
o’clock deflecting gas to the sides, away from the ground, reducing dust and debris
when firing from the prone position. The ALG Sidewinder includes a peel washer
for proper timing and concentricity during installation. The unique design reduces
muzzle rise and recoil, allowing the shooter to quickly get back on target for rapid
follow up shots. Available in Black Nitride finish, the Sidewinder is form inspired by
function, a unique addition to your weapon system.
Retail Price: $45
31
NOTES
NOTES
36
ALG Defense • North Wales, PA 19454 • 610.635.8937 • algdefense.com
Top Related