T.D. Williamson, Inc.
P.O. Box 3409Tulsa, OK 74101-3409
Phone: (918) 447-5000Fax: (918) 446-6327
The Standard For Operator Training
TM
LineMaster
TDW LineMaster Training is an API Data Provider and Approved Contractor. LineMaster
Training also is a Veriforce Authorized Evaluator.
T.D. Williamson, Inc., provides the most comprehensive hot tapping, plugging, pigging, and composite wrap instal-lation instruction available in compliance with Department of Transportation covered tasks, standards and requirements. Rigorous hands-on training and operator qualification LineMaster programs are TDWs commitment to the industry.
LineMaster Training assists you with ensuring your technicians are trained at the highest level attainable. In our state-of-the-art facilities and with a pressurized simulated pipe-line, TDW's LineMaster Training program is an in-depth series of classes designed to fulfill DOT Pipeline Safety Operator Qualification rules. To meet DOT requirements, training programs must include classroom time, written exams and hands-on performance verifications. TDW's LineMaster Training exceeds these requirements.
TDW LineMaster Training is the best in the business. The company youve trusted with your piping maintenance needs for more than 80 years has the credentials and experience to train your technicians and operators effectively and efficiently.
2 0 0 9 S C H E D U L E
2009TM
The Standard For Operator TrainingLineMaster
[Hot Tapping Plugging Pigging Composite Wrap]
All classes include instruction for equipment operation and maintenance. See reverse side for full class descriptions.
April:April 7-8 Job Planning ClassApril 13-17 Transmission ClassApril 20-23 Mechanics ClassApril 27-May 1 Distribution Class
May:May 6-7 Pigging Technology ClassMay 11-15 Transmission ClassMay 18-22 Distribution ClassMay 27-28 T-101 Class
June: June 1-5 Transmission Class
August: Aug. 25-26 T-101 Class September: Sept. 2-3 Job Planning ClassSept. 9-10 Pigging Technology Class
October: Oct. 5-9 Transmission ClassOct. 12-16 Distribution ClassOct. 19-23 Distribution ClassOct. 26-30 Transmission Class
November: Nov. 2-6 Transmission ClassNov. 9-12 Mechanics Class
AlAll l clclasses ini clludude e ininsttstruructctioion n fofoforr eqequiuipmpmenentt opopereratatioion andd maini tenance. See reversee side for full class descripptions.
April:ApApriririril ll 7-7-8 8 888 J J J JJobobobb PP P laalannnnnnnininininng g g g ClCClC asasssssApApApApApriiril 13131313-1--17 7 7 TTT T Trararararansnsssn mimimm ssssssioioiooonnnn n ClClClClasassassssApApririririril l l ll 202020-2-2223 333 MMMecececcchahahahahaniniicscscscs CC lalassssssssAppA riril l 22272727-MMMayayy 1 11 DiiDiststririririribububububutitiit onononon CCClalassssss
May:MMaMaaay yy 6-6-7 77 P Pigiggggigigg ngng Tece hnhnnoloolo ogoggy y ClClClasassssssMaMaay yy 11111 -1-15 5 T Traaaaansnsnsnn mimiimissssssioion n ClClCC asasssMaMay y yyy 18181818-2-2-22222 2 D Distribibibibibututioion nn ClClC asassssMaaaMayy 27-28 T-101 CCCClalasssss
June:JuJuJunenene 1 11-5-5-5 TT Trararansnsnssmimissssioion n ClClasasss
August: AuAuAuAug.g.g.g. 2 2 2 5-5-5-262626 T-T-T-10101 1 1 ClClClClClaaasasassss
September: SeSeSeS ptptptpt. 2-2-3 33 JoJoJoJobbb bb PlPlPlPlP ananannininggngg CC CClalalalassssssssSeSeSeSSeptptptpt. . . 9-9-9-1010101 PiPigggggininingg g g TeTeTeTechchchnonoolologygy CC CClalalalassssssss
October: OcOcOcO tt. 555 5-9-9-9 TrTrT anansmmsmisisisissisisisiononoo CCClalalassssssOcOct.t.tt 1 1 1 12-2-1616166 DiDiD ststrribubub tititiononnn C C C ClalassssOcOcOcOctt.t 19-2323222 DiDiDisttsts riribubutititiononon CC C lalalassssssOct. 26-30000 TrTrTranaa smsmmissisi sisionon CC Clalalasssssss
November: Nov. 2-6 Transmissssioion n ClClC asasssssssNoNoNoN v.vv 9999-111-12 222 MMM Mececchhahaninicscs C Clalassss
Comprehensive Operator Qualification Training at its BestComprehensive Operator Qualification Training at its Best
HANDS-ON IN-DEPTH and
T.D. Williamson, Inc.
P.O. Box 3409Tulsa, OK 74101-3409
Phone: (918) 447-5000Fax: (918) 446-6327
The Standard For Operator Training
TM
LineMaster
TDW LineMaster Training is an API Data Provider and Approved Contractor. LineMaster
Training also is a Veriforce Authorized Evaluator.
T.D. Williamson, Inc., provides the most comprehensive hot tapping, plugging, pigging, and composite wrap instal-lation instruction available in compliance with Department of Transportation covered tasks, standards and requirements. Rigorous hands-on training and operator qualification LineMaster programs are TDWs commitment to the industry.
LineMaster Training assists you with ensuring your technicians are trained at the highest level attainable. In our state-of-the-art facilities and with a pressurized simulated pipe-line, TDW's LineMaster Training program is an in-depth series of classes designed to fulfill DOT Pipeline Safety Operator Qualification rules. To meet DOT requirements, training programs must include classroom time, written exams and hands-on performance verifications. TDW's LineMaster Training exceeds these requirements.
TDW LineMaster Training is the best in the business. The company youve trusted with your piping maintenance needs for more than 80 years has the credentials and experience to train your technicians and operators effectively and efficiently.
2 0 0 9 S C H E D U L E
2009TM
The Standard For Operator TrainingLineMaster
[Hot Tapping Plugging Pigging Composite Wrap]
All classes include instruction for equipment operation and maintenance. See reverse side for full class descriptions.
April:April 7-8 Job Planning ClassApril 13-17 Transmission ClassApril 20-23 Mechanics ClassApril 27-May 1 Distribution Class
May:May 6-7 Pigging Technology ClassMay 11-15 Transmission ClassMay 18-22 Distribution ClassMay 27-28 T-101 Class
June: June 1-5 Transmission Class
August: Aug. 25-26 T-101 Class September: Sept. 2-3 Job Planning ClassSept. 9-10 Pigging Technology Class
October: Oct. 5-9 Transmission ClassOct. 12-16 Distribution ClassOct. 19-23 Distribution ClassOct. 26-30 Transmission Class
November: Nov. 2-6 Transmission ClassNov. 9-12 Mechanics Class
AlAll l clclasses ini clludude e ininsttstruructctioion n fofoforr eqequiuipmpmenentt opopereratatioion andd maini tenance. See reversee side for full class descripptions.
April:ApApriririril ll 7-7-8 8 888 J J J JJobobobb PP P laalannnnnnnininininng g g g ClCClC asasssssApApApApApriiril 13131313-1--17 7 7 TTT T Trararararansnsssn mimimm ssssssioioiooonnnn n ClClClClasassassssApApririririril l l ll 202020-2-2223 333 MMMecececcchahahahahaniniicscscscs CC lalassssssssAppA riril l 22272727-MMMayayy 1 11 DiiDiststririririribububububutitiit onononon CCClalassssss
May:MMaMaaay yy 6-6-7 77 P Pigiggggigigg ngng Tece hnhnnoloolo ogoggy y ClClClasassssssMaMaay yy 11111 -1-15 5 T Traaaaansnsnsnn mimiimissssssioion n ClClCC asasssMaMay y yyy 18181818-2-2-22222 2 D Distribibibibibututioion nn ClClC asassssMaaaMayy 27-28 T-101 CCCClalasssss
June:JuJuJunenene 1 11-5-5-5 TT Trararansnsnssmimissssioion n ClClasasss
August: AuAuAuAug.g.g.g. 2 2 2 5-5-5-262626 T-T-T-10101 1 1 ClClClClClaaasasassss
September: SeSeSeS ptptptpt. 2-2-3 33 JoJoJoJobbb bb PlPlPlPlP ananannininggngg CC CClalalalassssssssSeSeSeSSeptptptpt. . . 9-9-9-1010101 PiPigggggininingg g g TeTeTeTechchchnonoolologygy CC CClalalalassssssss
October: OcOcOcO tt. 555 5-9-9-9 TrTrT anansmmsmisisisissisisisiononoo CCClalalassssssOcOct.t.tt 1 1 1 12-2-1616166 DiDiD ststrribubub tititiononnn C C C ClalassssOcOcOcOctt.t 19-2323222 DiDiDisttsts riribubutititiononon CC C lalalassssssOct. 26-30000 TrTrTranaa smsmmissisi sisionon CC Clalalasssssss
November: Nov. 2-6 Transmissssioion n ClClC asasssssssNoNoNoN v.vv 9999-111-12 222 MMM Mececchhahaninicscs C Clalassss
Comprehensive Operator Qualification Training at its BestComprehensive Operator Qualification Training at its Best
HANDS-ON IN-DEPTH and
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom, hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily and efficiently.
Please wear casual clothes and steel-toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc. The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at 918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc. Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:
E-mail:
LineMaster Training T.D. Williamson, Inc. 6801 S. 65th West Ave. Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766918-447-5000
918-446-6327
Pigging Technology
Distribution Equipment I
Distribution Equipment II
Transmission Equipment
T-101 Tapping Machine
660, 760 Tapping Machines
HT&P Job Planning
Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and ApplicationsThis class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught. Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ requirements. This two-day class begins at 9 a.m. the first day and ends at 2:30 p.m. on the second day. The fee is $650 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging for Low Pressure Distribution PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and concludes at noon on Friday. The fee is $950 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
Hot Tapping & Plugging for High Pressure Transmission PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for T-101 Drilling Machines, 660 Tapping Machines and STOPPLE Plugging Machines is included. An operator quali-fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled days and ends at 5:00 p.m. on Friday. The fee is $1,150 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
T-101 Pipeline Drilling MachineThis special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-ing on the use and maintenance of this equipment. This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging Job Planning and Fitting SelectionThis class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-ments, sealing element selection and completion are included. A summary of TDW fitting design principles is included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Classes are available. Call Customer Training at (918) 447-5127.
Mechanic Maintenance Training for Hot Tapping & Plugging EquipmentThis class covers preventive maintenance, routine inspection and minor repairs for the T-101 Drilling Machine, T-203 and 660/760 Tapping Machines, SANDWICH Valves, SHORTSTOPP II, SHORTSTOPP 500 and STOPPPLE Plugging Machines. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries. TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-0109
Who Should Attend?
Transmission Equipment Class
Distribution Equipment Class
Pigging Technology
T-101 Equipment Class
Composite Material Wrap
Mechanics Class
LineMaster TrainingTMC l a s s I n f o r m a t i o n
HT & P Job Planning
Please bring steel toed shoes
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom, hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily and efficiently.
Please wear casual clothes and steel-toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc. The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at 918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc. Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:
E-mail:
LineMaster Training T.D. Williamson, Inc. 6801 S. 65th West Ave. Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766918-447-5000
918-446-6327
Pigging Technology
Distribution Equipment I
Distribution Equipment II
Transmission Equipment
T-101 Tapping Machine
660, 760 Tapping Machines
HT&P Job Planning
Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and ApplicationsThis class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught. Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ requirements. This two-day class begins at 9 a.m. the first day and ends at 2:30 p.m. on the second day. The fee is $650 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging for Low Pressure Distribution PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and concludes at noon on Friday. The fee is $950 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
Hot Tapping & Plugging for High Pressure Transmission PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for T-101 Drilling Machines, 660 Tapping Machines and STOPPLE Plugging Machines is included. An operator quali-fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled days and ends at 5:00 p.m. on Friday. The fee is $1,150 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
T-101 Pipeline Drilling MachineThis special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-ing on the use and maintenance of this equipment. This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging Job Planning and Fitting SelectionThis class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-ments, sealing element selection and completion are included. A summary of TDW fitting design principles is included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Classes are available. Call Customer Training at (918) 447-5127.
Mechanic Maintenance Training for Hot Tapping & Plugging EquipmentThis class covers preventive maintenance, routine inspection and minor repairs for the T-101 Drilling Machine, T-203 and 660/760 Tapping Machines, SANDWICH Valves, SHORTSTOPP II, SHORTSTOPP 500 and STOPPPLE Plugging Machines. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries. TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-0109
Who Should Attend?
Transmission Equipment Class
Distribution Equipment Class
Pigging Technology
T-101 Equipment Class
Composite Material Wrap
Mechanics Class
LineMaster TrainingTMC l a s s I n f o r m a t i o n
HT & P Job Planning
Please bring steel toed shoes
TDW recommends that engineers, operators, foremen, trainers and hands-on personnel participate in these classes.
LineMaster Training is held in TDWs state-of-the-art Technology Center in Tulsa, OK. A large classroom, hands-on training area and high-quality audiovisual equipment allow the latest training techniques to be taught easily and efficiently.
Please wear casual clothes and steel-toed shoes. Hard hats, eye protection and ear protection will be provided.
Each participant must cover any other expenses, such as hotel, meals, and transportation to and from Tulsa, etc. The preferred hotel, Best Western Tulsa Inn & Suites, offers a reduced rate of $72. The hotel can be reached at 918/858-2100 or 1-800-WESTERN and is located at 3212 S. 79th East Ave., Tulsa, OK 74145.
Make reservations as early as possible. To register, please fill out the information on the panel at the top of this page and fax, call, e-mail or mail to T.D. Williamson, Inc. at 6801 S. 65th W. Ave., Tulsa, OK. 74131.
Note: You may cancel your registration up to 10 business days prior to the training class scheduled date and TDW will refund your tuition less a $175 service charge.
To register, please fill out the information below and fax, call, e-mail or mail to T.D. Williamson, Inc.
Program:____________________________________________ Date:_________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Name:______________________________________________ Title: _________________________________________
Company Name: ____________________________________________________________________________________
Address: ___________________________________________________________________________________________
City: _______________________________________________ State:________ Zip Code: _______________________
Telephone: _________________________________________ Fax: __________________________________________
E-mail: _____________________________________________________________________________________________
Payment by card or by check. Check Method of payment:
MasterCard Visa Amx Expiration Date: _____________________ Card no: _____________________________
Signature: _______________________________________________________________________________________
Make checks payable to T.D. Williamson, Inc. Mail registration and payment to: Customer Training, T.D. Williamson, Inc.,
P. O. Box 3409 Tulsa, OK 74101-3409
You may cancel your registration up to 10 business days prior to the training class scheduled date and we will refund your tuition less a $175 service charge
C u s t o m e r T r a i n i n g
Registration Form
Fax Number:
USA Toll Free:
Phone:
E-mail:
LineMaster Training T.D. Williamson, Inc. 6801 S. 65th West Ave. Tulsa, OK 74131-2444
www.tdwilliamson.com
888-839-6766918-447-5000
918-446-6327
Pigging Technology Distribution Equipment I Distribution Equipment II Transmission Equipment T-101 Tapping Machine 660, 760 Tapping Machines HT&P Job Planning Mechanics
Which class are you attending?
Name on card:
Pipeline Pigging Concepts and ApplicationsThis class covers why pigging is necessary and which pigs should be used. In addition, pipeline design for pigging will be taught, including launcher and receiver design. Pig launching, receiving, tracking and locating will be taught. Participants also learn about internal pipeline inspection with smart pigs. Observation of pigging processes will be held on TDWs exclusive test pipeline. An operator qualification test and an observation checklist are used for OQ requirements. This two-day class begins at 9 a.m. the first day and ends at 2:30 p.m. on the second day. The fee is $650 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging for Low Pressure Distribution PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Training is conducted on the T-101 Drilling Machine, T-203 Tapping Machine and 660 Tapping Machine, as well as SHORTSTOPP 60, SHORTSTOPP II and SHORTSTOPP 500 Plugging Machines. An operator qualification test and an observation checklist are used for OQ requirements. This class starts at 8 a.m. on scheduled day and concludes at noon on Friday. The fee is $950 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
Hot Tapping & Plugging for High Pressure Transmission PipelinesHot tapping and plugging operating instructions, applications and maintenance are covered. Equipment training for T-101 Drilling Machines, 660 Tapping Machines and STOPPLE Plugging Machines is included. An operator quali-fication test and an observation checklist are used for OQ requirements. This class that begins at 8 a.m. on scheduled days and ends at 5:00 p.m. on Friday. The fee is $1,150 for each student. Operator Qualification testing and observations are available for an additional charge of $160. Students wanting OQ evaluations will stay through Friday. NOTE: Inexperienced students cannot be expected to pass an Operator Qualification Evaluation following this class.
T-101 Pipeline Drilling MachineThis special two-day class is devoted to the popular T-101 Drilling Machine. Participants will receive in-depth train-ing on the use and maintenance of this equipment. This class begins at 8 a.m. on scheduled day and the following day and ends at 5 p.m. The fee is $600 for each student. Operator Qualification testing and observations are available for an additional charge of $160.
Hot Tapping & Plugging Job Planning and Fitting SelectionThis class is a complete how to for planning a Hot Tapping and Plugging job. Fitting selection, equipment require-ments, sealing element selection and completion are included. A summary of TDW fitting design principles is included. This two-day class meets from 8 a.m. to 5 p.m. each day. The fee is $650 for each student.
Classes are available. Call Customer Training at (918) 447-5127.
Mechanic Maintenance Training for Hot Tapping & Plugging EquipmentThis class covers preventive maintenance, routine inspection and minor repairs for the T-101 Drilling Machine, T-203 and 660/760 Tapping Machines, SANDWICH Valves, SHORTSTOPP II, SHORTSTOPP 500 and STOPPPLE Plugging Machines. Classes run from 8 a.m. until 5 p.m. each day. The fee is $950 for each student.
Where Do I Go?
Health & Safety?
All the Facts
Registration
The Standard For Operator Training Registered trademarks of T.D. Williamson, Inc. in the United States and in foreign countries. TM Trademarks of T.D. Williamson, Inc. in the United States and in foreign countries.
TM
LineMaster
Pub:10-231-0109
Who Should Attend?
Transmission Equipment Class
Distribution Equipment Class
Pigging Technology
T-101 Equipment Class
Composite Material Wrap
Mechanics Class
LineMaster TrainingTMC l a s s I n f o r m a t i o n
HT & P Job Planning
Please bring steel toed shoes
CoverClass ScheduleClass InformationRegistration FormAdditional InformationDistribution Systems CatalogHigh Pressure CatalogPigging Products CatalogOffshore Service Catalog
Top Related