How to perform a
DEGREE EVALUATIONDEGREE EVALUATION
Go to uwyo.edu
Select WyoWeb
Log in to WyoWeb
Select the Student Resources tab
Select Degree Evaluation under Registration Tools
Select the semester you are currently enrolled in
Select Detail Requirements
Select Submit
View your remaining requirements
For more instructions including photos, continue to the next slide.
If you are viewing Destination YOU-W, shown below, please click this arrow to continue.
Otherwise, continue to the next slide.
College Requirements
Department Requirements
University Requirements
First section of degree evaluation
Second section of degree evaluation
Third section of degree evaluation
Program Enrolled in. **Double check that your
degree evaluation lists the major you have declared.**
Area: Designates a requirement.
Met: Indicates
whether or not the
requirement has been met.
Specific actions to take to complete the general
requirement.
Indicates that both actions must be taken to complete the requirement. You may see an “or” option for other
requirements.
General USP RequirementTo meet this requirement you must fulfill the QA and QB requirement.
Specific Math and Quant USP Requirements of
QA and QB
MetConditio
n
Subjects needed to complete
the requiremen
t
Specific Course
numbers needed to
complete the requirement
If the requirement has been met, you will see the word YES under the MET heading and next to the
course/requirement. You will then see the course that met the requirement on the right side of
your evaluation.
If the requirement hasn’t been met, you will see the
word NO under the MET heading and next to the
course/requirement. You will then see the course needed
to fulfill the requirement listed on the left side of your
evaluation.
Some majors will have a GPA requirement. When the degree evaluation
calculates your GPA, it will most often include your transfer GPA. The GPA
needed for graduation or to meet specific requirement is a UW only GPA and
cannot include your Transfer GPA. Please calculate your GPA based only on
courses you took through the University of Wyoming.
UW GPA: Calculate using only courses taken through the
University of Wyoming.
If you transfer in 16 credit hours, post high school, you may take the TIP exam, score a 70%, and then petition to have this USP requirement met.
For information about the TIP exam visit: www.uwyo.edu/unst/student-advising-information/transfer-information/satisfying-
the-l/
If you transfer in 16 credit hours, post high school, this requirement will be met.
Information on the Intellectual Community (I) USP can be found at: www.uwyo.edu/unst/usp-2003/i-requirement/index.html
One course may satisfy more than one requirement.o Ie: ME 3360 is an upper division course that will fulfill a major requirement
for the Mechanical Engineering Major, as well as, count for credit hours to be applied towards the requirement of 48.0 upper division credit hours.
When you have the option to complete an Upper or Lower division course, try to take the upper division course to fulfill the requirement of 48.0 upper division credit hours.
A UW GPA of 2.0 is required for graduation. Take note, the college you are obtaining your degree through may have a different GPA requirement.
Double check to make sure all classes you have taken at both your previous institution and the University of Wyoming are listed on your Degree Evaluation.
What if you want to consider a change of major?
What-If Analysis helps you explore alternate majors using a degree evaluation to view the requirements remaining to complete a degree in the new major.
What-If Analysis also helps you to view how the courses you have already completed may meet the requirements of a different major.
While viewing the degree evaluation for your current major, scroll to the bottom of the page and select the What-If Analysis Hyperlink.
Select the year you transferred to or began taking courses at the
University of Wyoming. Then, select continue.
Locate the program you are considering. Then,
select continue.
Select Submit.
Select the campus you will be attending.
Select the major you are
considering.
Select the term when your new
program/major would begin.
Select Generate Request.
Select Detail Requirements, then Submit.
A new degree evaluation will be generated, which will include the requirements to be met in order to obtain a degree in your change of major.
Before changing your major, contact your advisor or the Center for Advising and Career Services to discuss the options for changing a major.
Center for Advising and Career ServicesKnight Hall, Room 222
Phone: (307) 766-2398www.uwyo.edu/cacs/
Contact your Program Advisor
Office of the RegistrarKnight Hall, West WingDepartment 3964
(307)766-5272Email: [email protected]
Transfer Support ServicesKnight Hall, Room 202
(307) 766-2398Email: [email protected]
After logging in, select Register for Classes from the
checklist.
Select Return to Menu on the Registration Term page
Select Return to Menu on the Registration page
Select Student Records.
Select Degree Evaluation under Registration Tools
Select Detail Requirements
Select Submit
View your remaining requirements
For more instructions including photos, continue to the next slide.
College Requirements
Department Requirements
University Requirements
First section of degree evaluation
Second section of degree evaluation
Third section of degree evaluation
Program Enrolled in. **Double check that your
degree evaluation lists the major you have declared.**
Area: Designates a requirement.
Met: Indicates
whether or not the
requirement has been met.
Specific actions to take to complete the general
requirement.
Indicates that both actions must be taken to complete the requirement. You may see an “or” option for other
requirements.
General USP RequirementTo meet this requirement you must fulfill the QA and QB requirement.
Specific Math and Quant USP Requirements of
QA and QB
MetConditio
n
Subjects needed to complete
the requiremen
t
Specific Course
numbers needed to
complete the requirement
If the requirement has been met, you will see the word YES under the MET heading and next to the
course/requirement. You will then see the course that met the requirement on the right side of
your evaluation.
If the requirement hasn’t been met, you will see the
word NO under the MET heading and next to the
course/requirement. You will then see the course needed
to fulfill the requirement listed on the left side of your
evaluation.
Some majors will have a GPA requirement. When the degree evaluation
calculates your GPA, it will most often include your transfer GPA. The GPA
needed for graduation or to meet specific requirement is a UW only GPA and
cannot include your Transfer GPA. Please calculate your GPA based only on
courses you took through the University of Wyoming.
UW GPA: Calculate using only courses taken through the
University of Wyoming.
If you transfer in 16 credit hours, post high school, you may take the TIP exam, score a 70%, and then petition to have this USP requirement met.
For information about the TIP exam visit: www.uwyo.edu/unst/student-advising-information/transfer-information/satisfying-
the-l/
If you transfer in 16 credit hours, post high school, this requirement will be met.
Information on the Intellectual Community (I) USP can be found at: www.uwyo.edu/unst/usp-2003/i-requirement/index.html
One course may satisfy more than one requirement.o Ie: ME 3360 is an upper division course that will fulfill a major requirement
for the Mechanical Engineering Major, as well as, count for credit hours to be applied towards the requirement of 48.0 upper division credit hours.
When you have the option to complete an Upper or Lower division course, try to take the upper division course to fulfill the requirement of 48.0 upper division credit hours.
A UW GPA of 2.0 is required for graduation. Take note, the college you are obtaining your degree through may have a different GPA requirement.
Double check to make sure all classes you have taken at both your previous institution and the University of Wyoming are listed on your Degree Evaluation.
What if you want to consider a change of major?
What-If Analysis helps you explore alternate majors using a degree evaluation to view the requirements remaining to complete a degree in the new major.
What-If Analysis also helps you to view how the courses you have already completed may meet the requirements of a different major.
While viewing the degree evaluation for your current major, scroll to the bottom of the page and select the What-If Analysis Hyperlink.
Select the year you transferred to or began taking courses at the
University of Wyoming. Then, select continue.
Locate the program you are considering. Then,
select continue.
Select Submit.
Select the campus you will be attending.
Select the major you are
considering.
Select the term when your new
program/major would begin.
Select Generate Request.
Select Detail Requirements, then Submit.
A new degree evaluation will be generated, which will include the requirements to be met in order to obtain a degree in your change of major.
Before changing your major, contact your advisor or the Center for Advising and Career Services to discuss the options for changing a major.
Center for Advising and Career ServicesKnight Hall, Room 222
Phone: (307) 766-2398www.uwyo.edu/cacs/
Contact your Program Advisor
Office of the RegistrarKnight Hall, West WingDepartment 3964
(307)766-5272Email: [email protected]
Transfer Support ServicesKnight Hall, Room 202
(307) 766-2398Email: [email protected]