2011 Autodesk CI3865-Incredible AutoCAD Civil 3D Users: Prove
your Credibility with Civil 3D Certification, Part 2 Michelle
Rasmussen Training Manager at IMAGINiT Technologies
Slide 2
2011 Autodesk 2 Class Objectives In Part 1, you will: 1.
Discover Tips and Tricks to being successful as you sit to take
your exam 2. Learn about the types of questions asked during the
exam on the following: User Interface Styles Lines & Curves
Points Surfaces In Part 2, you will 1. Learn about the types of
questions asked during the exam on the following: Parcels
Alignments Profiles & Profile Views Corridors Sections &
Section Views Pipe Networks Grading Managing & Sharing Data
Plan Production Survey Tools
Slide 3
2011 Autodesk Parcels
Slide 4
2011 Autodesk Parcels
Slide 5
2011 Autodesk Alignments
Slide 6
2011 Autodesk Alignments Make sure you know Curves and Reverse
Curves
2011 Autodesk Sections & Section Views Check for Corridor
Surfaces Run Sample Lines Define the Correct Materials
Slide 13
2011 Autodesk Pipe Networks
Slide 14
2011 Autodesk Pipe Networks Set Rules Check the Slope Direction
Then Set Pipes/Structures
Slide 15
2011 Autodesk Grading
Slide 16
2011 Autodesk Grading Sites Feature Lines
Slide 17
2011 Autodesk Managing and Sharing Data
Slide 18
2011 Autodesk Managing and Sharing Data Create a Project
Associate the Drawings Create Data Shortcuts Create Reference
Slide 19
2011 Autodesk Plan Production
Slide 20
2011 Autodesk Plan Production Read the Question Carefully! Use
the Correct Template Set the Correct Settings
Slide 21
2011 Autodesk Survey
Slide 22
2011 Autodesk Survey Use Figures to your advantage
Slide 23
2011 Autodesk Class Summary Getting certified on Civil 3D can
help accelerate your professional development, improve
productivity, and enhance your credibility. This two-part seminar
will walk you through preparing for the exam.
Slide 24
2011 Autodesk 24 Class Summary In Part 1, you will: 1. Discover
Tips and Tricks to being successful as you sit to take your exam 2.
Learn about the types of questions asked during the exam on the
following: User Interface Styles Lines & Curves Points Surfaces
In Part 2, you will 1. Learn about the types of questions asked
during the exam on the following: Parcels Alignments Profiles &
Profile Views Corridors Sections & Section Views Pipe Networks
Grading Managing & Sharing Data Plan Production Survey
Tools
Slide 25
2011 Autodesk Thank You I hope you enjoyed todays session and
would love to hear about your experiences with the exam. Send your
success stories or questions to: [email protected]