ZXSDR B8200 GU360 (V4.00.100) Indoor GSM&UMTS Dual Mode Baseband Unit Ground Parameter Reference
-
Upload
musyoka-jackson-musyoka -
Category
Documents
-
view
726 -
download
18
Transcript of ZXSDR B8200 GU360 (V4.00.100) Indoor GSM&UMTS Dual Mode Baseband Unit Ground Parameter Reference
ZXSDR B8200 GU360Indoor GSM&UMTS Dual Mode
Baseband UnitGround Parameter Reference
Version 4.00.100
ZTE CORPORATIONZTE Plaza, Keji Road South,Hi-Tech Industrial Park,Nanshan District, Shenzhen,P. R. China518057Tel: (86) 755 26771900Fax: (86) 755 26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]
LEGAL INFORMATION
Copyright © 2006 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution ofthis document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPO-RATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATIONor of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are dis-claimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-in-fringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on theinformation contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subjectmatter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No. Revision Date Revision Reason
1.0 20090105 First Edition (B8200 GU360 V4.00.100b2 + OMMBV4.00.100d2)
Serial Number: 20085384
Contents
Preface............................................................... i
General Configuration Parameters ....................1Base Station .................................................................. 1
BS Equipment Resource Management................................ 4
Rack ............................................................................. 6
Rack Topo...................................................................... 7
Antenna ........................................................................ 9
RF Connection...............................................................10
Tower Top Amplifier .......................................................11
Environment Supervision ................................................13
Clock Source PRI ...........................................................14
Serial Port Information ...................................................15
AISG Device .................................................................16
Dry Contact ..................................................................17
Transmission Configuration Parameters..........19Physical Layer Management ............................................19
E1/T1 Link................................................................19
HDLC Link ................................................................20
Time Slot Interchange................................................22
Global Port Layer Management ........................................23
Ethernet...................................................................23
QoS Bandwidth .........................................................25
PPP Link ...................................................................26
Global Port ...............................................................30
IP/Static Router Layer Management .................................31
IP Parameter.............................................................31
Static Router.............................................................33
Transmission Layer Management .....................................34
SCTP Association .......................................................34
SCTP Stream ............................................................37
OMC-B Link ..............................................................38
Clock Configuration........................................................39
IP Clock ...................................................................39
Figures ............................................................41
Tables .............................................................43
List of Glossary................................................45
Preface
Purpose ZXWR OMM is the operation and maintenance module of ZTEWCDMA product series. Configuration management, fault man-agement, topology management, performance management andsecurity management can be performed via OMM.
This manual is a parameter reference for BS ground resource man-agement.
What is in ThisManual
TABLE 1 CHAPTER SUMMARY
Chapter Summary
Chapter 1 General ConfigurationParameters
Introduces general configurationparameters of ground resourcemanagement.
Chapter 2 TransmissionConfiguration Parameters
Introduces transmissionconfiguration parameters ofground resource management.
IntendedAudience
� Maintenance engineer
� NM engineer
Confidential and Proprietary Information of ZTE CORPORATION i
ZXSDR B8200 GU360 Ground Parameter Reference
This page is intentionally blank.
ii Confidential and Proprietary Information of ZTE CORPORATION
C h a p t e r 1
General ConfigurationParameters
Table of ContentsBase Station ...................................................................... 1BS Equipment Resource Management.................................... 4Rack ................................................................................. 6Rack Topo.......................................................................... 7Antenna ............................................................................ 9RF Connection...................................................................10Tower Top Amplifier ...........................................................11Environment Supervision....................................................13Clock Source PRI ...............................................................14Serial Port Information .......................................................15AISG Device .....................................................................16Dry Contact ......................................................................17
Base StationInterface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 1
ZXSDR B8200 GU360 Ground Parameter Reference
2 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Managed Element IDID of BS managed el-ement, for OMM use [0, 65535] -
Managed ElementType BS Type {ZTE series BS type} -
Managed Element IPAddress
IP address for BS op-eration and mainte-nance - -
Vendor Name BS manufacturer 40 characters at most -
User Defined State Reserved field - -
Confidential and Proprietary Information of ZTE CORPORATION 3
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
LocationDescription of BS in-stallation location 40 characters at most -
Software VersionBS Software VersionNo. {Software Version} -
LongitudeLongitude of BS loca-tion
[-180.00000,180.00000] -
Latitude Latitude of BS location[-90.00000,90.00000] -
Maintain StatusWhether ME is in serv-ice state {Normal, Testing}
OMM does not reportto upper-level NM sys-tem the alarm causedby BS testing status.
BS Equipment ResourceManagement
Interface The related interface is shown in the figure below.
4 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Base Station ID [0, 65535] Inter-Operabilityparameter,consistent with RNCconfiguration
Base Station No
Base StationDescription
BS Description 200 characters atmost
-
Base Station Type BS Type - Parameter valueautomatically set bythe system
Confidential and Proprietary Information of ZTE CORPORATION 5
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
GSM No GSM No when GSMmode of the BS issupported
[0, 65535] –
Clock SyncPeriod(Hours)
SNTP clocksynchronizationperiod for the BS
[0, 48] -
Medium Type of IUBLine
Transmission mediumat Iub/Abis interface
{E1, T1, FE, Sat, GE} –
NTP Server IP Address Time server IPaddress
- -
Time Zone The time zone whereOMC-B is located
Refer to softwarepull-down list
-
Support Power-offControl
Whether power-offcontrol is supported
{Supported, NotSupported}
If the parameteris configured as“supported”, systemwill adjust theoperation of BS boardin order to savepower.
Power Work Model Working mode of thetwo power supplies
{Master And SlaveModel, BurthenPartake Model}
The current versiononly supports “MasterAnd Slave Model”.
Network Switch Model Network switch modelwhen two FS boardsare configured.
{Master And SlaveModel, BurthenPartake Model}
–
Transmission Type Transmission type atIub/Abis interface
{Full IP} -
Radio Mode Radio mode used bythe dual-mode BS
{GSM, WCDMA,GSM/WCDMA}
–
Support SummerTime
Whether summertime is supported
{Supported, NotSupported}
If the parameteris configured as“supported”, Startingand ending summertime should beconfigured.
RackInterface The related interface is shown in the figure below.
6 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined namefor the current MO(managed object).
40 characters at most -
Rack No. Rack No. [1, 25] Main rack No. is 1.RU/RRU rack No. is2~25.
Rack Type Rack type {Rack type} -
Rack Name User-Defined rackname
200 characters atmost
-
Phone Number Phone number - -
Rack TopoInterface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 7
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined Name 40 characters at most -
Rack No. Rack No. ofupper-level NE inthe case of cascadenetworking
{The rack that can becascaded}
Shelf No. Shelf No. ofupper-level boardin the case of cascadenetworking
{The rack that can becascaded}
Slot No. Slot No. ofupper-level boardin the case of cascadenetworking
{The rack that can becascaded}
Port ID Port ID of upper-levelboard in the case ofcascade networking
Depending on boardtype
Cascading interface A
8 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Description Value Range Remarks
Child Rack No. Rack No. oflower-level NE inthe case of cascadenetworking
{The rack that can becascaded}
Child Shelf No. Shelf No. oflower-level boardin the case of cascadenetworking
{The rack that can becascaded}
Child Slot No. Slot No. of lower-levelboard in the case ofcascade networking
{The rack that can becascaded}
Child Port ID Port ID of lower-levelboard in the case ofcascade networking
Depending on thetype of lower-levelBS/RRU
Cascading interface B
RRU Connection Mode RRU networking mode Depending onthe networkingmode supported byRRU/BBU
-
AntennaInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Confidential and Proprietary Information of ZTE CORPORATION 9
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
Rack No. No. of the rack thatcan be configuredwith antenna
{The rack that hasbeen created and canbe configured withantenna}
-
Slot No. Antenna ID Depending on themaximum number ofantennas per rack
-
Antenna Type Antenna type {ANT, RET} ANT-Ordinaryantenna; RET-Remoteelectrical tilt antenna
RF ConnectionInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
10 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Description Value Range Remarks
User Label Self-Defind Name 40 characters at most -
RF Connection ID ID of RF connection [0, 254] -
Transceiving Flag Whether the RFconnection is transmitconnection or receiveconnection
{Uplink (Receive),Downlink (Transmit)}
-
RF Connection Type Type of RF connection Depending on BS typeand the correspondingboard type
-
Rack No. No. of the rack wherethe RF unit usedby the current RFconnection is located
- -
board (rack, shelf,slot)
ID of the RF unit(board) used by thecurrent RF connection
- -
In/Out Port ID Port ID of the RF unitused by RF connection
- In Port ID isconfigured foruplink; Out PortID is configured fordownlink.
Tower Top AmplifierInterface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 11
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range
User Label Self-defined name 40 characters at most
Rack No./ shelf No./Tower TopAmplifier ID
Rack No./ shelf No./AntennaID of the antenna thatis connected with toweramplifier
{ID of the created antenna}
Type Type of tower top amplifier {TMA, TMB30, TMB40, ATMA,ACOM}
TMA[110, 130] x (0.1dB)
TMB30/40 [120, 240] x(0.1dB)
ATMA[44, 52] x (0.25dB)
Uplink Power Gain Uplink power gain
ACOM[0, 14] x (0.5dB)
Downlink Power Gain Downlink power gain TMB30/40[70, 170] x (0.1dB)
12 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Description Value Range
Tower Top Amplifier NoiseCoefficient
Noise coefficient [10, 30] x (0.1 dB)
Tower Top Amplifier FeederCable Loss
Feeder loss [0, 80] x (0.1 dB)
Minimum Power SupplyCurrent
Under-Current alarmthreshold
[0, 70]
Work Current Alarm UpperLimit
Upper limit of work currentalarm
[135, 160]
Work Current Alarm LowerLimit
Lower limit of work currentalarm
[70, 85]
Environment SupervisionInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Confidential and Proprietary Information of ZTE CORPORATION 13
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range
User Label Self-defined name 40 characters at most
Rack No.
Shelf No.
Slot No.
Location of the SA board Rack No./Shelf No./Slot No.where SA board is located
Environment MonitoringThreshold Type
Environment supervision type {External Temperature, VSWRAlarm Threshold}
Upper Limit Alarm upper limit Depending on environmentsupervision type
Lower Limit Alarm lower limit Depending on environmentsupervision type
Clock Source PRIInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
14 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Description Value Range Remarks
External Clock SourceID
Type of external clocksource
Depending onthe clock sourcesupported by BS
-
Priority Priority of clocksource
Depending on thenumber of clocksources supported byBS
Parameter value andpriority level areinversely correlated.(The lower thevalue is, the higherthe priority levelbecomes.)
Serial Port InformationInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Confidential and Proprietary Information of ZTE CORPORATION 15
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
Rack No./ShelfNo./Slot No.
Location of the boardwith the current serialport
Depending on BS type -
Serial Port No. Serial port No. Depending on typeof the board whichsupports serial port(The number ofserial ports supportedby different boardsvaries.)
-
Baud Rate Transmission baudrate at serial Port
{4800, 9600, 19200,38400, 57600,115200}
Consistent withserial port deviceconfiguration
AISG DeviceInterface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
16 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 General Configuration Parameters
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Device ID Serial number of AISGdevice
32 characters at most The first twocharacters representmanufacturer ID.
Device Type AISG device type {RET, ATMA, ACOM} -
Rack No./Shelf No. The rack/ shelf whereAISG device is located
- -
Slot No. The slot where AISGdevice is located
- For remote electricaltilt antenna, theparameter representsantenna ID; for toweramplifier, it is the IDof tower amplifier; foractive combiner, it isACOM channel ID.
AISG Version No. AISG protocol versionNo.
{1.1, 2.0} Only two AISGprotocol versionsexist currently.
CCU Rack No./ CCUShelf No./CCU SlotNo.
Location of AISG CCU(control and clockunit) at BS device
Depending on BSdevice type
-
Dry ContactInterface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 17
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Rack No./ShelfNo./Slot No.
Location of the boardwhere dry contactsignal is inputted
- -
Dry Contact No. Dry contact port ID Depending on BS type -
Alarm Mode Setting the statusunder which thealarm is activated
{Closed, Open} When the initial stateof dry contact isopen circuit, closedcircuit produces alarmand the parameteris configured as“Closed”.
When the initial stateof dry contact isclosed circuit, opencircuit produces alarmand the parameter isconfigured as “Open”.
Alarm Content No. Alarm contentproduced afterreception of drycontact signal
{TMB downlinkbypass alarm, TMBuplink bypass alarm,Master power supplyfault, Immersionalarm, Smog alarm,Storage batteryalarm, Master powersupply over voltagealarm, master powersupply lack voltagealarm, Master powersupply broken alarm,Equipment of IndoorSurge ProtectionDevice alarm, TurnoffEquipment of IndoorSurge ProtectionDevice alarm,Shelf Indoor SurgeProtection Devicealarm, Outdoor SurgeProtection Devicealarm}
-
18 Confidential and Proprietary Information of ZTE CORPORATION
C h a p t e r 2
TransmissionConfigurationParameters
Table of ContentsPhysical Layer Management ................................................19Global Port Layer Management ............................................23IP/Static Router Layer Management .....................................31Transmission Layer Management .........................................34Clock Configuration............................................................39
Physical Layer ManagementE1/T1 Link
Interface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 19
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range
User Label Self-defined name 40 characters at most
Rack No./Shelf No./SlotNo./E1/T1 Link ID
Location which the E1/T1 linkis connected with (rack/ shelf/slot/port)
-
Link Type Far-End equipment whichE1/T1 link is connected to
{RNC, BSC, ALL}
HDLC Link
Interface The related interface is shown in the figure below.
20 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Parameter description is shown in the table below.
Parameter Description Value Range
User Label Self-Defined Name 40 characters at most
Rack No./Shelf No./SlotNo/HDLC ID/Bearer Link Type
The type of link which bearsHDLC and the link location
-
HDLC Link ID HDLC link ID [0, 31]
Row No./Timeslot Map The E1/T1 time slot used byHDLC link
-
Confidential and Proprietary Information of ZTE CORPORATION 21
ZXSDR B8200 GU360 Ground Parameter Reference
Time Slot Interchange
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Rack No./ShelfNo./Slot No.
Location of theinterface board wheretime slot interchangeis performed
- -
22 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Description Value Range Remarks
In E1/T1 Link ID ID of in E1/T1 link Depending on thenumber of E1/T1 lineson interface board
-
Out E1/T1 Link ID ID of out E1/T1 link Depending on thenumber of E1/T1 lineson interface board
-
Row No./In TimeslotMap/Out TimeslotMap
To select the timeslot used in time slotinterchange
- To configure time slotto be used as “in use”
The number of in timeslots and that of outtime slots should bethe same.
Global Port LayerManagementEthernet
Interface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 23
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-defined name 40 characters at most -
Rack No./ShelfNo./Slot No./PortID
Location which theEthernet link isconnected with(rack/shelf/boardslot/port)
- -
Working Mode Ethernet workingmode
{10Mbps half-duplex,100Mbps full-duplex,Self-Adaptive,10Mbps full-duplex,100Mbps half-duplex,1000Mbps}
Inter-Operabilityparameter, consistentwith far-endequipment
Link Object Ethernet link object {IPbone, BTS} –
Bandwidth Link bandwidth [0, 100000] -
24 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
QoS Bandwidth
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Rack No./ShelfNo./Slot No./PortID
Location which theEthernet link isconnected with(rack/shelf/boardslot/port)
- -
Traffic Quality Priority Traffic quality priority [0, 255] –
Bandwidth of QoS Link bandwidth in thecase of fixed priority
– The total bandwidthfor all priorities cannotexceed the configuredEthernet bandwidth.
Confidential and Proprietary Information of ZTE CORPORATION 25
ZXSDR B8200 GU360 Ground Parameter Reference
PPP Link
Interface The related interface is shown in the figure below.
26 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Confidential and Proprietary Information of ZTE CORPORATION 27
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
[Basic Information]
User Label Self-Defined name 40 characters at most -
Rack No./ShelfNo./Slot No.
Location of the linkwhich bears Point-to-Point Protocol(rack/shelf/board)
- -
Link Type The bottom-layerprotocol used by PPPlink
{HDLC} -
28 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Description Value Range Remarks
Bearer Protocol Protocol type for PPPlink
{PPP, ML-PPP} –
Base Station IP Local IP Address ofPPP link
- IP address is obtainedautomatically ifparameter value is“0.0.0.0”.
Quality Protocol Service qualityprotocol
{LQR, Unsupported} -
This parameter isconfigurable onlywhen data link layerprotocol is HDLC.
HDLC No. The HDLC link whichbears PPP protocol
-
One HDLC link canbe selected whenbearer protocol is“PPP”; multiple HDLClinks may be selectedwhen bearer protocolis “ML-PPP”.
[Authentication Information]
Authentication Whether to performauthentication
{Authenticationdisabled,AuthenticationEnabled}
-
Authentication UserName
Authentication username during linkestablishment
- -
AuthenticationPassword
Authenticationpassword during linkestablishment
- -
[IP Information]
IP Compression Whether IPcompression issupported
{CompressionDisabled,CompressionEnabled}
-
Maximum PeriodBetween Full Headers
Maximum intervalpackets between fullheaders
[1, 65535] -
Maximum TimeBetween Full Headers
Maximum intervalperiod between fullheaders
[1, 255] -
Maximum TCPCompression ID
Maximum TCPcompression ID
[3, 255] -
Maximum NONTCPCompression ID
Maximum NONTCPcompression ID
[3, 65535] -
Maximum Length ofHeader
Maximum length ofcompressible header
[60, 65535] -
Confidential and Proprietary Information of ZTE CORPORATION 29
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
Type of MP Head MP header sequenceformat
{Long, Short,InValid}
–
MP Priority MP priority Long: [1, 16]; Short:[1, 4]
–
Global Port
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined Name 40 characters at most -
Port Type Type of the link thatbears global port
{IP over Ethernet, IPover PPP}
–
30 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Description Value Range Remarks
Rack No./ShelfNo./Slot No/Port ID
Location of the linkthat bears global port(rack/shelf/board/port)
- -
VLAN ID Global port VLAN ID [2, 4094] If VLAN is unused,VLAN ID is “65535”.
IP/Static Router LayerManagementIP Parameter
Interface The related interface is shown in the figure below.
Confidential and Proprietary Information of ZTE CORPORATION 31
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Global Port Global port ID {The created globalport}
–
IP Address/Subnet-work Mask/Gateway
IP addressinformation of globalport
- -
Bandwidth Bandwidth at globalport
[0, 100000] -
Living time of IP Pack Living time of IPpacket
[0, 255] –
32 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Description Value Range Remarks
Maximum length oftraffic unit
MTU [0, 65535] Recommendedparameter value is“1450”.
Radio Mode Traffic type over IPlink
{WCDMA, GSM,WCDMA/GSM}
–
COS Flag COS type over IP link {1 for Support, 0 forNonsupport}
–
Static Router
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Confidential and Proprietary Information of ZTE CORPORATION 33
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
Static Router ID Static router ID [0, 127] -
Global Port The global port thatneeds routing
{The created globalport}
–
Target IP Address Target IP address Valid IP address –
Target Network Mask Target network mask – –
Next Hop Gateway Next hop gateway Valid IP address –
Transmission LayerManagementSCTP Association
Interface The related interface is shown in the figure below.
34 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Association ID Association ID [0, 1] The maximumnumber of configuredSCTP association linksis 2.
Rack No./ShelfNo./Slot No.
Location of the boardwhich bears SCTP link
- -
Radio Mode Traffic type over SCTPlink
{WCDMA, GSM} –
Confidential and Proprietary Information of ZTE CORPORATION 35
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
No.0 Local IP Address Local IP address ofSCTP link
Valid IP -
No.1 Local IP Address Local IP address ofSCTP link
Valid IP -
No.2 Local IP Address Local IP address ofSCTP link
Valid IP -
No.3 Local IP Address Local IP address ofSCTP link
Valid IP -
Local Port Number Local port No. ofSCTP link
[0, 65535] -
Remote Port Number Remote port No. ofSCTP link
[0, 65535] -
No.0 Remote IPAddress
Local IP address ofSCTP link (on RNCside)
Valid IP -
No.1 Remote IPAddress
Local IP address ofSCTP link (on RNCside)
Valid IP –
No.2 Remote IPAddress
Local IP address ofSCTP link (on RNCside)
Valid IP –
No.3 Remote IPAddress
Local IP address ofSCTP link (on RNCside)
Valid IP –
Number ofInput/Output Streams
Number of SCTPstreams
[1, 6] -
QoS IP link QoS {EF service, Servicegroup 4, discardPriority middle;Service group 2,discard Prioritymiddle; make thebest of; Service group4, discard Priorityhigh; Service group2, discard Priorityhigh}
-
Maximum Retry Times Maximum retry timesafter packet loss
[3, 5] -
Maximum IntervalTime
Maximum intervaltime for retry afterpacket loss
[1, 30] –
Heartthrob IntervalTime
Time interval forsending SCTP statusmonitor information
[1, 300] –
36 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
SCTP Stream
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Association ID The correspondingSCTP link instream parameterconfiguration
{The created SCTPlink}
–
Stream ID Stream ID [0, 5] –
User Type The user type thatSCTP stream bears
{NCP, CCP,NCP+CCP}
–
Confidential and Proprietary Information of ZTE CORPORATION 37
ZXSDR B8200 GU360 Ground Parameter Reference
OMC-B Link
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range
User Label Self-Defined name 40 characters at most
Rack No./Shelf No./Slot No. The interface board whichbears OMC-B connection
-
Link ID ID of OMC-B link [0, 1]
Base Station OMC IP Address IP address of the interfaceused to transmit BS operationand maintenance data packet
Configured IP address
38 Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Transmission Configuration Parameters
Parameter Description Value Range
Base Station OMC Gateway Destination gateway foroperation and maintenancedata sent by BS
Valid IP address
IP Tos QoS of IP link [0, 255]
Clock ConfigurationIP Clock
Interface The related interface is shown in the figure below.
Parameter Parameter description is shown in the table below.
Parameter Description Value Range Remarks
User Label Self-Defined name 40 characters at most -
Confidential and Proprietary Information of ZTE CORPORATION 39
ZXSDR B8200 GU360 Ground Parameter Reference
Parameter Description Value Range Remarks
Sync server IPAddress
IP address of clocksynchronizationserver
Valid IP -
Subnet Mask Subnet mask ofclock synchronizationserver
Subnet mask –
Gateway Address Gateway address ofclock synchronizationserver
Valid IP –
IP Address for BaseStation Clock
IP address for BSclock
{The created IP} -
IP Tos QoS of IP link {EF service, Servicegroup 4, discardpriority middle;Service group 2,discard prioritymiddle; make thebest of; Service group4, discard priorityhigh; Service group2, discard priorityhigh}
–
SYNC Interval Time Requested timeinterval for sendingSYNC (SYNC sent byremote end)
[1, 40] -
DELAY REQUESTInterval Time
Requested timeinterval for sendingDELAY REQUEST(DELAY REQUESTsent by remote end)
[30, 120] -
Sending Mode Sending mode {one step, two step} -
Durative SYNC Time Requested durativetime for sending SYNC(SYNC sent by remoteend)
[600, 3600] -
Durative DELAYREQUEST Time
Requested durativetime for sendingDELAY REQUEST(DELAY REQUESTsent by remote end)
[600, 3600] -
40 Confidential and Proprietary Information of ZTE CORPORATION
Figures
Confidential and Proprietary Information of ZTE CORPORATION 41
ZXSDR B8200 GU360 Ground Parameter Reference
This page is intentionally blank.
42 Confidential and Proprietary Information of ZTE CORPORATION
Tables
Confidential and Proprietary Information of ZTE CORPORATION 43
ZXSDR B8200 GU360 Ground Parameter Reference
This page is intentionally blank.
44 Confidential and Proprietary Information of ZTE CORPORATION
List of Glossary
AISG - Antenna Interface Standards Group
CCP - Communication Control Port
GSM - Global System for Mobile communication
HDLC - High-level Data Link Control
MTU - Maximum Transmission Unit
NCP - Node B Control Port
OMM - Operation & Maintenance Module
PPP - Point-to-Point Protocol
QoS - Quality of Service
RNC - Radio Network Controller
RRU - Remote Radio Unit
SA - Site Alarm Module
SCTP - Stream Control Transfer Protocol
VLAN - Virtual LAN
VSWR - Voltage Standing Wave Ratio
WCDMA - Wideband Code Division Multiple Access
Confidential and Proprietary Information of ZTE CORPORATION 45