Zublin
-
Upload
aria-atsez-co -
Category
Documents
-
view
214 -
download
1
description
Transcript of Zublin
![Page 1: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/1.jpg)
titel
Licht, Automatik und Sicherheit
PräsenzmelderBewegungsmelderSensorleuchten
InnovationBidirektional
2008 / 2009
LightAutomatic
and Security
Presence DetectorsMotion Detectors
Sensor Lights
Swiss Garde IR
![Page 2: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/2.jpg)
Important technical terms Page
– high-performance relay for electronic control gear 64
– Bidirectional 19/62
– Interactive 19/62
– Close-up detection area 56
– Internal detection area 57
– Bidi module 21
– Bidi pad 21
– Bidi set 21
– Bidi module + Bidi pad = Bidi set 21
Abbreviations
MD = Motion detector
SG = Swiss Garde
IG = Infra Garde
Internal detection area: 0–3mExternal detection area: 3–8m
Close-up area: 0–5mMedium area: 5–10mRemote area: 10–16m
The present 2008 catalogue has been specially desi-gned for electrical engineers, planners and electricians.
Along with detailed technical data, recommendationsand practical examples for the planning and installationare provided also. Out of more than 100 different pro-ducts that are divided into two price classes, you willfind the right device for any application with the aid ofthis catalogue.
Please consult our experts for your projects and benefitfrom our 20 years’ experience!
We look forward to receiving your ’feedback’, as yoursatisfaction is paramount to us.
Detection areas
In this catalogue:
Word novelty: Swiss Garde MZ5000 pp. 19–21+bidirectional, interactive pp. 62–63
Novelties: Swiss Garde presence detectors pp. 5– 8/15
Swiss Garde 3000 IR p. 13
Swiss Garde UP IR pp. 15–17
Swiss Garde 360 HF p. 22
www.zublin.de
3 year warranty !
Swiss Garde
Züblin Elektro GmbH
3 year warranty !
All Züblin products are CE certified / approved by the German Technical Inspection Agency and issued with a minimum 3 year warranty!
![Page 3: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/3.jpg)
Tarif
Table of contentswww.zublin.de
Swiss Garde 2–22
Survey 2–3
PIR hand-held transmitter 4
Presence detectors 5–8 / 15
Motion detectors 9–14 / 16–22
Infra Garde 23–32
Survey 23
Motion detectors 24–30
Z-radio 31
Camera motion detectors 32
Sensor lights and floodlights 33–54
Survey 34–35
HF sensor ceiling lights 36–39
Stainless steel sensor lights 40–44
Sensor lights 45–46 /49–50
Sensor post lights 41–43 / 46–48
Sensor floodlights 48 / 51–52
Floodlights and lights without sensor 53–54
1
Diagrams, installation examples,accessories 55–72
Swiss Garde 56–63
Miscellaneous 64–70
Accessories 67
Fax form 71
Page
![Page 4: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/4.jpg)
Swiss Garde Presence and Motion Detectors Survey
2 Operating instructions under www.zublin.de 3
Survey
Swiss Garde320 HF Concealed
Item no 2735
Presence detectors pp. 5–8Swiss Garde
MZ 5000 pp. 19–22BidirectionalHF / HF electronic equipmentfor signal processingSwiss Garde
Motion detectors pp. 9–12360°, ceiling installationSwiss Garde
Motion detectors pp. 13–14Wall installationSwiss Garde
Motion detectors pp. 17–18Wall installationSwiss Garde
1 2 3 4 5 6 7 89
SG 360 PremiumSG 360 Premium
SG 360
Plus KI
approx. 21 m
approx. 10 m
Installation examples Pulse GeneratorItem no 3390
Connection diagrams
Connection pp. 55–69diagrams Installation examplesAccessories
Swiss Garde300 D IR
Item no 25290Item no 25320
Swiss Garde180 IR Concealed
Item no 25280Item no 25320
Swiss Garde360 Presence AP
Item no 25080
Swiss Garde360 Presence Concealed
Item no 25070
Swiss Garde360 Presence KNX/EIB
Item no 25020
Swiss GardeMZ 5000
Item no 26350
Swiss GardeMZ 5000 kit
Item no 26350a
Swiss Garde360 HF
Item no 27370
HF Sensor 360 EB
Item no 2736
Swiss Garde3000 IR
Item no 26400Item no 25320
Swiss Garde3000 IR Concealed
Item no 26400Item no 25320
Swiss Garde290 IR
Item no 25250Item no 25320
L1N
NL
Wechselschalter Busch-Wächter® Leuchte
Motion detectors pp. 15–16Presence detectorsWall installation,concealed/concealed IRSwiss Garde
Connection diagrams pp. 56–70Installation examplesAccessories
Swiss Garde360 Presence Mini
Item no 25480
3 year warranty !
Swiss Garde
M. Züblin AG
3 year warranty !
P-IR hand-held transmitter optional Item no 25320PM remote control included
P-IR hand-held transmitter optional Item no 25320
P-IR hand-held transmitter optional Item no 25320P-IR hand-held transmitter optional Item no 25320
Swiss Garde360 WM
Item no 25100Item no 25320
Swiss Garde360 Premium Item no 25050Item no 25320
Swiss Garde 360 Premium concealed
Item no 25060Item no 25320
Swiss Garde360 Plus
Item no 25000Item no 25320
Swiss Garde360 Presence Easy
Item no 25470Item no 25320
Swiss Garde300 Presence Concealed
Item no 25210Item no 25320
![Page 5: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/5.jpg)
4 5
The hand-held transmitters
Description Item no Price in Euro
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Light offThe motion detector is switched off permanently.Reactivate with the ’AUTO’ button.
Holiday buttonIn holiday mode, the light is switched on every day at dawn for4 hours. Deactivate with the ’AUTO’ button.
LOCKPushbutton functions of the remote control are locked.Reactivation through pressing again.
RESETActivation of default values of the motion detector(Sens/Time/Lux: 3/10/10)
SENS The reach of the sensor can be set at 4 different values. The set value is illuminated on pressing the ’Play’ button.
TIME Different follow-up times and the short duration pulse functioncan be selected and read here. Illumination on pressing the’Play’ button.
LUX 4 different lux values can be set and read here.
Mini hand-held transmitterNominal voltage: DC 3 VBattery: CR 2025IR reach: approx. 6 mDimensions: 30 mm x 45 mm x 10 mmNote: The end user can switch the light on and off with
the mini hand-held transmitter.
Wand fixiert.AUTO: Sensor functionON: Light ON for 6 hours *OFF: Light OFF for 6 hours *
* after that back to the sensor function
SENDSending and storage of all set parameters in the motion detector (Sens, Time, Lux).
CURSORChoice of different parameters.
O.K Sending and storage of all set parameters in the motion detector (Sens, Time, Lux).
PLAYDisplay and check of the set parameters on the hand-held transmitter.
ON/OFFLight on or off for 6 hours each time. After that automatic backspacing to the ’Auto’ function.
AUTOAutomatic function as per settings of the motion detector.
TESTTesting of the motion detector independently of the ambient light value.
Impuls PauseWith the pulse pause button you select the pause time between 2 pulses: 20 secs or 60 secs for optimum activation of a time relay or machine.
Hand-held transmitter Swiss Garde
The Swiss Garde 360 Presence Model
Description Item no Price Euro
Swiss Garde 360 Presence concealed white 25070 125.00
Swiss Garde 360 Presence exposed white 25080 130.00
PM remote control 25090 20.00
Exposed frame 25440 15.00
Safety guard 3331 15.00
Presence detector Swiss Garde
Mounting height Sitting persons Ø Walking persons ØDiameter Diameter
2.0 m 5 m 12 m2.5 m 6 m 14 m3.0 m 7 m 16 m3.5 m 8 m ** 18 m4.0 m 9 m ** 20 m5.0 m
** Bei grösserem Erfassungsbereich muss der Zeitregler auf Maximum gestellt werden!
Your advantages
• Presence detector with large 16 m detection area• 2 independent relays for lighting and heating /
ventilation / air conditioning• Integrated short duration pulse function for the activation
of staircase switches, gongs, PLC, etc.• Remote controllable via IR remote control ON/OFF/AUTO
as well as lux value memory and operational mode• Additional pushbutton input for manual switching• Programmable as fully automatic or semiautomatic machine• Ideal for offices, schoolhouses, meeting rooms, etc.• Advantageous connecting and assembly system for quick
and easy installation• New high-performance relay with high electronic control
gear switching capacity
Concealed version With exposed frame
PIR hand-held transmitterNominal voltage: DC 3 VBattery: CR 2025IR reach: approx. 6 mDimensions: 55 mm x 85 mm x 10 mmNote: In case of manual setting of the motion detector all
parameters set via hand-held transmitter will be deleted.
Your advantages
• Setting of all LUX/SENS/time parameters manually or via PIR hand-held transmitter
• ‘Send’ key for transmission of all parameter values at the push of a button
• Buttons with optical and acoustic confirmation
• Cursor keys for simple setting of desired values
• Memory function for all set parameters
Programmable as semiautomatic
or fully automatic machine
Swiss Garde 360 PresenceFor the detection of small movements in offices and lounges
Nominal voltage: 230 Volt /50 HzDetection area: 360° / 16 mSwitching capacity relay 1: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x 18W, 25 x 36W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) maxRelays 2: potential-free max 5 A 230V/AC–30V/DC
Mounting height: approx. 2–4 mTwilight controller: 5–1000 luxTime controller: 2, 5, 10, 15 mins or pulse 1 secProtection class: IP 20 indoor mounting / class IITemperature: 0° C to + 40° CDimensions exposed: 85 mm x 85 mm, 75 mm depthDimensions concealed: 86 mm x 86 mm, 35 mm depth3 year warranty
Cost savings with intelligent light and heating / ventilation / air conditioning management
The Swiss Garde Presence ensures optimum energy managementwith 2 independent relays. Relay no 1 connects and controls thelighting depending on persons present and on brightness. Relay no 2 connects heating, ventilation or gongs, etc., potential-free andbrightness-independently. Both relays can be set to pulse functionor follow-up times via the time controller. According to requirements, the light (relay no 1) can be completelyswitched on and again off via the remote control provided. The automatic can thus be disconnected for lectures or on leaving theroom, and be connected again later on, according to requirements.With the predefined reach and 2-channel system, individual devicescan also be controlled via hand-held transmitter selectively. TheSwiss Garde presence detector can be applied as a fully automaticmachine with a make contact switch or as a semiautomatic ma-chine with a standard light switch. This unique technology allowssimple retrofitting of existing lighting systems!
included
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
max 16m
max 16m
max
16
m
Presence: 6 m
Accessories optional
Exposed framefor Swiss Garde 360 Presence
Item no 25440
PM remote controlON: light completely On for 6 hrs
(then back to auto function)ON: Relay 2 press 5 secs=fully automatic machineOFF: light completely Off for 6 hrs
(then back to auto function)OFF: Relay 2 press 5 secs=semiautomatic machineAuto: standard presence detector functionLearn: store current light value
Item no 25090
Safety guardDevice protection against balls and vandalism.
Dimensions: 150 mm Ø x 80 mmItem no 3331
Further accessories see p. 67
Operating instructions under www.zublin.de
![Page 6: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/6.jpg)
PM remote controlON: light completely On for 6 hrs
(then back to auto function)ON: Relay 2 press 5 secs=fully automatic machineOFF: light completely Off for 6 hrs
(then back to auto function)OFF: Relay 2 press 5 secs=semiautomatic machineAuto: standard presence detector functionLearn: store current light value
Item no 25090
Your advantages
• Passive infrared (PIR) presence detector for ceiling installation with EIB interface
• 4 pyrodetectors and a high-resolution lens detect smallest movements
• Fully automatic or semiautomatic machine: As a fully automatic machine, the lighting is automatically switched on and off, depending on presence and brightness. As a semiautomatic machine, the switch-on must always be carried out manually via a KNX pushbutton. Switich-off takes place automatically.
• A brightness sensor allows a reflected meter with linear output. A built-on optical filter is adjusted to the profile of the human eye.
• The light sensor can trigger in all operating modes a 0- or 1-frame, respectively, on exceeding or falling short of, respectively, a configurable lux value. The metered light value in lux can additionally be read via the bus.
6 7
Swiss GardePresence detector Swiss Garde
The Swiss Garde 360 Presence KNX/EIB model
Description Item no Price Euro
Swiss Garde 360 Presence KNX/EIB 25020 250.00
PM remote control 25090 20.00
Exposed frame 25440 15.00
Safety guard 3331 15.00
Spring clip adaptor 25410 10.00
Side view
Top view
Front detection =not sensitive Reach -50%
Detection tangential= sensitive
Accessories optional
Exposed framefor all Swiss Garde presence detectors.
Item no 25440
Swiss Garde 360 PresenceKNX/EIBPresence detector with KNX/EIB interface.
Nominal voltage: 24V DC (21V DC – 30V DC)Power input: 0.5 WDetection area: 360°Reach: 16 m, presence: 6 mPIR sensors: 4 pyrodetectors for large detection areaSensitivity: adjustable via ETS3: low – standard – highMounting height: 2 m–4 mSettings: all settings are via ETS3
with remote adjustabilityReflected meter: brightness sensor with optical filter and linear outputLight value: light value in lux readable via BUS Switching criteria: movement and brightnessKNX connection: double-pole bus terminal, with 4 plug terminals
each for wires of Ø 0.6 to 0.8 mm2
IR remote control: 2 channels CH1, CH2Function of remote control: ON: light On, OFF: light Off, AUTO: Automatic.
Release time configurableReach of remote control by infra-red equipment: max 6 m (with free visibility)Battery: 1x 3V CR 2032Protection class: IP 20 indoor mounting / class IIWorking temperature range: 0 to +40 °CDimensions of detector: 86 mm x 86 mm x 35 mmDimensions of remote con-trol by infra-red equipment: 65 mm x 28 mm x 7,5 mm3 year warranty
Properties/Assembly
Newly available is the Swiss Garde 360 presence detectorKNX/EIB with EIB interface for application within building systemengineering. With 4 pyrodetectors and a high-resolution lens, itdetects the smallest movements and evaluates each signal withfirst class electronics operated via a microcontroller. The followingoperating modes are programmable with the use of our presencedetector application software:
Light control channel: Following detection of a movement, the detectorsends a 1-frame or a configurable dimming value (0…100%). In case of absence of movement the presence detector sends a 0-frame or a secondconfigurable dimming value (0…100%) on expiry of a configurable follow-up time. Heating / air conditioning / ventilation control channel: thisoutput switches only after checking 2 to 20 consecutive observation win-dows of equal length, in each one of which at least one movement hasbeen detected. Master/slave mode: can be configured by setting the parameters via ETS3.With the optional IR remote control, the lighting channel can be switchedon or off unconditionally. After expiry of the configurable release time or by activating the AUTO button, the detector returns to its normal state.
NEW 08
included
Your advantages
• Motion detector with large detection area up to max 24 m diameter
• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Integrated short duration pulse function for the activation of staircase switches or gongs, etc.
• Short duration pulse pause time adjustable via PIR remote control to 20 or 60 secs
• Larger pulse pause time prevents switching noises • Additional pushbutton input for manual switching• Ideal for offices, schoolrooms, warehouses, corridors, etc.• Saves energy costs• New high-performance relay with high electronic control
gear switching capacity
The Swiss Garde 360 Presence Easy Concealed Model
Description Item no Price Euro
Swiss Garde 360 Presence Easy 25470 98.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Spring clip adaptor 25410 10.00
Swiss Garde 360 Presence EasyVersion 360° with large 24 m detection area for concealed ceiling installation, 1-channel
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 360°Reach: 12 m presence, max 24 m diameterMounting height: approx. 2 m–6 mTwilight controller: 5–2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The Swiss Garde 360 Presence Easy is a 1-channel presencedetector detecting the smallest movements with 4 pyrodetec-tors. It is suited for offices, schoolrooms, lounges and corridors,etc., and features a large detection area with 16 m diameter aswell as an integrated short duration pulse function. The high-performance relay allows the direct connection of fluorescentlights, and the high electronic control gear switching capacityensures a long life cycle. The Swiss Garde Presence Easy is remote controllable with the PIR hand-held transmitter, with justa push of the button to set the preferred parameter values.
NEW 08
optional
max. 16m
Side view
Top view
Sidewise approach = sensitive
max 24 m
max 24 m
max
24
m
90 mm
Mounting height Sitting persons Ø Walking persons ØDiameter Diameter
2.0 m 3 m 12 m2.5 m 4 m 14 m3.0 m 5 m 16 m3.5 m 6 m 18 m4.0 m 20 m
max 12 m presence
max 24 m motion
Front approach = not sensitive (distance–50%)
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Spring clip adaptorFor simple mounting without concealed socket. Dimensions: 57.5 mm x 57.5 mm
Item no 25410
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Further accessories see p. 67
Operating instructions under www.zublin.de
![Page 7: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/7.jpg)
Präsenzmelder Swiss Garde
Your advantages
• Sensor with smallest dimensions (diameter sensor head: 37 mm)
• Ceiling installation device with spring clips for easy and quick assembly
• All parameters remote controllable via PIR hand-held transmitter !
• Time controller with integrated short duration pulse function, reach and light controller
• Modular pins between power supply box and sensor• Advantageous connecting and assembly system for easy
and quick installation
8
The Swiss Garde 360 Presence Mini Model
Description Item no Price Euro
Swiss Garde 360 Presence Mini 25480 65.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Presence detector Swiss Garde
Swiss Garde 360 Presence MiniSensor with smallest dimensions. Remote controllable with PIR hand-held transmitter.
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: approx. 360° / 6 – 8 m (installed height 2.5 – 3.5m)Time controller: pulse, approx. 10, 30 secs, 1, 2, 6, 8, 12 minsTwilight controller: 10, 50, 150, 2000 luxTemperature range: -20 °C to + 55 °CProtection class: IP 20 (indoor mounting), class II,
Technical Inspection Agency SouthDimensions: sensor 37 Ø x 32 mm,Hole: 31 – 34 mmRelay unit: 127 x 23 x 23 mm3 year warranty
Cost savings with intelligent light management
The Swiss Garde Presence Mini ensures optimum energy man-agement. The sensor head is small and inconspicuous. It can befastened in the ceiling quickly and easily by means of the springclips provided. All parameters can be set via remote control atthe push of a button! The follow-up time can be set to pulsefunction or 1–12 mins via the time controller. The light connectedto relay no 1 is switched off automatically as soon as the naturalbrightness exeeds the value set in the device.The Swiss GardePresence monitors rooms up to 60m2, and with an additionalsensor up to 120 m2. Switched with 4 systems in parallel, up to500 m2 are covered.
Side view
Top view
9
Motion Detector Swiss Garde
Mounting height Sitting persons Ø Walking persons ØDiameter Diameter
2.0 m 3 m 5 m2.5 m 4 m 6 m3.0 m 5 m 7 m3.5 m 6 m 8 m4.0 m 10 m
Swiss Garde 360 PremiumVersion 360° with extra large detection area,waterproof for indoor and outdoor mounting
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 360°Reach: max 30 mMounting height: approx. 2 m– 4 mTwilight controller: 10–2000 luxTime controller: 10 secs to 12 mins short duration pulse 0.7 secsProtection class: IP 44 indoor and outdoor mounting / class IITemperature range: -20°C to +55°CDimensions: 125 mm diameter, height: 75 mm 3 year warranty
Properties/Assembly
The motion detector Swiss Garde 360 Premium is suited for large-area rooms, such as underground car parks, for which a splash-proof motion detector with a large detection area is desired. Dueto the adjustable ‘sens’ reach, the detection area adjusted opti-mally.
For larger installations we recommend the activation of the shortduration pulse function and to activate a time relay or a staircaseswitch.
The Swiss Garde 360 Premium Model
Description Item no Price Euro
Swiss Garde 360 Premium white 25050 98.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Safety guard 3331 15.00
1 2 3 4 5 6 7 89
SG 360 PremiumSG 360 Premium
SG 360
Plus KI
approx. 21 m
approx. 10 m
Side view
Top view
Front approach =not sensitive (distance–50%)
Sidewise approach = sensitive
max 30m
Accessories optional
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor function
Item no 25310
Accessories optional
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor function
Item no 25310
Safety guardDevice protection against balls and vandalism.
Dimensions: 150 mm Ø x 80 mmItem no 3331
Mounting height Sitting persons Ø Diameter
2.0 m 20 m2.5 m 24 m3.0 m 26 m3.5 m 28 m4.0 m 30 m
NEW 08
Front approach = not sensitive (distance–50%)
Sidewise approach= sensitive
max 30m
max
30
m
Further accessories see p. 67
optionaloptional
3.2
9
32
1.5
5 10
37
37
127
450
23
23
Hole: 31– 34 mm
Your advantages
• Motion detector with large detection area up to max 30 m diameter
• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Integrated short duration pulse function for the activation of staircase switches or gongs, etc.
• Short duration pulse pause time adjustable via PIR remote control to 20 or 60 secs
• Larger pulse pause time prevents switching noises • Ideal for underground car parks, staircases, warehouses,
corridors, etc.• Saves energy costs• New high-performance relay with high electronic control
gear switching capacity
Operating instructions under www.zublin.de
![Page 8: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/8.jpg)
Motion Detector Swiss Garde
10 11
Swiss Garde
max. 16m
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
max 16m
Swiss Garde 360 PlusVersion 360° with large detection area for concealed ceiling installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 360°Reach: 6 m to 8 m, max 16 m diameterMounting height: approx. 2 m – 4 mTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The motion detector Swiss Garde 360 Plus is suited for concealedceiling installation in larger rooms, such as underground car parks,staircases and corridors, for which a detection area of up to 16 mis desired. It is the ‘favourite’ of architects preferring a discrete,hardly visible motion detector. The detection area can be adjustedoptimally by means of the adjustable reach. We recommend toswitch in parallel up to 4 Swiss Garde 360 Plus.
Short duration pulse function
For larger installations, such as in schoolhouses, staircases,warehouses, etc., we recommend to apply the short durationpulse function and to energise the light via a time relay.
The Swiss Garde 360 Plus Models
Description Item no Price Euro
Swiss Garde 360 Plus white 25000 80.00
Swiss Garde 360 Plus black 25190 90.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Safety guard 3331 15.00
Spring clip adaptor 25410 10.00
Exposed frame 25400 15.00
Your advantages
• Discrete and flat design, special colours on request!• Motion detector with large detection area up to
max 16 m diameter• Settings of all parameters LUX/SENS/TIME manually or
via PIR hand-held transmitter• Integrated short duration pulse function for the activation
of staircase switches or gongs, etc.• Short duration pulse pause time adjustable via PIR remote
control to 20 or 60 secs• Larger pulse pause time prevents switching noises• Additional pushbutton input for manual switching• Ideal for underground car parks, staircases, warehouses,
corridors, etc.• Saves energy costs• New high-performance relay with high electronic control
gear switching capacity
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Spring clip adaptorFor simple mounting without concealed socket.Dimensions: 57.5 mm x 57.5 mm
Item no 25410
The Swiss Garde 360 Premium Concealed Models
Description Item no Price Euro
Swiss Garde 360 Premium concealed 25060 98.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Exposed frame 25400 15.00
Spring clip adaptor 25410 10.00
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
max 30m
The application ofthree IR sensors withLED display allowsoptimal functions.
Your advantages
• Motion detector with large detection area up to 30 m diameter!• Settings of all parameters LUX/SENS/TIME manually or via
PIR hand-held transmitter• Integrated short duration pulse function for the activation of
staircase switches or gongs, etc.• Short duration pulse pause time adjustable via IR remote
control to 20 or 60 secs• Larger pulse pause time prevents switching noises • New performance relay with high electronic control gear
switching capacity• Ideal for underground car parks, staircases, warehouses,
corridors, etc. - saves energy costs• New high-performance relay with high electronic control
gear switching capacity
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Spring clip adaptorFor simple mounting without concealed socket.Dimensions: 57.5 mm x 57.5 mm
Item no 25410
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Mounting height Sitting persons ØDiameter
2.0 m 20 m2.5 m 24 m3.0 m 26 m3.5 m 28 m4.0 m 30 m5.0 m 32 m
** For larger detection areas the time controller must be set to maximum!
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
max 30m
max
30
m
Exposed frameFor exposed installation on concrete ceilings, etc.
Item no 25400
max 16m
max
16
m
optional optional
Exposed frameSwiss Garde 360 Pluswith exposed frame
Item no 25400
Flat, discrete desing and large detection area.
Operating instructions under www.zublin.de
Swiss Garde 360 Premium ConcealedVersion 360° with large 24 m detection area for concealed ceiling installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 360°Reach: 6-16 m, max 30 m diameterMounting height: approx. 2 m – 4 mTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The motion detector Swiss Garde 360 Premium Concealed is suited forconcealed ceiling installation in larger rooms, such as offices and corri-dors, for which a detection area up to 30 m is desired. The detectionarea can be adjusted optimally by means of the adjustable reach. Werecommend to connect in parallel up to 4 Swiss Gard 360 Premiums.
Short duration pulse function
For larger installations, such as in schoolhouses, staircases, ware-houses, etc., we recommend the application of the short durationpulse function and to energise the light via a time relay.
![Page 9: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/9.jpg)
13
The Swiss Garde 3000 IR Model
Description Item no Price Euro
Swiss Garde 3000 IR Concealed+Exposed 26400 120.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Swiss Garde
optional
Motion Detector Swiss Garde
12
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via IR hand-held transmitter
• 24 V version for PLC and feeble current installations• large detection area of max 16 m diameter with 3 Top-
quality pyrodetectors• Device can be installed into a standard switch box• Adjustable ‘SENS’ detection reach• Elegant, discrete, motion detector favoured by architects• Concealed or exposed installation (by means of exposed
frame)
Swiss Garde 360 24V ConcealedVersion 360° with large detection area for concealed or exposed ceiling installation
Nominal voltage: 20-26V AC or DCSwitching capacity: 5ADetection area: 360°Reach: 6 m to 16 mMounting height: approx. 2 m – 8 m, max 16 m diameterTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse, 7 secs to 9 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The motion detector Swiss Garde 360 24V Concealed is suited forconcealed ceiling installation in larger rooms, such as offices andcorridors, for which a detection area of up to 16 m is desired. It is the‘favourite’ of architects preferring a discrete, hardly visible motiondetector. The detection area can be adjusted optimally by means ofthe adjustable reach. We recommend to connect in parallel up to 4 Swiss Garde 360 24V Concealed.
Short duration pulse version
For larger installations, such as in schoolhouses, staircases, warehouses, etc., we recommend to apply the short duration pulse function and to energise the light via a time relay.
The Swiss Garde 360 24V Concealed Model
Description Item no Price Euro
Swiss Garde 360 24V white 25500 120.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Spring clip adaptor 25410 10.00
Safety guard 3331 15.00
max. 16m
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
max 16m
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Spring clip adaptorFor simple mounting without concealed socket.Dimensions: 57.5 mm x 57.5 mm
Item no 25410
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mm
Further accessories see p. 67Item no 3331
max 16m
max
16
m
optional
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Optional mini hand-held transmitter On/Off/Automatic• Flat installation on a cover plate or wall installation on an
exposed socket• Detection 180° horizontally, 90° vertically, mounting at
1– 5 m height• Standard timer and integrated short duration pulse for the
activation of staircase switches and gongs, etc.• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• ON/OFF/AUTO and holiday function etc. via PIR hand-held
transmitter• New high-performance relay
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
NEW 08
For ceiling installation For wall installation with cover plate with exposed socketl
Exposed socket and cover plate
included in delivery
Swiss Garde 3000 IRVersion for concealed ceiling installation with creep zone protection
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt / 10A ohmic (cos ϕ 1,0)
1150 Watt / 5 A inductive (cos ϕ 0,5)1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max , 2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 200° horizontally + 360° creep zone protectionMounting height: approx. 1m – 5 mReach: approx.14 m front and approx. 7 m sidewise, Ø 5m creep
zone protectionTwilight controller: 5 – 2000 LuxTime controller: short duration pulse or 10 secs to 12 minsProtection class: IP 54 Splash-proof / class IITemperature range: -30° C to + 55° CDimensions: 86 mm x 86 mm x 68 mm (on plate)
70 mm x 70 mm x 88 mm (on exposed socket)3 year warranty
Properties/Assembly
The Swiss Garde 3000 IR is a perfect handyman, ideal for ceilingand wall installations outdoors and indoors. Depending on require-ments, it can be clicked onto a round exposed socket, a flat coverplate 87 x 87 mm, or onto the Züblin 500W and 150W floodlights.The new detector is a flexible all-rounder with small dimensionsand a timer with integrated short duration pulse. It is waterproofIP54, provided with a detection area of 180° and another one thatis 360° directed downwards, and is remote controllable with thewell-known PIR hand-held transmitter.
IIPP5544
CLICK !The Swiss Garde 3000 IR is delivered with a roundexposed socket and a square cover plate; ideal forwall or flat ceiling installations!
The application of threeIR sensors with LED display allows optimalfunctions.
Operating instructions under www.zublin.de
The little flexible and flat all-rounder !
Click !
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
200° horizontally + 360° creep zone protection
![Page 10: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/10.jpg)
14
Motion Detector Swiss Garde
15
Presence Detector Swiss Garde
The Swiss Garde 290 IR Model
Description Item no Price Euro
Swiss Garde 290 IR 25250 95.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
0
Swiss Garde 290 IR Corner InstallationNominal voltage: 230 V / 50 HzSwitching capacity: 2000 Watt /10A ohmic (cos ϕ 1.0)
1000 Watt / 5 A inductive (cos ϕ 0.5)Detection area: approx. 360°/15mReaches IR Regulation: 6 m to 15 m, depending on mounting heightTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsLight value: approx. 10 lux – 2000 luxProtection class: IP 44Temperature range: -20° C to + 55° CDimensions: 130 mm x 115 mm(+40) x 80 mm
heightxdepthxwidth3 year warranty
Properties/Assembly
The Swiss Garde 290 IR is designed for corner installation andmonitors 2 house fronts with a 360°/15 m detection area simulta-neously.
The reach, follow-up time and lux value can be set at the devicedirectly or via the PIR remote control.Monitoring of the right and left house fronts can be determinedindividually with the aid of a suitable blind.Ideal mounting height: 2 – 4 m, waterproof IP44.
Short duration pulse function
In case too many electronic control gears and fluorescent lightsare energised, we recommend the short duration pulse functionwith a timing relay.
15m
15m
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
Setting of the potentiometer manually or via PIR remote control.
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via IR hand-held transmitter
• Large 360°/15 m detection area with creep zone protection• Simple and quick installation with slide closure• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• Integrated short duration pulse function with pause time
selectable via PIR hand-held transmitter• ON/OFF/AUTO and holiday function etc. adjustable
via PIR hand-held transmitter• Reach control via PIR hand-held transmitter and via blind• Mini hand-held transmitter for ON/OFF/AUTO switching
as an option• Transmission of all selected parameters at the push
of a button
Accessories optional
Item no 25320 see p.4
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor function
Item no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function
PIR hand-held transmitter
IP44
15m
Side view
Further accessories see p. 67
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via IR hand-held transmitter
• Concealed presence detector, suited for wall installation at a height of 1 m – 2.5 m
• Device can be installed in any standard switch box• Additional pushbutton input for manual switching• Additional switch contact for the control of heating /
ventilation / air conditioning • Detection reach adjustable via ‘SENS’ potentiometer• Simple installation with factory program setting • New high-performance relay
Swiss Garde 300 PresenceConcealedPresence detector for wall installation
Nominal voltage: 230 V / 50 HzSwitching capacity channel1: 2000 Watt / 500 VA 10 A (cos ϕ 1.0),
channel 2: 500 W, 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 180°Reach: 6 m – 10 m, presence: 3 – 4 mMounting height: approx. 1 m – 2.5 mTwilight controller: 5 – 1000 luxTime controller: short duration pulse 0.7 secs, 7 secs to 5 minsProtection class: IP 44 for outdoor and indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The Swiss Garde 300 Presence Concealed is ideal for assemblyabove a door or at the height of the switch to replace a pushbut-ton. It is suited for offices and meeting rooms etc in which installa-tion of ceiling detectors is not ideal. The automatic light control,depending on presence and daylight, prevents unnecessary powerconsumption by means of the cut-off mechanism.
The Swiss Garde 300 Presence Concealed Model
Description Item no Price Euro
Swiss Garde 300 Presence Concealed 25210 110.00
Swiss Garde 300 Presence 24 V Concealed 25230 110.00
Swiss Garde 300 Presence KNX/EIB 25240 250.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Exposed frame 25400 15.00
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
Mounting height Reach
1.0 m 6 m1.5 m 7 m2.0 m 8 m2.5 m 9 m3.0 m 10 m
Application of pyrodetectors for optimal detection area
IP44
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Further accessories see p. 67
optional optional
NEW
Available from
1.1.08
Operating instructions under www.zublin.de
![Page 11: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/11.jpg)
17
Motion Detector Swiss GardeMotion Detector Swiss Garde
16
Side view 90° vertical detection
Top view/detection180°/10m
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
The Swiss Garde 300 D IR Model
Description Item no Price Euro
Swiss Garde 300 D IR, white incl. hand-held transmitter 25290 80.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
.00
Your advantages
• Setting of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Optional mini hand-held transmitter On/Off/Automatic• Additional pushbutton input for manual switching• Fits into any standard switch box• Can be combined with other branded switch programs• Detection 180° horizontally, 90° vertically, mounting
at 1– 5 m height• Standard timer and integrated short duration pulse for
the activation of staircase switches and gongs, etc.• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• Integrated short duration pulse function with pause time
selectable via PIR hand-held transmitter• ON/OFF/AUTO and holiday function etc. via PIR hand-
held transmitter• New high-performance relay
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
New electronic with levelling of reach!
NEW 08
max 10 m
max 10 m
The Swiss Garde 180 IR Concealed Model
Description Item no Price Euro
Swiss Garde 180 IR Concealed white 25280 80.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
0
Swiss Garde 180 IR ConcealedFor wall installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5), 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 180°Reach: 12 m maxMounting height: approx. 1 m – 1.5 mTwilight controller: 10 –1000 luxTime controller: 7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 for indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
Swiss Garde 180 IR Concealed is ideal for assembly at theheight of the switch to replace a pushbutton. It features a dis-crete design. The detection area can be adjusted optimally bymeans of the adjustable reach.
Short duration pulse version
For larger installations, such as in schoolhouses, staircases,warehouses, etc., we recommend to apply the short durationpulse function and to energise the light via a time relay.
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Integrated short duration pulse function for the activation of staircase switches or gongs, etc.
• Short duration pulse pause time adjustable via PIR remote control to 20 or 60 secs
• Larger pulse pause time prevents switching noises• Additional pushbutton input for manual switching• New high-performance relay with high electronic control
gear switching capacity• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Application of two pyrodetectors for optimal detection area
max 12 m
max 12 m
max
12
m
Further accessories see p. 67
Swiss Garde 300 D IRVersion for concealed wall installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)
1150 Watt / 5 A inductive (cos ϕ 0.5), 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max
Detection area: 180° /90°/12mMounting height: approx. 1 m – 2.5 mReach: approx. 6-10 mTwilight controller: 10 –2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: -0° C to + 35° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
The Swiss Garde 300 D IR detects horizontally and vertically by means of 3 pyrodetectors. It is therefore suited for installationat a height of 1 – 2.5 m and offers advantages in the staircasewith its vertical detection. It fits into any standard switch boxand, with its standard timer and integrated short duration pulsefunction, is suited for direct light switching or also for energising relays and staircase switches. The new detector is remote con-trollable via the PIR hand-held transmitter. With an additional intermediate frame, the Swiss Garde 300 D IR fits into the German branded switch programs as per DIN 49075. The 50 x50 mm cover plate is available in pure white, similar to RAL9010. Other colours on request.
optional optional
Covering fits into the brandedswitch programsas per DIN 49075
max
10
m
Operating instructions under www.zublin.de
![Page 12: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/12.jpg)
Motion Detector Swiss Garde
18
Swiss Garde 360 WMWaterproof IP 44 version for wall installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 2000 Watt / 10 A (cos ϕ 1.0)
500 VA / 2.5 A (cos ϕ 0.5)Detection area: 180°Reach: 6 m – 10 m, depending on mounting heightMounting height: approx. 1 m – 3 mTwilight controller: 5 –1000 luxTime controller: 7 secs to 5 minsProtection class: IP 44 for outdoor and indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty
Properties/Assembly
Swiss Garde 360 WM is waterproof and ideal for assemblyabove a door or at the height of the switch to replace a pushbut-ton. It can be applied outdoors and indoors and features a dis-crete design. The aluminium version is optimally integrated onconcrete walls or is recommended in combination with alumini-um or stainless steel lights.The detection area can be adjustedoptimally by means of the adjustable reach.
Swiss Garde 360 WM Short Duration PulseShort duration pulse model for time relay or gongTechnical data as for WM model/ Pause time: approx. 5 secs - 60 secs
The pause time between 2 pulses is 30 secs. This is advanta-geous for avoiding unnecessary pulse noises. For larger installa-tions, such as in schoolhouses, staircases, warehouses, etc., werecommend to apply short duration motion detectors and to ac-tivate the light via a time relay.
The Swiss Garde 360 WM Models
Description Item no Price Euro
Swiss Garde 360 WM white 25100 65.00
Swiss Garde 360 WM aluminium 25110 65.00
Exposed frame 25400 15.00
Safety guard 3331 15.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
Application of two pyrodetectors for optimal detection area
Aluminium model, suitable for installationon concrete walls or in combinationwith aluminium or stainless steel lights.
Mounting height Reach
1.0 m 6 m1.5 m 7 m2.0 m 8 m2.5 m 9 m3.0 m 10 m
Your advantages
• Splash-proof IP 44 for outdoor mounting• Concealed motion detector, suited for wall installation at a
height of 1 m – 3 m• Device can be installed in any standard switch box• Detection reach adjustable via ‘SENS’ potentiometer• Optimal for assembly above a door• Concealed installation in inlet socket (outdoors and indoors)
or exposed installation with exposed frame
Accessories optional
Exposed framefor all Swiss Garde models ofseries 360 and 180, (except E-CH)
Item no 25400
IP44
Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mmItem no 3331
19
The Swiss Garde MZ5000 Kit Models
Description Item no Price Euro
Swiss Garde MZ5000 kit 26350a 220.00
v
Motion detectorNominal voltage 230V, 50HzDetection area 360° + 200°/16 m(over the entire area)Creep zone protection with360°-vertical detection Internal limitation of reach2 integrated relays 16 A / 10A2 time controllers, light and holiday controller
Pluggable HF aerial moduleReach 100 m free visibilityIntegrated programming key
5 year warranty, CE, Technical Inspection Agency South, IP 54, RoHS compliant
Swiss Garde MZ 5000HF control pad 2-wayReach 100 m free visibility2-way, 433 MHzBidirectional information exchangeOn, Off, Holiday and Test functionLight value storage, reach controller, etc.250 channels, 4 programmable at a time10 programmable acoustic signals Controllable sound levelLED signal lamp
MZ5000 will then switch on the light for 3.5 hours everyevening, as if you were at home. And for the time after, thesensor will work with its standard detection functions. The additional interactivity between 2 sensors makes the SwissGarde MZ 5000 an outstanding innovation. The wireless in-teractivity allows brilliant installations for more security andpower saving.
Swiss Garde MZ 5000 – for protection, comfort and power savingThe new Swiss Garde MZ 5000 is a premium motion detectorfor outdoor and indoor mounting. It switches the light on andoff according to requirements, and an excellent 360°+200°/15m detection area ensures quick and reliable detec-tion. Most modern electronics with holiday function and lev-elling of reach offers many functions for maximum comfortand security.
First motion detector with bidirectional information exchangeIf the Swiss Garde MZ 5000 is retrofitted with a pluggable aer-ial module and a control pad, the detector is interactive. Nowyou can switch it on and off across doors and walls and receive signals from each one of your detectors. For example,an alarm signal will warn you if there is someone in thegarage, and a ding-dong will sound, as soon as there is some-one at the entrance.
Security functionsBefore your holiday, just activate the security mode aroundyour home for maximum protection. Your Swiss Garde
Now you can control your motion detector across the walls!First motion detector with bidirectional information exchange
Light control – from the comfort of your sofaFor the first time a motion detector can be easily switched on and off across doors and walls and be programmed to security!
Advantageous: control pad with wall holder in light switch format.Operation: On/Off/Automatic, Holiday, Acoustics/Sound level, Party, etc.
Now you know when someone is here !As soon as someone approaches the sensor, thelight is switched on immediately and, additionally,the detector sends a radio signal to the controlpad. Depending on programming, you will hear ading-dong, an alarm signal or a ring tone.
Swiss Garde MZ 5000 white, Item no 26350Action kit Item no 26350AComplete set with detector, Bidi module and control pad
optional
Item no 25320 see p.4
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function
PIR hand-held transmitter
Operating instructions under www.zublin.de
![Page 13: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/13.jpg)
Swiss Garde MZ 5000For ceiling and wall installation with 2 relays and large detection area
Nominal voltage: 230 V / 50 HzSwitching capacity relay 1: max 2300 W light bulbs (cos ϕ = 1)
max 1150 VA inductive (cos ϕ = 0.5)Switching capacity relay 2: max 5 A
Detection area: 180° + 360° / 15 m over the entire areaTime controller: 3 secs to 30 mins /+short duration pulseLight value storage: 2 lux to daylightHoliday controller: 2-8 hrs from duskProtection class: IP 54, RoHS, CETemperature: -25° C to + 55° CDimensions: 95 mm x 109 mm x 107 mm (height x width x depth)5 year warranty
Creep zone protection with 360° vertical detection Internal limitation of reach2 integrated relays 16A/5A
Excellent for more security and power saving!
The Swiss Garde MZ 5000 is a premium motion detector for out-door mounting or for mounting in hallways, staircases, garages,workshops, etc. Its 16 A relay switches loads of up to 2300 Watt,and the additional 5 A relay is mostly used for the activation ofventilators and ventilation systems. The Swiss Garde MZ 5000can be made into a motion detector with bidirectional informa-tion exchange by means of a bidirectional cartridge.
Motion Detector bidirectional Swiss Garde
21
Motion Detector Swiss Garde
20
Swiss Garde MZ 5000 Bidirectional
Description Item no Price Euro
Bidi module (aerial white) 26800 25.00
Bidi module (aerial black) 26810 25.00
Bidi module (aerial aluminium) 26820 25.00
Bidi pad (control pad white) 26370 50.00
Bidi pad (control pad aluminium) 26360 50.00
Bidi moduleReach: 100 m free visibilityTransmission frequency: 433 MHzHF sender and receiver modulePluggable (Bidi mode)Send/Receive data:can be combined with max 2 control padsand/or 4MZ 5000 BidirectionalBidirectional information exchange
CE, IP 54, RoHS compliant5 year warranty
Bidirectional module can be applied at the standard modelwith a few hand movements.
Bidi module + Bidi pad = Bidi set
Relay 1 OFF (12hrs)Relay 1 AUTORelay 1 ON (12hrs)
LED
Holiday mode(3.5 hrs)
Choice of tune
Sound level ofring tone
Relay 2 OFF (12hrs)Relay 2 AUTORelay 2 ON (12hrs)
Learn key (lux value)
Party mode (max 6 hrs)
Trial run
Programming key
Loudspeaker
Controlpad
Reaches:5 m, 10 m, 15 m
Your advantages
• Bidirectional information exchange• HF programming across walls• Switching On/Off, shock lighting, etc. on distances up
to 100 m (free visibility)• Control pad with 10 acoustic signals• Motion detector for recognition, for example:
- Alarm sound at the garage- Ding-dong at the entrance
• Conversion from motion detector to bidirectional function in no time at all
• Interactivity between the motion detectors• Flexible parallel circuit without cable (also over different
fuse groups)• Two-way or one-way initialisation
Swiss Garde MZ 5000
Description Item no Price Euro
Swiss Garde MZ 5000 white 26350 130.00
Swiss Garde MZ 5000 black 26340 130.00
Swiss Garde MZ 5000 aluminium 26330 130.00
Corner socket white 26510 10.00
Corner socket black 26530 10.00
Corner socket aluminium 26520 10.00
Side view Top view
DuskHoliday modeOFF, 2-8 hrs
Tilt LSensor tilt left(adjustment of reach)
LuxTwilight sensorfor relay 1Learn, 2-daylight
Time 2Follow-up time relay 2Pulse, 3 secs – 30 mins
Time 1Follow-up time relay1Pulse, 3 secs – 30 mins
Tilt RSensor tilt right(adjustment of reach)
To reach the controllers: Carefully pull the sensor head out of the anchorage.The sensor head can be rotated by +/- 45°.
Your advantages
• 1-screw or 2-screw mounting for simple and quick installation
• 2-screw mounting corresponds to Swiss Garde MZ 2000 screws, for simple and quick replacement
• Wide wiring space for easy assembly • Wall and ceiling, indoor or outdoor corner mounting possible• Large detection area: 180°+ 360°/15m• Time, light and holiday controller with internal setting of
reach, short duration pulse function• Light value storage with memory• 2 relays for light + heating / ventilation / air conditioning• 15 m detection area, sidewise also• 5 year warranty, IP 54, CE, RTTE
Swiss Garde MZ5000 + Bidi set = Swiss Garde MZ 5000 Bidirectional
Lens blindsincluded
Wide connection space for simple and easy ceiling or wall installation.
Swiss Garde MZ 5000 bidirectionalWith bidirectional information exchange. Sending and receiving information via HF control pad
Control padReach: 100 m free visibilityTransmission frequency: 433 MHzBidirectional information exchangeOn, Off, Holiday and Test functionLight value storage, etc.Adjustment of reach: 5 m, 10 m, 15m250 channels, 4 programmable at a time10 acoustic signals, controllable sound level2 LED signal lampsCE, IP 54, RoHS compliantDimensions control pad: 150mm x 50mm x 16mmDimensions with holder: 162mm x 85mm x 17mm
NEW
NEW
15 m
3 year warranty !
S
wiss Garde MZ 5000
M. Züblin AG
3 yearwarranty !
IP54
IP54
Corner socket for outdooror indoor corner mounting
Bidirectional, interactiveSee p. 62, 63
Assembly
The Swiss Garde MZ 5000 Bidirectional features interactivity be-tween two detectors and bidirectional information exchange witha control pad. For maximum radio reach, the MZ 5000 shouldnot be mounted on or near metal and iron, and the mountingheight should be at least 2 – 2.5 m. Due to the interactivity, twoMZ 5000s can be connected wirelessly in parallel, and thisacross different fuse groups.
Before final installation we recommend to check the radio trans-mission by means of the control pad and to remove parasitic frequencies and also materials and devices reducing the reach.
Bidirectional, interactiveSee p. 62, 63
180°/ 360°
Operating instructions under www.zublin.de
![Page 14: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/14.jpg)
Motion Detector Swiss Garde
22
Swiss Garde 360 HFHF wall installation and ceiling detector
Nominal voltage: 230 V / 50 HzHF transmitter power: 1 mWSwitching capacity: 1000 Watt / 5 A, 500 VA (cos ϕ 1.0)
500 VA inductive (cos ϕ 0.5)Detection area: 360° wall or ceiling installationReach: 1-8 m controllableTwilight: approx. 10-1000 luxTime set: approx. 5 secs - 30 minsProtection class: IP 20, I, CEDimensions: 40 mm x 30 mm x 120 mm 3 year warranty
Properties/Assembly
The Swiss Garde HF switches the lighting on and off automaticallydepending on motion and daylight. Due to its high frequency tech-nology, the integrated sensor reacts to the smallest movements ofthe person moving, even without ‘free visibility’.The sensor is particularly suited for interior rooms, reduces currentconsumption and saves on energy costs.
HF Sensor 360 Assembly
Nominal voltage: 230 V / 50 HzHF transmitter power: 1 mWSwitching capacity: 1000 Watt / 5 A, 500 VA (cos ϕ 1.0)Detection area: 360° ceiling , or 160° wall installation Reach: 1-12 m controllableTwilight: approx. 20 lux daylightTime set: approx. 8 secs - 12 minsProtection class: IP 20, I, CEDimensions: 90 mm x 40 mm x 43 mm 3 year warranty
The HF Sensor 360 Assembly is suited for light or ceiling installa-tion. It can be installed invisibly behind a wooden plate or a ceilingprovided with holes, and requires for detection only an opening of35 mm or 2 x 5 mm diameter.
The Swiss Garde HF Model
Description Item no Price Euro
Swiss Garde 360 HF 2737 80.00
HF Sensor 360 Assembly 2736 75.00
Swiss Garde 320 HF Concealed 27350 98.00
max 8m
Your advantages
• HF sensor reacts well even with temperatures of 30 – 40° Celsius
• Detects smallest movements even without free visibility• Can be installed behind the ceiling (with wood, open
metal, etc)• Time and light values and reach are adjustable• Switching of lighting according to requirements, saves
current and energy coss• Ideal in corridors, staircases, vestibules and garages, etc
Side view
max 8m
max
8m
360°
Wall installation
Ceiling installation
360°
160°
max 8m
max
8m
max
8m
max 4m
Operating instructions under www.zublin.de
approx. 1000 mW < 1 mW
The HF sensor sendsout a signal requiringless than 1 mW andthus emits 1000 timesless than a convention-al mobile phone!
Swiss Garde 320 HF ConcealedNominal voltage: 230 V / 50 HzFrequency range: 10,525 GHzHF transmitter power: 1 mWSwitching capacity: 2300 Watt / 10A (cos ϕ 1,0) 1150 VA / 5A inductive (cos ϕ = 0,5)Detection area: 180° wall installationMounting height: Wall installation 1.1m – 1.5mReach: Controllable 1-8 m / front max 15mTwilight: approx. 10-1000 luxTime set: approx. 8 secs – 12minsProtection class: IP20,I, CEDimensions: 80 mm x 80 mm x 20 mm3 year warranty
The Swiss Garde 360 Assembly is suited for concealed wall andceiling installation.
Available from
1.1.08
NEW 08
![Page 15: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/15.jpg)
Motion detectorspp. 24–30Infra Garde
Infra Garde Survey
23
Infra GardeCamtec PIRItem no 3330
Infra GardeCamtec PIR Camera
Item no 4030
Infra GardeCamtec Dummy
Item no 7535
Installable dimmer
Item no 6072
Radio SwitchHF Radio Pushbutton
Item no 6040
Infra Recept10A ReceiverItem no 6050
Infra DetecRF 180
Item no 6010
Infra Garde12V
Item no 3323
Infra Garde180 Concealed
Item no 3220
Infra Garde140 Plus
Item no 3020
Infra Garde200 Plus
Item no 3060
Infra Garde270 Concealed
Item no 3120
Infra Garde360 ExposedItem no 3327
Radio remote controlsp. 31
Infra Garde
Camerasp. 32
Camtec
3 yearwarranty !
Infra Garde
M. Züblin AG
3 yearwarranty !
Infra Garde360 PresenceItem no 3505
Infra GardeMaxum
Item no 3070
Infra ReceiverAdaptor PlugItem no 6070
![Page 16: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/16.jpg)
Infra Garde
25
Motion Detector Infra Garde
24
The Infra Garde 360 Presence model
Description Item no Price Euro
Infra Garde 360 Presence 3505 98.00
IR hand-held transmitter 3506 20.00
Safety guard 3331 15.00
Your advantages
• Two independent relays for lighting, heating, ventilation, etc.• IR hand-held transmitter On/Off/Automatic: applicable
selectively!• IR remote control adjustable to relay 1 (channel 1) or
relay 2 (channel 2)• Time controller with integrated short duration pulse function
and light controller• Advantageous connecting and assembly system
Safety guard(Option)
4 pyrode-tectors
L = Phase = RedN = Neutral Conductor = BlueL’ = Connected = BrownPotential-free 5A = Black
Presence and Motion
Accessories optional
Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mm
Item no 3331
The Infra Garde 360 Exposed model
Description Item no Price Euro
Infra Garde 360 Exposed white 3327 45.00
Safety guard 3331 15.00
Infra Garde 360 ExposedNominal voltage: 230 V / 50 HzSwitching capacity: 2000 W / 10 A (cos ϕ 1.0)
500 VA / 2.5 A (cos ϕ 0.5)Detection area: 360°Reach: 6 m to 16 m depending on mounting heightMounting height: between 2 m and 4 m at the ceilingTwilight controller: 5 –1000 lux Time controller: 8 secs to 7 minsProtection class: IP 20 indoor mounting / class IITemperature: 0° C to + 55° CDimensions: 118 mm diameter x 60 mm 3 year warranty
Properties/Assembly
The Infra Garde 360 Exposed is installed at the ceiling and issuited for assembly in garages or in the corridor.
The integrated plastic guard in front of the lens protects the lensagainst vandalism. The detection area can be adjusted optimallyby means of the adjustable reach.
Top view
Front approach = not sensitive(distance–50%)
Sidewise approach= sensitive
Your advantages
• Large detection area up to max 16 m diameter with 3 IR sensors
• Reach controller• Time and twilight controller• Good cost/performance ratio• Simple exposed ceiling installation• Integrated lens safety guard• LED display
Accessories optional
Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mm
Item no 3331
with integrated pulse function
Infra Garde 360 PresenceInfra Garde 360 Presence:Nominal voltage: 230 V / 50 HzSwitching capacity relay 1: max 2000 W / 10 A (cos ϕ 1.0) 500 VA / 2.5 A (cos ϕ 0.5)
Switching capacity relay 2: potential-free contact max 5 ADetection area: 360°Reach: 12 m max, 8 m presence depending on heightMounting height: between 2 m and 4 m at the ceilingTwilight controller: 5 –1000 lux (relay 1 only)Time set: pulse, 2, 5, 10, 15 minsProtection class: IP 20 interior / class IITemperature: 0° C to + 40° CDimensions: 125 mm Ø x 75 mm3 year warranty
IR hand-held transmitter:Nominal voltage: 1 x battery 12 V type 23 AReach: 5 m - 6 m front to switchgear 360 presenceDimensions: 70mm x 25mm x 13mm
Properties/Assembly
The Infra Garde presence detector detects the smallest move-ments with 4 pyrodetectors and a high-resolution lens, and eval-uates every signal by means of first-class electronics. The InfraGarde Presence ensures optimal energy management through 2independent relays. Relay no 1 switches and controls the lightingdepending on persons present and on brightness. Relay no 2switches the heating, ventilation or gongs, etc, potential-free andindependently of brightness. Both relays can be set to pulsefunction or follow-up time via time controller. The light connectedto relay no 1 is switched off automatically, as soon as the naturalbrightness exceeds the value set on the device. Depending onrequirements, the light (relay no 1) can be entirely switched onand again off via the remote control provided. In this way the automatic can be disconnected for talks or on leaving the roomand again be reconnected later on according to requirements.With the predefined reach, individual devices can also be con-trolled selectively via a hand-held transmitter. The Infra GardePresence monitors rooms of up to 100 m2 and can be switchedin parallel for additional surfaces without any problems. The twofirst-class power relays switch up to 2000 W and ensure flawlessfunctioning even with FLs or energy-saving lamps. The newpresence detector is planned in a way to allow for its quick andeasy installation!
included
Operating instructions under www.zublin.de
![Page 17: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/17.jpg)
27
Motion Detector Infra Garde
26
Infra Garde 270For corner and wall installation
Nominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)
250 VA / 1.25 A (cos ϕ 0.5)Detection area: 270°Reach: 12 m front and 6 m sideMounting height: between 2 and 3 m at the cornerTwilight controller: 5-1000 luxTime controller: 20 secs - 10 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 70 mm x 80 mm x 120 mm 3 year warranty
Properties/Assembly
The Infra Swiss Garde 270 features a large detection area of270°. With its integrated corner socket, it is planned for externalcorner assembly at heights of 2 m – 4 m. It can, however, also be mounted on the wall without a corner socket.The IP 44 waterproof sensor is equipped with controllers for re-ach, time and light. All values can be adjusted continuously. TheInfra Garde 270 monitors 2 house fronts at the same time, with adetection reach of 6 m each. A competitive motion detector witha 3 year warranty!
IP44
The Infra Garde 270 model
Description Item no Price Euro
Infra Garde 270 white 3120 60.00
Side view
Top view
Front approach = not sensitive(distance–50%)
Sidewise approach= sensitive
Your advantages
• 270° detection area at 2 levels• Adjustable detection reach with reach controller• Time, reach and light controller• Demountable corner socket, advantageous construction
for waterproof corner socket even under difficult assembly conditions
• Pivoted and inclinable sensor head
Infra Garde
The Infra Garde Maxum model
Description Item no Price Euro
Infra Garde Maxum white 3070 65.00
Infra Garde Maxum black 3080 65.00
Infra Garde Maxum aluminium 3090 65.00
Safety guard 3071 10.00
Infra Garde MaxumNominal voltage: 230 V / 50 HzSwitching capacity: 2000 W / 500 VA Detection area: 360°+ 200°/15 mReach: 12 m front + 6 m sideTwilight controller: 5-1000 luxTime controller: approx. 5 secs – 12 minsProtection class: IP 55Dimensions: approx. 166 mm x 78 mm x 65 mm 3 year warranty
Properties/Assembly
The Infra Garde Maxum switches the lighting on and off auto-matically, depending on motion and daylight. It features a largeand dense detection area and is suited for wall installation at aheight of 2-3 m. The 1-screw (or 2-screw) fastening system al-lows quick assembly. Due to its unique blind system, the reachcan be adjusted to 15 m or 8 m with a few hand movements.Visibility or not of the optical warning system with flashing redLEDs can be selected at the same time. The activated warningsystem ensures maximum deterrence.
Your advantages
• Excellent connecting system for quick assembly• Large detection area 360°+ 200°/12m• 6 detection levels with creep zone protection• Unique blind system for control of reach with one hand
movement• Connectable optical LED warning system• Flat design, projection 65 mm only• Time, light and reach controller• Holiday circuit with time controller for continuous lighting
from twilight (max 8 hrs)• Ideal for exterior lighting, industrial areas, underground
car parks, staircases, warehouses, corridors, etc.• Protection class IP 55, CE, Technical Inspection
Agency South
Accessories optional
Safety guardDevice protection against balls and vandalism.Dimensions: 160 mm x 120 mm x 75 mm
Item no 3071
Maximum detection !360° + 200°/12 m
Reach 12 mLED visible
Reach 6 mLED invisible
Reach 12 mLED invisible
Reach 6 mLED visible
White Black Aluminium
Operating instructions under www.zublin.de
![Page 18: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/18.jpg)
The Infra Garde 180 Concealed model
Description Item no Price Euro
Infra Garde 180 concealed white 3220 55.00
Safety guard 3031 10.00
Infra Garde
29
Motion Detector Infra Garde
28
Light «On» Automatic«Sensor»
Light «Off»
Your advantages
• Concealed wall installation at a height of 1 m – 1.5 m
• Integrated short duration pulse function
• Fits into any standard device socket
• Integrated On/Automatic/Off switch
• Detection 180° at a horizontal level
• Competitive concealed motion detector
The Infra Garde 200 and 140 models
Description Item no Price Euro
Infra Garde 200 Plus white 3060 55.00
Infra Garde 200 Plus black 3050 55.00
Infra Garde 140 Plus white 3020 45.00
Infra Garde Plus 140 black 3010 45.00
Safety guard 3011 10.00
Side view
1 Front approach = not sensitive(distance–50%)
2 Sidewise approach= sensitive
1 1
2 2
Black
Top view140°
Top view200°
Accessories optional
Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mm
Item no 3011
Your advantages
• Simple and quick assembly• Detection area 200° or 140° at three different detection levels• Integrated short duration pulse function for the activation
of staircase switches, gongs, etc.• Sensor head can be inclined by 45° and be rotated by 20°
each time• Hinge clamp and snap fits• Switch-on of sensor via external break switch possible
(2 secs power failure)• Simple determination of detection area with blind clips or
levelling of the sensor head.
Standard circuit
With the option to activate the motion detector via an external pushbutton.
With clips for lens cover
Any adjustable detection area due to clips.
With integrated pulse function
Infra Garde 200 Plusand 140 PlusNominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)
250 VA / 1.25 A (cos ϕ 0.5)Detection area: Infra Garde 200 = 200° / Infra Garde 140 = 140°Reach: 12 m front and 6 m sideMounting height: between 2 and 3.5 m at the wallTwilight controller: 5-1000 luxTime controller: 1 sec pulse, 8 secs to 7 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 98 mm x 102 mm x 96 mm3 year warranty
Properties/Assembly
The Infra Garde 200 or 140 is a universal motion detector forsimple and quick assembly. The sensor head can be rotated 45° vertically and 20° horizontally each time. In addition, the detection area can be determined through lens cover clips. Excellent cost/performance ratio. With a sensor head inclineddownwards, it is often assembled shifted sideways above adoor. A hinge clamp and snap fit facilitate the assembly.
IP44
With integrated
pulse function
max 8 m
max
8 m
Operating instructions under www.zublin.de
Side view
Top view
Front approach = not sensitive(distance–50%)
Sidewise approach= sensitive
Infra Garde 180 ConcealedFor concealed wall installation with On/Automatic/Off manual control switch
Nominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)
250 VA / 1.25 A (cos ϕ 0.5)Detection area: 180°Reach: 8 m front and 5 m sideMounting height: between 1 m and 1.5 m at the wallTwilight controller: 5-1000 luxTime controller: 1 sec pulse, 7 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature: 0° C to +40° CDimensions: 80 mm x 80 mm x 53 mm3 year warranty
Properties/Assembly
The Infra Garde 180 Concealed is ideal for assembly at theheight of the manual control switch.
It detects at a horizontal level with an aperture angle of 5 degrees.In this way smaller animals are not detected.
Assembly is suited particularly for vestibules, corridors, staircas-es, WCs, garages, etc., and the measurements are planned forinstallation into a standard inlet socket.
A particularity of this sensor is that the manual control switch ishidden in the upper part of the casing and hardly visible. Thestandard OnOff light switch function and the automatic functioncan be set via the manual control switch.
![Page 19: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/19.jpg)
Z-Radio 433 MHz Radio Remote Control
31
The Z-Radio models
Description Item no Price Euro
Infra Detec RF DC 6 V 6010 60.00
Concealed installation dimmer 6072 45.00
Radio receiver RE 10 A 6050 40.00
Internal adaptor plug 6070 30.00
Radio pushbutton 6040 25.00
Motion Detector Infra Garde
30
Infra Detec RFNominal voltage: DC 6 V (4 x 1.5 V LR6)Transmitting power: 2 … 5 mW ERP, Freq.: 433.92 MHzReach, free visibility: max 50 m (30 m)Time controller: approx. 5 secs - 5 mins pauseDetection area: approx. 180º / 12 mDimensions: 120 mm x 88 mm x 125 mm3 year warranty
Properties/Assembly
The light or other consumer loads can be switched on or off wi-relessly with modern high frequency technology. The radio signalworks with distances up to 30 metres across doors and walls! Inthis, hand-held transmitters, radio motion detectors, radio gongsand 10A receivers can be freely combined.Choose yourself whether the radio motion detector is to activatethe light, the gong or both together at the same time! Or whetherthe light is to be controlled automatically by the sensor in the ga-rage and the sensor at the entrance! Different codings with 256combinations allow distribution into different groups. Disturban-ces from the outside can this way be prevented and the functi-ons be optimised!
IP44I ETS 30020
Your advantages
• Undesired but also desired visits will be announced in your home automatically
• 230 V model for electric supply or DC 6 V model available• A pleasant ding-dong will be heard and/or the lighting is
switched on automatically• With no annoying cables, simple and quick installation
Radio pushbuttonNominal voltage: 12 V DCDistance max: 50 m free visibilityDimensions: 80 mm x 80 mm x 18 mm
Radio Receiver 10 ANominal voltage: 230 V ACSwitching capacity: 10 A / 230 V ACTime controller: 5 secs to 5 mins (in combination with BWM)Possible number of codes: 256Working temperature: -10° C to +45° CDimensions: 80 mm x 80 mm x 36 mm
Concealed Installation DimmerNominal voltage: 230 V ACSwitching capacity: 60 W– 250 W for Ohm resistive loadsReception: 30 m maxDimensions: 47 mm x 47 mm x 40 mm
For combination with radio pushbutton andhand-held transmitter!
The Infra Garde 12V model
Description Item no Price Euro
Infra Garde 12V white 3323 60.00
Infra Garde 12VNominal voltage: 12 V DC or AC.50 / 60 HzSwitching capacity: 5 A max for 12 to 230 AC / 5 A max for 12 to 30 DCDetection area: 120°Reach: max 10 m frontMounting height: between 2 m and 3 m at the wallTwilight controller: 5-1000 luxTime controller: 6 secs to 12 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 60 mm x 70 mm x 110 mm3 year warranty
Properties/Assembly
The Infra Garde 12V is operated with 12 V AC or DC and is idealin combination with a solar system, for camping, on a ship or ina summer house, wherever no electric supply is available or alow current cable is desired.
The mounting base allows both wall and ceiling installation.
The low current device can be connected to a 12V battery and ismostly found with solar systems or in summer houses (Pleasenote: the voltage must be at least 11Volt!). Assembly and the lay-ing of extensive electric power lines in gardens or buildings canbe saved with the Infra Garde 12V!
IP54
Ceiling installation Wall installation
Standard Infra Garde 12 Volt
Nominal voltage: 12V DC or AC /50/60 Hz
Switching capacity: 5A max for 12–230V AC
5A max for 12–30V DC
Top view
Front approach = not sensitive(distance–50%)
Sidewise approach= sensitive
Side view
Your advantages
• The Infra Garde 12 V can be operated with 12 Volt DC or AC feed
• Ideal for application with a solar system in camping or on watercrafts
• Ceiling or wall installation, 120° detection area• Detection reach adjustable with «SENS» potentiometer
Item no 6072
Item no 6050 Item no 6040
Internal adaptor plugNominal voltage: 230 V ALPossible number of codes: 256Dimensions: 80 mm x 60 mm x 125 mm
Item no 6070
Operating instructions under www.zublin.de
Side view
Top view
Front approach = not sensitive(distance–50%)
Sidewise approach= sensitive
![Page 20: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/20.jpg)
Camtec Camera
32
The Infra Garde Camtec models
Description Item no Price Euro
Infra Garde Camtec motion detector 3330 82.00
Camtec sensor camera (with integrated video camera) 4030 130.00
Camtec dummy camera 7535 34.00
Infra Garde CamtecMotion detector in camera design!
Nominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)
250 VA / 1.25 A (cos ϕ 0.5)Detection area: 360°+120°Reach: 12 m front and 6 m sideMounting height: between 2 m and 3.5 m at the wallTwilight controller: 5-1000 luxTime controller: 8 secs to 7 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 98 mm x 102 mm x 96 mm3 year warranty
Properties/Assembly
The new camera motion detector from Züblin, along with thestandard version with motion detector, is also available with agenuine integrated camera which can be connected to a monitoror TV set. The motion detector then triggers an acoustic signalreminding to check the monitor, or it switches the light automati-cally on in order to illuminate the monitored area.
Intruders in the illuminated monitored area are displayed clearlyon the monitor! Much better than recorder takings!
IP44
Side view
Innovation
Versions
1. 360°/120° motion detector 2. Sensor video camera3. Dummy camera
120°+ 360° lens!
Mini-TV TV 128Item no 46700
20m incl.
Camera Camtec Item no 40300
230 V AC
Camtec sensor camera:
• Switch on the shock lighting !
• Acoustic warning !
• Watch the monitor !
• Activate the recorder !
Or digital video cassetterecorder DVR 4MDItem no 44000
The motion detector with maximum deterrence!Double 15 m detection area with backfield monitoring
Your advantages
• 230 V / 50 Hz motion detector and sensor camera available
• Doouble detection area: 360° +120°
• Adjustable horizontally and vertically
• Massive IP 44 aluminium casing for outdoor mounting
• Maximum deterrence!
Infra Garde Camtec for double security!Intruders will be even more deterred in the future! Infra GardeCamtec switches the shock lighting on automatically and scaresoff undesired visitors with its camera look additionally.
In camera direction, a whole house front of up to 12 m length ismonitored and, below the device, a 360° sensor ensures maxi-mum creep zone protection.The new motion detector thus moni-tors in front of, below and behind the camera, and this way in-truders do not stand any chance.
Intruders approaching from behind are also detected by the mo-tion detector and trigger the shock lighting or an acoustic signal!This means more security with an outstanding detection area!
Video camera
12 m2,5 m
Operating instructions under www.zublin.de
![Page 21: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/21.jpg)
• Stainless steel lights
• Ceiling lights
• Sensor lights
• Post lights
• Post floodlights
• Sensor floodlights
• Sensor lanterns
SensorLights
SensorLights
![Page 22: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/22.jpg)
3534
Sensor Lights Survey
Sensor ceiling lightspp. 36–37
Stainless steel sensor lightsp. 40
Cerc Lamp 360 E
Item no 2720
Cerc Lamp360 PL
Item no 2710
HF Glass 80 WSensor ceiling lights
Item no 2732
HF DekoSensor ceiling lights
Item no 2734
HF BlancoSensor ceiling lights
Item no 2735
Sensor ceiling lightspp. 38–39
Stainless steel sensor lightspp. 41–44
Sensor wall lights and lanternspp. 45–46
Lan-Tec360
Item no 2006
Kube-Tec360
Item no 2008
Ruby-Tec200
Item no 2205
Post-Tec200 Ruby
Item no 2545
Ball-Tec200
Item no 2200
Post-Tec200 Ball
Item no 2540
Co-Tec360
Item no 2489
Post-Tec200 Cove
Item no 2547
Ruby-Tec 360
Item no 2485Item no 25320
Corner socket for:Co-Tec 360Ruby-Tec 360Globe-Tec 360Ball-Tec 200Ruby-Tec 200Co-Tec
360Item no 2489Item no 25320
Globe-Tec 360 opal
Item no 2481Item no 25320
Globe-Tec 360 clear
Item no 2480Item no 25320
Globe lamp200 clear blackItem no 2310
Alu-Laterne200 black
Item no 2210
Alu-Laterne200 white
Item no 2220
Post lantern200 white
Item no 2530
Globe lamp200 clear whiteItem no 2320
Globe lamp200 opal blackItem no 2330
Globe lamp200 opal whiteItem no 2340
Sensor floodlightspp. 51–52
Sensor post lightspp. 46–47
GardenRuby black
Item no 2610
GardenRuby white
Item no 2620
GardenDC 180 blackItem no 2510
GardenDC 180 whiteItem no 2520
Sensor floodlightwith stand
Item no 1270Homelite blackItem no 2050
Homelite whiteItem no 2060
BulpirBH-2 black
Item no 2030
BulpirBH-1 white
Item no 2020
BulpirBH-1 black
Item no 2010
12
Optional PIR hand-held transmitter:
HF Glass 120 WSensor ceiling lights
Item no 2733
HF SlimSensor wall lights
Item no 2731
HF Quad 160 WSensor ceilings lights
Item no 2739
HF Quad 80 WSensor ceilings lights
Item no 2738
Post lantern200 black
Item no 2535
Sensor floodlights with stand Sensor lightsSensor house number lights
pp. 48–50
Operating instructions under www.zublin.de
3 yearwarranty !
M. Züblin AG
3 yearwarranty !
Pro 150/180white Item no 1265
Pro 500/140white Item no 9812
Pro 150/3000 IR white Item no 1290
Pro 500/3000 IR white Item no 1280
![Page 23: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/23.jpg)
HF Blanco and DecoOpal Glass LightsFlat HF sensor ceiling or wall lights with 8 m detection area and invisible HF sensor
Nominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E27 (excl.), 1 x 60 W BlancoDetection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 300 mm Ø x 100 mm3 year warranty
Properties/Assembly
The HF ceiling light switches the lighting on and off automatical-ly, depending on motion and daylight. Due to its high-frequencytechnology, the integrated sensor reacts to smallest movementsof the moving person even without ‘free visibility’. The HF ceilinglights are mainly suited for interior rooms and, compared withconventional lights, they reduce current consumption and saveon energy costs.
The HF Glass 120 W and 80 W models
Description Item no Price Euro
HF glass 120 W 2733 119.00
HF glass 80 W 2732 96.00
Wall lights
HF Glass 120 W or 80 W80 W and 120 W glass lights
Nominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E27 (excl.) / 3 x 40 W, E27 (excl.)Detection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 400 mm Ø x 130 mm / 320 mm Ø x 110 mm3 year warranty
Properties/AssemblyThe HF ceiling light switches the lighting on and off automatical-ly, depending on motion and daylight. Due to its high-frequencytechnology, the integrated sensor reacts to smallest movementsof the moving person even without ‘free visibility’. The HF ceilinglights are mainly suited for interior rooms and, compared withconventional lights, they reduce current consumption and saveon energy costs.
37
The HF Blanco and Deco models
Description Item no Price Euro
HF Blanco with sensor 2735 70.00
60 W-Blanco without sensor 8650 19.50
HF Deco 2734 75.00
Sensor Lights Ceiling and wall lights
36
Side view
Top view
Quick detection with 360° detectionarea regardless of temperature.
Side view
Top view
12 m
12 m
12 m
12 m
12 m
12 m
Your advantages
• HF sensor wall and ceiling light
• Detection of smallest movements of the moving person even without ‘free visibility’
• Pleasant design without visible sensor
• Adjustable time, light value and reach controls
• Switching of the lighting according to requirements; saves current and energy costs
• Ideal in corridors, staircases, vestibules and garages, etc.
Your advantages
• HF sensor wall and ceiling light
• Detection of smallest movements of the moving person even without ‘free visibility’
• Pleasant design without visible sensor
• Adjustable time, light value and reach controls
• Switching of the lighting according to requirements; saves current and energy costs
• Ideal in corridors, staircases, vestibules and garages, etc.
approx. 1000 mW < 1 mW
The HF ceiling lightsends out a signalrequiring less than 1 mW and thus emits1000 times less than a conventional mobilephone! approx. 1000 mW < 1 mW
The HF ceiling lightsends out a signalrequiring less than 1 mW and thus emits1000 times less than a conventional mobilephone!
The HF ceiling light is high-tech with anappealing design, quick response time,and saves energy costs.
The HF ceiling light is high-tech with anappealing design,quick response time,and saves energycosts.
Quick detection with 360° detectionarea regardless of temperature.
Fig. Similar Fig. Similar
HF-Blanco
HF-Deko
120 W3 x 40 W
80 W2 x 40 W
NEW 08
Operating instructions under www.zublin.de
![Page 24: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/24.jpg)
The Cerc Lamp 360 PL and 360 E models
Description Item no Price Euro
Cerc lamp 360 PL white 2710 65.00
Cerc lamp 360 E white 2720 65.00
Ceiling Lights
Cerc Lamp 360 PL and 360 EFlat sensor ceiling lights
Cerc lamp 360 PLNominal voltage: 230 V, 50 HzSwitching capacity: 2 x 9 W (G-23) (excl.)Detection area: 360° max 4 m radiusTwilight controller: 5 - 300 luxTime controller: 20 secs - 10 minsDimensions: 290 mm Ø x 90 mmFor indoor mounting only3 year warranty
Cerc lamp 360 ENominal voltage: 230 V, 50 HzSwitching capacity: max 3 x 40 W (E 14) (300 W) (excl.)Detection area: 360° max 4 m radiusTwilight controller: 5 - 300 luxTime controller: 5 secs - 15 minsDimensions: 300 mm Ø x 130 mmFor indoor mounting only3 year warranty
39
Sensor Lights Ceiling and Wall Lights
38
Cerc Lamp 360PL
Cerc Lamp 360E
Side view
max 8 m
max
8 m Top view
Your advantages
• HF sensor wall and ceiling light
• Detection of smallest movements of the moving person even without ‘free visibility’
• Pleasant design without visible sensor
• Adjustable time, light value and reach controls
• Switching of the lighting according to requirements; saves current and energy costs
• Ideal in corridors, staircases, vestibules and garages, etc.
Your advantages
• Motion detector with 8 m detection area, also applicable outdoors
• Brilliancy 2 x 9 W PL or 3 x 40 W E
• Detection angle 360° with exit angle 110°
• Quick and simple installation
• Also suited for outdoor mounting
Properties/Assembly
The sensor ceiling lights are suited for the lighting controlaccording to requirements, in vestibules, cellars, garages, WCs,etc. The light is reliably switched on, and the follow-up time canbe set via the time controller, and the response threshold via thelux controller. Due to its PL lights, the Cerc Lamp PL is particu-larly suited for rooms in which the light stays switched on for alonger period and where the on/off switching frequencies arenot very high. The Cerc Lamp E is ideal if quick turn-on timesare desired in corridors and halls.
HF Quad 160 W or 80 WHF Quad 160 WNominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E14 (excl.) / 4 x 40 W, E14 (excl.)Detection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 460 mm x 460 mm x 70 mm320 mm x 250 mm x 65 mm3 year warranty
HF SlimNominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E14 (excl.) Detection area: 360° / 12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 600 mm x 130 mm x 95 mm3 year warranty
Properties/AssemblyThe HF ceiling light switches the lighting on and off automati-cally, depending on motion and daylight. Due to its high-fre-quency technology, the integrated sensor reacts to smallestmovements of the moving person even without ‘free visibility’.The HF ceiling lights are mainly suited for interior rooms and,compared with conventional lights, they reduce current con-sumption and save on energy costs.
Quick detection with 360° detectionarea regardless of temperature.
Top view
Quick detection with 360° detectionarea regardless of temperature.
max
12
m
max 12 m
Side view
max 8 m
HF Quad 160 W
HF Quad 80 W
HF Slim
The HF Quad 160 W / 80 W and HF Slim models
Description Item no Price Euro
HF Quad 160 W 2739 150.00
HF Quad 80 W 2738 96.00
HF Slim 2731 90.00
max 12 m
NEW 08
Operating instructions under www.zublin.de
![Page 25: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/25.jpg)
The Post-Tec 200 Cove and Co-Tec 360 models
Description Item no Price Euro
Post-Tec 200 Cove, stainless steel 2547 130.00
Co-Tec 360 opal, stainless steel 2489 110.00
Corner socket, stainless steel 9867 10.00
Stainless Steel Sensor Lights
Post-Tec 200 Cove undCo-Tec 360Modern stainless steel post light with a detection area of 200° and lamp for wall installation with a detection area of 360°.
Post-Tec 200 CoveNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Parallel switching capacity: 1000 W / 250 VADetection area: 200°/8 mReach controller: 3 – 8 m front, 2 – 6 m sideTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 845 mm x 100 mm Ø x 200 mm3 year warranty
Co-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: 360° / 16 m ØTwilight controller: 15 – 2000 luxTime controller: 10 secs - 12 minsProtection class: IP 44 splash-proof Dimensions: 350 mm x 100 mm x 170 mm3 year warranty
IP44
IP44
41
Post-Tec 200 Cove
Co-Tec 360
200°
Sensor Lights Stainless Steel
40
The Globe-Tec 360 clear and opal / Co-Tec 360 opal / Ruby-Tec 360 models
Description Item no Price Euro
Globe-Tec 360 opal, stainless steel 2481 110.00
Globe-Tec 360 clear, stainless steel 2480 110.00
Co-Tec 360 opal, stainless steel 2489 110.00
Ruby-Tec 360 stainless steel 2485 110.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Globe-Tec 360 Clear and OpalPremium stainless steel wall lights with 360° sensor
Globe-Tec 360 clear / opalNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Detection area: 360° / 16 m ØTwilight controller: 15 - 1000 luxTime controller: 10 secs - 12 minsProtection class: IP 44 splash-proof Dimensions: 400 mm x 200 mm x 210 mm3 year warranty
IP44
opal
clear
Co-Tec 360
Ruby-Tec 360
Your advantages
• Setting of time, lux and reach values at the push of a button
• Time, lux and reach controllers also adjustable manually• Stainless steel light with 360°/ 16 m Ø detection area• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting• CE, IP44 for outdoor mounting
Co-Tec 360 / Ruby-Tec 360Premium stainless steel wall lights with 360° sensor
Co-Tec 360 / Ruby-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Detection area: 360° / 16 m ØTwilight controller: 15 - 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions Co-Tec: 350 mm x 100 mm x 170 mmDimensions Ruby-Tec: 420 mm x 100 mm x 170 mm3 year warranty
IP44
Your advantages
Post-Tec 200 Cove
• Massive stainless steel post light with integrated 200° motion detector
• Holiday, time, lux and reach controllers
• Premium stainless steel with robust glass
• Different glasses attachable
• Garden light IP44, splash-proof for outdoor mounting
Co-Tec 360
• The stainless steel sensor light Cove-Tec with 360° / 16 Ø m detection area
• Holiday, time, lux and reach controllers
• Premium stainless steel with robust glass
• Different glasses attachable
• Garden light IP44, splash-proof for outdoor mounting
Side view
Post-Tec
2,5m
approx. 200°/ 8 m
Co-Tec 360Front view
16 m
Side view
2,5m
approx. 200°/ 8 m
Socket for corner installationItem no 9867
Replacement glass for:
Globe-Tec 360 clear Item no 10002Globe-Tec 360 opal Item no 10001Co-Tec 360 opal Item no 10028Ruby-Tec 360 opal Item no 10005
optional optional
1 m
Socket for corner installationItem no 9867Replacement glass for Co-Tec 360 opalItem no 10028
Operating instructions under www.zublin.de
![Page 26: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/26.jpg)
2,5m1 m2,5m1 m
The Post-Tec 200 and Ruby-Tec 200 models
Description Item no Price Euro
Post-Tec 200 Ruby, stainless steel 2545 130.00
Ruby-Tec 200, stainless steel 2205 120.00
Corner socket, stainless steel 9867 10.00
Stainless Steel
Post-Tec 200 Ruby undRuby-Tec 200Premium stainless steel wall and post light with 200° sensor
Post-Tec 200 RubyNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27), 18 W PL, 23 W PLParallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 3 – 8 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 850 mm x 100 mm x 200 mm3 year warranty
Ruby-Tec 200Nominal voltage: 230 V, 50 HzSwitching capacity: 18 W, 23 W PL (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 4 – 12 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof3 year warranty
IP44
IP44
43
Sensor Lights Stainless Steel
42
Post-Tec 200 Ruby
Ruby-Tec 200
The Post-Tec 200 and Ball-Tec 200 models
Description Item no Price Euro
Post-Tec 200 Ball, stainless steel 2540 140.00
Ball-Tec 200, stainless steel 2200 130.00
Corner socket, stainless steel 9867 10.00
Post-Tec 200 Ball undBall-Tec 200Premium stainless steel wall and post light with 200° sensor
Post-Tec 200 BallNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 3 – 8 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 850 mm x 200 mm x 200 mm3 year warranty
Ball-Tec 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 4 – 12 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 480 mm x 200 mm x 240 mm3 year warranty
IP44
IP44 Premium and top quality!4 controllers!
Post-Tec 200 Ball
Ball-Tec 200
Your advantages
Post-Tec 200 Ball• Massive stainless steel post light with integrated
200° motion detector• Time, lux and reach controllers• Additional switching output for connection of further lights• Premium stainless steel with robust glass• Garden light IP44, splash-proof for outdoor mounting
Ball-Tec 200• The stainless steel sensor light Ball-Tec with 200° /
12 m detection area• Massive stainless steel light with adjustable detection area• 4 controllers behind a folding lens holder• Holiday controller for continuous lighting and presence
simulation• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting
Your advantages
Post-Tec 200 Ruby• Massive stainless steel post light with integrated
200° motion detector• Time, lux and reach controllers• Additional switching output for connection of further lights• Premium stainless steel with robust glass• Garden light IP44, splash-proof for outdoor mounting
Ruby-Tec 200• The stainless steel sensor light Ruby-Tec with 200° /
12 m detection area• Massive stainless steel light with adjustable detection area• 4 controllers behind a folding lens holder• Holiday controller for continuous lighting and presence
simulation• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting
Socket for corner installationItem no 9867Replacement glass forPost-Tec 200 RubyItem no 10005Replacement glass forRuby-Tec 200 Item no 10007 (plastics)
Premium and top quality!4 controllers!
200°
Post-Tec 200 BallFront view
Ball-Tec 200Top view
approx. 200°/ 6 m
Side view
200°
Post-Tec 200 RubyFront view
approx. 200°/ 6 m
Side view
Ruby-Tec 200Top view
Socket for corner installationItem no 9867Replacement glass for Post-Tec 200 BallItem no 10008
Operating instructions under www.zublin.de
![Page 27: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/27.jpg)
45
The Kube-Tec 360 and Lan-Tec 360 models
Description Item no Price Euro
Kube-Tec 360 stainless steel 2008 95.00
Lan-Tec 360 stainless steel 2006 95.00
Sensor Lights Stainless Steel
44
Kube-Tec 360 andLan-Tec 360Premium stainless steel wall light with 360° sensor
Kube-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 360°Reach: max 16 m / 6 m – 8 m side,
depending on heightMounting height: approx. 1.8 m – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 350 mm x 230 mm x 110 mm3 year warranty
Lan-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 360°Reach: max 16 m / 6 m – 8 m side,
depending on heightMounting height: approx. 1.8 m – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 350 mm x 220 mm x 100 mm3 year warranty
IP44
IP44
Real 360° detection area with 3 pyrodetectors!
max 16 m
Kube-Tec 360
Lan-Tec 360
Sensor Lights
Your advantages
• Shapely, flat stainless steel lights for outdoors
• Time, lux and reach controllers
• 360° / 8 m detection area, monitoring of 16 m house front possible
• Premium stainless steel with robust glass
• Bulb holder directed upwards; prevents short circuits through illuminants
• Garden light IP44, splash-proof for outdoor mounting
Premium and top quality!Real 360ºdetection area!
The Globe Lamp 200 clear and opal models
Description Item no Price Euro
Globe lamp 200 clear white 2320 65.00
Globe lamp 200 clear black 2310 65.00
Globe lamp 200 opal white 2340 65.00
Globe lamp 200 opal black 2330 65.00
Globe Lamp 200 clear and opalWall sensor light with 200° detection area
Globe lamp 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 WParallel switching capacity: 1000 W / 250 VADetection area: 200° / max 12 mAdjustable: 160° horizontally / 60° verticallyTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 250 mm x 200 mm x 170 mm3 year warranty
IP44
black opal
white clear
Your advantages
• Pivoted and inclinable 200° / 12 m detection area
• Additional clip as lens blind for exact restriction of thedetection area
• Elegant assembly with snap fits
• Time and lux controllers
• Casing made of robust polycarbonate
• Switch-on of the sensor via external break switch possible (2 secs power failure)
• CE, IP44 for indoor and outdoor mounting
With clips for lens cover
200 degree monitoring,adjustable horizontally andvertically. With possibility of parallel connection, additional load up to 1000Watt, pushbutton function.
Globe lamp 200Top view
Replacement glass clear for globe lamp 200 Item no 10002Replacement glass opalfor globe lamp 200 Item no 10001
Operating instructions under www.zublin.de
![Page 28: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/28.jpg)
Post Lights
47
Sensor Post Lights
46
The Aluminium Lantern 200 and Post Lantern 200 models
Description Item no Price Euro
Aluminium lantern 200 white 2220 70.00
Aluminium lantern 200 black 2210 70.00
Post lantern 200 white 2530 95.00
Post lantern 200 black 2535 95.00
Aluminium Lantern 200 andPost Lantern 200Wall post sensor light with 200° detection area
Aluminium lantern 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 200°Reach: max 12 m Mounting height: approx. 1.8 – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 420 mm x190 mm x 200 mm3 year warranty
Post lantern 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 200°Reach: approx. 6 m frontTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 1100 mm x 400 mm x 200 mm3 year warranty IP44
IP44
Premium and top quality!
Post Lantern 200
Aluminium Lantern 200 Your advantages
Aluminium Lantern 200
• Decorative 60 W lantern black or white
• Pivoted and inclinable 200°/ 12 m detection area
• Additional clip as lens blind for exact restriction of the detection area
• Simple assembly with external screws
• Time and lux controllers
• Timer activation via external break switch possible (power failure)
• Casing made of robust aluminium, sensor of polycarbonate
• CE, IP44 for indoor and outdoor mounting
Post Lantern 200
• Massive post light with 200° motion detector
• Time, lux and reach controllers
• Additional switching output for the connection of further lights
• Timer activation via external break switch possible (power failure)
• Robust aluminium with glass
• Decorative
• Casing made of robust aluminium, sensor of polycarbonate
• Garden light IP44, splash-proof for outdoor mounting
The Garden Ruby and Garden DC 180 models
Description Item no Price Euro
Garden Ruby white 2620 90.00
Garden Ruby black 2610 90.00
Garden DC 180 white 2520 90.00
Garden DC 180 black 2510 90.00
Garden Ruby undGarden DC 180Garden lights with 200° detection area
Garden RubyNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Adjustable: approx. 2 – 6 m frontTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 900 mm x 200 mm x 100 mm3 year warranty
Garden DC 180Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Adjustable: approx. 2 – 6 m frontTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 900 mm x 200 mm x 200 mm3 year warranty IP44
IP44
Garden DC 180
Garden Ruby
Your advantages
• Massive and decorative post light with integrated motion detector
• Detection area approx. 200°/6 m
• Time, lux and reach controllers
• Timer activation via external break switch possible (power failure)
• Additional switching output for connection of further lights
• Robust aluminium with glass
• Garden light IP44, splash-proof for outdoor mounting
200°
Garden DC 180Garden Ruby
Side view
2,5m1 m
approx. 200°/ 6 m
With clips for lens cover
200 degree monitoring,adjustable horizontally andvertically. With possibility of parallel connection, additional load up to 1000Watt, pushbutton function.
Alu lantern 200Top view
Replacement glass for RubyItem no 10005Replacement glass for Garden Item no 10050
Operating instructions under www.zublin.de
![Page 29: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/29.jpg)
2,5m1,8 m
Sensor Lights
49
Sensor Post Floodlight
48
The Sensor Floodlight 500/200, 500 W with Stand model
Description Item no Price Euro
Sensor floodlight 500 W with stand 1270 60.00
Sensor Floodlight 500 W with Stand and180° Motion DetectorSensor floodlightNominal voltage: 230 V, 50 HzSwitching capacity: 150 W (400 W) (halogen)Detection area: approx. 180° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 125 mm x 1200 mm to 1800 mmHalogen lamp: 500 W (incl.)3 year warranty
Mobile Automatic Light
The mobile automatic light is ideal for building sites, garages,crafting rooms or in gardens. It switches the light on automati-cally on dangerous steps or building sites and can be applied inthe next place after finishing work. This is safety made flexible.
Your advantages
• 500 W sensor floodlight with large detection area
• Reach approx. 12 m, detection angle 180°
• Time, light and reach controllers
• Adjustable height, 1.2 m – 1.8 m
• Waterproof IP54
180
approx. 180°/ 12 m
Side view
The Bulpir BH-1 and Bulpir BH-2 models
Description Item no Price Euro
Bulpir BH-1 white 2020 30.00
Bulpir BH-1 black 2010 30.00
Bulpir BH-2 black 2030 30.00
Bulpir BH-1 und Bulpir BH-2Wall lights with 110° detection area
Bulpir BH-1Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 110° / 7 mAdjustable: 160° horizontallyMounting height: between 1.5 m and 2.5 m on the wallTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsDimensions: 250 mm x 110 mm x 110 mm3 year warranty
Bulpir BH-2 with dimmer functionNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 110° / 7 mAdjustable: 160° horizontallyMounting height: between 1.5 m and 2.5 mBase light: 15 W (fixed as from twilight)Twilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsDimensions: 250 mm x 110 mm x 110 mm3 year warranty
IP44
IP44
Bulpir BH-1
Bulpir BH-2
Your advantages Bulpir BH-1
• 60 W sensor lights with pivoted 110°/7 m detection area
• BH-1 available in black and white, BH-2 in black
• Time and lux controllers
• For 60 W and max 75 W bulb
• CE, IP44 for indoor and outdoor mounting
BH-2 with dimmer function!
• 60 W sensor light with pivoted 110°/7 m detection area, standlight approx. 15 W, full light output approx. 60 W
• With continuous lighting for orientation from twilight
• Suitable as house number light, numbers available
• Max 75 W bulb applicable
• CE, IP44 for indoor and outdoor mounting
12With dimmerfunction!
ca. 110˚ /12m
2,5m ca. 60˚
approx. 110°/ 7 m
Bulpir BH-1
Bulpir BH-2
IP54
Operating instructions under www.zublin.de
![Page 30: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/30.jpg)
Sensor Floodlight
51
The Pro 500/3000 IR and Pro 150/3000 IR models
Description Item no Price Euro
Pro 500/3000 IR black 1285 140.00
Pro 500/3000 IR white 1280 140.00
Pro 150/3000 IR black 1295 130.00
Pro 150/3000 IR white 1290 130.00
PIR hand-held transmitter 25320 20.00
Mini hand-held transmitter 25310 15.00
Your advantages
• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter
• Optional mini hand-held transmitter On/Off/Automatic• Flat installation on a cover plate or wall installation on an
exposed socket• Detection 180° horizontally, 90° vertically, mounting at
1– 5 m height• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• ON/OFF/AUTO and holiday function etc. via PIR hand-held
transmitter• New high-performance relay• Special robust floodlight
Accessories optional
Mini hand-held transmitterAUTO: sensor function
ON: light ON for 6 hours *
OFF: light OFF for 6 hours *
* then back again to sensor functionItem no 25310
Sending of the set parameters
Cursor for selecting the parameters
Storage of the selected parameters
Playing back the set parameters
Trial run
Setting of the pause time between 2 pulses
Holiday programs
Deactivation of the key function Item no 25320 see p.4
PIR hand-held transmitter
Side view
Top view
Front approach = not sensitive (distance–50%)
Sidewise approach = sensitive
200° horizontally + 360° creep zone protection
NEW 08
Pro 500/3000 IR +Pro 150/3000 IRRemote controllable sensor floodlights
Nominal voltage: 230 V / 50 HzSwitching capacity: 500 + 1800 Watt / 10A ohmic (cos ϕ 1,0)
150 + 2150 Watt / 10A ohmic (cos ϕ 1,0)Detection area: 200° horizontally + 360° creep zone protectionMounting height: approx. 2m – 5 mReach: approx.14 m front and approx. 7 m sidewise,
Ø 5m creep zone protectionTwilight controller: 5 – 2000 LuxTime controller: short duration pulse or 10 secs to 12 minsProtection class: IP 54 Splash-proof / class IITemperature range: -30° C to + 50° CDimensions 500/3000: 215 mm x 270 mm x 140 mmDimensions 150/3000: 140 mm x 175 mm x 115 mm3 year warranty
Properties/Assembly
The sensor floodlights are installed at a height of 2–5 m. Settings are done via the PIR hand-held transmitter and switch-on /switch-off can also be carried out with the mini hand-held transmitter!
CLICK !The Swiss Garde 3000 IR is simplyclicked onto the floodlight!
Click !
IIPP5544
Pro 150/3000 IR
Pro 500/3000 IR
The Homelite model
Description Item no Price Euro
Homelite white 2060 35.00
Homelite black 2050 35.00
HomeliteWall light with 90° detection area
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 90° / max 8 mAdjustable: fixedMounting height: approx. 1 – 2 mTwilight controller: 10 – 300 luxTime controller: 20 secs - 10 minsDimensions: 250 mm x 100 mm x 100 mm3 year warranty
IP44
Sensor Lights
50
Your advantages
• 60 W sensor lights with approx. 90°/ 8 m detection area
• Available white or black
• Time and lux controllers
• Simple and quick assembly
• CE, IP44 for indoor and outdoor mounting
ca. 90˚ /12m
2m
90°
approx. 90°/ 8 m
Operating instructions under www.zublin.de
![Page 31: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/31.jpg)
Sensor Floodlight
52
500 W
Floodlights and LightsFloodlights and Lights without sensor
1. Extensive frame for
maximum cooling
2. Stainless steel screws for
optimum weather resistance
3. Premium illuminant for
long life
1
2
3
Twilight Switch PC 24With Integrated TimerNominal voltage: 220 / 240 V ACSwitching capacity: 2000 W / 10 A Twilight controller: approx. 5 – 300 luxDead time on/off: approx. 60 secsDead time: 2, 4, 6, 8 hrs, or twilightDimensions: 74 mm x 95 mm x 45 mmTemperature range: -30 to +50 °C3 year warranty
Item no 7520
60 W-BlancoSwitchable in Parallel
with HF Blanco !
150 W
The Pro 500/ 140 / Pro 150/180 models
Description Item no Price Euro
Pro 500/140 white 9812 18.00
Pro 500/140 black 9810 18.00
Pro 150/180 white 1265 15.00
Pro 150/180 black 1255 15.00
Pro 500/140 / Pro 150/180Sensor Floodlight with 140°+180° Detection Area
Pro 500/140Nominal voltage: 230 V, 50 HzSwitching capacity: 500 W (900 W) Detection area: approx. 140° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsHalogen lamp: 500 W incl.Dimensions: 200 mm x 270 mm x 200 mm3 year warranty
Pro 150/180Nominal voltage: 230 V, 50 HzSwitching capacity: 150 W (400 W) Detection area: approx. 180° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsHalogen lamp: 150 W incl.Dimensions: 125 mm x 170 mm x 100 mm3 year warranty
IP54
IP54
Pro 150/180
Your advantages
• Competitive sensor floodlight
• Pivoted and inclinable 140°+180° / 12 m detection area (6 m each side)
• Time and lux controllers
• Casing of sensor made of polycarbonate
• CE, IP44 for outdoor mounting
Pro 500/140
180
Pro 500/140 Pro 150/180
2,5m
approx. 180°/ 12 m
Side view
approx. 140°/ 12 m
Side view
NEW 08
Operating instructions under www.zublin.de
![Page 32: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/32.jpg)
Lights and Floodlights without Sensor
54
Description Item no Price Euro Replacement glass
Floodlight 1000 W white 9083 30.00
Floodlight 1000 W black 9082 30.00
Floodlight 500 W white 8060P 20.00
Floodlight 500 W black 8050P 20.00
Floodlight 300 W white 8520 15.00
SFloodlight 300 W black 8510 15.00
Floodlight 150 W white 8120P 15.00
Floodlight 150 W black 8110P 15.00
Floodlight 500 W portable 8210 12.00
Floodlight 150 W portable 8310 10.00
Floodlight 500 W stand 8420 30.00
Post Ball post light 8972 100.00 10008
Post Ruby post light 8982 100.00 10005
Socket for corner installation 9867 10.00
Garden Light 90 globe clear, white 8920 70.00 10050
Garden Light 90 globe clear, black 8910 70.00 10050
Garden Light 90 Ruby, white 8960 80.00 10005
GGarden Light 90 Ruby, black 8950 80.00 10005
Globe-Tec 8775 45.00 10002
Ruby-Tec 8770 45.00 10005
Longlite white 8620 10.00
Longlite black 8610 10.00
60 W-Blanco 8650 19.50
Floodlight 300 Watt
Nominal voltage: 230 V, 50 HzSwitching capacity: 300 W Protection class: IP 23Halogen lamp: 300 W (incl.)Dimensions: 170 x 215 x 60 mm3 year warranty
Floodlight 150 Watt
Nominal voltage: 230 V, 50 HzSwitching capacity: 150 W Protection class: IP 44Halogen lamp: 150 W (incl.)Dimensions: 125 x 120 x 85 mm3 year warranty
Floodlight 1000 Watt
Nominal voltage: 230 V, 50 HzSwitching capacity: 1000 W Protection class: IP 44Halogen lamp: 1000 W (incl.)Dimensions: 280 x 190 x 160 mm3 year warranty
Floodlight 500 W / 150 W portable
Nominal voltage: 230 V, 50 HzSwitching capacity: 500 W / 150 W Protection class: IP 44Cable: H05.-RNF approx. 2 mHalogen lamp: 500 W / 150 W (incl.)3 year warranty
Floodlight 500 W stand
Nominal voltage: 230 V, 50 HzSwitching capacity: 500 WProtection class: IP 44Height: 1.2 – 1.8 mCable: H05.-RNF approx. 2 mHalogen lamp: 500 W (incl.)3 year warranty
Floodlight 500 Watt
Nominal voltage: 230 V, 50 HzSwitching capacity: 500 W Protection class: IP 44Halogen lamp: 500 W (incl.)Dimensions: 185 x 150 x 125 mm3 year warranty
Garden Light
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: approx. 900 x 200 x 200 / 100 mm3 year warranty
Post Lamp Ball+Ruby
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 850 x 200 x 200 / 100 mm3 year warranty
Longlite
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 250 x 100 x 100 mm3 year warranty
Ruby-Tec
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27), 18 W, 23 W PLProtection class: IP 44Dimensions: 480 x 100 x 210 mm3 year warranty
Socket for corner installation for Globe-Tec, Ruby-Tec and various lights with sensor
IP54
IP54
IP54
IP54
IP54
IP44
IP44
IP54
IP44
IP44
Socket for corner installation for Globe-Tec, Ruby-Tec and various lights with sensor
60 W-Blanco
Nominal voltage: 230 V - 50 HzIlluminant: 60 W E27 (excl.)Protection class: IP20, Klasse II, CEDimensions: 300 mm Ø x 100 mm3 year warranty
IP20
IP44
NEW 08
NEW 08
Operating instructions under www.zublin.de
Globe-Tec
Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 480 x 200 x 220 mm3 year warranty
![Page 33: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/33.jpg)
Installation examples Page
Installation examples 2 + 3: garages and multi-storey car parks 56
Installation examples 4 + 5: wet rooms and toilets 57
Installation example 6: corridors and halls 58
Installation example 7: staircases 59
Installation example 8: warehouses 60
Installation example 9: schoolrooms 61
Installation Swiss Garde MZ 5000: interactivity 62
Installation examples 10 + 11: multi-storey car park / warehouse with MZ 5000 63
MiscellaneousHigh-performance relay for electronic control gears, FL and PL lamps 64
Short duration pulse function 64
Assembly of presence and motion detectors 65
Disturbance sources and trouble shooting 66
Accessories 67
Connection diagrams 68–69
Table of contents
55
![Page 34: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/34.jpg)
56 57
Garages and multi-storey car parksDue to the lighting in garages and multi-storey car parks beingnecessary only temporarily and in certain areas, the savings potential is particularly high. Please note for your planning: Avoidinstallation of the motion detectors directy above the vehiclebonnet. The engine heat can lead to small turbulences whichcould trigger a switching pulse in the motion detector.2. The entrances and the staircase and lift accesses should belocated within a close-up range of the sensor. We recommendthis to be within a 5 m range. The Swiss Garde Premium is ideal for monitoring larger surfaces,such as in multi-storey car parks, etc. Position the motion detec-tor in a way so as not to allow persons or cars to approach it directly. This would otherwise lead to a decrease of the reach.If more than 4 detectors are switched in parallel, we recommendto use the short duration pulse function model which is providedwith a time switch.On using the Swiss Garde 360 Premium we recommend, if everpossible, to monitor the car park area within a 12 m detectionarea, as sometimes only small movements occur in there over alonger period. Within the cruising range, the distance to the nextmotion detector can well even be 16 m!
Installation examples 4 + 5 Swiss GardeInstallation examples 2 + 3 Swiss Garde
ToilettenIn wet rooms and toilets little light is used.The current saving potential is therefore particularly great.Please note: The entry must be located within the closer-updetection area of the motion detector.Avoid any mirrors within the closer-up detection area of thesensor. This could lead to disturbances in conjunction with the lighting. If this is the case, cover the respective lens partwith a blind.Ventilators close to the motion detectors can lead to draught leading in turn to an undesired switch-on of the light. Place thedevice within sufficient distance from the ventilator and insertthe gasket for concealed installations.Make sure that the toilet cubicles are located within the detec-tion area also. For this, ceiling motion detectors would be high-ly recommended.
Lux measurement test (rooms with windows)In various light measurements at the ceiling, approx. 20 luxwere measured for dark or black floors, respectively, and ap-prox. 50 lux for white floors, all against the same natural expo-sure to light. Set the twilight controller to the minimum of 5 – 10lux for white floors!
SG 360 Concealed Plus
SG 360 Concealed Plus KI
approx. 7.5 m
appro
x. 4 m
Cerc Lamp
SG 360 Concealed Plus
SG 360 Concealed Plus KI
SG 360 Concealed Plus
SG 360 Concealed Plus KI
1 2 3 4 5 6 7 89
SG 360 PremiumSG 360 Premium
SG 360
Plus KI
approx. 21 m
approx. 10 m
Installation example 3
Installation example 2:
Swiss Garde 360 Premium Installation example 5
Swiss Garde 360 Concealed Plus
Installation example 2: car parkIn order to make the largest possible saving on current, care should be taken in big lighting installations not to connect all lights in parallel.Often enough it is sufficient to switch on a smaller lighting group, as only part of the area is driven in or passed.
In the present case 4 lighting groups were provided for.
Given that each arriving or departing vehicle passes the drives, a small lighting group with a Swiss Garde 360 Premium (max 30 m diameter)was installed, which is switched on permanently. In this case only the left-hand or the right-hand car park half is often used. For this reason3 further lighting groups of Swiss Garde 360 Premiums were provided for, of which one is on the left and the other one on the right. Thestaircase and lift accesses are within a close-up range.
Installation example 5: wet roomsMake sure that free visibility of the motion detector is provided for in wet rooms. The detection applied here above the partition wall crossesis only applicable if the toilet cubicles are not entirely secluded by the partition walls (height of the partition walls up to 2 m max).
In individual secluded cubicles, Swiss Garde 360 Plus or 180 Concealed can be used. Set the follow-up time at the motion detector to atleast 5 – 10 mins, as over certain periods there is only little movement. The movements to be detected in this case are all within close rangeof the motion detector.
appr
ox. 4
m
approx. 7.5 m
Installation example 3:Swiss Garde 360 Premium
2 x Swiss Garde 360 Premium @ Euro 98.–
Total: 196.00 net
Detection area up to 30 m! Switching capacity 3000 W
SG 360 Concealed Plus
SG 360 Concealed Plus KI
approx. 4.2 m
appro
x. 3 m
SG 360 Concealed Plus
SG 360 Concealed Plus KI
Installationsbeispiel 4
Installation example 4:Swiss Garde 360 Plus
2 x Swiss Garde 360 Plus @ Euro 80.00
Total: 160.00
Operating instructions under www.zublin.de
![Page 35: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/35.jpg)
Installation indoor stadium
At the new indoor stadium, a total of 620 copies of Swiss Garde Presence and 150 copies of Swiss Garde 360 Premium have been installed.
The presence detectors have mainly been installed in lounges and also in rooms with a need for heating and ventilation, while the 360 degree ceiling detectors control the lighting in the corridors.
ca. 2.5 m
ca. 7.2 m
with safety guard with safety guard
T30
Office 16m 2Y30-E-47
30-E-45ELEVATOR
483.50 MuM
TR. KERN 4
30-E-43A
R30 best newly actuatedMotion detector on both sides, possibly in hollow ceiling as well
.
EWI
RECEPTION
30-E-39
OFFICE
30-E-39D
30-E-41
30-E-39C
SECRETARIATE
WINDF.
FLP
F30
INV.30-E-35C
WC H30-E-35A
30-E-31A
CLOAKROOM 75
WC D30-E-37A
T30
CORR
IDO
R
30-E
-39A
30-E
-37B
WC
D.
30-E
-35B
WC
H.
GATE
STORAGE ROOM
30-E-37C
Disabled persons’ shower
Disabled persons’ shower
30-E-23B30-E-27B
VESTIBULEVESTIBULE
30-E-101CORRIDOR
30-E-19A
30-E-19C
SHOWER
CLOAKROOM 75
SHOWER
30-E-23C
30-E-23A
CLOAKROOM 75
30-E-31B
VESTIBULE
30-E-31C
SHOWER
30-E-27C
SHOWER
30-E-27A
CLOAKROOM 75
30-E-32
INDOOR DEVICES THEORY
30-E-20A30-E-22
JANITORIAL ROOM
R30 best newly actuatedMotion detector on both sides, possibly in hollow ceiling as well
30-E-19B
VESTIBULE
SG 360 UP Plus
SG 360 WM
SG 360 UP Premium SG 360 UP Premium
48.5 m
20.0
m
5.0m
5.0m 10.0m 15.0m
Swiss Garde 360 Premium Concealed Swiss Garde 360 Plus
Swiss Garde 360 Wall Installation
Installation example 7 Swiss Garde
59
Installation example 6 Swiss Garde
58
Corridors and hallsCorridors and halls are transit places in which the operation ofthe light is often forgotten about. The saving potential is there-fore great. Please note: Entries and exits and also lift and staircases accesses must belocated within close range. For long corridors without doors onthe sides a detection gap in between would do no harm.Front detection in case of direct approach reduces the reach byover 50 %. If ever possible, allow for the sensor to be shiftedsideways to the walking direction.For larger installations we recommend the application of theshort duration pulse function or the switching of several groupswith max 4 motion detectors in parallel.
Halls and corridors
Please note: In halls and corridors of over 12 m length we rec-ommend to apply a motion detector at the beginning and at theend of the corridor.Such installation proves itself better than a motion detector inthe middle, particularly if any doors lead into the corridor at thebeginning and at the end.Use a Swiss Garde MZ 2000 above the door at the corridor beginning and end, or a Swiss Garde 360 Wall Installation Con-cealed for perfect elegance. In this, make sure that the motiondetector is provided for in the middle above the door or, evenbetter, at the opening side above the door, and never at the sideof the door hinge!
Installation example 6Use a Swiss Garde 360 Premium Concealed for 1b, c and 1d.These ceiling motion detectors can be installed concealed or ex-posed, and they are in this case combined with a Swiss Garde180 Concealed for wall installation at a height of the manual con-trol switch for 1a.
With the wall switch, you can keep as an option in special casesto switch the light on or off entirely with the manual controlswitch of the Swiss Garde 180 Concealed.The manual control switch of the Swiss Garde 180 Concealedcan be locked and, according to requirements, be made to beoperated by certain persons only.
Motion detector at the height of the manual control switch
As detection at the height of the manual control switch is basical-ly weaker, we recommend to provide for an additional concealeddetector every 8 m in a long corridor, as lateral detection is re-duced every time to approx. 4 m in case of direct approach.
Installation example 6:
2 x Swiss Garde 360 Premium Concealed @ Euro 98.00
1 x Swiss Garde 360 Plus @ Euro 80.00
Total: 276.00 net
StaircasesLighting control in staircases is mostly effected via an externaltime relay. For optimum control of the time relay we recommendto use the short duration pulse function. Please note:The entries to the staircase must be within close range (within 5m) of the detector. In case of several floors we recommend toswitch in parallel max 2 floors with 4 motion detectors.In staircases, wall or ceiling detectors can be used. As there arenumerous and quick movements, a concealed detector at theheight of the pushbutton before the entry or exit, respectively, ofthe stairs will be sufficient in most cases.Due to the difference in height, ceiling motion detectors, such asthe Swiss Garde 360 Premium, are suited for large staircaseswith mezzanines.
Installation example 7:
Swiss Garde 360 Wall Installation
Swiss Garde 360 Premium
2 x Swiss Garde 360 Wall Installation @ Euro 80.00
2 x Swiss Garde 360 Premium @ Euro 98.00
Total: 356.00
Installation example 7
1c.
ca. 7.2 m
ca. 1
0.8
m
Swiss Garde 180 WM
Swiss Garde 180 WM
Swiss Garde 360 Premium
Swiss Garde 360 Premium
Operating instructions under www.zublin.de
![Page 36: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/36.jpg)
Installation example 9 Swiss Garde
61
Installation example 8 Swiss Garde
60
Warehouses and high rack warehousesIn warehouses, detection between the storage racks or thestored products is primarily solved by a device with a small de-tection angle or detection at one level. For wall installation, werecommend to apply the Infra Garde 140° Plus or the SwissGarde MZ 2000 with a mono lens.
In case a solution with ceiling installation is desired, the maxi-mum mounting height should not exceed 6 m, as otherwise toomany detection gaps might occur. For this, we recommend touse the Swiss Garde 360 Premium with a large 30 m detectionarea, or the Swiss Garde MZ 2000 with mono lens.
Set up different lighting groups with one connection in parallel,as often the light in parts of the warehouse is used not at all oronly a little. With the new Swiss Garde MZ 5000 you can switchin parallel different lighting groups flexibly and thus achieve opti-mum saving of energy savings! (see p. 78)
In small and not very clearly arranged warehouses we recom-mend an HF motion detector. It also watches ‘around the cornerand switches the light on if free visibility is obstructed by manystored products.
Installations example 8:
4 x Swiss Garde MZ 5000 @ Euro 130.002 x Bidi Module @ Euro 25.00
1 x Swiss Garde 360 Premium Euro 98.001 x Swiss Garde 360 Premium Concealed @ Euro 98.00
Total: 766.00
SchoolroomsIn order to detect the small movements produced by sitting per-sons in schoolrooms, presence detectors are used exclusively. Toachieve optimum energy saving, the Swiss Garde 360 Presencecan be set to fully automatic. In this, the light must be operatedvia the On/Off manual switch as usual. The light will, however, beswitched off if someone forgets to switch it off by hand.
The Swiss Garde 360 Presence as a ‘fully automatic machine’switches the light on automatically in case there is not enoughnatural light available. The fully automatic machine can also beactivated manually via the R-terminal with a make contact switch.After that, the set follow-up time at the presence detector expiresand the light is switched off in case there is no more movementaround.
According to requirements, the Swiss Garde 360 Presence Mini orthe Infra Garde 360 Presence (Exposed) can also be applied.
Installation example 9:
3 x Swiss Garde 360 Presence @ Euro 125.00
Total: 375.00
Swiss Garde 360 PlusItem no 25000
Swiss Garde 360 PremiumItem no 25050
Swiss Garde 360 Premium Concealed
Item no 25060
Swiss Garde 360Presence MiniItem no 2548
Infra Garde360 PresenceItem no 3505
Swiss Garde360 PresenceItem no 2507
2 x Swiss Garde MZ 5000 + Bidi module
= bidirectional and interactive
SG 360 Premium Concealed
SG 360 Premium Concealed
SG MZ 5000+ Bidi module
SG MZ 5000+ Bidi module
SG MZ 5000
SG MZ 5000
SG 360 Presence
SG 360 Presence
SG 360 Presence
Presence detector pp. 6-8
(pp. 9-12)
(pp. 13-15)
Swiss Garde MZ 5000 white Item no 26350Bidi module (aerial model) white Item no 26800
Operating instructions under www.zublin.de
![Page 37: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/37.jpg)
Only coupled devices (with 64k possibilies of coded transmitters)can switch on a receiver. If equipped with the bidi module, twoareas that are independent of the fuse groups, can (subsequently)be interconnected.
Installation Swiss Garde MZ5000 Swiss Garde Swiss Garde
62 63
Swiss Garde MZ 5000 BidirectionalThe Swiss Garde MZ 5000 can be extended with a few handmovements by means of the bidirectional function. Remove thecartridge at the back of the sensor head and insert in its place thebidirectional cartridge (with aerial).
(Un-) Installation of a bidi module
Disconnect the detector from the mains before installation. Gently push the locking plate (e.g. with a screw driver) and pullout the cartridge from the detector downwards. Then insert thebidi module from below into the detector until it engages in thesnap fit.
After that your MZ 5000 Bidirec-tional is ready for programming.Press successively the program-ming key at the bidi module andthe one at the control pad (or at another motion detector), then the bidirectional couple is in pro-gramming mode for 5 minutes.
As soon as the MZ 5000 with bidi module and the control padhave each received a signal fromthe counterpart, the couple is initialised. During these 5 minutesprogramming mode, press addi-tionally e.g. the ‘Auto’ key on thecontrol pad and activate the motion detector by stepping intothe detection area.
4 channels are available for coupling, which allow you to link a maximum of 5 devices between themselves via radio.
Upon each command received by the CP, the detectors sendsback an acknowledgement sign (indicated acoustically or optically on the CP).
Bidi moduleProgramming key
Each detector can redirectthe command of its motiondetection to a maximum of4 devices.A repeater function is, however, not possible!
Please note: ensure each time a distance of at least 2 m approxi-mately between radio,transmitter and recei-ver units.
World Novelty:Swiss Garde MZ5000bidirectional + interactive
Swiss Garde MZ 5000 InteractivityThe interactivity between 2 Swiss Garde motion detectors allowswireless connection in parallel even across different fuse groups.
To produce the interactivity, both MZ 5000s must be equipped witha bidi module. After connection of the motion detectors to the 230V mains supply, press the programming keys of the bidi moduleapplied. After that the programming time of 5 minutes will start,during which the two MZ 5000s can be coupled. For the coupling,each one of the two detectors requires a signal from its counter-part, which is done by the detector being switched on (the light be-ing switched on). To this end, activate the respective detector bystepping into the detection area. Switching on the relay effects thebidi module applied sending its specific signal to the other detec-tor, which also works as initialisation.
One-sided initialisation
If activation of both detectors has been carried out, both detectorswill also be switched in parallel, that is, they switch each other on if a movement is detected.If required, a one-sided initialisation can also be effected, so thatonly one of the two motion detectors can switch on the other de-tector. To this end, activate only one of the detectors during the 5 minute programming time by stepping into the detection area,and make sure the second detector cannot send a signal to thefirst one.The first MZ 5000 can now switch one the second one automati-cally, if, however, a person steps into the detection area with thesecond MZ 5000, the first detector will not be switched off.
Wireless and flexible connection in parallel
The light in warehouses, workshops or garages can be controlledoptimally with the flexible interactivity between 2 Swiss Garde MZ5000s.Depending on circumstances, little frequented areas can be pro-vided with separate lighting group to allow this to be switched on ifrequired, while the light in the more frequented area is controlledby several MZ 5000s switched in parallel.In this, the connection in parallel is flexible and can be adjusted ifthe warehouse contents are rearranged. If later on all lights are tobe switched on, the new combination can be set up in a few min-utes. approx. 1000 mW < 1 mW/1Sek
The Swiss Garde MZ 5000 sendsout a signal during a second, that only requires 1 mW. A con-ventional mobile phone emitsabout 1000 times more over thesame time!
By switching off the transmitting function of the bidi module, one-way communication is possible as well, e.g., first detector within theout-side area, second detector in the office. The light in the office is also switched on automatically if someone steps into the detectionarea outside. If the monitored area is stepped into in the office, only the light in the office will be switched on.
The maximum reach is 100 m in the fields. The reach is damped downdepending on local circumstances (such as an interior, depending onbrickwork or ceiling).
SG MZ 5000+ Bidi module
SG MZ 5000+ Bidi module
Multi-storey car parkOne-sided connection in parallel:The first detector can switch on the second detector through one-sided initialisation, but not the other way round.
Two-sided interactivity:Connection in parallel in a conventional way; in case of movementwithin the detection area, the ‘coupled’ device, along with the direct-ly connected lights, is activated as well! Activation is effected bothways.
WarehouseDifferent groups can be connected wirelessly in parallel via theinteractivity, this across different fuse groups.In this, the connection in parallel is flexible and can be effected one-sidedly or two-sidedly! 4 Swiss Garde MZ 5000s with bidi module can be connected wirelessly in parallel. Each one of the 4 detectors can additionally be connected in parallel with furtherdetectors in a conventional way.
Installation examples 10 + 11
Operating instructions under www.zublin.de
![Page 38: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/38.jpg)
65
Short duration pulse …Technology by ZüblinThe short duration pulse models by Züblin were specially devel-oped to control larger lighting groups via an external time relay(staircase switch or time switch). These devices replace conven-tional illuminated buttons or can be freely combined with thesame.
The use of short duration pulse models has many advan-tages: The relay of the motion detector is being preserved.
In rooms with many movements over longer periods, the relay of the motion detector is activated over many hours. Incase of larger lightings (e.g. many fluorescent lights with highswitch-on current) the heavy load on the relay can shorten itslife. This is not the case with the short duration pulse function.Here, the relay is loaded only every 20 or 60 seconds duringthe short duration period of approx. 1 second, and the life ofthe relay is thus multiplicated.
Retrofitting of well proven installations with a time relay(staircase switch) and illuminated buttons. In anterooms, corridors and staircases, the lighting control via time relay andpushbuttons has proved itself for many years.The combination of pushbuttons with short duration pulse motion detectors has proved itself in an outstanding manner.The switches can be connected in any order in parallel and can be connected to the same time relay (staircase switch,time switch).However, we recommend to connect in parallel only a maxi-mum of 6 Swiss Garde short duration pulses.
Continuous currents harm time relays and time switches.We therefore strongly recommend not to connect any motiondetectors with long follow-up time to the time relay directly.Should this still be necessary, the switched phase of the mo-tion detector should be connected at the output of the timeswitch!With the Swiss Garde and the adjustable pause time, largerlighting controls can be provided optimally through time switch-es or time relays: switching noises are reduced to a minimumand the life of the relay is increased to a maximum!
Disturbance Sources
Control of a time relay via a pulse generator
With a pulse generator, it is possible to connect a standardmotion detector to a time relay. In this, the desired phase andneutral conductor are connected to the pulse relay. In case of activation of the switched phase for the set time, the poten-tial-free contact is closed for approx. 0.3 – 0.8 secs. After apause time of approx. 50 secs, a further pulse is released untilthere is no person left within the detection area of the sensor.Standard motion detectors can be connected to a short dura-tion pulse generator in parallel without any problems. If requi-red, motion detectors with short duration pulse can also beconnected to the output of the generator additionally. Fixed pulse duration=0.3 secs
Pause length selectable from 5 to 50 secs
220V
0VShort dura-tion pulse
Push-button
Machine Light
Connection to staircase switches
Short Duration Pulse
64
InstallationInstallation at a height of 2.5 m
The mounting height of 2.5 m is optimalfor a motion detector within the outsidearea. The metered values indicated wererecorded at an ambient temperature of20 °C against side approach.
Installation instructions
1. The motion detector must be mounted to a fixed wall, as anymovement of the motion detector itself has the same effect as a heat movement within the monitored area.
2. On determining the place and themounting height, the distance from thestreet and neighbouring lots, etc., shouldbe taken into account in order to avoid any unwanted parasitic couplings.(Reaches for trains/trucks up to 50 m!)
3. Installation sideways of the walking direction ensures the safest functon.In case of direct approach, the reach is
partly reduced considerably (to 5 m). As infra-red rays cannotpermeate firm objects, free visibility of the motion detectorshould be ensured.
4. All passive infra-red motion detectors react to rapid changesof the locally present temperature beams.For example, moving raindrops on the lens can deflect the temperature beams, disturb the local conditions and trigger aconnection. All motion detectors should therefore be installed, if ever possible, with a protection against rain, wind and directsolar radiation on installation in order to prevent undesired connections.The casing of the motion detector is, however, sufficientlysplash-proof to allow for the device to be mounted without protection against rain.
2,5 m
Short duration pulse generatorConventional motion detectors can be connected to a time relayvia a short duration pulse generator. Several standard motion de-tectors can be connected in parallel to a pulse generator.
RecommendationWe recommend to connect in parallel only a maximum of 3 – 4motion detectors. From a technical point of view it is perfectlypossible to switch in parallel up to 10 motion detectors or more.In this, however, parasitic couplings, such as high switch-on currents, interferences, etc, are summed up, and in case of mal-function of one or more motion detectors, trouble shooting be-comes very time-consuming. In case of a small and clear swit-ching, the cause is found out quickly.
Activation of Electronic Con-trol Gears, FL and PL LightsElectronic control gears, FL and PL lights generate high inrushcurrents which shorten the lives of the relays integrated withinthe motion detectors. For this reason Züblin applies a specialhigh-performance relay in the Swiss Garde models which carriesout many switchings in spite of high inrush currents. The relaywhich is certified as per EU standards, performs more than40,000 switchings, if you follow our recommendations.
Maximum switching capacity / Nominal voltage:Light bulbs and halogen lamps max 2300 W1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x 18 W), 15 x (2x 36 W) or 10 x (2 x 58 W) max
5. Between the motion detector and the connected lighting, aminimum distance of 1.5 m must not be gone below. Lights with-in the sensor area could otherwise trigger the pulse for renewedswitch-on after switch-off due to the change of heat. Emittersmust not be directed straight towards the motion detector. Extra-neous light can impair the functioning (e.g. twilight sensor).
6. The reach can be influenced by rotating and pivoting the sen-sor part or through partial cover of the lens with the blind. Ifmains parallel inductances, such as relays, air gap switches, flu-orescent lamps or transformers are switched, the application ofan RC quenching circuit (item no 33260) is recommended in par-allel with the consumer load. Parallel inductances can generateovervoltages on switch-off in the region of 3,000 – 4,000 V.
7. After installation the setting controllers must always pointdownwards, as otherwise the detection is directed upwards.Lateral detection can then no longer be carried out!
8. Motion detectors are not suited for use with burglary and hold-up alarm systems, as the prescribed sabotage safety and a mul-tiple pulse counter are missing.
9. Ceiling installation: For installation, for example, under project-ing roofs or under balconies, motion detectors Professional LINEand Alarmtech are suitable.
By simply rotating the sensor casing, the device can be preparedfor ceiling installation. After installation the setting screws mustagain point downwards.
Important: bear in mind a mounting height of max 6 m!
Swiss Garde models with high-performance relaysrecommended for electronic control gears:
Swiss Garde Presence AP Item no 25080Swiss Garde Presence Concealed Item no 25070Swiss Garde 360 Premium Item no 25050Swiss Garde 360 Premium Concealed Item no 25060Swiss Garde 360 Plus Item no 25000Swiss Garde 290 IR Item no 25250Swiss Garde 300 Presence Concealed Item no 25210Swiss Garde 180 IR Concealed Item no 25280
Despite the high switching capacity of the relays used, we recommend to connect a relay or air gap switch upstream of inductive loads, energy-saving lamps and fluorescent lights, and to activate these via the short duration pulse function. This way you will increase the life of the relay by many years!
Operating instructions under www.zublin.de
![Page 39: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/39.jpg)
Accessories
67
Disturbance Sources
66
Disturbance Sources, Causesand Trouble ShootingSeveral factors can impair the correct functioning of a motiondetector, such as changes of temperature and reflexions withinthe detection area or the connection of inductive loads. Beloware briefly listed the most common disturbances, their causesand applicable trouble shooting.
1. The reach is too small or the switch-on of the light is too late, respectively.
Main causes:– The sensor / detection area is directed downwards too
steeply.– Front and direct approach towards the detector– Rain, fog or damp air– Reach controller set to minimum
To remedy these disturbances, we recommend to check the de-tection area. Please bear in mind that a person’s head eradiatesthe most heat and should therefore be within the detection area.As the heat rises, the upper detection area should be situated atthe height of the forehead or above! In case of front approach the installation place should be cor-rected. Installation in the middle above the door facilitates directstepping up towards the detector. It is better to fasten the detec-tor at 2 m sideways of the door! In damp air, such as in showers,the reach is shortened. Do bear this in mind in your planning.All Swiss Garde 360 ceiling detectors and all Busch-Wächtersare provided with a reach controller. Set the reach to maximumwithin the interior area, provided there is no draught!
2. Variations of reach
The main causes are fluctuations of temperature or direct ap-proach. High outside temperatures and bad ‘conditions of visibil-ity’ due to fog,rain or snow can temporarily shorten the reach.Excessive reaches occur if very hot heat sources, such astrucks, trains or buses, pass by at high speed. With these hot airtwirls, reaches of up to 50 m can be generated! In such cases,incline the outdoor detector downwards to a sufficient extent.
The automatic stabilisation of the reach of the Busch-Wächterreacts against the abovementioned effects, but for physical rea-sons it cannot guarantee 100 % values under al circumstances!
3. The light switches on and off for no reason.
Causes:– light bulb within the detection area – draught, wind– mains variations, interferences– daytime operation within the outside area: not possible!
Constant movements within the detection area, such as vehicles,winds moving bushes and trees, ventilators, light switching on and off, can cause the motion detector to switch on and off or totrigger it, respectively. Cover up the entire motion detector with abox (e.g. packing of the motion detector) and check whether themotion detector switches off entirely. In this, make sure that thebox is placed correctly and is not held onto by hand! If the lightswitches off, you will be certain that there is an external distur-bance source and that the motion detector works correctly. If not,the cause might be in the connected load. Redirect the motiondetector again in case of external disturbance sources or coverthe respective lens parts with clips or blinds. Please note: duringdaytime operation the sunlight can trigger a switch-on! Turn thecontroller to nighttime operation.
Draught, wind: The gasket must be inserted for the 360° con-cealed models because of possible draught caused by ventila-tors.
Please note: For inductive loads or time switches, switch in par-allel only up to a maximum of 4 motion or presence detectors.
4. The light does not switch off.
Causes:– inductive loads, interference– reflective surfaces, etc.– constant movement within the detection area– daytime operation (not possible within the outside area:
sunlight!)
Inductive loads:
Fluorescent lights, energy-saving lamps, electronic control gears, transformers, etc., are inductive loads which generate in-verse voltage and cause the motion detector to start the deadtime again. Switch on an RC quenching circuit between switchedphase and neutral conductor for the protection of the motion detector.
Electronic control:
In some motion detectors, resistance/condensers protect theintegrated relay against interference voltage peaks of the con-nected load. Such protective circuit causes a small capacitystandby current of below 1m A to flow if the relay is open (lightswitched off). If the motion detector is not loaded, a residualvoltage can be measured at the switched phase. In case of sev-eral motion detectors connected in parallel, the currents will addup. In conventional loads no difficulties would arise from this, but in electronic loads, such as an electronic time relay withsmall control current, this can lead to permanent switch-on.
To minimise the residual voltage, an RC quenching circuit can be installed in parallel to the load on each motion detector, theresidual voltage, however, will basically not be eliminated com-pletely. Such residual voltage can also be minimised or eveneliminated by switching in parallel a resistance or small electricbulb (also applied as control lamp). For the reasons mentioned,we recommend for electronic relays and time switches, to onlyswitch in parallel a maximum of 4 motion detectors or to use amechanical relay.
Reflective surfaces:
Mirrors, glass cabinets, light marble and sometimes even water-drops on the lens can cause disturbances. IR radiations are reflect-ed and trigger circuits. Cover up the respective lens parts. Heatedfloors can reduce the reach!
5. The light does not switch on
Causes:– the lamp is not working– there is no mains voltage– twilight value is set too low (dark)– connected incorrectly
Check the illuminant, the power supply and the twilight controller.Rotate the twilight controller to a very bright 1000 lux. In the shortduration pulse motion detector or in short duration pulse settings,the light will flash up only shortly up to 55 secs after the pause time!
Description Item no Price Euro
Safety Guard
Safety guard for Swiss Garde 360 Presence and Motion Detector, Pluswhite 150 Øx80mm 3331 15.00
Safety guard for Infra Garde 200, Infra Garde 140white 160x120x90mm 3011 15.00
Safety guard for Swiss Garde 360 wall installationstainless steel 120x95x50mm 3031 10.00
Safety guard for Infra Garde Maxumwhite 160x120x90mm 3071 10.00
Mounting Accessories
Pulse generator230V, 50 Hz 3390 10.00for time switch control 50 x 20 x 20 mm
Compact RC quenching circuit (condenser)For the protection against overvoltage and 3326 5.00malfunctions (cycles) in mains parallelinductances, such as relays, transformers or PL lights, etc.0,1 µF (100n +100R x 2)Dimensions: 23 x 13 x 7mmCan be connected to the motion detector
VaristorTo be installed for the protection against interference 3328 3.00voltage peaks (switch pulses of the mains),between phase and neutral conductor of the motion detector. Overvoltage of 10MV–K275Dimensions: 11 mm x 4 mm
Operating instructions under www.zublin.de
![Page 40: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/40.jpg)
Connection Diagrams Presence Detector
68
Connection Diagrams Motion Detectors
69
Infra Garde 200 Plus or 140 Plus withadditional activation via a break contact switch.
Infra Garde 200/140 Plus and Infra Garde 180Concealed with RC circuit to inhibit peak voltages.
RC circuit or relay circuit to inhibit peak voltages.
LN
LN L1
Maxum Inductive load
RC element(100μF/100Ω
Activation of staircase switch.Infra Garde Maxum
Activation via a break contact switchInfra Garde Maxum
Standard connection without control via external switches.
N L
LNPE
L
Parallel circuit with other lights or motion detectors.
LN L
LNPE
L N L
Connection with control via external push-buttons. (e.g. holiday mode, light ‘On’)
Parallel circuit of an additional light (without motion detector).
N L
LNPE
L N L
Aluminium Lantern 200 or Globe Lamp200 with additional break contact switch.
LN
L N
Swiss Garde 360 Presence as a fully auto-matic machine with additional activation viaa make contact switch.
Swiss Garde 360 Presence as a semiauto-matic machine with an external switch. Thelight can be switched on and off manuallythrough switches.
5A
LN
L L1S N
HLK
Swiss Garde Presence Mini with 2 relays and additional activation via a make contactswitch.
Swiss Garde 360 Presence Parallel Connection as a fully automaticmachine with additional activation via a make contact switch.
5A
LN
L L1S N
HLK
5A L L1S N
HLK
Swiss Garde 360 Presence Parallel Connection as a semiautomaticmachine with additional external switches.
LN
L NR L L NR L
Swiss Garde 360 Plus with additionalactivation via a make contact switch.
LN
L NR L
Swiss Garde 360 Premium Concea-led with additional activation via amake contact switch.
LN
L NR L
Swiss Garde 360 Plus or Premium Parallel Con-nection Concealed with additional activation viaexternal pushbuttons. (Recommendation: switchin parallel only up to max 4 motion detectors)
Connection with activation via an external switch. (Light fully On)
Stainless Steel LightsBall-Tec 200, Ruby-Tec 200, Post-Tec 200 Ball and Post-Tec 200 Ruby
Swiss Garde Infra Garde
LN
L N L
LN
LampLN L1Normally closed contact pushbutton
LN
L N LRelay
RC
LN
LampLN L1
Maxum
LN L
Staircase automatic
Normallyopencontactpushbutton
-
N L
LNPE
L
N L
LNPE
L
5A
LN
L L1S N
HLK
Potential-free Potential-free
5A
LN
L L1S N
5A
LN
L L1S N
HLK
5A L L1S N
HLK
Operating instructions under www.zublin.de
![Page 41: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/41.jpg)
Sender FA C S I M I L E
Order Number:
Our Ref.:
Item Number : Quantity: Text:
Remark:
E-mail address:
Date:
Order
Please send me your newsletters to the below e-mail address:______________________________
Please send me:___________________________________
M. Züblin AGNeue Winterthurerstr. 308304 WallisellenFax +41 44 8782233
70 71
Advertising Material
Order your advertising material pack from
M. Züblin AG under tel: +41 44 878 22 22
A4 Brochure Holder- A4 brochure action kit
Swiss Garde MZ 5000
- A4 brochure Swiss Garde MZ 5000
- Züblin Catalogue 2008
- A6 brochure Z-radio remote control
- Motion detector manual
A4 Brochure Racks- A4 brochure action kit
Swiss Garde MZ 5000
- A4 brochure Swiss Garde MZ 5000
A3 Brochure Racks- A3 brochure action kit
- A3 brochure Swiss Garde MZ 5000
A3 Demo Boards- Swiss Garde MZ 5000
Installation and 25W electric bulb
2m Rollup Demo Wall- Illustration of Swiss Garde MZ 5000
Brochure Racks
Brochure HoldersDemo Boards
Operating instructions under www.zublin.de
![Page 42: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/42.jpg)
Notes
72
![Page 43: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/43.jpg)
General Terms of Delivery and Payment of Züblin Elektro GmbH
1. ScopeThe following terms apply exclusively for all deliveries and services (hereafter called only ‘services’), including future ones, unless otherwise agreed inwriting. The terms and conditions of our customers only apply as far we have agreed to these in writing.
2. Conclusion of Agreement Our offers are without engagement. Agreements only materialise following our written confirmation of order or delivery. Members of our staff, in particular,are bound to confirm in writing any verbal additional agreements or promises which would go beyond the content of the written agreement or would alterthe present General Terms of Delivery and Payment to our disadvantage.
The illustrations, drawings or details of colours, weight and measurement relating to our offer are only approximate values, unless explicitly specified asbinding. DIN tolerances apply in case of complaints about DIN standardised products.
3. Prices Our prices apply on an ex works basis excluding packing and turnover tax as valid each time.
4. PaymentPayments are to be made within 30 days from date of invoice strictly net into our designated account. Payments are deemed effected only to the extentto which we can freely access the monies at our bank. Cheques and drafts are accepted for payment only; bank service charges are for the customer’saccount. These are payable immediately.
In case of late payment, we will charge interest to the amount of 8 points above the base rate, but mininum 10 %.
Retention of payments or offset against counterclaims is only admissible to the extent to which the counterclaims are undisputed or legally ascertained.
5. Passing of risk and short deliveriesThe risk is passed over to the customer as soon as we have handed over the product to the carrier or, should the dispatch be delayed through no fault ofour own, notified he customer of the readiness for dispatch, even in case we have accepted the costs of further services, such as forwarding charges.
6. Delivery periodThe delivery period commences with the dispatch of the confirmation of order, but not before clarification of all details relating to the execution of orderand technical issues and also receipt of an agreed down payment. The delivery period is deemed met if the product has left the factory by the expiringdate or readiness for dispatch has been advised, should the dispatch be delayed through no fault of our own. Shipments are charged the cost of postageand packing costs to the amount of Euro 6.00. For express deliveries the standard postal rates apply.
As regards late delivery, in case of simple negligence our liability is limited to a flat-rate compensaton to the amount of 0.5 % per complete week, but tono more than 5 % of the late delivered order value. A claim for damages in lieu of delivery in accordance with item 9 remains unaffected by this. Our delivery is subject to timely and correct supply to ourselves by our subcontractors.
7. Retention of titleWe retain title to the delivered product until receipt of all payments due and the irrevocable credit entry of all accepted cheques and drafts arising from thebusiness connection with the customer. Should a current account with business partners be in place, retention of title refers to the recognised balance.
The customer has the right to resell the product that is subject to retention of title, in an ordinary course of business; he will, however, assign to us in advance with immediate effect all claims to their full amount, which might arise from the resale or subsequent use on behalf of a customer, against the sameor third parties. The customer has the right to collect the claims assigned to us, as long as he meets his payment obligations from the proceeds collected.
If the customer no longer meets his payment obligations, we have the right to require the customer to advise us of the claims assigned and their debtors, toprovide us with all necessary details to enable us to make collection, to hand over all respective documents and to advise his debtors of such assignment.Redemption of product that is subject to retention of title, does not mean withdrawal from the Agreement. In case we declare withdrawal, we will be entitledto our discretionary utilisation of said product.
If the value of the securities exceeds our claims by more than 10 %, we will insofar release our securities at our own option on the customer’s request.
8. Liability for defectsAny defects are to be advised to us in writing without delay, but not later than 8 days following receipt of the product, and latent defects not later than 3 days following their detection. If such time limits are exceeded, all claims and rights arising under our liability for defects will lapse. The limitation period is 12 months from delivery, unless we have breached our obligations intentionally or in a grossly negligent manner or have maliciously concealedthe defect.
In case of justified complaints we will deliver a substitute or rectify the product at our own option. The costs of supplementary performance arising fromthe fact that the purchased product was transferred upon delivery to a place other than the commercial premises of the customer, will not be borne.
The violation of the rights of third parties is only deemed a defect if such industrial property rights exist within the European Economic Area (EEA).
9. General liabilityAny claims of whatever nature for damages against us are excluded if we, our legal representatives or auxiliary persons have caused the damage throughsimple negligence. Such exemption from liability does not apply in case of bodily harm or in taking over a contractual guarantee or in case of violation ofessential contractual obligations which would jeopardise performance of the purpose of the agreement. In this, our liability is, however, limited to thescope of the guarantee or, in case of gross violation of essential contractual obligations, to contractually anticipated damages, respectively. Any claimsunder the Product Liability Act will remain unaffected.
With the exeption of claims arising from liability for defects, under the Product Liability Act and for injury to life or limb or damage to health, claims fordamages will lapse one year after the customer has become aware of the damage and his liability to pay damages or should have become aware of thesame without gross negligence.
10. Place of performance, court of jurisdiction, applicable lawPlace of performance for all services arising under the delivery contracts is our registered office. For all disputes arising from the delivery contract, courtof jurisdiction is the one in charge of our registered office. We have the right, however, to also take legal action at the court of jurisdiction covering theregistered office of the customer.
German law is applicable. The United Nations Convention on Contracts for the International Sale of Goods dated 11.04.1980 is excluded.
![Page 44: Zublin](https://reader034.fdocuments.in/reader034/viewer/2022042823/568bdbc11a28ab2034afb45d/html5/thumbnails/44.jpg)
Für Sicherheit,Komfort und Stromersparnis !For security,comfort and power saving !
M.Züblin AGNeue Winterthurerstrasse 308304 WallisellenTelephone +41 44 878 22 22Fax +41 44 878 22 33www.zublin.de