ZM4001FS/ZM4001FR DN15/15 - cranefs.com · DZR Brass (BS EN 12165 / CW602N) fan coil valve/terminal...
1
24 TECHNICAL HELPLINE: +44 (0)1473 277400 E: [email protected] W: www.cranefs.com BALANCING VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. ZM4001FS/ZM4001FR DN15/15 Features & Benefits • Lightweight, compact and pre-fabricated unit - now available with Pressure Independent Control Valves. • Provides accurate flow rates & differential pressure control as well as system flushing and isolation. • Fully assembled and factory tested unit reduces installation time, costs and specification risks. • On/off or modulating actuators are available separately to match specification. Materials NO. PART MATERIAL SPECIFICATION QTY 1 Bypass H-Body DZR Brass BS EN 12165 (CW602N) 1 2 Tailpiece DZR Brass BS EN 12165 (CW602N) 2 3 Strainer Drain D299P Bronze BS EN 1982 (CC491K) 1 4 D991 PICV DZR Brass BS EN 12165 (CW602N) 1 5 D901S, D901SLF, D902S DZR Brass BS EN 12165 (CW602N) 1 SIZE (DN) A1 (mm) A2 (mm) B (mm) C (mm) D (mm) E (mm) WEIGHT (kg) DN15/15 222 145 40 43 74 133 2.3 Dimensions & Weights Dimensional Drawings PRESSURE RATING: PN16 TEMPERATURE RATING: -10 to 100°C END CONNECTIONS: Flushing bypass body - BSP Taper Tailpieces - BSP Taper SPECIFICATION DZR Brass (BS EN 12165 / CW602N) fan coil valve/terminal unit valve assembly. Pre-assembly to requirements of each individual terminal unit to include a flushing bypass with integral isolation valve. Pressure Independent Control Valve (PICV), drain and pressure test points. On/Off or modulating actuator is required to control PICV. Available in standard or reverse handed orientations. Valid as of 260418 Dominator PRO & PICV (with FMD & Strainer Drain) C B A1 E D A2 Note - Actuator supplied separately ZM4001FS ZM4001FR PN16 1 2 3 4 5 Dominator Pro ®
Transcript of ZM4001FS/ZM4001FR DN15/15 - cranefs.com · DZR Brass (BS EN 12165 / CW602N) fan coil valve/terminal...
24TECHNICAL HELPLINE: +44 (0)1473 277400
E: [email protected] W: www.cranefs.com
BA
LAN
CIN
G V
ALV
ES
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
ZM4001FS/ZM4001FR DN15/15
Features & Benefits
• Lightweight, compact and pre-fabricated unit - now available with Pressure Independent Control Valves.
• Provides accurate flow rates & differential pressure control as well as system flushing and isolation.
• Fully assembled and factory tested unit reduces installation time, costs and specification risks.
• On/off or modulating actuators are available separately to match specification.
Materials
NO. PART MATERIAL SPECIFICATION QTY
1 Bypass H-Body DZR Brass BS EN 12165 (CW602N) 1
2 Tailpiece DZR Brass BS EN 12165 (CW602N) 2
3 Strainer Drain D299P Bronze BS EN 1982 (CC491K) 1
4 D991 PICV DZR Brass BS EN 12165 (CW602N) 1
5 D901S, D901SLF, D902S DZR Brass BS EN 12165 (CW602N) 1
SIZE (DN)
A1 (mm)
A2 (mm)
B (mm)
C (mm)
D (mm)
E (mm)
WEIGHT (kg)
DN15/15 222 145 40 43 74 133 2.3
Dimensions & Weights
Dimensional Drawings
PRESSURE RATING: PN16
TEMPERATURE RATING: -10 to 100°C
END CONNECTIONS: Flushing bypass body - BSP Taper Tailpieces - BSP Taper
SPECIFICATION DZR Brass (BS EN 12165 / CW602N) fan coil valve/terminal unit valve assembly. Pre-assembly to requirements of each individual terminal unit to include a flushing bypass with integral isolation valve. Pressure Independent Control Valve (PICV), drain and pressure test points. On/Off or modulating actuator is required to control PICV.
Available in standard or reverse handed orientations.
Val
id a
s of
260
418
Dominator PRO & PICV (with FMD & Strainer Drain)
C
B
A1
E
D
A2
Note - Actuator supplied separately
ZM4001FS ZM4001FR
PN16
1 2 3
4 5
Dominator Pro®
