zigbeee.pdf
-
Upload
marie-clark -
Category
Documents
-
view
72 -
download
2
description
Transcript of zigbeee.pdf
&SMART ENERGY
HOME AUTOMATION
Intelligent Home Automation SystemBased on ZigBee® Wireless Sensor Network Technology
Product Catalogue
2 0 1 1
TM
ISOISO--9001 9001 IECQ QC 080000IECQ QC 080000
ZigBee® Wireless Intellectual Home Automation SystemHome Care - Home Automation - Smart Energy
In recent years, man’s work and life are increasingly tight with telecommunication and information. The informationized society has changed human being’s way of life as well as challenged the traditional residence.
Followed by the rapid economic expansion, living standard keeps raising up day by day that people have a higher requirement for dwelling functions. The intellectualized society brings diversified information and safe, comfortable and convenient life has become the ideal for every modern family.
Nowadays, intellectual home automation system is progressively popularized and moving toward to us with popular pricing. The system utilizes household electric appliances, intellectual electric controlling center, broadband network etc. to link the equipments of electricity, water and gas into one unit and connect to external internet. This will carry out the goal of modernized home integration system of automation control and management, house burglarproof and security and remotely control the household electric appliances through internet. The basic target of intellectual home automation system is to provide people a comfortable, safe, convenient and high efficient life environment and a humanistic service. To this end, Netvox launches our won intellectual home automation control network technology. ZigBee wireless intellectualized home system is the home automation control network based on ZigBee wireless telecommunication technology.
What is ZigBee?ZigBee is a short coverage, low data rate wireless telecommunication technology. The term
of “ZigBee” originates from the zig-zag waggle dance honeybees use to share critical information. Its features are short range, less complication, low power, low data rate and low cost. It’s
widely deployed in the field of auto-control and remote control and can be integrated with various devices. ZigBee lies in between wireless markup technology and Bluetooth. It’s mainly applicable in short range wireless communication and connection. ZigBee is based on IEEE802.15.4 standard and through the mutual co-ordination between thousands of tiny sensors, that brings about the telecommunication. These sensors require low power and they send the data from one sensor to another through radio waves and consequently they come with rather high telecommunication efficiency. In brief, ZigBee is a comparatively low cost, low power, short coverage wireless network telecommunication technology.
128 bit AES64bit,128bitSSIDSecurity
250Kbps1Mbps11MbpsData Rate
YesnoRoaming enableExtension
10m-several km10m100mcoverage
30 milliseconds10 seconds3 secondsTime for network communication
65000732Nodes Number
SimpleComplexHigh complexityComplexity
Several yearsSeveral daysSeveral hoursBattery life time
ZigBeeBluetoothWiFiFeature
*Note:Products listed in this catalog have 7 channels by default complied
ZigBee Home Automation Profile, unless stated otherwise.
Home Security and Alarm
Electric Appliances Control
Lighting Control
HVAC Control
Home Entertaining System Control
Home Care Management
ZigBee ® Wireless Intelligent Home Automation SystemHome Care - Home Automation - Smart Energy
What can Netvox do for you with our ZigBee intelligent home system?
At anywhere inside a house, you can deploy lighting equipments and HVAC system flexibly.
Automatic control brings better management, convenience and safety.
Reduce energy consumption.
Installation and upgrade without fixing up a building or rewiring.
Deployment and operation can be simply done by a remote
Easily install wireless sensors to detect the changes where the sensors were placed.
Any unusual conditions will trigger alarm and send notice
Devices will send out warning when power is running low.
Periodically inspect whether the devices enrolled in the network and work properly, if not, abnormal messages will be sent and notified.
Can read switch devices’ status(ON or OFF),and send the message to remote end through internet, mobile phone service etc.
Remotely control the enrolled devices from media as internet, mobile phone service etc.
Main functions are:
Home Care - Home Automation - Smart Energy
1
2
34
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
….
Low Power Consumption
Flexible Coverage
Wireless ControlControl lighting switches, outlets, stereos, videos, air condition
and even automatic rice cooker, etc.
High CapacityWith workable star, bus and mesh network structure, a main node controls several subsidiary nodes -65000 nodes max. Simultaneously, the main node can be managed from the last network nodes to form a wide network.
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
……
.……
….....
……
……
……
……
……
……
……
……
……
……
……
….…
.……
……
……
…
……
……
……
……
……
….…
……
……
……
……
……
……
…..
ZigBee® Smart Home System
In accordance with individual request, users can decide the transmission coverage. In general, the covered distance between two nodes is around 10~100 m, with RF power enhanced, the coverage can be increased to 1000m. Through the relay between routers andnodes, the coverage can go much farther.
In standby low power consumption mode, two AAA batteries can support one node for 6~24 months or longer. This is the extraordinary advantage of ZigBee. Comparatively, Bluetooth can work for couples of weeks, WiFi can only work for several hours.
5 Internet ConnectionUsers can control and monitor the system from anywhere in the world.
……
……
……
……
……
……
….…
….…
……
.
The system utilizes ZigBee HA profile compatible devices, users can select preferable scheme to make it customized.
6 High Expansion
……
..……
……
……
……
….…
..
ZigBee ® Wireless Intellectual Home Automation System
7 Time SettingMake the best time setting for electric appliances
to achieve power saving, cost saving and ensure safety.
……
……
….…
…..
8 Easy InstallationEasy install, connect and replace with your
existing lighting switches and outlets.
ZigBee® Wireless Intelligent Home Automation SystemHome Care - Home Automation - Smart Energy
ZigBee® Smart Home System
Netvox ZigBee Wireless Home Automation System Sketch Map
ZigBee and ZigBee PRO
ZigBee PRO was completed in 2007. Comparing with ZigBee, ZigBee Pro has many advantages including efficient transmitting path, optimized device address search feature, sync-broadcasting feature, transmission quality management and data fragmentation mechanism.
ZigBee Pro standard not only inherited main features from its predecessor ZigBee standard but also has improved in features and offers backward compatible. ZigBee std. feature set employed tree address assignment, AODV network routing, unicast, multicast, broadcast and security. In comparison ZigBee Pro employed random addressing which replaces tree addressing of ZigBee.Though it included one similar to AODV routing, ZigBee Pro provides a many to one source routing option. ZigBee Pro offers limiting broadcast addressing scheme and supports high level of security. All the products are based on the latest ZigBee Pro standard offering our customer with competitive solutions.
Glass breaksensor
Internet
Wall switch
Intellectual socket Curtain controller dimmer H/T sensor H/T console
ZigBee gateway
Infrared controller
Smoke/gas detector
Sensor
infrared
Light sensor
Panic button
Gas keeper
ZigBee wireless chainNetwork Electric powerInfrared
siren
telephone
Phone line
ZigBee remote
Main Table
Table of Content
Z100 ZigBee Module………….…..….43
Z100A ZigBee Module………..…..…..44
Z110P ZigBee Module………..…..….45
ZB01 ZigBee Motion Detector………………...07
Z302A ZigBee Window Sensor……………....08
Z302B ZigBee Light Sensor Switch………….09
Z302C ZigBee Glass Break Sensor………….10Z302D ZigBee Panic Button…………………..11Z302E Asset Tag...………….…….…………..12Z302H Light Sensing………………………………..13Z302G Light Sensor Dimmer Switch…….…..14ZA01A/02E ZigBee Smoke Detector..…….....15
ZA01B/C/D ZigBee Gas Detector .……….…..16
ZA10 ZigBee Gas/water Keeper………....…..17
Z601A/B ZigBee Alarm…………….…………..18
ZB02A/B/C ZigBee Wall Switch..................19
ZB02E ZigBee doorbell……………….…….20
ZC01 ZigBee Dimmer Ballast……………...21
ZC06 ZigBee Dimmable LED Tube….…….22
ZD01A/B ZigBee Curtain Controller..……...23
Z800 ZigBee Power Outlet..……………..…24
Z800R Range Extender/Power-Outlet……25
Z801Rx/Tx ZigBee Switcher..…………..….26
Z801TxB Sensor Transmitter…………….…27
Z801WLS Flood sensor……………………..28
Z802 ZigBee Two-Way Switch.…………..…29
Z803 ZigBee Extension Socket.. …………..30
Z805 ZigBee Switch Control..…………….…31
Z806 ZigBee RX Switcher Unit...……………32
Z807A ZigBee Wall Socket….....……....……33
Z807B ZigBee Wall Socket….....……….……34
Z810 Switch Ctrl/Consump. Disp.……… …35
Z812A Wireless Switch Module…..………....36
Z811 ZigBee Switch Control………………………37
Z501A/B/C ZigBee Remote..……..…….41
Z503 ZigBee HA Local Commander…...42
Z103 A/B ZigBee USB Dongle..….…..46
Z201 ZigBee Coordinator……………...47
Z202 ZigBee Internet Gateway………..48
Z202C Gateway/Coordinator………….49
Z210 ZigBee Infrared Control Unit..…..50
ZL01A Rs232 & ZigBee Adaptor.…….51
ZL01B Rs485 & ZigBee Adaptor.…….52
ZL01C Ethernet & ZigBee Adapt……..53
ZL01D GPIO & ZigBee Adaptor……....54
ZL01E USB & ZigBee Adaptor……….55
iPhone APPS…………………………....56
Netvox ZBHA API …………….…..….…57
ZiG-BUTLER Software...………………..58
ZigBee Location and Asset Tracking.….59ZigBee Environmental Monitoring...……62ZigBee Other Applications………………66
Security System HVAC Management
ZigBee Module
Network and Adapter
Remote
Power Control
Z716 H/T Sensor with Display…..………38
Z711/712/713 ZigBee H/T Sensor…….39
Z725A/B Far Range Ambient Sensor….40
ZigBee® Wireless Sensor
ZB01A/B/CInfrared Motion Sensor
ZB01Infrared Motion Detector
Main Features
• ZigBee device type:IAS Zone / On Off Light Switch / Temperature Sensor
• Match up with CIE device• ZigBee HA profile compatible• Two power selectable:12V DC power or CR123A battery• Wide angle detection• Indoor temperature induction
Temperature -10~50℃Operating Ambient:
Up to 50 meters indoorCommunication Range:
30”Initiation Time:
80mm×60mm×34mmProduct Dimension:
Humidity max. 95%RH
2.5 metersInstallation Height:
Radius 6m, 130 degree angleDetection Coverage:
Passive InfraredDetection Mode:
2.4-2.4835 GHzFrequency:
IEEE 802.15.4 / ZigBeeProtocol:
Tx 38mA / Rx 38mAConsumption:
2 x 3V CR123A batteriesor DC 12V switching power supply
Power Supply:
Technical Parameter
ZB01A Infrared motion sensorZB01B Outdoor light controlZB01C Motion + light control+ temperature sense
Product Model
ZB01 is a infrared motion detector integrated
with ZigBee wireless technology. Through infrared
acquisition, it induct actions for any illegal break-
in. ZB01AZB01A is an infrared motion detector. When
motion is detected, it sends a message to the
security center. ZB01BZB01B is a light switch. When the
surrounding light intensity is low, the ZB01B
sends a 30 seconds light on message. ZB01C
contains ZB01AZB01A and ZB01BZB01B feature plus a
temperature sensor for temperature reporting.
2
Z302A
Z302AWireless Window Sensor
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
@close:>20mm@open:<15mm
Reed Switch Trigger
Magnetic 32.5mm × 11.9mm × 10.5mm
Body 55.8mm × 29.8mm × 13.8mmProduct Dimension:
@standby mode 1.2 uA
@transmitting mode 38 mA
@receiving mode 38 mAConsumption:
2.4-2.4835 GHzFrequency:
IEEE802.15.4 (ZigBee Pro)Protocol:
Up to 50 metersCommunication Range:
3V CR2450 button cell batteryPower Supply:
ZigBee® Wireless Sensor
Window Sensor
Main Features
• ZigBee device type:IAS Zone • Match up with CIE alarm devices• Easy to install with wireless deployment, easy
configuration and usage• The smallest sensor in the world • Environmental friendly, a button battery lasts for two
years.• Open std ZigBee Pro based HA profile
Technical Parameter
Z302A is a wireless window contact sensor fully HA
profile standard compliant based on ZigBee Pro.
The main unit and the magnetic contact can be each
installed on window side. When the window is opened,
Z302A will send alarm message to the control center.
Z302A utilizes the latest ultra-low power consumption
technology and requires no wiring. It requires just one
button battery to support its operation for up to 2 years.
ZigBee® Switch and Power Supply
Z302BWireless Light Sensor
Z302B is a light sensor switch based on ZigBee Wireless
Communication Technology , it sends control signal
according to the light intensity around to the paired lighting
devices in ZigBee network. Besides, Z302B may work with
dimmer lighting device for light adjustment. Z302B has the
merits of easy installation and low power consumption, it
does not need any wiring and is equipped with the newest
energy saving technology. A cell battery can last for months.
Z302B has excellent compatibility that meets IEEE 802.15.4
ZigBee HA Profile. It is suitable for any network in ZigBee HA
protocol.
Main Features
3V CR2450 button batteryPower Supply:
55.8mm × 29.8mm × 13.8mmProduct Dimension:
@transmitting mode 38mA
@receiving mode 38mAConsumption:
2.4-2.4835 GHzFrequency:
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
Up to 50 meters indoorCommunication Range:
Z302BLight Sensor Switch
• ZigBee device type:ON/OFF Switch, Level control
• Photo sensor equipped
• Fully IEEE 802.15.4 compliant
• Compatible with ZigBee Smart Home Automation Profile
• CR2450 button battery operated
• Energy Saving application
Technical Parameters
ZigBee® Wireless Sensor
Z302CWindow Sensor with Glass Break Sensor
Z302CWireless Glass Break Sensor
Z302C is a two in one wireless window sensor
based on ZigBee HA profile standard. As it joined
in the network, it can detect any illegal break-in
and multiple window glass break detection and
then send the alarm message to the siren device to
trigger the alarm system.
Main Features
3V CR2450 button batteryPower Supply:
@Close:>20mm@Open:<15mm
Normal Open Type Reed Switch:
Main unit: 55.8mm x 25.8mm x 13.8mmMagnet: 32.5mm x 11.9mm x 10.5mm
Product Dimension:
@standby mode 3uA
@transmitting mode 38mA
@receiving mode 38mAConsumption:
2.4-2.4835 GHzFrequency:
Humidity max. 95%RH
Temperature -10~50℃Operating Ambient:
Up to 50 meters indoorCommunication Range:
• ZigBee device type:IAS Zone • Match up with CIE alarm devices• Fully support ZigBee HA profile• Fully compatible with IEEE 802.15.4 / ZigBee• The smallest sensor in the world • A button battery can support the operation for one
year• Easy installation• Consist of two magnet switch sensors and up to 10
glass break sensor• Automatically binds with ZigBee control device and
send alarm message when it is triggered• Easy configuration and usage
Technical Parameter
ZigBee® Security Device
Z-302DPanic Button
Main Features
Technical Parameter
Z302DPanic Button
Z302D acts as a CIE device for emergency
use. It can be worn on children’s or the elder’s
wrist and when they ask for urgent assistance,
simply push the red button and Z302D will send
the alarm message to the command center. CIE
command center will then send out alarm sound
or lighting alert for immediate help.
Z302D is fully compatible with IEEE802.15.4
ZigBee HA profile and suitable for ZigBee HA
Profile network.
@receiving mode 38mAConsumption:
@transmitting mode 38mA
3V CR2450 button batteryPower Supply:
@standby mode 1.0uA
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
2.4-2.4835 GHzFrequency:
55.8mm x 29.8mm x 13.8mmProduct Dimension:
Up to 50 meters indoorCommunication Range:
• ZigBee device type:IAS Zone • Match up with CIE alarm devices• Fully compatible with IEEE 802.15.4 /
ZigBee• Battery lifetime can stay long
Panic buttonApplication for the elderly nursingCompatible with ZigBee Smart Home profile
ZigBee® Wireless Sensor
Main Features
Technical Parameter
3V CR2450 button batteryPower Supply:
55.8mm x 29.8mm x 13.8mmProduct Dimension:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
2.4-2.4835 GHzFrequency:
@standby mode 8.0uA
@receiving mode 38mA
@transmitting mode 38mAConsumption:
Up to 50 meters indoorCommunication Range:
Z302EAsset Tag
Z-302EWireless Asset Tag
Z302E is a asset tag for security based on ZigBee HA
standard. It is an asset tag equipped with light and movement
sensor. Z302E can be attached to goods and when the goods
was moved or removed from the dark to the light, Z302E will
be triggered and send alarm message to the CIE command
center and CIE will send out alert notification to the user to
ensure the safety of users’ property.
Z302E applies the latest node technology and a button battery
can support its operation for couples of months. It’s fully
compatible with IEEE802.15.4 ZigBee HA profile and works
with ZigBee HA profile network.
• ZigBee device type:IAS Zone• Match up with CIE alarm device
• Installed with light and movement sensors• Easy installation:wireless communication, no
wiring is required.
• Exquisite:the smallest wireless sensor in the world
• Energy saving:simply a button battery can support
its operation for couples of months
• Compatibility:compatible with any ZigBee Smart
Home standard system.
ZigBee® Switch and Power Supply
Z302GWireless Light Sensor
Main Features
3V CR2450 button batteryPower Supply:
55.8mm × 29.8mm × 13.8mmProduct Dimension:
@transmitting mode 38mA
@receiving mode 38mAConsumption:
2.4-2.4835 GHzFrequency:
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
Up to 50 meters indoorCommunication Range:
Z302GLight Sensor
• ZigBee device type:Light Sensor
• Photo sensor equipped
• Fully IEEE 802.15.4 compliant
• Compatible with ZigBee Smart Home Automation Profile
• CR2450 button battery operated
• Energy Saving application
Technical Parameters
Z302G is a light sensor switch based on ZigBee Wireless
Communication Technology. Z302G sends light intensity
value to a receiver or light information display device.
Z302G has the merits of easy installation and low power
consumption. It does not need any wiring. It is equipped with
the latest energy saving technology. A button battery can last
for months. Z302G has excellent compatibility that meets
IEEE 802.15.4 ZigBee HA Profile. It is suitable for ZigBee HA
Profile network.
ZigBee® Switch and Power Supply
Z302HWireless Light Sensing Dimmer
Switch
Main Features
3V CR2450 button batteryPower Supply:
55.8mm × 29.8mm × 13.8mmProduct Dimension:
@transmitting mode 38mA
@receiving mode 38mAConsumption:
2.4-2.4835 GHzFrequency:
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
Up to 50 meters indoorCommunication Range:
Z302HLight Sensing Dimmer Switch
• ZigBee device type: Dimmer Switch
• Photo sensor equipped
• Fully IEEE 802.15.4 compliant
• Compatible with ZigBee Smart Home Automation Profile
• CR2450 button battery operated
• Energy Saving application
Technical Parameters
Z302H is a light sensing level switch based on ZigBee
Wireless Communication Technology.
Z302H sends ON/OFF & Level control signal according to the
light intensity around it to the paired lighting devices in
ZigBee network to maintain light intensity within the room.
Z302H has the merits of easy installation and low power
consumption. It does not need any wiring. It is equipped with
the latest energy saving technology. A button battery can last
for months. Z302H has excellent compatibility that meets
IEEE 802.15.4 ZigBee HA Profile. It is suitable for ZigBee HA
Profile network.
ZigBee® Wireless Senor
Main Features
Technical Parameter
ZA01A/ZA02ESmoke Detector with Heat Sensor
ZA01A/ZA02EWireless Smoke Detector
ZA01A/ZA02E is highly reliable wireless control CIE devices based on ZigBee HA profile standard. It can detect the concentration of smoke in the air and send out alarm sound accordingly. It is equipped with temperature sensor for detecting the temperature in the area. When the heat is over 65℃, it will send out the alarm sound. Moreover, it can bind with alarm devices and when it is triggered, a alert message will be send to the bound alarm devices.
85~265 V AC or DC 12VPower Supply:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
>=85dB at 1 meterSiren Volume:
LEDStatus Display:
@receiving mode 85mA/45mA@transmitting mode 85mA/45mA
Consumption:
Up to 50 metersCommunication Range:
92mm × 50mmProduct dimension:
2.4-2.4835 GHzFrequency:
IEEE 802.15.4 / ZigBeeProtocol:
ZA01ATin dioxide based smoke detector(resistor sensor type)ZA02EPhotoelectric type
Product Model
• ZigBee device type:IAS Zone• Equipped router with temperature sensor• Match up with CIE alarm devices• Wireless switch on/off siren sound• Exquisite• Compatible with ZigBee HA profile• Backup battery power available for Z-A02E only• LED will flash when it’s triggered• Two type selectable: resistor and Photoelectric type• ZA02E model comes with AC, DC or battery power
source
ZigBee® Wireless Sensor
ZA01B/C/DWireless Inflammable Gas Detector
ZA01B/C/DInflammable Gas Detector with Heat Sensor
@receiving mode 85mA/45mA@transmitting mode 85mA/45mA
Consumption:
85~265VACPower Supply:
Temperature -10~60℃
Operating Ambient:
Humidity max. 95%RH
>=85dB at 1 meterSiren Volume:
LEDStatus Display:
Up to 50 meters indoor
Communication Range:
D92mm × H50mmProduct Dimension:
2.4-2.4835 GHzFrequency:
ZA01 series can detect the
concentration of the gas in the air and when
it reaches the preset value, the detector will
send out alarm . Still, the detectors are
equipped with temperature sensor for
detecting the temperature in the area. When
the heat exceeds 65℃, it will send out alert.
Moreover, it can bind with CIE alarm
devices and it will send out alarm messages
to the CIE device it bound with when it is
triggered.
ZA01BGas Detector (Methane)ZA01CCO DetectorZA01DLiquid Petroleum Gas Detector(Propane, butane etc)
Detection Type
Technical Parameter
• ZigBee device type:IAS Zone• Equipped router with temperature sensor• Match up with CIE alarm device• Wireless switch on/off alarm sound• Exquisite• Compatible with ZigBee HA profile• LED will flash when it is triggered• When it is triggered, the enrolled ZA10 gas
keeper will close the gas valve automatically.• Detection type:
ZA01B:natural gas (Methane)ZA01C:COZA01D:liquid petroleum gas
Applicable with• Z-A10 Gas Keeper
Main Features
ZigBee® Switch and Power
ZA10ZigBee Gas / water Keeper
Main Features
Technical Parameter
ZA10ZigBee Gas / Water Keeper
ZA10 is a ZigBee wireless intellectual gas keeper
and work with gas detectors in the ZigBee network.
When the enrolled gas detectors detect exceeding
concentration of gas in the air, ZA10 will close the gas
valve automatically to avoid the leak of gas and ensure
the users’ safety.
Z-A10 works in wireless communication and
required no wiring. Simply join in the network and
binds with the detectors and it can get working.
<530mA Max.@standby <48mA
Consumption:
12V DC power supplyPower Supply:
Humidity max. 95%RH
IEEE 802.15.4 / ZigBeeProtocol:
154mm × 66mm × 129mmProduct Dimension:
Temperature -10~50℃Operating Ambient:
2.4-2.4835 GHzFrequency:
Up to 50 meters indoorCommunication Range:
• ZigBee device type:Pump• Installed Router type• Match up with CIE alarm device• Innovative and elegant design• Compatible with ZigBee HA profile• Automatically close the gas valve when it’s triggered• Waterproof and can be used to open the hydrant• 12V DC power supply• Can be switched manually while system failure or no
power supply
9
ZigBee® Alarm
• Z601A:without PSTN dialer• Z601B:with PSTN dialer
Z601A/BAlarm
Main Features
Technical Parameter
Z601A/BSiren
Product Model
2.4 ~ 2.4835 GHzFrequency:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
91mm × 65mm × 43mmProduct Dimension:
Up to 50 metersCommunication Range:
85db at 1 meterAlarm Volume:
DC 12VPower Supply:
Z601A/B is a siren used in emergency case and
based on ZigBee HA standard. It can join in the
network and bind with other devices and acts as a
CIE device. As soon as it receives the alarm
message from the bound devices, it will generate
the alert sound. Four different alert sounds: fire
alert, emergency alert, burglar alert and doorbell
sounds. Users can set up the preferable alert sound
in the SW based on the actual requirement.
Moreover, the dialer of Z601B can dial to the preset
number for remote emergency alert .
• ZigBee device type:
–Z601A & B : IAS Warning Device• Match up with CIE alarm device• ZigBee HA CIE device• Four different alert sounds according to
different emergency cases• When it’s disarmed, it can be used as doorbell• Equipped with binding button• Compatible with ZigBee Smart Home devices• Installed PSTN dialer and can make
emergency call (only available with Z601B)
10
ZigBee® Switch and Power
ZB02A/B/CWall Switch series
Product models
Main Features
Technical Parameters
ZB02A/B/CWall Switch
ZB02 is ZigBee wireless wall switches series and
can bind with devices carrying switch function in the
network. It possesses the features of low power
consumption in standby mode and brings the function
of low power inspection. It is fully compatible with
IEEE802.15.4 ZigBee HA profile and works with any
ZigBee HA profile network.
Z-B02 comes with three types: one, two and three
gang switch.
ZB02 works in wireless communication and requires
no wiring. Simply joins in the network, binds with the
other On/Off switch devices and remote control them
by toggling.
ZB02A: single gang
ZB02B: two gang
ZB02C: three gang
Temperature -10~55℃
3V (2 AAA batteries)Power Supply:
2.4-2.4835 GHzFrequency:
Humidity max. 95%RHOperating Ambient
81.75mm × 81.75mm × 14.2mmProduct dimension:
@transmitting mode 33mA
@receiving mode 33mA
IEEE 802.15.4 / ZigBeeProtocol:
@standby mode 0.5uAConsumption:
Up to 50 meters indoorCommunication Range:
• ZigBee device type:On/Off Light Switch• Exquisite and elegant design• Compatible with ZigBee Home Automation profile• Can be placed on the table or the wall• Runs on 2 X AAA batteries• Low power notification• Three types: one key, two keys and three keys
ZigBee® Door Bell
ZB02EZB02EZigBee door bellZigBee door bell
ZB02EZigBee door bell
IEEE802.15.4(ZigBee)Protocol:
2.4-2.4835 GHzFrequency:
Humidity max. 95%RHOperating Ambient:
81.75mm × 81.75mm × 142mmProduct dimension:
Temperature -10~55℃
@transmitting mode 33 mA
@receiving mode 33 mA
@standby mode 0.5 uAConsumption:
2 x AAA batteryPower Supply:
60 mCommunication Range:
ZB02E is a ZigBee wireless doorbell. It can be
paired with the warning device of the ZigBee
security network to trigger doorbell sound when
pressed. It has a ultra low power consumption
during stand-by and supports low battery
notification.
ZB02E is a wireless device without the need of
cabling for easy installation.
Main Features
• ZigBee device type:On/Off Switch• Exquisite and elegant design• Compatible with ZigBee Home Automation profile• Can be placed on the table or the wall• Runs on 2 X AAA batteries• Low power indication
Technical Parameters
ZigBee® Switch and Power
ZC01Wireless CFL Dimmer
Main Features
ZC01Wireless CFL Dimmer
• ZigBee device type:Dimmable light• Carrying the function of on/off and illumination
adjustment• Installed Router device• Smart Energy• Suitable with CFL light tube• Compatible with ZigBee HA profile
ZC01 is a reliable wireless dimmable
lamp stand that accept BB 4P power saving
light tube. It carries out the functions of light
illumination adjustment, light on/off, time
setting, scheme setting and power saving.
213mA@Tx / 213mA@RxConsumption:
85~265V ACPower Supply:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
61.3mm(D) ×60.5mm(H)Product dimension:
IEEE 802.15.4 / ZigBeeProtocol:
2.4-2.4835 GHzFrequency:
27WPower:
Up to 50 meters indoorCommunication Range:
Technical parameter
ZC06ZC06Dimmable LED TubeDimmable LED Tube
ZC06ZigBee dimmable LED tube
• four level control function • T8 tube• Controllable via wireless remote controller• 1080 lumen max.• 50,000-hour lamp life• Power range 85V AC ~ 265V AC• Compatible with ZigBee Home Automation
profile
105mA @220V AC /@max lighting output205mA @110V AC /@max lighting output
Consumption:
~21W @220V AC /@max lighting output~21.5W @110V AC /@max lighting output
Efficiency:
85 ~ 265V ACInput Power:
T8Installation:
≥ 400 Lux / 1.5mIntensity:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
1200mm(L)Product Dimension:
IEEE802.15.4(ZigBee)Protocol:
58mAConsumption:
Up to 50 meters indoorCommunication Range:
ZigBee® Switch and Power
ZC06 is a robust ZigBee enabled
dimmable LED tube. It has a four level
control function via a wireless controller. It is
a long life and light weighted power
consumption which conserve 80%
comparing to the conventional light tubes.
ZC06 utilizes SMT LEDs with its max. 1080
lumen and 50,000-hour lamp life.
Main Features
Technical Parameter
ZigBee® Switch and Power
ZD01A/BWireless Curtain Controller
Main Features
Technical Parameter
ZD01A/BCurtain Controller
Product Model
• ZigBee device type:Shade
• Carrying the functions of on/off and level control
• Compatible with ZigBee HA profile• Support wireless or manual operation• Two types: curtain and drape• Easy installation
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
85mm × 54.3mm × 21mmProduct Dimension:
IEEE 802.15.4 / ZigBeeProtocol:
<30WPower Consumption:
DC 12V, 3APower Supply:
ZD01 is a wireless curtain with toggle & level
controller and can bind with the devices carrying
the functions of witch/level control and through
these devices, users can control ZD01. When Z-
D01 is installed, users can either use remote
controller, scheme setting or time setting to
control the open/close of the curtain to make a
easier life.
ZD01A: Curtain
ZD01B: Drape
ZigBee® Switch and Power
Z800Power Socket with power consumption
monitoring
Main Features
Technical Parameter
Z800Power Socket with Power Consumption Monitoring
Z800 is an electrical outlet that allows off site / remote control. When there’s any device plug in Z800, users can monitor the load current, voltage and power consumption of the device and determine if the device is overloaded and it can work with ZiG-BUTLER for energy management.
Z800 can bind with devices carrying the functions for on/off control. and by controlling the through /off of the relayto control the enrolled devices.
Z800 has a manual switch and can carry out manual control. It is IEEE802.15.4 ZigBee HA compliant and is applicable in any ZigBee HA Protocol network. SE Profile Z800 is also available.
@operating mode <35mA
@standby mode <30mAConsumption:
Max. 2300Watt Resistive Load:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
IEEE 802.15.4 / ZigBeeProtocol:
93.5mm x 62mm x 41mm (main part)Product dimension:
Up to 50 meters indoorCommunication Range:
2.4~2.4835 GHzFrequency:
~250 VAC max. /50/60 HzInput Power
• ZigBee device type: Mains Power Outlet (HA profile)
Load Control Device (SE profile)
• Carrying on/off function• Support Smart Energy management• Compatible with either ZigBee HA or SE profiles• Overload protection• (optional) extra memory (eeprom 128kB)• Can be controlled by any ZigBee compatible remotes• Various countries power sockets available• In-built ZigBee router feature.
Z800: power , energy, current Z800: power , energy, current
and voltage monitoring (For HA profile)and voltage monitoring (For HA profile)
Product Model
Socket type selectionSocket type selection
ZigBee® Switch and Power
Z800RRange Extender
Main Features
Technical Parameter
Z800RRange Extender Power Socket
Z800R is a dedicated network range extender. It is designed to have electrical outlet which inherent the look of its Z800 neighbor. The difference between them is that Z800R doesn’t have power consumption monitoring and doesn’t support wireless on/off control. User may use it as a simple range extender. Z800R has a manual switch to toggle the AC output to switch appliances attached. It is IEEE802.15.4 ZigBee HA compliant and is applicable in any ZigBee Pro HA Protocol network.
@operating mode <35mA
@standby mode <30mAConsumption:
Max. 3500WattResistive Load:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
IEEE 802.15.4 / ZigBeeProtocol:
93.5mm x 62mm x 41mm (main part)Product dimension:
Up to 50 meters indoorCommunication Range:
2.4~2.4835 GHzFrequency:
85~265 VAC 50/60 HzInput Power
• ZigBee device type: Range Extender (HA profile)
• Compatible with either ZigBee HA• Overload protection• (optional) extra memory (eeprom 128kB)• Various countries power sockets available
Socket type selectionSocket type selection
ZigBee® Wireless Adaptable Switch
Z801Rx/TxWireless TX/RX Switch
Main Features
Technical Parameter
Z801Rx/TxTX/RX Switch Module
• ZigBee device type:–Z801Rx : On/Off Output –Z801Tx : On/Off Switch/Binary Sensor
• Support ZigBee HA profile• Compatible with power loading controller, smart key and
wall switches.• Z801Rx has a built in ZigBee router.• 2 pcs AAA batteries (Z801TX) or 5V – 24V DC(Z801 TX
/RX)• Z801TX batteries can support its operation for three years. • Z801Tx has three input channels to configure open /close
/switch /delay toggle input port • Z801Rx has 1 output channel capable of driving external
relay
Max. 50 Watt, 10AResistive Load:
Z-801R05: DC 5VZ-801R12: DC 12VZ-801T03: 2 AAA BatteriesZ-801T05: DC 5V
Power Supply:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
66mm × 48mm × 18mmProduct dimension:
IEEE 802.15.4 / ZigBeeProtocol:
Up to 50 meters indoorCommunication Range:
Z801 is a set of wireless switch based on
ZigBee technology. Z801Rx has one
auxiliary DC output power for external
electrical devices ( e.g. Cameras, DC lamps
etc.); Z801Tx includes three input channels
for external switch connections. It turns
conventional on/off switch or binary sensor
into ZigBee wireless device.
It can be installed in a wall enclosure box to
become in-wall mounted. Z801TXB can be
wired with a magnetic contact or some sort
to become a wireless security zone sensor.
Product Model
Z801R05: On/Off Output, DC 5V
Z801R12: On/Off Output, DC 12V
Z801T03: On/Off Switch/Binary Sensor,
3V Battery
Z801T05: On/Off Switch/Binary Sensor,
DC 5V
17
ZigBee® IAS Adaptable Zone Transmitter
Z801TxBSensor Signal Tx module
Main Features
Technical Parameter
Z801TxBSensor Signal Tx Module
• Fully IEEE 802.15.4 compatible
• Utilizes 2.4GHz ISM band, total 7 Channels
• Power by 3V battery
• Build-in antenna
• Up to 50 meter transmission distance
• Easy to operate and configure
3V (2 x AAA battery)Power Supply:
@operating mode <35mA
@standby mode <3uAConsumption:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
66mm × 48mm × 18mmProduct Dimension:
IEEE802.15.4 (ZigBee Pro)Protocol:
Up to 50 meters indoorCommunication Range:
Z801TxB is the sensor signal
transmitter module. It connects up to 3 IAS
Zone sensors and transmits command
signals to the enrolled or bound CIE (the
IAS control center) to notify the user. It
utilizes 2.4GHz ISM band transceiver and is
fully compatible with ZigBee Pro. It is
communicable with ZigBee network routers,
coordinator and end devices.
Product Model
Z801TxB03: 3V DC
Z801TxB05: 5V DC
18
ZigBee® IAS Adaptable Zone Transmitter
Z801WLSZ801WLSZigBee flood sensorZigBee flood sensor
Z801WLSZigBee Flood Sensor
Z801WLS is attached with a flood sensor for
flood sense and reporting. It reports to a
security mains controller (CIE) in the
network to setoff alarms and triggers other
devices for further control. Z-801WLS can
be attached with other sensors for various
deployments.
Z801WLS is fully Zig-Bee Pro compliant. It
communicates with the router, coordinator
and end-devices in the network.
Main Features
• Fully IEEE 802.15.4 compatible
• Utilizes 2.4GHz ISM band, total 7 Channels
• Power by 3V battery
• Build-in antenna
• Up to 50 meter transmission distance
• Easy to operate and configure
Technical Parameter
3V (2 x AAA battery)Power Supply:
@operating mode <35mA
@standby mode <3uAConsumption:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
66mm × 48mm × 18mmProduct Dimension:
IEEE802.15.4 (ZigBee Pro)Protocol:
Up to 50 meters indoorCommunication Range:
ZigBee® Power Switch
Z802Two Way Wireless Switch Module
Main Features
Technical Parameter
Z802Two Way Wireless Switch Module with Mechanical Switches
• ZigBee device type:On/Off Output
• Compatible with ZigBee HA profile
• Through mechanical switches and ZigBeecommand to control two ways switches
Z802 is a RF control module applicable in stair lamp, garage lamp or street lamp wireless control. It consists of two inner controlled switches and two external mechanical switches that make up the on/off control of the lights and carry out the wireless control of light balls.
It is IEEE 802.15.4 ZigBee HA profile compatible, applicable to any ZigBee HA compatible network and can communicate with Router, Coordinator and other end devices in the network.
@standby mode <3mAConsumption:
@operating mode <6mA
Max. 1320 WattResistive Load:
85~265V AC 50/60HzInput Power:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
70mm × 59mm × 17mmProduct dimension:
IEEE 802.15.4 / ZigBeeProtocol:
Up to 50 meters indoorCommunication Range:
ZigBee® Power Switch
Power Extension Sockets with Power Consumption Monitoring
Main Features
Technical Parameters
Z803Power Extension Sockets
• ZigBee device type: Mains Power Outlet• Equipped with router device• Equipped with switch function• Supports Smart Energy power consumption
management. • Compatible with ZigBee HA & SE Profiles.• Power consumption management
• Current overload protection
• Manual switch for disable the RF function and power supply
• Easy to install and use
• Can be controlled by any ZigBee HA compatible remotes
• Full range of country sockets and plug type available
Z803 is an extension cord with 3 sockets that
can be controlled via manual switch and
wireless application. There are three power
relays corresponding to each socket, and
each socket can be controlled individually.
This product ensures the safety for users and
the device itself according to the energy value
it detects. It can also work with ZiG-
BUTLER to do energy management.
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
IEEE 802.15.4 / ZigBeeProtocol:
310mm x 50mm x 36mmProduct Dimension:
Up to 50 meters indoorCommunication Range:
220V 1.0WPower:
2.4~2.4835 GHzFrequency:
10A/220VAC ; 15A/110VResistive Load:
85~265 VAC 50/60 HzInput Power:
Z805Wireless Switch Control Unit
Technical Parameters
Z805Switch Control Unit
Main Features
• ZigBee device type ︰
: On/Off output (HA profile)
: Load Control Device (SE profile)
• Compatible with either ZigBee HA or SE Profiles
• Manual override switch and ZigBee wireless one output controls
• (optional) extra memory (eeprom 128kB)
<5mA @RxConsumption:
<5mA @Tx
Max. 3520 WattResistive Load:
AC Voltage 85~265VInput Power :
< ±3%Measurement Accuracy:
Temperature -10~50℃
Humidity max. 95%RHOperating Ambient:
51 mm x 51 mm x 16mm Product Dimension:
Protocol:
Communication Range:
IEEE 802.15.4 / ZigBee Pro
Up to 80 meters indoor
Product Model
Z805PE: power & consumption monitoring
Z805UI: voltage & current monitoring
Z805 is a switch control unit based on ZigBee Pro. It is
equipped with load inspection and load control feature
for HA and SE network.
In a Home Automation network it receives switch signal
from its coordinated wireless switch.
Z805 is also available in SE Profile. In the SE network,
Z805 is a simple metering which contains Simple
Metering and Load Control/Demand Response features.
It receives event scheduling signals and returns load
information to the network.
ZigBee® Power Switch
Z806Wireless Switch Control Unit
Main Features
Z806Switch Control Unit
• ZigBee device type:On/Off Output (HA Profile)
: Load Control Device (SE Profile)
• ZigBee high power output switch
• Compatible with ZigBee HA and SE Application Profile
• Equipped with router device
• Two-output relay controls individual device.
• Compact size that can be installed in power junction box
Z806 is a control unit for controlling device switch
with high power. Its two outputs can be controlled by
received ZigBee commands to realize wireless control for
home appliances.
Z806 output unit is defined as an output device either for
ZigBeeTM Home Automation network. Load control device
for ZigBeeTM Smart Energy network is also available.
This device utilizes 2.4 GHz ISM band. It is entirely
compatible either with ZigBee HA or SE Profile and
communicates with routers, coordinator, and end devices
in a network.
@standby mode <24mAConsumption:
@operating mode <24mA
Max. 2200 WattResistive Load:
85~265V ACInput Power :
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
68mm × 48mm × 16.5mmProduct Dimension:
IEEE 802.15.4 / ZigBeeProtocol:
Up to 50 meters indoorCommunication Range:
Technical Parameters
ZigBee® Power Switch
ZigBee® Socket & Switch
Z807AZ807AWall SocketWall Socket
Z807ASwitch socket
>100,000 relay switchingLife:
Max. 3520W one socket w/ ZigBeeResistive load:
IEEE802.15.4(ZigBee Pro)Protocol:
Temperature -10~50℃Operating Ambient
Humidity Max. 95%RH
105mm x 52mm x 47mmProduct dimension:
Up to 50 metersCommunication Range:
-36dBm ~ 4 dBmTx power:
2.4~2.4835 GHzFrequency:
5mA @ operationConsumption:
85~265 VAC 50/60 HzInput Power:
Z807A is a highly reliable switching device for many
home appliances. Z-807A is fully IEEE802.15.4 ZigBee
HA and SE protocol compliant.
In HA network, Z807A is an On/Off Output device.
Only one output can be switched via a logical bound
controller device. It reads power consumption and
returns to the application software –ZiG-BUTLER
allows load current and voltage or power and energy.
In the SE network, Z807A is a Simple Metering device
and also a Load Control/Demand Response device.
Main Features
• ZigBee device type:-HA: On/Off Output
• Smart Energy compatible device is also available
-Simple Metering & Load Control/DR
• Only one socket controllable via manual override switch and ZigBee wireless switch. Other socket is a straight through
• (optional) extra memory (eeprom 128kB)• Built-in ZigBee router
Technical Parameters
Z807BControllable Wall Socket
24mA @ operationConsumption:
Max. 2200Wone socket w/t ZigBeeResistive Load:
IEEE802.15.4(ZigBee Pro)Protocol:
Temperature -10~50℃Operating Ambient:
Humidity max.95%RH
85mm x 55mm x 24mmProduct Dimension:
Up to 50 meterCommunication Range:
-32dBm ~ 3 dBm (software tunable)Tx power:
2.4~2.4835 GHzFrequency Band:
>100,000 relay switchingLife:
85~265 VAC 50/60 HzInput Power:
Z807B is a highly reliable switching device for
many home appliances.
Z807B is fully IEEE802.15.4 ZigBee Pro based HA
Profile compliant and uses 2.4GHz ISM transceiver
module.
It acts as a router in ZigBee HA network and
permits other devices to join to the network. It
communicates with other end-devices and routers
wireless.
• ZigBee device type:HA: On/Off Output • Compatible with ZigBee HA Application Profile
• both sockets controllable via manual override switch and ZigBee wireless switch.
• (optional) extra memory (eeprom 128kB)• Built-in ZigBee router
Main FeaturesZ807B
Wall Socket
Technical Parameters
ZigBee® Socket & Switch
Z810Switch Crtl Unit with Consumption Display
Z810A/BSwitch Control Unit with Consumption Display
Z810 is a switch control and load display
unit for energy, power, current and voltage
readings. It can be controlled by its manual
override switch or by a logically paired wireless
switch. It also supports and transmit requested
consumption readings to a targeted PC installed
with application software or Netvox ZiG-
BULTER. Z810B utilizes TI SoC and Z810B
utlizes Ember SoC.
• ZigBee device type:HA: On/Off Output
• Smart Energy compatible device is also available• Compatible with ZigBee HA Application Profile
• Manual override switch and ZigBee wireless two ways switch
• (optional) extra memory (eeprom 128kB)• Built-in ZigBee router
Z810: 20A 4400WResistive Load:
85~265VAC 50/60HzInput Power :
Up to 80 metersCommunication Range:
5mA @ operationConsumption:
>100,000 relay switchingLife:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
94mm × 36mm × 41mmProduct Dimension:
IEEE 802.15.4 / ZIGBEE PROProtocol:
Z810A < ±3% Z810B < ±1% Measurement Accuracy:
Main Features
Product Model
Z810A: max. 20A res. loadZ810B: max. 20A res. load
Technical Parameters
ZigBee® Socket & Switch
Z811Wireless Switch Control Unit
Z811Switch Control Unit
Z811 is a high reliable on or off output switch
device. It receives On/Off/Toggle control signals
from logical bound wireless device for home
automation control.
Z811 is fully IEEE802.15.4 ZigBee Pro based HA
Profile compliant and uses 2.4GHz ISM transceiver
module. It acts as a router in ZigBee HA network
and permits other devices to join to network.
<30mA @ operationConsumption:
Max. 2200 Watt @each outputResistive Load :
85~265V ACInput Power :
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
105mm x 55 mm x 18 mmProduct Dimension:
IEEE802.15.4(ZigBee Pro)Protocol:
Up to 200 metersCommunication Range:
Technical Parameters
Main Features
• ZigBee device type:HA: On/Off Output • Compatible with ZigBee HA Application Profile
• ZigBee wireless four ways switch, with the combination of #1, #2, #3, #4, or #1, #1#2, #1#2#3, #1#2#3#4
• (optional) extra memory (eeprom 128kB)• Built-in ZigBee router
ZigBee® Socket & Switch
Z812AWireless Switch Module
Z812A
Technical Parameters
Two Way Wireless Switch Module with Mechanical Switches
Z812A is a highly reliable switching control device
consisted 4 two way switches. One of the four is the
straight through cabled relay mechanical switch
and could also receive control signal from a logical
bound wireless switch. The other three switches
can control other switching device wirelessly.
Z-812A is fully IEEE802.15.4 ZigBee Pro based HA
Profile compliant and uses 2.4GHz ISM transceiver
module. It acts as a router in ZigBee HA network
and permits other devices to join to network.
Main Features
• ZigBee device type:HA: On/Off Output • Compatible with ZigBee HA Application Profile
• A four to eight combinations two-way switches with ZigBee wireless or manual control
• Power supply: 110 ~ 230V AC
• (optional) extra memory (eeprom 128kB)• Built-in ZigBee router
@standby mode <30mAConsumption:
@operating mode <35mA
Max. 3860 WattResistive Load:
110~230V ACInput Power :
Temperature -10~50℃Humidity max. 95%RH
Operating Ambient:
44mm × 35mm × 69mmProduct Dimension:
IEEE802.15.4(ZigBee Pro)Protocol:
Up to 50 metersCommunication Range:
ZigBee® Switch & Power
Z711/712/713Humidity and Temperature Sensor
Z711/712/713Wireless H/T sensor
Z711:IndoorZ712:OutdoorZ713:Outdoor(Z713 is equipped with solar panel and UV sensor (optional) and AA rechargeable batteries), applicablewith ZL01 series device.
Product Model
Main Features
Technical Parameters
Z711/712/Z713: 2 AA batteriesPower Supply:
Z711 /Z712:<2uA; Z713: <15uA@standby mode:
Z711 /Z712:<40mA; Z713: 120mA@receiving mode:
Z711 /Z712:<40mA; Z713: 120mAConsumption @transmitting mode:
Z711:112mm x 34mm x 17mmZ712:222mm x 130mm x 195mmZ713:234mm x 155mm x 217mm
Product Dimension:
Temperature:+/- 0.5℃Humidity:+/- 4.5%
Accuracy:
Humidity max. 10~90%
Temperature -20~60℃Operating Ambient:
NDRMonitoring Method:
Z711:50 m / Z712:30m / Z713: up to 200meters
Communication Range:
Z711/712/713 is humidity and temperature sensor based
on ZigBee Smart Home Automation standard. It is used for
detecting indoor and outdoor temperature and humidity and
send out detected data to control center via wireless network.
Z713 is equipped with solar panel and UV sensor (optional)
and AA rechargeable batteries. Z711/Z712/713 do not need
any wiring for installation. It only needs 2 AAA batteries to
support its power. It can be mounted on wall and
everywhere. Users do not need to operate this device, it will
send the detected data to control center by itself. Humidity
and temperature data can also be displayed on control center
or Z868 console, user can check on the data from internet.
• ZigBee device type:Temperature Sensor • Fully IEEE 802.15.4 & ZigBee HA compliant• High accuracy +/- 0.5 ℃, +/- 4.5%RH • Indoor and outdoor type available• Dust cover available for outdoor type• Compact size• Low power consumption• Low battery alert
ZigBee® Ambient Sensor
Z716A/B
Z716LCD Display ambient sensor
@standby mode:
<40mA@receiving mode:
<40mAConsumption @transmitting mode:
112mm x 34mm x 17mmProduct Dimension:
Temperature:+/- 0.5℃Humidity:+/- 4.5%
Accuracy:
Humidity max. 10~90%
Temperature -10~50℃Operating Ambient:
Non-Destructive Read (NDR)Testing Employed:
2 x AA batteriesPower Supply:
50 mCommunication Range:
ZigBee® Ambient Sensor
Humidity and Temperature Sensor with LCD Display
Main Features
Z716 is a temperature and humidity display.
The data can be sent to a data center wirelessly. It
has a build-in RTC clock circuit and data-reading
storage.
Z716A detects temperature and humidity
Z716B detects temperature only.
Z716 is designed to comply ZigBee Home
Automation Profile utilizes ZigBee wireless
transmission without the need of cabling. Z716
uses 2 AA batteries.
• ZigBee device type:Temperature Sensor • Fully IEEE 802.15.4 & ZigBee HA compliant• High accuracy +/- 0.5 ℃, +/- 4.5%RH • Compact size• Low power consumption• Low battery alert
Technical Parameters
Z716A: Temp/Humidity Sensor& Reports;
Z716B: Temp Sensor & Reports
Product Model
Z725A/B/R
Z725Far range ambient sensor
120mA@receiving mode:
120mAConsumption @transmitting mode:
Temperature:+/- 0.5℃Humidity:+/- 4.5%
Accuracy:
Humidity max. 10~90%
Temperature -20~60℃Operating Ambient:
NDRTesting Employed:
2 x 10AH Li rechargeable batteriesSolar panel power supply 3.5 ~ 5.5 VDC
Power Supply:
Up to 700 metersCommunication Range:
Far Range Ambient Sensor
Z725A: conventional ambient sensingZ725B: general sensing applicationZ725R: outdoor ZigBee range extender onlyonly
ZigBee® Ambient Sensor
Z725 series is equipped with ZigBee router
for extending coverage area. They contain high
solar battery capacity to ensure zero downtime
operation.
Z725A has built-in temperature and
humidity sensor which report readings.
Z725B can be attached with multi-sensor for
general sensing application such as temperature,
UV, soil moisture, current or voltage sensing.
Z725R is solely a range extender router
without sensors.
Main Features
• Z725A: High accuracy +/- 0.5 ℃, +/- 4.5%RH • Z725B: 3 ADC ports and 1UART and SPI
connection provided (selectable)• Fully IEEE 802.15.4 compliant• Equipped with solar powered battery• Far range transmission up to 700meters• Low battery alert
Product Model
Technical Parameters
32
ZigBee® Remote
Z501A:upkey,downkey,on/off,emergency, arm and disarm
Z501B: 2 couple of on/off switchesZ501C :Dimmer Switch & On/Off Switch
Z501A/B/C4-key remote
Main Features
Technical Parameters
Z501A/B/C4-key Remote
Product Model
Z501 is a programmable 4-key remote based on ZigBee HA
standard. It can join in ZigBee network and bound with other
device. It controls the devices bound with itself by
transmitting and receiving ZigBee control signal. User can
designate and program each key based on their needs. Z501 is
equipped with the newest energy saving technology, 1 button
battery can last for years. It is entirely compatible with IEEE
802.15.4 ZigBee HA standard and suitable for joining in any
ZigBee HA standard network.
0.5uAStandby Current:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
53mm × 35mm × 15.2mmProduct Dimension:
Up to 50 meters indoorCommunication Range:
1 LEDStatus Indication:
4Button quantity:
IEEE802.15.4 PHY/MAC support2.4 ~ 2.4835 GHzTx power:0 dBmRx sensitivity:-90 dBm
RF parameters:
IEEE 802.15.4 / ZigBeeProtocol:
3V CR2032 button cell batteryPower supply:
• ZigBee device type:
–A : Level control/ IAS Ancillary Control (0001/0401)Level control /Emergency/disarm/arm
–B : On/Off Switch (0000) switch function–C : Level control (0001) switch function/Level control function
• Fully IEEE 802.15.4 Compliant• 4-key smart operation• One key corresponds to one logic ZigBee device.• Low power consumption• Compatible with ZigBee HA Profile• Bind or unbind devices• Programmable keys for different control function.• LED indication
33
Z503ZigBee Remote
Main Features
Technical Parameters
Z503Multifunctional Remote
• ZigBee device type: IAS Zone/Remote Control• Compatible with ZigBee HA Profile• Long battery life• Innovative Smart Home remote for configuring and
controlling local smart home appliances.• Control all you can see • Preset scenario, turn off all devices, dimming, control
power socket, control curtain, delay control, emergency button function, arm and disarm security
3V CR2032 button cell batteryPower Supply:
@receiving mode 34mAConsumption:
@transmitting mode 34mA
121.4mm × 45mm × 13mmProduct Dimension:
Humidity max. 95%RH
Temperature -10~50℃Operating Ambient:
IEEE 802.15.4(ZigBee)Protocol:
@standby mode 2uA
Up to 50 metersCommunication Range:
IEEE 802.15.4 / ZigBeeProtocol:
Z503 is a programmable multifunctional remote based on
ZigBee HA profile standard . It can preset scenario, turn off
all devices, dimming, control power socket, control curtain,
delay control, emergency button function, arm and disarm
security. User can designate and program each key based on
their needs.
Z503 is equipped with the latest energy saving technology,
one button battery can last for months. It is entirely
compatible with IEEE 802.15.4 ZigBee HA standard. It is
suitable for joining in any ZigBee HA standard network
ZigBee® Remote
ZigBee® RF Module
Z100RF Module
Z100ZigBee® RF module
Z100TC V5.3Equipped with Chip-antennaZ100TI V5.3Equipped with IPEX connector
Z100 is a surface-mounted module, user can establish
IEEE 802.15.4 system using this module for short time to
market and the cost effective. Use this system will help user
minimize development effort and skip the complicated RF
design stage and the high-cost testing and development. 2
module types are available: Z100TC chip-antenna and
Z100TI IPEX connector. Both supports pre-program
communication range through network protocol stack.
*Modules come unloaded or with firmware of ZigBee
Coordinator or Router
Z100 meets the standards of EN 300 440, US FCC
CFR47 Part 15 and Japan ARIB STD-T66 standard.
• High performance and low power consumption 8051 MCU
• 2.4 GHz IEEE 802.15.4 standard transceiver
• Excellent receiver sensitivity
• Wide Power Voltage Range( 2.0V - 3.6V DC)
• Digital RSSI/ LQI support and strong DMA function
• Equipped with battery detection and temperature sensor
• Two programmable USART available, supports several serial
protocol.
• Equipped with 1 MAC timer compatible with IEEE 802.15.4 , 1
general 16-digit timer and two 8-digit timers.
Main Features
Technical Parameters
-90 dBmReceiver Sensitivity:
16mm × 22mm × 2.85mmProduct Dimension:
Humidity max. 95%RH
Temperature -10~50℃Operating Ambient:
@standby mode0.8uA
@operating mode 190uA
@transmitting mode 33mA
@receiving mode 33mAConsumption:
16Channel :
2.0 to 3.6 VDCWorking Voltage:
2.4-2.4835 GHzFrequency:
250 KbpsData Transmission Rate:
Up to 100 meters outdoorCommunication Range:
-3 dBm to 0 dBmOutput Power:
Product Version
ZigBee®RF module
Z100ARF Module
Z100AC V1.1Equipped with Chip-antennaZ100AI V1.1Equipped with IPEX connector
Main Features
Technical Parameters
-97 dBmReceiver Sensitivity:
16mm × 22mm × 2.85mmProduct Dimension:
Humidity max. 95%RH
Temperature -10~50℃Operating Ambient:
@standby mode 0.8 uA
@operating mode 110 uA
@transmitting mode 34 mA
@receiving mode 28 mAConsumption:
16Channel :
2.0 to 3.6 V DCWorking Voltage:
2.4-2.4835 GHzFrequency:
250 KbpsData Transmission Rate:
Up to 150 metersCommunication Range:
-28 dBm to 4 dBmOutput Power:
Product Version
Z100A is ZigBee Pro/IEEE 802.15.4 solution, cost effective and low development cost. . It minimize development effort and skip the complicated RF design stage and the high testing and development cost. 2 module types are available: Z100AC with chip-antenna and Z100AI IPEX connector.
*Modules come unloaded or with firmware of ZigBee
Coordinator or Router.
• High performance and low power consumption 8051 MCU
• 2.4 GHz IEEE 802.15.4 standard transceiver
• Excellent receiver sensitivity
• Wide Power Voltage Range( 2.0V - 3.6V DC)
• Digital RSSI/ LQI support and strong DMA function
• Equipped with battery detection and temperature sensor
• Two programmable USART available, supports several serial
protocol.
• Equipped with 1 MAC timer compatible with IEEE 802.15.4 , one
general 16-digit timer and two 8-digit timers.
Z100AZigBee® RF module
ZigBee® RF Module
Z110PRF Module with Power Amplifier
Z110PZigBee RF module
Main Features
Technical Parameters
Z110PTC V1.1: Chip-antennaZ110PTI V1.1: I-PEX connector
<=-96dBmReceiver Sensitivity:
@standby mode <2mA
Humidity max. 95%RH
Temperature -10~50℃Operating Ambient:
20.5mm × 26.6mm × 3.7mmProduct Dimension:
@transmitting mode <120mA
@receiving mode <40mAConsumption:
16Channel:
2.0 to 3.6 V DCWorking Voltage:
2.4-2.4835 GHzFrequency:
250 KbpsData Transmission Rate:
Up to 1200 meters outdoorCommunication Range:
<=16dBmOutput Power:
Z110P is a surface-mounted module, user can establish
IEEE 802.15.4 system using this module for quick to market
release, cost effective and low development cost. Use this
system will help user minimize development effort and skip
the complicated RF design stage and the high-cost testing
and development. Z110P has 16dBm output power to realize
the communication up to 1200 meters outdoor. There are 2
types of module type available at the moment: Z110P TC
chip-antenna and Z110P TI IPEX connector. The 2 types
supports pre-program communication range through
network protocol stack .
*Modules come unloaded or with firmware of ZigBee
Coordinator or Router .
Product Version
• High performance and low power consumption 8051 MCU
• 2.4 GHz IEEE 802.15.4 standard transceiver
• Excellent receiver sensitivity
• Wide Power Voltage Range( 2.0V - 3.6V DC)
• Digital RSSI/ LQI support and strong DMA function
• Equipped with battery detection and temperature sensor
• Two programmable USART available, supports several serial
protocol.
• Equipped with 1 MAC timer compatible with IEEE b02.15.4 , one
general 16-digit timer and two 8-digit timers.
• 16dBm Output Power
• -96dBm Receiver Sensitivity
Z103A or Z103BZigBee USB Interfacing Module
Z103A/B
Standard USB 5V DCPower Supply:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
63.5mm x 27.5mm x 10.5mmProduct Dimension:
100 mCommunication Range:
-97 dBmReceiver Sensitivity:
7 Ch for coordinator and 16 Ch for routerChannel:
2.4 ~ 2.4835 GHzFrequency:
End-user pack: (may purchase with ZiG-BUTLER)
Z103BR : a routerZ103BC : : a coordinator
Application Developer pack:Option 1:
Z103AR: a ZigBee router (ZCL incl. in FW)Z103AC: a ZigBee coordinator (ZCL incl. in FW)
Option 2: either Z103BC or Z103BR plus aZBHA SDK (deriving ZCL) & documentation
Z103 ZigBee USB module provides interface between the IEEE
802.15.4 wireless standard and USB. The USB dongle can be
easily connected to the host computer for ZigBee Pro
protocol communication. This USB device communicates
with ZigBee Pro module through its analog port. Wireless
power amplifier is also available.
Netvox offers Z103 software development tool for
application software developer to shorten development time
without having to master the wireless technology, ZigBee
protocols.
Main Features
•ZigBee device type:Combined Interface
•USB bus powered/standard USB key chain size
•Serial port interface(virtual port under Windows, Linux,
Win CE)
•Chip-antenna
•Communication Range: Up to 50 meters indoor
Product Version
Technical Parameters
ZigBee® Dongle
ZigBee USB Interfacing Module
or
ZigBee® Coordinator
Z201ZigBee Coordinator/Router Main Features
Technical Parameters
Z201ZigBee Coordinator
7Channel:
12V DC, 1APower Supply:
83mm x 53mm x 24mmProduct Dimension:
Working:0~85%Storage:0~95%
Humidity
Working:0~50℃Storage:-40~70℃
Ambient : Temperature
-2 dBm ~ 0 dBm (19 dBm with PA)Output Power Range:
Up 100 meters indoorCommunication Range:
2.4 ~ 2.4835 GHzFrequency:
Z201 is a high reliability coordinator and is used in
Smart Home Automation. Coordinator is the core unit in
ZigBee network which is in charge of generating Beacon,
controlling topology formation and coordinating the flow
rate of every device in the network. In addition of being a
coordinator, Z201B has IAS and CIE function to manage
security system. ACE device can also be used for controlling
security system.
• ZigBee type:IAS Control Indicating Equipment• Support IEEE 802.15.4 / ZigBee• Support CSMA/CA hardware• LED status indication• Smart Home Automation: Every network has one
coordinator. It’s the ZigBee network initiator and joins other devices.
• ZigBee Repeater: Equipped with different firmware device used to extend network range
Product models
Z201C: SimpleCoordinator
Z201B: Coordinator with CIE
Z201R: Range Extender
ZigBee® Gateway Adaptor
Z202ZigBee TCP/IP Gateway
Main Features
Technical Parameters
Z202ZigBee TCP/IP Gateway
Z202 is a ZigBee TCP/IP Gateway equipped
with standard Ethernet interface. It is a ZigBee
network control center that stores all ZigBee
network node information.
It can be accessed by LAN and Internet via TCP/IP
to remotely control the local ZigBee command
center, or any ZigBee nodes.
It can automatically run the downloaded
intellectual scheme at any desired time.
Up to 100 meters outdoorCommunication Range:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
85mm × 54.3mm × 21mmProduct Dimension:
-28dBm ~ -4 dBmOutput Power:
2.4 ~ 2.4835 GHzFrequency:
12VDCPower Supply:
• ZigBee device type:Combined Interface
• Equipped with router device
• Compatible with IEEE 802.15.4 / ZigBee
• Support CSMA/CA hardware
• Supports TCP/IP protocol
• LED status indication
• Support ARP, ICMP, BOOTP, DHCP, IPv4, IGMP, UDP
• Remote access via ZiG-BUTLER
• Can be programmed as Coordinator
Z202CZigBee gateway/coordinator
Z202CZigBee Gateway / Coordinator
Up to 100 mCommunication Range:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
85mm × 54.3mm × 21mmProduct Dimension:
-2 dBm ~ 0 dBmOutput Power:
2.4 ~ 2.4835 GHzFrequency:
12VDCPower Supply:
Z202C is a two-in one device containing
ZigBee TCP/IP Gateway equipped with standard
Ethernet interface similar to that of Z202; and it is
also a coordinator device. It is a ZigBee network
control center that stores all ZigBee network
nodes information.
It can be accessed by LAN and Internet via TCP/IP
to remotely control the local ZigBee nodes.
Main Features
• ZigBee device type: Combined Interface
• Compatible with IEEE 802.15.4 / ZigBee
• Support CSMA/CA hardware
• Supports TCP/IP protocol
• LED status indication
• Support ARP, ICMP, BOOTP, DHCP, IPv4, IGMP, UDP
• Remote access via ZiG-BUTLER web server
• Synchronize configured setting from ZiG-BUTLER
• A Coordinator
Technical Parameters
ZigBee® Gateway Adaptor
Main Features
Technical Parameters
Z210
ZigBee Coordinator withInfrared Adapter and Security Center
38kHzInfrared:
@operating mode: 45mAConsumption:
12V DCPower Supply:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
83mm x 53mm x 24mmProduct Dimension:
Up to 70 meters indoorCommunication Range:
-25 dBm ~ 0 dBmOutput Power:
7Channel:
2.4 ~ 2.4835 GHzFrequency:
Z210 is a coordinator with infrared adaptor and
security function. It can duplicate the signal of any
infrared device (Eg.: TV, DVD…etc.) and control those
infrared device via ZiG-BUTLER by sending
correspondent infrared signals.
Z210 is equipped with security system (IAS),
and control center (CIE) function to manage security
devices. After security devices enrolled to Z210, Z210
will detect whether the security devices’ working
condition is normal or not.
Z210 will restore the last 5 alarm information
for user to check on.
•ZigBee device type:IAS Control Indicating
Equipment
•38kHz Infrared frequency
•Compatible with IEEE 802.15.4 / ZigBee
•2.4GHz ISM band transceiver, total 7
channels
•12V DC power supply
•SMA antenna
•Communication Range: 70 meters
•Easy operation and setting
ZigBee® Gateway and Adaptor
Z210 ZigBee Coordinator withInfrared Adapter and
Security Center
44
ZigBee® Gateway and Adaptor
Z-L01ARS232 & ZigBee Adaptor
Main Feature
Technical Parameters
Z-L01ARS232 & ZigBee Adaptor
• ZigBee device type:Combined Interface
• ISM frequency: 2.4Ghz
• 50 Ohm SMA antenna
• TX: 50mW (17dBm)
• RX: -96dBm
• DB9 port
• RS-232: 1200 ~ 115200bps
• USB port for data collection and power supply
• Reliable 802.15.4 wire adaptor
• Support star, tree and mesh network topology
• Communication range up to 1000 meters
Z-L01A is a industrial grade adaptor for
transfer between ZigBee network and RS-232
interface. It provides 1 RS-232 and 1 USB interface
and acts as the gateway for communication
between ZigBee network and RS-232. This adaptor
is a low power consumption, compact, easy-to-use
adaptor which provides reliable communication
between devices. User can manage and control this
adaptor via ZiG-BUTLER locally.
USB 2.0USB Port:
1200~115200bpsBaud Rate:
Up to 1000 meters outdoorCommunication Range:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
104.2mm × 54.9mm × 21mmProduct Dimension:
DB9 portPort Type:
2.4 ~ 2.4835 GHzFrequency:
12VDC or USB power supplyPower Supply:
45
ZigBee® Gateway and Adaptor
Z-L01BRS485 & ZigBee Adaptor
Main Features
Technical Parameters
Z-L01BRS485 & ZigBee Adaptor
• ZigBee device type:Combined Interface
• Equipped with router function
• ISM frequency: 2.4Ghz
• 50 Ohm SMA antenna
• TX: 50mW (17dBm)
• RX: -96dBm
• 10-pin port
• RS-485: 300 ~ 115200bps
• USB port for data collection and power supply
• Reliable 802.15.4 wire adaptor
• Support star, tree and mesh network topology
• Communication range up to 1000 meters
Z-L01B is an industrial grade adaptor for
transfer between ZigBee network and RS-485
interface. It provides 1 RS-485 and 1 USB
interface and acts as the gateway for
communication between ZigBee network and
RS-485. This adaptor is a low power
consumption, compact, easy-to-use adaptor
which provides reliable communication
between devices. User can manage and control
this adaptor via ZiG-BUTLER locally.
USB 2.0USB Port:
300~115200bpsBaud Rate:
Up to 1000 meters outdoorCommunication Range:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
104.2mm × 54.9mm × 21mmProduct Dimension:
10-pin portPort Type:
2.4 ~ 2.4835 GHzFrequency:
12VDC or USB power supplyPower Supply:
46
ZigBee® Gateway and Adaptor
Z-L01CEthernet & ZigBee Adaptor
Main Features
Technical Parameters
Z-L01CEthernet & ZigBee Adaptor
• ZigBee device type:Combined Interface
• TX: 50mW (17dBm)
• RX: -96dBm
• ISM frenquency: 2.4Ghz
• 50 Ohm SMA antenna
• 5 ~ 24 V DC Power Supply
• 10/100Mbit
• Communication Range up to 1000 meters
• USB port for data collection and power supply
Z-L01C is an industrial grade smart
adaptor for transfer between ZigBee network
and Ethernet interface. It has one USB
interface and one RJ45 Ethernet interface to
do two-way communication. PC (or other
Ethernet devices) can connect to a standard
ZigBee network through RJ45 interface
User can manage and control this adaptor
via ZiG-BUTLER locally.
USB 2.0USB port:
10/100MbitEthernet Transmission rate:
Up to 1000 meters OutdoorCommunication Range:
Temperature -10~50℃Operating Ambient:
Humidity max. 95%RH
104.2mm × 54.9mm × 21mmProduct Dimension:
RJ45 portPort Type:
2.4 ~ 2.4835 GHzFrequency:
12VDC or USB power supplyPower Supply:
47
ZigBee® Gateway and Adaptor
Z-L01DGPIO & ZigBee Adaptor
Main Features
Technical Parameters
GPIO & ZigBee Adaptor
• ZigBee device type:Combined Interface
• ISM frequency: 2.4Ghz
• 50 Ohm SMA antenna
• TX: 50mW (17dBm)
• RX: -96dBm
• Reliable and suitable for industrial use
• USB port for data collection and power supply
• 5 programmable input port and output port
• 3~24V input, 3~24V output
Z-L01DZ-L01D is an industrial grade smart adaptor
for transfer between ZigBee network and GPIO
interface. It has one USB port, five
programmable input port and five
programmable output port for two-way
communication. This adaptor is a low power
consumption, compact, easy-to-use adaptor
which provides reliable communication
between devices.
User can manage and control this adaptor via
ZiG-BUTLER locally.
USB 2.0USB port:
5-way input, 5-way outputPort Q’ty:
Up to 1000 meters outdoorCommunication Range:
Temperature -10~50 ℃Operating Ambient:
Humidity max. 95%RH
104.2mm × 54.9mm × 21mmProduct Dimension:
GPIO portPort Type:
2.4 ~ 2.4835 GHzFrequency:
12VDC or USB power supplyPower Supply:
ZigBee® Gateway and Adaptor
Z-L01EUSB & ZigBee Adaptor
Main Features
Technical Parameters
USB & ZigBee Adaptor
• ZigBee device type:Combined Interface
• Fully IEEE 802.15.4 compliant
• ISM frequency: 2.4Ghz, 16 channels
• Operable through 3rd party software
• USB port for data collection and power supply
Z-L01EZ-L01E is an smart adaptor for transfer
between ZigBee network and USB interface. It
is either a ZigBee router or ZigBee coordinator
device. It supports 2 communication modes:
Data mode, allows the terminal machine
connects to it to transmit data to the air.
Command mode, allows PC to collect network
information for ZigBee network supervision
when connect with the PC.
User can manage this adaptor via ZiG-
BUTLER installed on a PC.
104.2mm × 54.9mm × 21mmProduct Dimension:
Up to 70 meters outdoorCommunication Range:
Temperature -10~50 ℃Operating Ambient:
Humidity max. 95%RH
USB 2.0 portPort Type:
2.4 ~ 2.4835 GHzFrequency:
Standard USB power supplyPower Supply:
48
ZigBee controller-An iPhone app
ZigBee® on iPhone
ZigBee iPhone APP – is a many-to-one multi-controldevice on the palm of your hand.
It gives the iPhone user a slick control experience and proof all-in-one concept. Change controlinterface anyway you wanted and control ZigBeedevice at anywhere you like. It comes with singledevice control and many devices or scene control.It allows you flexibly customize your feature and user interface.
ZigBee Network Control
Main Features
• Innovative Smart Home remote for configuring and controlling local smart home appliances.
• User friendly icons and interfaces• Scene control and scene schedule activation• Control all you can see • Customable user interface and control• Compatible with ZigBee HA Application Profile• For ZigBee Home Automation network
iPhone appsiPhone apps
Netvox ZBHA API
Introduction to Introduction to ZBHA APIZBHA API
Netvox ZBHA API ZBHA API -ZigBee Pro based, is designed specifically for application integrator wish to develop smart home automation applications into PC or embedded into their system. The ZBHA API contains a communication interface, device class library, and device management module. ZBHA API ZBHA API helps integrator engineers greatly reduce development time and without having to master the knowledge required of ZigBee and Home Automation and be able to develop ZigBee applications based on ZigBee standard. ZBHA APIZBHA API currently supports Windows versions SDK (released), LINUX version (based on the hardware system environment may have different versions, not yet available). The Windows version API is written in VC++ environment. It is written within the standard Windows dynamic link library files; and it is completely being developed from ground up and does not rely on any 3rd party environment or document. Hence it is able to be used to run with windows environments including VB, VC, DELPHI and so on -which provide a user-friendly environment and easy to use.
To master in sending and receiving data frame in ZigBee network may be a stumbling stone to developers. Thanks to Netvox engineers in bringing forth such solution.
Use Netvox ZBHA API ZBHA API in combination with Netvox ZigBee USB Adapter or ZigBee EthernetGateway, you can easily talk to the ZigBee device, for instance, to switch on the light with a very simple coding ““aLight.turnonaLight.turnon()()”” function.
ZBHA API Framework:ZBHA API Framework:
API FeaturesAPI Features
• Device search
• Device management
• Device control
• Device binding
• Mode configuration & apply
API ComponentsAPI Components
• Communications device drivers
• Communication device driver library
(for communication with ZigBee USB
Adaptor or ZigBee Ethernet Gateway)
• Device Management library
• ZigBee HA device class library
(Lighting, HVAC, IAS part of the On / Off Light, IAS CIE, and all other device types)
• API Developer Guide
• Sample source code (includes all the features of each device class)
50
ZigBeeZigBee Control CenterControl CenterZiGZiG--BUTLERBUTLER
Main Features
ZiG-BUTLERZigBee Network Control Center
• Manage, Search, and Control ZigBee devices
• Rename the device
• Display device message
• Control home appliance under the setting for scenario
• Smart Schemes programmable
• Remote access via TCP/IP
• Network tree diagram display
• Bound device tree diagram display
• Compatible with HA Profile
• Built based on ZigBee Smart Home Profile
What is ZiG-BUTLER
Netvox ZiG-BUTLER™ is a application
software designed for PC to control
ZigBee HA network devices. It
functioned as a monitor center or a
auxiliary management interfaces to
user. This software supports a visible
interface which allows users receiving
the information from all the devices,
knowing current status, setting and
controlling devices by hand anytime.
Incorporated with Netvox ZiG-
BUTLER™ PC based control center,
users can connect with it through IE
browser or other PC to get information
from this software while stay outside.
Easily and convenient to control the
devices no matter where users are.
Users can easily install this software by following the instruction. This software supports upgrade
online and auto-copy data. Besides, the function of recording information is also equipped with Netvox
ZiG-BUTLER™, which allow users realize every operation and event completely by viewing log. Netvox
ZiG-BUTLER™ also supports the function of scenery editor which allows users set up different status
by identify different scenery, such as “Nighttime Sleep” or “Daytime Out”. This software can be set by
time through scheme or rule, users can program the setting; the equipments will perform according to
users’ setting even if users are not at home for a period.
ZigBee® Software
ZigBee location and tracking system
ZigBee® Location and Tracking System
ZigBee is a wireless accurate positioning system which can be used to compensate what GPS can not do for indoor positioning. ZigBee wireless tracking system is achieved based on the signal strength for positioning accuracy which meet the user's positioning needs and for a variety of location-based applications scenarios.
52
ZigBee® Tracking System
ZigBee tracking system demoZigBee tracking system demo
Here let’s us show you how the ZigBee positioning system operations through a simple
network as location reader –with 8 Z201 routers to define location and a Z201B
coordinator to form a wireless network; and a Z-302D as a mobile node. A Z101 USB
interface to be connected to a computer with ZigButler or positioning software installed for
monitoring.
Z-302D
Mobile node
computer
ZigBee positioning software
Z201 router
Z101 USB DongleZ201B coordinator
MonitoringLocation Reader
Z-302D TAG
53
ZigBee location and tracking system
ZigBee® Location and Tracking System
User friendly interface displaying specific room location
Real-time tracking within the signal coverage area
High positioning accuracy, specific applications of up to 2 meters
Low power consumption mobile tag, portable
Minimum resource needed, expandable coverage area
ZigBee tracking system featureZigBee tracking system feature
Through the ZigBee positioning software, users can see the moving node (tag) changing its
location in real time. You can configure the tracking system and save the relevant
information. For more detailed information can be found in the software instruction
manual.
Figure: RealFigure: Real--time tracking displaytime tracking display
ZigBee® Environmental Monitoring
ZigBee Environmental Monitoring SystemZigBee Environmental Monitoring System
ZigBee wireless environmental monitoring system is a set of temperature and humidity, UV
intensity signal acquisition and features like wireless transmission, real-time dynamic
display, control and communications functions aggregate into one monitoring system. A
system with high integration, high reliability and low power consumption, low cost, small
size and other characteristics, easily maintain. Only the corresponding node needed to be
replaced avoiding traditional control circuit trouble, thus significantly reducing the
equipment acquisition costs, installation costs and system maintenance costs. Using the
emerging ZigBee wireless networking technology, environmental monitoring systems for
indoor and outdoor near real-time data logging. From the control room you can remotely
monitor operational status and receive notification generated by a configured threshold.
The sensor network depicts in the figure above can be deployed for a wide spread environment
monitoring which sends data collected back to its back-end server remotely through a gateway
Z202. The network uses Z725 as range extender router to relay data across the network. Z725
is also a sensor itself equipped with a solar charging system to ensure full-time power supply.
The network employs mesh network to respond to path failure supported by neighboring Z725
routers. Mobile laptop can be interfaced with Z103 USB dongle to work in the field.
Sensor Mesh NetworkSensor Mesh Network
55
ZigBee® Environmental Monitoring
There are other features other than temperature and humidity signal acquisition, the system can
also coupled with various detectors such as illumination, UV intensity, and the indoor CO,
liquefied petroleum gas concentrations, smoke levels and other parameters. For example, install
the monitoring detectors in selected areas via ZigBee routing connection to the central control
room you can monitor the area condition. When the measured point of the measurement data
exceeds a pre-set threshold, the alarm signal notifies the control room security officer who will
then take appropriate action.
ZigBee Monitoring System FeatureZigBee Monitoring System Feature
• Data acquisition :The system respond to real-time data collected from
wide-spread area and control the temperature and humidity. If out of threshold
is detected the system issues alarm accordingly..
• Chart:Graphical displays history of the temperature and humidity curves.
• Alarm: each alarm notification is configured for specific alarm type to notify
the administrator.
• Network:User may remotely monitor the network condition in near real-
time.
• Automatic control: You can control the temperature regulator system
through the application software. i.e. the system turns on or off the air
conditioning when the humility is above or bellow the pre-configured setting.
((concon’’tt) ZigBee Environmental Monitoring System) ZigBee Environmental Monitoring System
ZigBee® Environmental MonitoringMonitoring
ZigBee Urban micro-climate detection System
In recent decades, due to the rapid development of urbanization, changes in the structure of underlying surface, transportation emitting heat, building heat and other factors. The urban heat environment progressively worsened, the "heat island phenomenon" and its negative influence is increasingly prominent. At present, the outdoor thermal environment has been the growing attention to the public. ZigBee urban micro-climate detection system could benefit from ZigBee wireless transmission technology, combined with temperature and humidity sensors.
Through the connection between ZigBee network and data center –temperature/humidity
acquisition, urban micro-climate monitoring system is able to disseminated to the public
through web server. Web member may browse to view regional air temperature and
humidity report. The data center may monitor the system to ensure normal operation. The
alarm signals the administrator to take measure for any point of failure detected or
temperature and humidity exceeds a pre-set threshold.
Public UserPublic UserMonitoring Room &Monitoring Room &
Data CenterData Center
57
ZigBee® Environmental Monitoring
Urban micro-climate Detection System Feature
• Energy-saving/ Environmental protection: Temperature and humidity
probe are solar-powered, no additional power supply and schedule battery
replacement;
• Easy to Install: ZigBee wireless technology adoption, detection system and
data exchanges are all wireless and easy to install.
• Data acquisition: data acquisition of all the detection nodes for
temperature/humidity monitoring and control in real-time.
• Chart: Graphical displays history of the temperature and humidity curves.• Alarm: each alarm notification is configured for specific alarm type to notify
the administrator.
• Web reporting:Data can be browsed via web browser citizens can easily
access to current temperature and humidity report.
58
ZigBee® more on application
ZigBee OutdoorZigBee Outdoor
Energy saving and effective street management
• Level control based on sky light intensity
• Level control based on body movement
• Provides the pedestrian current location
• Energy conservation
• Extend light bulb life
• Easy to manage
• Handy
ZigBee IndoorZigBee Indoor
• Indoor or outdoor humidity and temperature sense
• Near real-time notification to the control center
• Response to real-time indoor detection and automatic air quality improvement and window or door open necessity
• Response to real-time outdoor environment
ZigBee network
Management center
The public places of the indoor environment is particularly important for the elderly, children who are vulnerable to environmental impacts
59
ZigBee Emergency AlarmZigBee Emergency Alarm
Emergency alarm system provides first aid alarm notifying the on time staffs for elderly monitoring
ZigBee for environment and energy saveZigBee for environment and energy save
Environmental control by wireless devices based on the aggregated information from the temperature, humidity & light sensor
• Utilizes wrist wear emergency button for fall detection
• Utilizes ZigBee network signal transmission
• Emergency alarm notification
• Response to instant events for no delaying treatment
• Response to special care patients in the routine care schedule
• Utilizes sensors collects temperature, humidity and light info
• Utilizes wireless equipped devices, the ZigBee mesh network relay the signal to the central control system
• Sensors can be easily installed and provides multiple sensor information for in-building condition reporting
• Adding new or relocate ZigBee sensors helps to overcome wiring problem
• The energy saving Technical is achievable by the use of data return from the sensor
ZigBee network
Light intensity control
Light control
Temp control
ZigBee® more on application
60
ZigBee Playground ManagementZigBee Playground Management
Tagging and positioning system provides risk pretension tactic and prevent being monitored
• Utilizes positioning system to for location identification
• Utilizes the Infrared sensor detecting nearby and accessing violation
• Positioning System can also be used to find family members
• Reduces admission delays
• Prevent children from getting lost
• Better company image
ZigBee Industrial ApplicationZigBee Industrial Application
Factory data line go wireless improves operating environment andmanagement efficiency
• Cabling replaced by wireless communication
• Increase productivity, reduce remodeling time
• Saving on equipment maintenance cost
• Improve environment for working staff
ZigBee® more on application
61
How to build a complete ZigBee Network?room control - home automation - smart energy
ZIGBEE® Smart Home System
Generally, a complete ZigBee network contains 3 factors: ZigBee Coordinator, ZigBee Router and End Device.
1. ZigBee Coordinator: In charge of generating network beacon, controlling the formation of network topology and coordinating the communication and flow rate of every device in the network. Coordinator is the central unit of a ZigBee network.
2. ZigBee Router: In charge of transmitting data, coordinating flow rate of some devices in the network, sending and receiving commands and data, and permitting other devices as its subsidiary device. It also acts as repeater to extend the coverage of ZigBee network. For cost-efficient purpose, we do not make individual router but enable some of the ZigBee devices to have router function. Router mode device will not only satisfy client’s need but also reduce the cost of building up network system.
3. End Device: Acts as the bottom of network topology, in charge of sending and receiving data and execute commands. However, end device does not hand over data to other devices.
Coordinator is indispensible in a ZigBee network, one network needs to have one coordinator. For quantity of routers and end devices, it depends on user’s actual needs. Below is a typical ZigBee network figure.
Appendix:ZigBee® Smart Home Device Typeroom control - home automation - smart energy
ZigBee® For Smart Home System
Z103BCZigBee Coordinator
Z201 ZigBee Coordinator
Coordinator
Z806Output Unit
ZD01A/BCurtain Controller
Z711/712/713H/T Sensor
ZA10 Gas Keeper
Z302EAsset Tag
ZA01B/C/DGas Sensor
Z302DPanic Button
Z202ZigBee TCP/IP Gateway
Z801TxSwitcher Board
Z601A/BSiren
Z503Multi-function Remote
Z803Extension Cord
Z501Simple Remote
Z800Power Outlet
ZB02A/B/CWall Switch
ZC01Dimmer
ZB01Motion Sensor
Z801RxRelay Board
Z302A/B/CDoor/Light/Window Sensor
ZA01A/02ESmoke Detector
End DeviceRouter
Netvox ZigBee Device Type & Model Number
How to build a complete ZigBee Nework?room control - home automation - smart energy
ZIGBEE® Smart Home System
There are a few subsidiary systems in ZigBee Smart Home System: Lighting, HVAC, Home Care, and Security…etc. Security is the most special application. Generally, below type of devices should be included: IAS Control and Indicating Equipment, IAS Ancillary Control Equipment, IAS Zone, and IAS Warning Device.
1. IAS Control and Indicating Equipment, abbreviated as: IAS CIE
IAS CIE is the central control and indication device in security system. It is in charge of receiving the signal sent by Zone devices and controlling ACE devices. It can also send signals to WD (Warning Device). IAS CIE is the brain and a must of the whole security system. A ZigBee security system should contain at least one device equipped with IAS CIE function and IAC CIE is usually equipped in ZigBee coordinator.
2. IAS Ancillary Control Equipment, abbreviated as: IAS ACE
IAS ACE is the remote device in a security system with the authority toaccess IAS CIE device and control IAS system. The most common ACE devices are remotes and switches…etc. IAS ACE devices can also be used as Zone Sensor.
3. IAS Zone:
IAS Zone devices can detect alarm condition in certain area and send signals to CIE devices. IAS Zone devices support two types of alarm mode: low battery alert and security system alert. The most common IAS Zone devices are motion sensors and smoke sensors…etc.
4. IAS Warning Device, abbreviated as: IAS WD
When the alarm condition of IAS CIE is triggered, IAS alarm device will send audio or visual signal as alert indication. (alarm, flash…etc.). The most common IAS WD devices are alarm and siren…etc. IAS alarm devices can also be used as Zone Sensor.
Z501
IAS ACE
ZB01
ZA01A/02E
Z302B
Z601BZ302A/CZ201B
IAS WDIAS ZoneIAS CIE
Netvox ZigBee Security System Device Type
64
CIEControl and Indicating Equipment
Eg.:Z201B coordinator
Router End Device
ACE device(Ancillary Control Equipment)
Eg.:Z501, Z503 Remote
Warning DeviceEg.: Z601 Siren
room control - home automation - smart energy
ZigBee® Smart Home System
IAS System Device Sketch
When CIE considers the data reach the limit, it will send control signal to alarm device to trigger alarm or withdraw the alarm.
When user use remote to control security system such as: arm / disarm security, set alarm condition…etc, ACE devices (remotes) will send correspondent control signal to CIE
When CIE send control signals to Zone devices such as: arm / disarm security, set alarm condition…etc, Zone device will send detected data such as temperature and humidity value to CIE.
ZONE device(Zone Device)
Eg.:ZA01 Smoke Detector and
ZB01 Motion Detector
*Note:Z201B is equipped with CIE function, it can be used as Coordinator. Z201 is the router for location system which serves the purpose of range extensionand reference points
About Netvoxroom control - home automation - smart energy
NETVOX TECHNOLOGY CO., LTD –
Netvox is a leading computer and telecommunication product manufacturer specialized in developing and manufacturing Wireless Communication Products. Netvox factory is an ISO-9001 and IECQ QC 080000 certified manufacturer. The head office is located in Tainan, Taiwan, R.O.C. and its factory is located at Torch Hi-Tech Industrial Development Zone, Xiamen, P.R.C. The newly built XIAMEN NETVOX TECHNOLOGY BUILDING covers an area of 15,600 square meters with the total investment of USD 15 million. There are more than 450 employees in the company, including 20 engineers and technicians; 20 Q.C. technicians and 30 administrative staff. Among the products 50 percent is sold abroad, and the yearly turnover is USD 30 million or so. A group of professional management staff, experienced R&D, Q.C., engineers & well-trained operators work together as a close team which leads the company to a perfect combination of maximum production capacity and superior quality and is supporting the company's sales and marketing as well.
The company has made the quality rule, quality goal and quality plan, and brought them to international level. Under the direction of quality policy "With the most effective and efficient measures to provide customers totally satisfactory products and services", all products from material procurement, production control, plastics injection to assembly, packing are under quality control. Moreover, as a result of the efficient teamwork of all company members and the economy growth and development of China, the company has gradually grown and made great success. In order to greet the 21st century, the company has devoted the development efforts to explore the high-tech telecommunication field. We will hand in hand with the friends who support and care NETVOX to create the new glory.
66
NETVOX TECHNOLOGY CO., LTD.TEL: 886-6-2617641FAX: 886-6-2656120E-mail: [email protected]: www.netvox.com.tw
NETVOX TECHNOLOGY CO., LTD (XIAMEN)TEL: 86-592-5717188FAX: 86-592-5717180E-mail: [email protected]: www.netvox.com.cn
All specifications are subjected to change with prior notice
TM