ZF Tool Kits for J Coach Axles (VIN 67000+) ZF Tool...
-
Upload
truongduong -
Category
Documents
-
view
230 -
download
0
Transcript of ZF Tool Kits for J Coach Axles (VIN 67000+) ZF Tool...
ZF Tool Kits for J Coach Axles (VIN 67000+)
©Motor Coach Industries International, Inc. and its subsidiaries. All rights reserved.ZF Tool Kits: 03-26-2364 Rev A
MCI Customer Service In the U.S.Toll Free (800) 323-1290Toll Free Fax (800) 525-4569
MCI Customer Service In CanadaToll Free English (800) 665-0155 Français (800) 546-3457Toll Free Fax (800) 872-2486
MCI Service CentersToll Free 888-912-9983
www.mcicoach.com
Information on this sheet is subject to change at the discretion of MCI and/or its affiliates. Contact your MCI parts solutions manager or customer service representative for further details.
Kit Contains
CupHandle for KT01 cupSwivel assyLong strutFlangeForkBlack nylon disc1-3/8 in. dia disc1-1/2 in. dia disc2 in. dia sleeve
2-1/8 dia. disc8 in. bolt3-7/8 in. long sleeve10 in. boltBrass nutDimpling tool8 in. boltHalf sleeveCap installation toolCap installation tool
20-04-0020 AIR DISC TOOL KITKit
These tools are required for permitted servicing and maintenance of the Bendix ADB22X brake calipers.
20-04-0046 BENDIX AIR DISC BRAKE GAUGE
TOOL
Measures pad and rotor wear
20-02-0019/2 TOWING KIT, COVER FOR ZF DRIVE AXLE
Kit
ZF Tool Kitsfor MCI J Coach Axles(VIN 67000+)
20-02-0035 in use
ZF Tool Kits for J Coach Axles (VIN 67000+)
Kit Contains Description Function
20-02-0012 TOOL-SLOTTED NUT WRENCH, FOR DRIVE AXLE
Tool used for removal/instal-lation of wheel end slotted nuts allowing access to wheel-end bearings.
20-02-0025 WRENCH-SLOT-TED NUT FOR STEER-TAG AXLE
Tool allows for removal/installation of wheel end slotted nuts allowing access to wheel-end bearings.
20-02-0026 TOOL-BRACKET, CENTERING FOR STEER-TAG AXLE
Tool assists in centering Slotted Nut Wrench 20-02-0025 during removal/instal-lation of wheel end slotted nuts.
20-02-0012 in use20-02-0040 KIT-TOOLS, WHEEL END REMOVALKit
Kit Contains Description Function
20-02-0006 TOOL-CLAMPING FORK, INPUT FLANGE
Tool holds input flange while pinion nut is being removed/installed.
20-02-0007 TOOL-SLOTTED NUT WRENCH, INPUT FLANGE
Tool used for removing/installing of pinion nut.
20-02-0008 TOOL-DRIVER, SHAFT SEAL, DIFFERENTIAL
Allows for precise installation of pinion shaft seal.
20-02-0008 in use
20-02-0006 and 20-02-007 in use20-02-0042 KIT-TOOLS, DIFFERENTIAL PIN-
ION (INPUT) SEAL SERVICEKit
Kit Contains Description Function
20-00-0067 WRENCH, 27MM ADB22X CALIPER
Tool allows for gaining proper clearance to caliper mounting bolts.
20-00-0068 WRENCH, 30MM ADB22X CALIPER
Tool allows for gaining proper clearance to caliper mounting bolts.
20-00-0042 KIT- TOOLS, CALIPER REMOVALKit
Information on this sheet is subject to change at the discretion of MCI and/or its affiliates. Contact your MCI parts solutions manager or customer service representative for further details.
Kit Contains Description Function
20-02-0010 TOOL-BEARING CUP DRIVER FOR DRIVE AXLE
Required tool to ensure correct installation position of bearing cups/outer rings.
20-02-0033 TOOL-HANDLE Tool used for handle with 20-02-0010.
20-02-0027 TOOL-BEARING CUP DRIVER FOR STEER/TAG AXLE
Required tool to ensure correct installation position of bearing cups/outer rings.
20-02-0028 TOOL-LOCATION ARBOR
Used for upright positioning of hub assembly when servicing hub seals.
20-02-0029 TOOL-OUTER SEAL DRIVER FOR STEER/TAG AXLE
Allows for proper installation of outer hub seals.
20-02-0030 TOOL-HANDLE Tool used for handle with 20-02-0029.
20-02-0031 TOOL-INNER SEAL DRIVER FOR STEER/TAG AXLE
Allows for proper installation of inner hub seals.
20-02-0034 TOOL-SEAL DRIVER, DRIVE AXLE
Allows for proper installation of inner and outer hub seals.
20-02-0035 TOOL-SEAL ALIGN AID FOR DRIVE AXLE
Prevents damage to seals and o-rings by allowing proper alignment during hub/hub carrier installation.
20-02-0032 TOOL-SEAL ALIGN AID FOR STEER/TAG AXLE
Allows for proper lining up of seals and o-rings during hub/hub carrier installation.
20-02-0034 in use
20-02-0028 in use
20-02-0010/20-02-0033 in use20-02-0041 KIT-TOOLS, WHEEL BEARING
SERVICEKit