YTMX580 Multi-Input Temperature Transmitter · Cold Junction Compensation Accuracy For T/C only ±...

GeneralSpecifications

<<Contents>> <<Index>>

YTMX580Multi-Input Temperature Transmitter

Yokogawa Electric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan

GS 04R01B01-01EN

GS 04R01B01-01EN©Copyright September 2011

9th Edition Feb. 28, 2017

The model YTMX580 Multi-Input Temperature Transmitter can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4–20 mADC signal input. In addition to temperature signals, it can also wirelessly send and receive setting parameters. Internal battery power means eliminating not only signal wires, but also power cables—this offers great installation cost reductions. Also, 24 VDC External power supply (Power supply suffix code: -B) can be specified. The communication is compliant with ISA100.11a* protocol specifications.* ISA100.11a is an industrial automation wireless communication

standard developed by the International Society of Automation (ISA) and is an international standard (IEC 62734) approved by the International Electrotechnical Commission (IEC).

Battery Pack (Battery model)Battery pack with long life lithium-thionyl chloride batteries. With the intrinsically safe type, the battery pack is replaceable in a hazardous area. Typical battery life is 6 years at 60 seconds publication period (update time) in the following conditions.*• Networkconnection:JOINstatus• Ambienttemperature:23±2°C• Devicerole:IOfunctiononly• LEDindicator:off

* Environmental condition such as ambient temperature and vibration may affect the battery life.

■ FUNCTIONALSPECIFICATIONSInputchannels:8pointsInputtypeisselectable:Thermocouples,2-,3-,and4-wireRTDs,ohms,DCmilivoltsandDCmiliamperes(4 to 20 mA, with external shunt resistors). See Table 1.Note: ExplosionproofingnotapplicableduringDCvoltsand

DCmiliamperesinput.MaximumAllowableInputvoltage±2.5VDCCategoryO(Transientovervoltage330V)

InputResistance10MΩormore

InputSignalSourceResistance(forT/C,mV)1kΩorlower

InputLeadWireResistance(forRTD,Ohm)10Ωperwireorlower

OutputISA100 Wireless (IEC802.15.4) 2.4 GHz signal.

FEATURES● LongLifeBatteryDesign

Ultra low current consumption design using two high capacity lithium-thionyl chloride batteries provide wireless operation for years.

● HighSecurityWirelessNetworkConfigurationInfrared communication between the devices for wirelessnetworkconfigurationandparametersetting.

● QuickUpdateTimeSelectable from 1 second to 60 minutes for measured process value to publish wirelessly.

STANDARDSPECIFICATIONS■ WIRELESSSPECIFICATIONSCommunicationprotocol:ISA100Wireless(IEEE802.15.4)Datarate:250kbpsFrequency:2400-2483.5MHzlicensefreeISMbandRadiosecurity:AES128bitcodifiedRFTransmitterpower:Max.11.6dBm(fixed)Antenna:+2dBiOmnidirectionaltype

■ PERFORMANCESPECIFICATIONSAccuracy

See Table 1.ColdJunctionCompensationAccuracy

For T/C only±0.5°C(±0.9°F)(addedtoaccuracywhenusingthermocouple input)

AmbientTemperatureEffect(per1.0°Cchange)See Table 2.

../submenu.htm

../../index.htm

2

All Rights Reserved. Copyright © 2011, Yokogawa Electric Corporation


GS 04R01B01-01EN Feb. 28, 2017-00

MeasurementRangeSee Table 1.

PublicationPeriod(UpdateTime)1 to 3600 sec selectable.Minimum of 2 seconds with 4 or more measuring points.

Zero-gainAdjustmentSet the amount of zero-gain point adjustment.

StatusDisplayTheRDY(green)andALM(red)LEDsindicatethefollowingstatuses:Starting,Running,Waitingto"JOIN"(network),Squawk,Alarm,DeepSleep

SensorBurnoutSelectHIGH,LOWorOFFastheconfiguration.(usesetting software)

SelfDiagnosticsAmplifierfailure,sensorfailure,configurationerror,battery alarm, wireless communication alarm and over-range error for process variables.

SoftwareDownloadFunctionSoftware download function permits to update wirelessfielddevicesoftwareviaISA100wirelesscommunication.

DeviceRoleThe following 2 device roles are supported depending on the network topology.• IOFunctiononly(IO)• IOFunctionandRoutingFunction(IO+Router)

Star

GW : GatewayIO : YTMX580 IO + R : YTMX580

IO

GW

IOIO

GW : Gateway

IO IO+Router

E01.ai

IO : YTMX580

GW

IO+R IO+RIO

IO IO

Network form Mesh

Device Role

Example network

connections and

devices

InfraredCommunicationDatarate:9600bpsDistance:Infraredsurfaceofthenearinfraredadapter should be within 30 cm

PowerSupply•BatteryModel2xprimarylithium-thionylchloridebatteries(sizeD)With battery case (batteries sold separately)

•ExternalPowerSupplyModelRatedsupplyvoltage:24VDCAllowablepowersupplyvoltagerange: 10.5to26.4VDCPowerconsumption:Max1.2W

InsulationResistanceMeasuringinputterminaltogroundterminal: 100MΩorgreater(at500VDC)

DielectricStrengthDielectricstrengththatcanwithstandthefollowingconditions

•BatteryModelMeasuringinputterminaltogroundterminal: 500VAC(50/60Hz),1min,leakagecurrentof

5 mA or lessBetweenmeasuringinputterminal: 200VAC(50/60Hz),1min,leakagecurrentof

5 mA or less•ExternalPowerSupplyModelPowerterminaltogroundterminal: 500VAC(50/60Hz),1min,leakagecurrent

of 5 mA or lessNote:Thepowersupplyterminalhasabuilt-insurge

protection device. The terminal without the surge protection device has the dielectric strength shown above.

Measuringinputterminaltogroundterminal: 500VAC(50/60Hz),1min,leakagecurrent

of 5 mA or lessBetweenmeasuringinputterminal: 200VAC(50/60Hz),1min,leakagecurrent

of 5 mA or less

■ NORMALOPERATINGCONDITION(Optionalfeaturesorapprovalcodesmayaffectlimits.)

AmbientTemperatureLimits-40to85°C(-40to185°F)As for explosion protect type, seeREGULATORYCOMPLIANCESTATEMENTS

AmbientHumidityLimits0 to 100 % RH

StorageTemperature-40to85°C(-40to185°F)

Vibration3G or less, at resonant frequencies from 10 to 2000 Hz (IEC 60770-1)

../submenu.htm

../../index.htm

3<<Contents>> <<Index>>

All Rights Reserved. Copyright © 2011, Yokogawa Electric Corporation GS 04R01B01-01EN Feb. 28, 2017-00

■ REGULATORYCOMPLIANCESTATEMENTSThis device contains the wireless module. The wirelessmodulesatisfiesthefollowingstandards.* Pleaseconfirmthatainstallationregionfulfills

a standards, require additional regulatory information and approvals, contact to Yokogawa Electric Corporation.

SafetyStandardsEN 61010-1, EN 61010-2-030CSA C22.2 No.61010-1-12CSA C22.2 No.61010-2-030-12UL61010-1,UL61010-2-030(CSANRTL/C)OvervoltageCategoryI,PollutionDegree2Indoor/Outdooruse

EMCConformityStandardsEN 61326-1 Class A Table 2 (For use in industrial locations), EN 61326-2-3

* Duringthetest,thetransmittercontinuestooperate under the electromagnetic effects of within±1%ofthespan.

EN 301 489-1, EN 301 489-17

R&TTEConformityStandardsETSI EN 300 328, ETSI EN 301 489-1,ETSI EN 301 489-17, EN 62311

The CE declaration of conformity for R&TTE for this product can be found at

<http://www.field-wireless.com/>RegulationConformityoftheWirelessModule

• FCCApproval• ICApproval• JapaneseRadioLaw(ConstructionDesign

AttestationNumber:007WWCUL0480)KoreaCertification(RadioWaveAct)

KCC-REM-YHQ-WEN007EMCandRadiocommunicationsregulatoryarrangementinAustraliaandNewZealand(RCM)AS/NZS 4268AS/NZS 2772.2EN 61326-1 Class A, Table2 (For use in industrial location)

ExplosionProtectionFM Intrinsically safe, nonincendive ApprovalIntrinsicallySafeforClassI,Division1,GroupsA,B,C&D,ClassII,Division1,GroupsE,F&GandClassIII,Division1,ClassI,Zone0,inHazardousLocations,AExiaIICNonincendiveforClassI,Division2,GroupsA,B,C&D,ClassII,Division2,GroupsF&GandClassIII,Division1,ClassI,Zone2,GroupIIC,inHazardousLocationsInputParameter:Ui=28V,Ii=135mA,

Pi=850mW,Ci=0.013μF,Li=0.24mHSensorCircuitParameter:Voc,Uo=5.88V,

Isc,Io=130.1mA,Po=191.2mW,Ca,Co=1μF,La,Lo=1mH

Ambienttemperature:–50to70°C(-58to158°F)Enclosure:NEMAType4X

CSA Intrinsically safe Approval, non-incendive ApprovalCertificateNo.:2495456IntrinsicallySafeforClassI,Division1,GroupsA,B,C&D,ClassII,Division1,GroupsE,F&G,ClassIII,Division1Non-incendiveforClassI,Division2,GroupsA,B,C&D,ClassII,Division2,GroupsF&G,ClassIII,Division1Enclosure:Type4X,IP66/IP67TemperatureCode:T4Ex ia IIC T4InputParameter:Ui=28V,Ii=135mA,

Pi=850mW,Ci=0.013μF,Li=0.24mHSensorCircuitParameter:Uo=5.88V,

Io=130.1mA,Po=191.2mW,Co=1μF, Lo=1mHAmbienttemperature:–50to70°C

ATEX Intrinsically safe ApprovalCertificateNo.:DEKRA12ATEX0068XII 1 G Ex ia IIC T4 GaInputParameter:Ui=28V,Ii=135mA,


Io=130.1mA,Po=191.2mW,Co=1μF, Lo=1mHAmbienttemperature:–50to70°CEnclosure:IP66/IP67

IECEx Intrinsically safe ApprovalCertificateNo.:IECExDEK12.0013XEx ia IIC T4 GaInputParameter:Ui=28V,Ii=135mA,


Io=130.1mA,Po=191.2mW,Co=1μF, Lo=1mHAmbienttemperature:–50to70°CEnclosure:IP66/IP67

../submenu.htm

../../index.htm

4



GS 04R01B01-01EN Feb. 28, 2017-00

TIIS intrinsically safe ApprovalBattery Model (Integral antenna)Approvalnumber:TC20543Ex ia IIC T4 XPowerSupply:Batterypack(F9915MA)orbatterycase(F9915NS)DC7.2VSensorCircuitParameter:Uo=5.88V, Io=130.1mA,Po=191.3mW, Co=1μF,Lo=1mHAmbienttemperature:–20to60°CEnclosure:IP66/IP67

Battery model (Remote antenna)Approvalnumber:TC20816Ex ia IIC T4 XPowerSupply:Batterypack(F9915MA)orbatterycase(F9915NS)DC7.2VSensorCircuitParameter:Uo=5.88V, Io=130.1mA,Po=191.3mW, Co=1μF,Lo=1mHAntennaCircuit:Uo=5.88V,Io=177.4mA, Po=349.5mWAmbientTemperature:–20to60°CEnclosure:IP20

ExternalPowerSupplyModel(Integralantenna)Approvalnumber:TC21262Ex ia IIC T4 XInputParameter:Ui=28V,Ii=135mA, Pi=850mW,Ci=0.013μF, Li=0.24mHSensorCircuitParameter:Uo=5.88V, Io=130.1mA,Po=191.3mW, Co=1μF,Lo=1mHAmbientTemperature:–50to70°CEnclosure:IP20

ExternalPowerSupplyModel(Remoteantenna)Approvalnumber:TC21344Ex ia IIC T4 XInputParameter:Ui=28V,Ii=135mA, Pi=850mW,Ci=0.013μF, Li=0.24mHSensorCircuitParameter:Uo=5.88V, Io=130.1mA,Po=191.3mW, Co=1μF,Lo=1mHAntennaCircuit:Uo=5.88V,Io=177.4mA, Po=349.5mWAmbientTemperature:–50to70°CEnclosure:IP20

EnclosureIntheexamination,IP20enclosure,whichisthe lowest intrinsically safe explosion-proof requirement,hasbeenverified,butboththeintegrated antenna model and remote antenna model can be used in an environment that requires IP66/IP67.

■ PHYSICALSPECIFICATIONSEnclosureHousingLowcoppercastaluminumalloy

Coating• Standardcoating polyurethane, mint-green paint. (Munsell 5.6 BG

3.3/2.9 or its equivalent)• Highanti-corrosioncoating(OptionCode/X2) Basecoating:epoxyresincoating Finishcoating:polyurethanecoating The color is same as standard type.

DegreesofProtectionIP66/IP67,NEMAType4XNote:ForIntrinsicallysafeApproval,refertoREGULATORYCOMPLIANCESTATEMENTS

ConnectionsReferto“MODELANDSUFFIXCODES.”

ConnectionTerminal4 mm Screw terminal

NamePlateandTag316 SST

MountingBlacket316 SSTSelect pipe mounting or wall mounting

Weight3.2 kg (7.05 lb)Without mounting bracket.

■ ACCESSORIESRemoteAntennaCable(optionalaccessories)(Onlybyorderofoption)

SpecificationofCable:8D-SFA(HDPE)OutsideDiameterofCable:11.1mmMinimumBendRadius:67mm(whenfixing) 167 mm (when wiring)CableEndTreatment:Ntypeconnector,oneendismale and the other is female.Operationaltemperaturerange:-40to+85°C (-40to185°F)

*“Whenfixing”showsthebendingradiusforfixing(thestate is maintained for a long time).

“Whenwiring”showsthebendingradiuswhilechecking the wiring position. This bending radius issetlargerthanthatforfixinginordertopreventdamage to the cable because the cable is likely to berepeatedlybentwhencheckingthefinalwiringposition.

../submenu.htm

../../index.htm



Table1.Sensortype,measurementrange,andaccuracySensorType Standard MeasurementRange Accuracy

T/C

B

IEC 60584

100to1820°C(212.0to3308.0°F) Accuracy not guaranteed for less than 400°C(752.0°F)±2.54°C(±4.57°F)intherangefrom400°C(752.0°F)ormoretolessthan800°C(1472.0°F)±1.54°C(±2.78°F)for800°C(1472.0°F)ormore

E -200to1000°C(-328.0to1832.0°F) ±0.80°C(±1.44°F)forlessthan0°C(32.0°F)±0.40°C(±0.72°F)for0°C(32.0°F)or more

J -180to760°C(-292.0to1400.0°F) ±0.80°C(±1.44°F)forlessthan0°C(32.0°F)±0.70°C(±1.26°F)for0°C(32.0°F)or more

K -180to1372°C(-292.0to2501.6°F) ±1.10°C(±1.98°F)forlessthan0°C(32.0°F)±1.0°C(±1.80°F)for0°C(32.0°F)or more

N -200to1300°C(-328.0to2372.0°F) ±2.0°C(±3.60°F)forlessthan0°C(32.0°F)±1.0°C(±1.80°F)for0°C(32.0°F)or more

R

0to1768°C(32.0to3214.4°F) ±2.00°C(±3.60°F)forlessthan200°C(392.0°F)±1.50°C(±2.70°F)for200°C(392.0°F)ormore

S

0to1768°C(32.0to3214.4°F) ±2.00°C(±3.60°F)forlessthan200°C(392.0°F)±1.40°C(±2.52°F)for200°C(392.0°F)ormore

T -200to400°C(-328.0to752.0°F) ±0.70°C(±1.26°F)

RTD

Pt100

IEC 60751

-200to850°C(-328.0to1562.0°F) ±0.30°C(±0.54°F)forlessthan400°C(752.0°F)±0.40°C(±0.72°F)intherangefrom400°C(752.0°F)ormoretolessthan500°C(932.0°F)±0.50°C(±0.90°F)for500°C(932.0°F)ormore

Pt200


Pt500


mV - -10to100[mV] ±0.035[mV]V - -0.01to1[V] ±0.001[V]

Ohm - 0to2000[Ω] ±1.0[Ω]

Note1: ForT/Cinput,addColdJunctionCompensationAccuracy(±0.5°C)tothetotalaccuracy.Note2: ForRTDinputofthe2-wireconnection,addacorrectedvalue(±0.1°C)tothetotalaccuracy.Note3: ForDCmiliamperes(4to20mA),connectexternalshuntresistors.Note4: Explosionproofingnotapplicableto[DCvolts,DCmiliamperes].

../submenu.htm

../../index.htm

6



GS 04R01B01-01EN Feb. 28, 2017-00

Table2.Effectsofambienttemperature

SensorType TemperatureEffectsper1.0°CChangeinAmbientTemperature MeasurementRange

T/C

B

0.2°C-(0.066%of(t-100)) t<300°C

0.07°C-(0.0057%of(t-300)) 300°C≤t<1000°C

0.037°C t≥1000°C

E0.035°C-(0.00492%oft) t<0°C

0.035°C-(0.00146%oft) t≥0°C

J0.0039°C-(0.00529%oft) t<0°C

0.0039°C+(0.00149%oft) t≥0°C

K0.00521°C-(0.00707%oft) t<0°C

0.00521°C+(0.00182%oft) t≥0°C

N0.0077°C-(0.00918%oft) t<0°C

0.0077°C+(0.00136%oft) t≥0°C

R, S

0.04°C0+(0.0102%oft) t<100°C

0.0316°C-(0.001%oft) 100°C≤t<600°C

0.0175°C+(0.00173%oft) t≥600°C

T0.00513°C-(0.00631%oft) t<0°C

0.00513°C+(0.0008%oft) t≥0°C

RTD

Pt100 0.0048°C+(0.0016%ofabsolutevaluet) Entire Sensor Input Range

Pt2000.0038°C+(0.0015%ofabsolutevaluet) t<650°C

0.0028°C+(0.0016%oft) t≥650°C

Pt5000.003°C+(0.0014%ofabsolutevaluet) t<650°C

0.002°C+(0.0016%oft) t≥650°C

mV 0.0002mV+(0.0015%ofreading) Entire Sensor Input Range

V 0.005mV+(0.0015%ofreading) Entire Sensor Input Range

Ohm 0.001Ω+(0.0009%ofreading) Entire Sensor Input Range

Note1: The“t”onTable2meansthevalueofthereadingin°C.Note2: The“absolutevaluet”onTable2meanstheabsolutevalueofthereadingin°C. [Exampleofabsolutevaluet] When the temperature value is 250 Kelvin, abs reading is 23.15, absolute (250 - 273.15).

../submenu.htm

../../index.htm



MODELANDSUFFIXCODESModel SuffixCode Descriptions

YTMX580 Multi-Input Temperature TransmitterOutputSignal -L Wireless communication (ISA100 Wireless)Housing 7 Always 7

Electrical Connection0 G 1/2 female, nine electrical connections2 1/2NPTfemale,nineelectricalconnections4 M20 female, nine electrical connections

Integral Indicator N None

Mounting BracketL 316 SST 2-inch pipe mountingW 316 SST wall mounting*1

N NonePowerSupply -A Battery (case only, battery not included), with a blind plug

-B 24VDC,withoutablindplugAntenna*5 A Integral antenna

B Remote antenna*4

Temperature Unit -A Cel, K *2

-B Cel, K, degF, degR *3

--- A Always AOptionCodes Optionalspecifications(SeeOptionCode)

*1: Forwallmounting,pleaseprepareboltsandnuts.*2: ThisisaJapan-onlyspecification(onlyavailabletoendusersinsideJapan).*3: InJapan,degF(°F)anddegR(°R)arenon-statutorymeasurementunits.Suffixcode-Bcanonlybespecifiedbyendusers

outside of Japan.*4: Ordertheremoteantennacablesseparatelyfromaccessaryoption.*5: Useofantennaislimitedbylocalregulationofradioandtelecommunicationlaw.ConsultYokogawafordetails.Note:"Cel"means"°C","degF"means"°F"and"degR"means"°R".

OPTIONALSPECIFICATIONItem Description OptionCode

Coating High anti-corrosion coating /X2Factoryconfiguredsettings Factoryconfiguredsettingswithmultipleinputtypes/ranges /FC1*1

*1: Iftheoptioncoderelatedtoexplosionprotectionisspecified,EitherDCV(mV)orDCV(V)assensortypeisshouldNOTbeapplied.

OPTIONALSPECIFICATION(ForExplosionProtectedtype)Item Description OptionCode

Canadian Standards Association (CSA) CSA Intrinsically safe and non-incendive approval /CS17*1

Factory Mutual (FM) FM intrinsically safe and nonincendive approval /FS17*1

TIIS TIIS intrinsically safe approval /JS37*1

ATEX ATEX intrinsically safe approval /KS27*1

IECEx Scheme IECEx intrinsically safe approval /SS27*1

*1: /CS17,/FS17,/JS37,/KS27,/SS27cannotbespecifiedtogether.

StandaradAccessoriesProduct Qty

User's manual (Booklet) 1Mounting bracket*1 (2-inch pipe mounting or wall mounting) 1 setBattery case ( installed in the main body. )*3 1Remote antenna*2 1

*1: Notincludedifspecifyingnomountingbrackets(MountingbracketsuffixcodeisN).*2: Withtheremoteantennaoption(AntennatypesuffixcodeisB).*3: Whenbatteryisspecifiedforthepowersupply(Powersupplysuffixcodeis-A)

../submenu.htm

../../index.htm

8



GS 04R01B01-01EN Feb. 28, 2017-00

OptionalAccessoriesProduct Modelcode(partnumber) Specification

Remote antenna cable*1 F9193UA Antennacable:1m,Operationaltemperaturerange:-40to+85°C,Withremoteantennamountingbracket.

F9193UB Antennacable:3m,Operationaltemperaturerange:-40to+85°C,Withremoteantennamountingbracket.

F9193UC Antennacable:4m(1m+3m)witharrestor,Operationaltemperaturerange:-40to+85°C,Withremoteantennamountingbracket.

F9193UD Antennacable:6m(3m+3m)witharrestor,Operationaltemperaturerange:-40to+85°C,Withremoteantennamountingbracket.

F9193UE Antennacable:13m(3m+10m)witharrestor,Operationaltemperaturerange:-40to+85°C,Withremoteantennamountingbracket.

Antenna*1 F9193DH +2dBiRemoteAntenna(White)

*1: Useofremoteantennacableislimitedbylocalregulationofradioandtelecommunicationlaw.ConsultYokogawafordetails.

Product Modelcode(partnumber) SpecificationBattery pack assembly F9915NQ*1 Batterycase,Lithium-thionylchloridebatteries2piecesBattery case F9915NK*2 Battery case onlyBatteries F9915NR Lithium-thionylchloridebatteries,2pieces

Front door part

B8808DE Front door Gasket, 1 pieceB8808DM FrontdoorBoltCap(Long),1pieceB8808DN Front door Bolt Cap (Short) , 1 pieceB8808EM Front door Bolt SUS316, 1 piece

BracketB8808DW 2BPipeMountingBracketSUS316B8808DV Wall Mounting Bracket SUS316

Shunt resistor X010-050-1 50Ω±0.1%,for4mmscrewterminals,Operationaltemperaturerange:-25to+80°C

*1: IfyouneedF9915MA,pleasepurchaseF9915NQ.F9915NQisasetofF9915MAandinstructionmanual.*2: IfyouneedF9915NS,pleasepurchaseF9915NK.F9915NKisasetofF9915NSandinstructionmanual.

Model SurffixCode DescriptionYTMXBP Blind plug for electrical connection

Type and Quantity

-A1 G 1/2, 1 piece-A4 G 1/2, 4 pieces-A7 G 1/2, 7 pieces-C1 1/2NPT,1piece-C4 1/2NPT,4pieces-C7 1/2NPT,7pieces-D1 M20, 1 piece-D4 M20, 4 pieces-D7 M20, 7 pieces

../submenu.htm

../../index.htm



Note:Ifnotspecified,thetoleranceis3%.However,fordimentionslessthan10mm,thetoleranceis0.3mm.

DIMENSIONS● 2-inchpipemounting(verticalorhorizontalpipe)

E02.ai

246

(9.6

9)89

.5 (3

.52)

□ Height of directly attach the remote antenna to the body

173

(6.8

1)

89.5

(3.5

2)16

4 (6

.46)

133.8 (5.27)

118 (4.65)118 (4.65)

120 (4.72)

125 (4.92)

147.3 (5.80)

67.3 45.2

110

(4.3

3)

Mounting bracket

(2.65)

2-inch pipe(O.D. 60 mm)

Unit: mm (approx. inch)

(1.78)

48 48 48 48

3055

.8

48 48 48

(1.1

8)(2

.20)

Electrical connection

(1.89)

(1.89)

../submenu.htm

../../index.htm

10



GS 04R01B01-01EN Feb. 28, 2017-00

● Wallmounting

E03.ai

256 (10)276 (10.87)

184

(7.2

4)

143 (5.63)

335.

5 (1

3.21

)33

8 (1

3.31

)

256

(10.

08)

164

(6.4

6)

10

10

Mounting bracket

Unit: mm (approx. inch)

(0.39)

□ Height of directly attach the remote antenna to the body

48 48 48 48

48 48 48

3051

.3

(1.89)

(1.89)

Electrical connection

(2.0

2)(1

.18)

4-Ø6.2

□ Wall mounting dimensions4-Φ6.2±0.2 holeor M5 tapping

164±0

.5(6

.46±0

.02 )

256±0.5(10.08±0.02)


../submenu.htm

../../index.htm



● RemoteantenabracketUnit: mm (approx. inch)

2-inch pipe

71.7 (2.82)17 (0.67) 37.3 (1.47)

J04.ai

17.5 (0.69)

87.7

(3.4

5)

98 (3.86)

135

(5.3

1)29

2 (1

1.50

)

minimum R67

● Remoteantenna

Main unit Main unit

Antenna

Antenna

CableLength : 1 m or 3 m (selectable)

Cable 2Length : 3 m or 10 m (selectable)

Cable 1Length : 1 m or 3 m (selectable)

E05.ai

<With arrester><Without arrester>

Arrester

150

18

Ø20.5

□ AntennaAntenna* Non-direction antenna* Gain : +2 dBi*Part number: F9193DH

□ Antenna cableHigh-frequency coaxial cable* Sheath dia : 11.11mm


../submenu.htm

../../index.htm

12



GS 04R01B01-01EN Feb. 28, 2017-00

● ExternalPowerSupplyWiring

External Power Supply (24V DC)

E09.ai

● TerminalConfiguration

E07.ai

Ground terminal

Ground terminal● InputWiring

TC or DC millivolts

(+)(–)

two-wireRTD or ohm

three-wireRTD or ohm

four-wireRTD or ohm

(B)(A) (b)

(B)

(A)(A)

(b)(B)

(a)

4~20mAdevice

Powersupply50Ω

(+)(+)

(–)(–)

DC milliamperes（ use a shunt resistor ）

E08.ai

● InfraredConfiguration

E06.ai

Infrared port

../submenu.htm

../../index.htm

13



GS 04R01B01-01EN


Feb. 28, 2017-00Subject to change without notice.

<OrderingInformation>SpecifythefollowingwhenorderingModel,suffixcodes, and optional codes. The instrument is shipped with the settings shown in Table A.1. Sensor type.

1) Select an input sensor type from table 1. Each input is of the same type.

2)ForRTDandresistanceinput,specifythenumberofwireaswell.(Example;Pt1003-wiresystem)

3)Withthe/FC1option(Factoryconfiguredsettingswith multiple input types/ ranges), please indicate the type of sensor for each input. You can also select"NOT_USED"forinputs2through8.

Note1:Iftheoptioncoderelatedtoexplosionprotectionisspecified,EitherDCV(mV)orDCV(V)assensortypeisshouldNOTbeapplied.

Note2:Iftheperiodofmeasurementis1second,themaximum number of measuring points is 3. At a 1-second period, the sensor type for at least 5 pointsmustbesetto“NOT_USED.”

2. Calibration range and unit (if required)1)Calibrationrangecanbespecifiedwithinthe

measurement range shown in Table 1. With the /FC1 option, please indicate the upper

and lower limit values for each input. If /FC1 is notspecified,theupperandlowerlimitvaluesforall inputs will be the same.

2)Pleasespecifytheunitsoftemperatureforeachinput(°C,°K,°F,or°R).°Fand°RareavailablewhenTemperatureUnitsuffixcode-Bisspecified.(InJapan,°Fand°Rarenon-statutorymeasurementunits.Suffixcode-BcanonlybespecifiedbyendusersoutsideofJapan.)

With the /FC1 option, please indicate the unit for eachinput.If/FC1isnotspecified,theunitforallinputs will be the same.

ItisnotnecessarytospecifytheunitofmV,Vand ohm inputs, for these units automatically will bemV,VorOhm.

3. Tag Number (if required) Specify Tag number (up to 16 letters) to be

engravedonthetagplate.Also,thespecifiedlettersarewrittentothe“Tag_Name“(16letters)oftheamplifiermemory.Thecharacterscanbespecifiedusingalphanumericandthesymbols,[-]and[.].DonotwriteanythingtoTagnumberwhen nothing is engraved on the tag plate.

4. Software tag (if required) Specify this software tag when the tag number

required is different from the tag number specifiedfortheTagplate.Thetagnumberspecifiedin“Softwaretag”willbeenteredon“Tag_Name”(upto16letters)intheamplifiermemory.

5.NetworkID(ifrequired) Specify the number from 2 to 65535.When not

specified,itwillbe1.Note Lower-casealphabetcharactersandperiods

[.]cannotbeusedinYokogawa’sconfigurationsoftware.Specifythetagname(Tag_Name)usinga combination of upper-case alphabet characters, numbers,andhyphens[-].

<FactorySetting>TableA.SettingsuponshipmentTag No. “Blank”orasspecifiedinorder

Calibration range and unit See Table 1. Measurement Range orasspecifiedinorder

<RelatedInstruments>PaperlessRecorderWirelessModelGX20WRefertoGS04L51B11-01EN,GS04L53B01-01EN(I/OModules)

FieldWirelessIntegratedGatewayYFGW710:Refer to GS 01W01F01-01EN

FieldWirelessManagementStationYFGW410:RefertoGS01W02D01-01EN

FieldWirelessAccessPointYFGW510:Refer to GS 01W02E01-01EN

FieldWirelessMediaConverterYFGW610:RefertoGS01W02D02-01EN

VersatileDeviceManagementWizardFieldMate:Refer to GS 01R01A01-01E

Thermocouple:RefertoGS06B01B01-00E,GS 06B01E01-00E

MineralInsulatedThermocouple:RefertoGS06B02D01-00E

ResistanceTemperatureSensor:RefertoGS06B03B01-00E,GS06B04D01-00E

ProtectionTube,Thermowell:Refer to GS 06B02T02-00E

PaperlessRecorderModelGX10/GX20/GP10/GP20RefertoGS04L51B01-01EN(GX10/GX20),GS04L52B01-01EN(GP10/GP20),GS04L53B01-01EN(I/OModules)

PaperlessRecorderDAQSTATIONDX1000,DX2000:RefertoGS04L41B01-01E,GS04L42B01-01E

DataAcquisitionSystemGM:RefertoGS04L55B01-01EN,GS04L53B01-01EN(I/OModules)

DataAcquisitionUnitMW100:Refer to GS 04M10A01-01E

<RelatedDocuments>FieldWirelessSystemOverview:

Refer to GS 01W01A01-01EN<Trademarks>All the brand names or product names of Yokogawa Electric used in this document are either trademarks or registered trademarks of Yokogawa Electric Corporation.Company and product names used in this manual are trademarks or registered trademarks of their respective holders.The company and product names used in this manual are not accompanied by the trademark or registered trademark symbols (" ™ " and " ® ").

../submenu.htm

../../index.htm

../submenu.htm

../../index.htm

YTMX580 Multi-Input Temperature Transmitter · Cold Junction Compensation Accuracy For T/C only ±...

Documents

Transcript of YTMX580 Multi-Input Temperature Transmitter · Cold Junction Compensation Accuracy For T/C only ±...