Your Source for Soldering Iron Tips - Hroty PLATO - ELPRO ... · Weller ® 12 Ungar® 18 Hakko®...
Transcript of Your Source for Soldering Iron Tips - Hroty PLATO - ELPRO ... · Weller ® 12 Ungar® 18 Hakko®...
Weller® 12Ungar® 18Hakko® 19O.K. Industries® 19, 29Hexacon® 25Bonkote® 26Edsyn Loner® 28Ersa® 30Pace® 31, 34Antex® 33Oryx® 331/8” Tips 343/16” Tips 351/4” Tips 355/16” Tips 373/8” Tips 375/8” Tips 38
• Only Brand ofReplacement TipsYou Need!
• Top Quality
• Long Life
• Fast Heat Recovery
• Competitively Priced
• Custom Tips for Robotic & Special Applications
Your Source for Soldering Iron Tips
• Only Brand ofReplacement TipsYou Need!
• Top Quality
• Long Life
• Fast Heat Recovery
• Competitively Priced
• Custom Tips for Robotic & Special Applications
12 WWW.PLATOPRODUCTS.COM
Soldering Station • WSP 150
Soldering Stations • WS 80 • WSD 80 • WSD 130 • WSD 150Soldering Pencils • WSP 80 • MPR 80
Weller®
—
—
—
LT1
LT1L
LT1LX
LT1S
LT1SLX
LT4
LTA
LTAS
MS-0105
MS-0201
MS-4140
MS-4120
MS-4110
MS-4101
MS-4100
MS-4125
MS-5160
MS-3200
MS-4150
PLATO® TIP
Tip samples are available. Custom tip designs on request.
LTB
LTC
LTCS
LTD
LTGW
LTH
LTHX
LTK
LTL
LTM
LTS
MS-3300
MS-3400
MS-4160
MS-3600
MS-0100
MS-3110
MS-3101
MS-3150
MS-3250
MS-3450
MS-4130
Weller® PLATO® TIP
All dimensions shown are before tinning and are subject to manufacturing tolerances.
All points are .075" (1.9) thick unless otherwise noted.
( ) = mm
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are
subject to manufacturing tolerances.
Weller®
LHT-D
LHT-E
LHT-F
MH-3200
MH-3400
MH-3600
PLATO® TIP
WELLER®
WELLER®
SPECS / SAMPLES • 800-858-4043 13
Soldering Stations • WTCPL • WTCPN • WTCPR • WTCPSHandpieces • WTCPT • TC201T
ATTENTION “NO CLEAN” FLUX USERS: The Plato 7.5 (750°F/399°C)temperature sensor is available on all C-series tips. The use of no-clean fluxes has introduced the risk of premature detinning of soldertips when exceeding temperatures of 750°F/399°C. To maximize yourtip life, use Plato 7.5 Temperature Sensor when using no-clean fluxesand substantially reduce your risk of premature detinned tips.
Indicated temperature ranges are nominal and will vary according tostyle of tip, condition of iron, manner of use, and other variables.All dimensions are shown before tinning and are subject tomanufacturing tolerances.
All points are 1/32" (0.8) thick unless otherwise noted. Tip samples available. Custom tip designs on request. ( ) = mm
Weller® PLATO® TIP
PTA
PTB
PTC
PTD
PTE
PTF
PTH
PTJ
PTK
PTL
PTM
PTO
Tip drawings are actual size.
Tip drawings are actual size.
Weller® PLATO® TIP
PTP
PTQ
PTR
---
PTS
PTT
PTX
PTZ
PTAA
PTBB
PTCC
PTDD
---
PTMX
---
WELLER®
Be sure to add temperature indicating number to Plato® part numberwhen ordering Plato® C-Tips.
Use chart below, completing the part number by adding one of thefollowing numbers as the final digit (example - C-3039-6):
6 (600°F/315°C) 7.5 (750°F/399°C) 9 (900°F/480°C)7 (700°F/370°C) 8 (800°F/425°C)
14 WWW.PLATOPRODUCTS.COM
Soldering Stations • EC-1002 • EC-2002 • MC-5001 • WCC-100 • WES-50 • WTL-1000 • DTL-1000 • DEC-1000 • Soldering Handpieces • EC1201A • EC-1201AFE • EX1201AFE • WCC-101
Weller® PLATO® TIP
ETR
---
ETS
ETT
ETBS
ETCS
ETDS
---
ETAA
ETBB
ETCC
ETDD
---
ET-MX
---
Tip drawings are actual size.Weller® PLATO® TIP
ETA
ETB
ETC
ETD
---
ETH
ETJ
ETK
ETL
ETM
ETO
ETP
ET-JL
ET-SMD 2.5mm
ET-SMD 3.8mm
Tip drawings are actual size.
The interior surfaces of these tips are protected to prevent adhesionto the sensor. All dimensions are shown before tinning and aresubject to manufacturing tolerances.
All points are 1/32" (0.8) thick unless otherwise noted. Tip samples available. Custom tip designs on request. ( ) = mm
WELLER®
SPECS / SAMPLES • 800-858-4043 15
Soldering Irons • WLC-100 • WP-25 • WP-30 • WP-35
Weller® PLATO® PLATO® TIP
EPH101 RX-4762
EPH102 RX-402
EPH103 RX-513
EPH104 RX-404
EPH105 RX-515
EPH106 RX-306
EPH107 RX-307
EPH109 RX-409
EPH110 RX-401
EPH111 RX-4764
EPH112 RX-4763
--- RX-5567
--- RX-5568
Tip drawings are actual size.
Weller® PLATO® PLATO® TIP
ST-1 44-3870
ST-2 44-3871
ST-3 44-3872
ST-4 44-1312
ST-6 44-3873
ST-7 44-8182
ST-8 41-1313
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Tip drawings are actual size.
WELLER®
Soldering Stations • MC-5001 • EC-1002 • EC-2002 • WTL1000-2 • DEC-1001 • DTL-1000Soldering Handpiece • EC1302A WELLER®
The interior surfaces of thesetips are protected to prevent
adhesion to the sensor.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
16 WWW.PLATOPRODUCTS.COM
Soldering Iron • W60P
Weller® PLATO® PLATO® TIP
CT6C 6C-3219
CT6D 6C-3220
CT6E 6C-3221
CT6F 6C-1083
Tip drawings are actual size.
Specify temperature indicating number.Complete the Plato® part number byadding one of the following numbers asthe final digit (example - 6C-3219-6):
6 (600°F/315°C) 8 (800°F/425°C)
7 (700°F/370°C) 9 (900°F/480°C)
Indicated temperature ranges are nominaland will vary according to the style of tip,condition of iron, manner of use, andother variables.
All points are 1/16" (1.6) thick unlessotherwise noted. ( ) = mm
All dimensions are shown before tinningand are subject to manufacturingtolerances.
Specify temperature indicating number. Complete the Plato® part number by adding oneof the following numbers as the final digit(example - 4C-3241-6):
6 (600°F/315°C) 8 (800°F/425°C)
7 (700°F/370°C) 9 (900°F/480°C)
All points are 1/32"(0.8) thick unless otherwisenoted. ( ) = mm
Tip samples are available. Custom tip designs onrequest. All dimensions are shown beforetinning and are subject to manufacturingtolerances.
Indicated temperature ranges are nominal andwill vary according to the style of tip, conditionof iron, manner of use, and other variables.
Weller® PLATO® PLATO® TIP
CT5A 4C-3241
CT5B 4C-3242
CT5C 4C-3243
CT5D 4C-3244
CT5E 4C-1080
Tip drawings are actual size.
WELLER®
Soldering Iron • W100PGWELLER®
SPECS / SAMPLES • 800-858-4043 17
Micro-Soldering Pencil • MLR 20 • MPR 30 WELLER®
Weller® PLATO® PLATO® TIP
MPT-1 DX-4771
MPT-1S DX-4814
MPT-4 DX-5590
— DX-5688
— DX-2727
MPT-6 DX-1500
MPT-A DX-2684
MPT-B DX-2726
MPT-H DX-2683
MPT-HX DX-2987
— DX-4977
— DX-5550
MT-GW DX-5551
— DX-0600
MT-JL DX-0601
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
18 WWW.PLATOPRODUCTS.COM
Soldering Stations • 9900AS • 2110AS • UTC-Series
Weller/Ungar® PLATO® PLATO® TIP
9056 UC-8803
9057 UC-6105
9058 UC-6106
9059 UC-6107
9060 UC-6108
9061 UC-6109 Ungar® P/N 9919 or 2106TTip Retainer Assembly Required
WELLER®UNGAR®
Soldering Stations • 9900AS • 2110AS • UTC-Series
Tip drawings are actual size.
Weller/Ungar® PLATO® PLATO® TIP
9010 UC-8801
9011 UC-7001
9012 UC-6100
9013 UC-7002
9014 UC-7003
9015 UC-6101
9016 UC-6110
9017 UC-6102
9018 UC-6103
9019 UC-7004
9050 UC-8802
9051 UC-6104
9052 UC-7005
Ungar® P/N 9037 or 2108S Tip Retainer Assembly Required
Tip drawings are actual size.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
WELLER®UNGAR®
SPECS / SAMPLES • 800-858-4043 19
Hakko® Soldering Stations • 702 • 703 • 703B • 926 • 927 • 928 • 933 • 936 • 937Handpieces • M926 • 900M • 907 ESD • O.K. Industries SA1000 Station with SAI-640 Handpiece HAKKO®
Hakko® PLATO® PLATO® TIP
900M-T-1C HS-5701
900M-T-2C HS-5702
900M-T-3C HS-5703
900M-T-4C HS-5875
900M-T-0.2RB HS-4791
900M-T-0.5C HS-5715
900M-T-0.8C HS-5716
900M-T-0.8D HS-2863
900M-T-1.2D HS-2796
900M-T-S1
900M-T-1.6D HS-2751
900M-T-1.8H HS-0926
900M-T-2.4D HS-2752
900M-T-3.2D HS-2753
900M-T-1.2LD HS-6030
900M-T-1.5CF HS-5861
900M-T-1CF HS-5862
900M-T-2CF HS-5863
900M-T-3CF HS-5864
900M-T-4CF HS-5866
900M-T-2LD HS-6092
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
O.K.INDUSTRIES®
Typical Tip Drawing
20 WWW.PLATOPRODUCTS.COM
Hakko® Soldering Stations • 702 • 703 • 703B • 926 • 927 • 928 • 933 • 936 • 937Handpieces • M926 • 900M • 907 ESD • O.K. Industries SA1000 Station with SAI-640 Handpiece
Tip drawings are actual size.Hakko® PLATO® PLATO® TIP
900M-T-3.2LD HS-6093
900M-T-B HS-4785
— HS-8179
900M-T-H HS-0925
900M-T-I HS-4787
900M-T-K HS-0927
900M-T-LB HS-4786
900M-T-R HS-0923
900M-T-RT HS-0924
900M-T-SB HS-4792
900M-T-SMD HS-4988
900M-T-S3 HS-1665
900M-T-S4 HS-8175
900M-T-S5 HS-8157
900M-T-S6 HS-5827
900M-T-S7 HS-5826
— HS-0530
— HS-0531
HAKKO®
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
O.K.INDUSTRIES®
Typical Tip Drawing
SPECS / SAMPLES • 800-858-4043 21
Soldering Stations • 702 • 703 • 703B • 926 • 927 • 928 • 934 • 936 • 937 Handpieces • L926 • 900L • 900L ESD • 908L • 908ESD HAKKO®
Hakko® PLATO® PLATO® TIP
900L-T-2B HS-4789
900L-T-2C HS-5705
900L-T-3C HS-5706
900L-T-3CF HS-5867
900L-T-4C HS-5707
900L-T-4CF HS-5865
900L-T-5C HS-5876
900L-T-1.6D HS-6094
900L-T-2.4D HS-6027
900L-T-3.2D HS-2755
900L-T-B HS-4788
900L-T-I HS-4790
900L-T-K HS-0922
900L-T-LB HS-8177
900L-T-S1 HS-1666
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
22 WWW.PLATOPRODUCTS.COM
Soldering Irons • 918 • Mach-I
Hakko® PLATO® PLATO® TIP
918-T-3C HS-5807
918-T-4C HS-5877
918-T-5C HS-5878
918-T-1.6D HS-2938
918-T-2.4D HS-2939
918-T-3.2D HS-6029
918-T-B HS-4838
918-T-BC HS-5806
Tip drawings are actual size.
Hakko® PLATO® PLATO® TIP
582-T-4 400-8148
585-T-6 600-8149
587-T-8 800-8150
Tip drawings are actual size.
Hakko® PLATO® PLATO® TIP
BB-3 300-8179
BB-4 400-8182
BB-6 600-8181
Tip drawings are actual size.
HAKKO®
Red Soldering Iron • 500 • 501 • 502 • 503HAKKO®
MG Soldering Gun Models • 582 • 583 • 585• 587• 589• 592HAKKO®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
SPECS / SAMPLES • 800-858-4043 23
Soldering Irons • 920 • 921 • 922 • MACH-I
Hakko® PLATO® PLATO® TIP
920-T-2C HS-5781
920-T-3C HS-5857
920-T-4C HS-5859
920-T-1.0D HS-6095
920-T-1.6D HS-2936
920-T-2.4D HS-2937
920-T-D
920-T-3.2D HS-2818
920-T-B HS-4840
920-T-BC HS-5805
920-T-I HS-4933
920-T-R HS-0876
920-T-RT HS-0877
Tip drawings are actual size.
HAKKO®
Soldering Iron • 980 • 981 HAKKO®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Hakko® PLATO® PLATO® TIP
980-T-B HS-5710
980-T-BC HS-5711
980-T-D HS-5712
Tip drawings are actual size.
All points are .041" (1.04) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
24 WWW.PLATOPRODUCTS.COM
Soldering Irons • Dash N452 • Dash N453
Hakko® PLATO® PLATO® TIP
N454-T-B HS-4903
N454-T-D HS-1648
N454-T-I HS-8127
N454-T-2C HS-5885
N454-T-3C HS-5886
N454-T-4C HS-5887
N454-T-5C HS-5888
Tip drawings are actual size.
Tip drawings are actual size.Hakko® PLATO® PLATO® TIP
N452-T-B HS-4860
N452-T-C HS-5879
N452-T-D HS-1647
N452-T-I HS-4904
N452-T-SB HS-8126
N452-T-SC HS-5880
N452-T-SD HS-1646
N452-T-1C HS-5881
N452-T-2C HS-5882
N452-T-3C HS-5883
N452-T-4C HS-5884
Soldering Iron • Dash N454HAKKO®
HAKKO®
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
Typical Tip Drawing
SPECS / SAMPLES • 800-858-4043 25
All points are 1/32" (0.8) thick unless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown before tinning and are subject tomanufacturing tolerances.
Soldering Irons • Therm-O-Trac • 1001 • 1002 • 1002A and Select-O-Trac • 1003A/B • 1006A/B
Hexacon® PLATO® TIP
J101X
J102X
J201X
J202X
J203X
J204X
J206X
J301X
J302X
J901X
J910X
J911X
Tip drawings are actual size. Hexacon® PLATO® TIP
J912X
J914X
J915X
J916X
J917X
J918X
J919X
J932X
J935X
J940X
J954X
Tip drawings are actual size.
HEXACON®
Typical Tip Drawing
26 WWW.PLATOPRODUCTS.COM
Soldering Irons • MS-10, MS-11, MS-14 • MV-15/16 • MS-17 • MF-20/21
These tips have an internal diameter of 5/32" (4.0). They are slotted as shown and furnished with a retainer ring.
Tip drawings are actual size.Hexacon® PLATO® PLATO® TIP
HT880X PS-383
HT881X PS-594
HT882X PS-411
HT883X PS-512
HT884X PS-555
HT885X PS-372
HT886X PS-157
--- PS-478
--- PS-508
--- PS-444*
--- PS-526*
Bonkote® PLATO® PLATO® TIP
5-0.5C BKT-5897
5-1C BKT-5899
5-2B BKT-8144
5-2BC BKT-5900
5-2C BKT-5898
5-2D BKT-6079
Tip drawings are actual size.
SG5 Tip Series Used In PC-118SL
HEXACON®
BONKOTE®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
* This indicates that the tip isnickel plated (economy grade);all other tips are iron clad(premium quality).
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
Typical Tip Drawing
SPECS / SAMPLES • 800-858-4043 27
SGL7 Tip Series used in • CRD-730,-740 • CRL-730,-740 • CR-1073 • SS-1005A • TC-300A,-400A,-500A
Bonkote® PLATO® PLATO® TIP
7-1C BKT-5736
7-2B BKT-4835
7-3C BKT-5738
7-5A BKT-2046
7-5B BKT-4836
7-KF BKT-0954
Tip drawings are actual size.
Bonkote® PLATO® PLATO® TIP
10-4C BKT-5777
10-6B BKT-4832
10-6C BKT-5778
10-8B BKT-4857
10-8D BKT-2792
10-KF BKT-0940
--- BKT-0940WB
Tip drawings are actual size.
BONKOTE®
SG10 Tip Series used in • SR-1062, -1062F, -1072 • CRD-1030, -1040 • CRL-1030,-1040 • SRL-1062, -1062F, -1072 • SS-1005B • TC-300B, -400B, -500B BONKOTE®
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
Typical Tip Drawing
Typical Tip Drawing
28 WWW.PLATOPRODUCTS.COM
Soldering Irons • CL1080 • CL1180 • 900 • 902 • 920 • 925 • 930 • 935 • 951 • 952 • 952DX • HX • SX • 981 • LSTII
EdsynLoner® PLATO® PLATO® TIP
LT-374 E-4709
LT-375 E-2621
LT-376 E-2622
LT-381 E-8134
LT-383 E-4781
LT-392 E-4711
LT-393 E-5649
LT-394 E-2627
LT-395 E-2625
LT-425 E-2626
LT-429 E-4710
LT-430 E-5892
LT-431 E-2624
LT-444 E-2856
LT-444-1 E-6060
LT-445 E-5891
LT-446 E-4708
Tip drawings are actual size.
EDSYNLONER®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
SPECS / SAMPLES • 800-858-4043 29
Soldering Stations • SA-3 • SA-10 • SA-10-E • BTR-35/55 stations; Nos. SAI-3 • SAI-548A • SAI-60 • SAI-560 • SA-1200 • SA-1201 systems, Xytronic®
OK Ind.® Xytronic® Elvo® PLATO® PLATO® TIP
SAT-3X10 823 E231 TX-440
SAT-3X20 --- E301 TX-406
SAT-3X30 822 E221 TX-300
SAT-3X40 826 E261 TX-314
SAT-3X50 824 E241 TX-322
SAT-3X60 --- --- TX-429
SAT-3X70 --- E311 TX-338
SAT-3X80 --- E281 TX-343
SAT-3X90 --- E291 TX-351
SAT-3X100 825 E251 TX-367
SAT-3X110 --- --- TX-7051
SAT-3X120 --- --- TX-7052
SAT-3X130 --- --- TX-7053
SAT-3X140 --- --- TX-6085
SAT-3X150 --- --- TX-6086
Tip drawings are actual size.
Tip drawings are actual size.OK Ind.® PLATO® PLATO® TIP
SAT-310X10 CI-4713
SAT-310X20 CI-2629
SAT-310X30 CI-2642
SAT-310X40 CI-4717
SAT-310X50 CI-5651
SAT-310X60 CI-5652
--- CI-4712
O.K.INDUSTRIES®
30 Watt Soldering Irons, Start®, Elvo®, and Xytronic® O.K.INDUSTRIES®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
30 WWW.PLATOPRODUCTS.COM
Soldering Stations • Analog 60 • Analog 60A • Analog 80 • Analog 80A • Digital 80A • Multi Pro • Micro-Con 60 IA • Twin 80 A • ELS 8000/M/D • MS 6000 • MS 8000/D
Ersa® PLATO® PLATO® TIP
602BD ER-4743
602CD ER-2675
602ED ER-2676
602KD ER-2643
602SD ER-4742
602UD ER-8550
602VD ER-2678
832BD ER-4002
832CD ER-3998
832DD ER-5001
832ED ER-3101
832FD ER-5002
832ID ER-4003
832KD ER-3997
832OD ER-0975
832UD ER-4005
832SD ER-4004
— ER-4006
832YD ER-3999
832PW ER-5003
Typical Tip Drawing
ERSA®
Typical Tip Drawing
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
SPECS / SAMPLES • 800-858-4043 31
Soldering Irons • SP-1A • SP-2A • PS-80 • ST-45 • IR-70 SODR-PEN®
Pace® PLATO® PLATO® TIP
1121-0335 33-6055
1121-0336 33-8142
1121-0337 33-6058
1121-0349 33-1657
1121-0357 33-8141
1121-0358 33-1658
1121-0359 33-1144
1121-0360 33-6057
1121-0361 33-1146
1121-0363 33-8143
1121-0406 33-5894
1121-0414 33-6056
1121-0490 33-5895(similar to)
1121-0499 33-1147
1121-0500 33-1148
1121-0563 33-5896
1121-0564 33-5897
1121-0610 33-5898
Tip drawings are actual size.
PACE®
All points are .025" (0.6) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
32 WWW.PLATOPRODUCTS.COM
Soldering Irons • SP-1A • SP-2A • PS-80 • ST-45 • IR-70
Pace® PLATO® PLATO® TIP
1121-0302 SMP-2001
1121-0303 SMP-2002
1121-0304 SMP-2003
1121-0305 SMP-2005
1121-0402 SMP-2004
Pace® PLATO® PLATO® TIP
1121-0527 33-7102
1121-0528 33-7101
1121-0529 33-7104
1121-0530 33-7105
1121-0531 33-7106
1121-0532 33-7107
1121-0533 33-7103
Pace® PLATO® PLATO® TIP
1121-0510 33-3985
1121-0516 33-3981
1121-0518 33-3986
1121-0524 33-3983
1121-0525 33-3984
1121-0526 33-3982
PACE®
Soldering Irons • SP-1A • SP-2A • PS-80 • ST-45 • IR-70 PACE®
Tip drawings are actual size.
Tip drawings are actual size.
3/16" (4.8mm) Plato® Surface Mount Tips for Soldering Irons • SP-1A • SP-2A • PS-80 • ST-45 • IR-70 SODR-PEN®PACE®
All points are .025" (0.6) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
All points are .025" (0.6) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
SPECS / SAMPLES • 800-858-4043 33
Soldering Irons • C • G • M • CSTC
TYPICAL TIP DRAWING
These tips have an internal diameter of9/64" (3.6). They are slotted as shownand are furnished with a retainer ring.
Tip drawings are actual size.
Antex® PLATO® PLATO® TIP
2-IC A-108
2-IS A-521
46-IC A-144
46-IS A-542
8-I A-417
--- A-469
--- A-551
6-NS A-5217*
--- A-4212*
46-NS A-5890*
Similar toOryx® PLATO® PLATO® TIP
P O-5214*
X O-4209*
X-PL O-408
--- O-4210*
--- O-4300*
--- O-569
ANTEX®
Oryx® Soldering Irons ORYX®
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
* This indicates that the tip isnickel plated (economy
grade); all other tips are ironclad (premium quality).
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
* This indicates that the tip isnickel plated (economy
grade); all other tips are ironclad (premium quality).
1/8" (3.2mm) Plato® Tips to fit Soldering Irons For• Hexacon® • American Beauty® • Esico® • Pace® • A.P.E.®
Tip drawings are actual size.American
Hexacon® Beauty® Esico® PLATO® PLATO® TIP
HT104 524 --- 20-851HT511
HT222 510 240-102 22-449
240-111
HT249 501 210-132 22-127210-143
HT331 --- --- 22-687
HT361 503 211-105 21-175211-127
HT376 502 210-107 22-142210-114
HT477 271 --- 22-315
HT560 507 220-103 22-320HT667 220-116
HT693 512 251-120 21-572251-131
--- 509 --- 22-428
All points are 1/32" (0.8)thick unless otherwise
noted.
( ) = mm
Tip samples are available.
Custom tip designs onrequest.
All dimensions are shownbefore tinning and are
subject to manufacturingtolerances.
1/8"TIPS
1121-0130 22-1627
1121-0131 22-2931
1121-0132 22-4927
1121-0238 22-7071
1121-0339 22-8001
1121-0340 22-8003
1121-0501 22-1071
1121-0502 22-6072
1121-0503 22-8002
1121-0504 22-5073
Plato® Adapter 33-0001 (Pace® Adaptip® equivalent) to be used with all 1/8" Diameter Solder and Desolder Tips
1360-0083 33-0001
Tip drawings are actual size.
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
PACE 1/8" (3.2mm) Plato® Tips used with Plato Adapter 33-0001 to fit Pace® IR-25, PS-80, IR-70Soldering Irons and SP-1A or SP-2A SODR-PEN®
34 WWW.PLATOPRODUCTS.COM
Pace® PLATO® PLATO® TIP Tip drawings are actual size.
SPECS / SAMPLES • 800-858-4043 35
1/4" (6.4mm) Plato® Tips to fit Soldering Irons • Hexacon® • American Beauty® • Esico®
Tip drawings are actual size.American
Hexacon® Beauty® Esico® PLATO® PLATO® TIP
HT313 715 --- 44-352
HT324 703 412-246 42-138
412-159
HT343 724 440-129 44-443
440-177
HT358 714 422-347 42-347
422-144
HT397 720 420-143 44-386
420-164
HT417 721 420-106 44-390
420-119
HT451 701 412-103 42-117
412-131
HT463 --- 413-102 43-754
413-134
HT513 --- 442-153 42-628
442-139
1/4"TIPS
Tip drawings are actual size.American
Hexacon® Beauty® Esico® PLATO® PLATO® TIP
HT118 630 --- 32-402
HT190 619 320-136 33-395320-144
HT195 643 310-108 33-131310-115
HT207 617 320-109 33-364320-118
HT276 604 311-103 31-150311-124
HT281 625 --- 33-415
HT474 605 312-105 32-168607 312-116
HT479 626 342-112 32-660342-119
HT548 615 322-220 32-338322-146
HT107* 613 322-104 32-306322-117
3/16" (4.8mm) Plato® Tips to fit Soldering Irons For• Hexacon® • American Beauty® • Esico®
All points are 1/32" (0.8)thick unless otherwise
noted.
( ) = mm
Tip samples are available.
Custom tip designs onrequest.
All dimensions are shownbefore tinning and are
subject to manufacturingtolerances.
* Similar
3/16"TIPS
36 WWW.PLATOPRODUCTS.COM
1/4" (6.4mm) Plato® Tips to fit Hexacon®, American Beauty®, Esico® Soldering Irons
Tip drawings are actual size.American
Hexacon® Beauty® Esico® PLATO® PLATO® TIP
HT552 --- 426-161 46-626
426-173
--- --- --- 44-3113
HT586 --- 420-201 44-706
HT691 706 411-107 41-199
411-123
HT359 716 422-108 42-355
422-132
HT553* 704 410-140 44-152
*similar 410-126
HT131 --- 440-138 44-653
HT202 738 420-130 44-611
HT356 --- 422-113 42-619
HT426 --- 420-114 44-715
HT452 739 442-147 42-685
HT453 --- --- 40-712
HT468 67-S --- 44-105
HT473 --- 413-117 43-799
HT685 --- 412-110 42-683
HT773 --- 426-189 46-912
HT841 730 --- 42-713
--- --- --- 40-5198
1/4"TIPS
All points are 1/32" (0.8)thick unless otherwise
noted.
( ) = mm
Tip samples are available.
Custom tip designs onrequest.
All dimensions are shownbefore tinning and are
subject to manufacturingtolerances.
SPECS / SAMPLES • 800-858-4043 37
5/16" (8.0mm) Plato® Tips to fit Hexacon® Soldering Irons
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mm Tip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
Tip drawings are actual size.
Tip drawings are actual size.Hexacon® PLATO® PLATO® TIP
HT506 55-316
HT547 55-118
HT550 55-321
HT556 55-336
--- 55-133
Hexacon® PLATO® PLATO® TIP
HT108 66-409
HT129 66-367
HT145 63-155
HT151 66-145
HT566 66-201
HT918 66-325(similar to)
5/16"TIPS
3/8" (9.5mm) Plato® Tips to fit Soldering Irons forHexacon® • American Beauty® • Esico®
All points are 1/32" (0.8) thickunless otherwise noted.
( ) = mm
Tip samples are available.
Custom tip designs on request.
All dimensions are shown beforetinning and are subject tomanufacturing tolerances.
3/8"TIPS
38 WWW.PLATOPRODUCTS.COM
3/8" (9.5mm) Plato® Tips to fit Soldering Irons ForHexacon® • American Beauty® • Esico®
Tip drawings are actual size.
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
Tip drawings are actual size.
All points are 1/16" (1.6) thick unless otherwise noted. ( ) = mmTip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturing tolerances.
Hexacon® PLATO® PLATO® TIP
HT178 1010-397
HT256 1010-286
HT891 1010-104
HT499 1010-184
Hexacon® PLATO® PLATO® TIP
HT449 66-300
HT470 66-349
HT472 66-911
--- 66-627
--- 66-704
5/8" (15.9mm) Plato® Tips to fit Soldering Irons For• Hexacon® • American Beauty® • Esico® • Weller® Marksman SP175
3/8"TIPS
5/8"TIPS
SAMPLES • 800-858-4043 39
DESOLDER INDEX PAGE
Air -Vac® 40A.P.E.® 40Pace® 40O.K. Industries® 41Edsyn® 41Hakko® 42Weller® 43Plato® 43
• Only Brand ofReplacement TipsYou Need!
• Top Quality
• Long Life
• Clog Resistant
• Competitively Priced
• Only Brand ofReplacement TipsYou Need!
• Top Quality
• Long Life
• Clog Resistant
• Competitively Priced
Your Source for Desoldering Iron Tips
These newly designed tips are engineered with a side wall that is more than 50% heavier (thicker) than our standard tips.These offer the operator a tip that is more resistant to deformation when used to pry or move leads. These long-life tipswill offer improved heat recovery and life. They are available in 1" (25.4 mm) and 1.75" (44.5 mm) lengths and in thefollowing inside dimensions: .040" (1.0 mm), .050 (1.3 mm), .060 (1.5 mm). These new tips are identified with HW addedto the part number. Samples are available. ( ) = mm
Pace® Air-Vac® APE® PLATO® L D1 PLATO® TIP
Plato® Tips to fit Pace® SX-20, SX-25, SX-25V SODR-X-TRACTORS®
1121-0215 30, 36, 45 1212-0440 20-0110-HW 1.00" (25.4) .040" (1.0)1212-084
1121-0216 — 1212-0550 20-0113-HW 1.00" (25.4) .050" (1.3)1212-083
1121-0217 60, 61 1212-0660 20-0111-HW 1.00" (25.4) .060" (1.5)1212-082
Pace® Air-Vac® APE® PLATO® L D1Plato® Tips to fit Pace® SX-40A, SX-55A, SX-65A, SX-70
SODR-X-TRACTORS®
1121-0254 — — 20-040-HW 1.75" (44.5) .040" (1.0)
— — — 20-050-HW 1.75" (44.5) .050" (1.3)
1121-0255 — — 20-060-HW 1.75" (44.5) .060" (1.5)
Pace® PLATO® L D1 D2 PLATO® TIP
Plato® Tips to fit Pace® SX-20, SX-25, SX-25V SODR-X-TRACTORS®
1121-0213 20-0109 1.00" (25.4) .025" (0.6) .060" (1.5)1121-0480 20-0114 1.00" (25.4) .030" (0.8) .060" (1.5)--- 20-0815 1.00" (25.4) .036" (0.9) .065" (1.7)1121-0479 20-0110 1.00" (25.4) .040" (1.0) .080" (2.0)1121-0216 20-0113 1.00" (25.4) .050" (1.3) .090" (2.3)1121-0217 20-0111 1.00" (25.4) .060" (1.5) .100" (2.5)1121-0091 20-0112 1.00" (25.4) .090" (2.3) .125" (3.2)
Pace® PLATO® L D1 D2
Plato® Tips to fit Pace®. SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS®with Plato Adapter 33-0001
1121-0485 20-025 1.75" (44.5) .030" (0.8) .080" (2.0)1121-0486 20-040 1.75" (44.5) .040" (1.0) .080" (2.0)--- 20-050 1.75" (44.5) .050" (1.3) .090" (2.3)1121-0255 20-060 1.75" (44.5) .060" (1.5) .100" (2.5)
Pace® PLATO® L D1 D2
Plato® Tips to fit Pace®. SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS®with Plato Adapter 33-0001
1121-0261 20-0030 1.75” (44.5) .030" (0.8) .080" (2.0)1121-0262 20-0040 1.75” (44.5) .040" (1.0) .080" (2.0)1121-0267 20-0060 1.75" (44.5) .060" (1.5) .090" (2.3)
Premium Quality for Long Life
Made of oxygen-free high-conductivity copper, protected inside and outside tominimize erosion by solder.
Tip samples are available. Custom tip designs on request. ( ) = mm
See cross-reference table in back of catalog for competitive cross-references to Air -Vac® and A.P.E.®
Packaged 10 pieces per pack.
Desoldering Irons • Pace® • Air-Vac® • A.P.E.®PACE®A.P.E.®AIR-VAC®
Desoldering Irons • Pace® • Air-Vac® • A.P.E.®PACE®A.P.E.®AIR-VAC®
Premium Quality for Long Life
Made of oxygen-free high-conductivity copper, protected inside and outsideto minimize erosion by solder.
Tip samples are available. Custom tip designs on request. ( ) = mm
See cross-reference table in back of catalog for competitive cross-references to Air -Vac® and A.P.E.®
Packaged 10 pieces per pack.
40 WWW.PLATOPRODUCTS.COM
(mm) (mm)
Edsyn® PLATO® D1 D2 PLATO® PREMIUM GRADE TIP
ZD08 EZ-030 .030" (0.8) .085" (2.2)
ZD12 EZ-030 .030" (0.8) .085" (2.2)
ZD10 EZ-040 .040" (1.0) .095" (2.4)
ZD13 EZ-040 .040" (1.0) .095" (2.4)
ZD11 EZ-050 .050" (1.3) .115" (2.9)
ZD14 EZ-050 .050" (1.3) .115" (2.9)
--- EZ-060 .060" (1.5) .115" (2.9)
ZD09 EZ-070 .070" (1.8) .125" (3.2)
ZD18 EZ-070 .070" (1.8) .125" (3.2)
Premium Quality for Long Life
Iron plated outside and stainless steel tube insert prevents solder path erosion by solder.Tip samples are available. Custom tip designs on request. All dimensions are shown beforetinning and are subject to manufacturing tolerances.
Tip drawings are actual size.
(mm) (mm) (mm)
OK Ind.® PLATO® L D1 D2 PLATO® PREMIUM GRADE TIP
BTR-D-027 OO-0737 .75" (19.0) .027" (0.7) .080" (2.0)
BTR-D-031 OO-0738 .75" (19.0) .031" (0.8) .085" (2.2)
BTR-D-039 OO-0739 .75" (19.0) .039" (1.0) .090" (2.3)
BTR-D-047 OO-0740 .75" (19.0) .047" (1.2) .100" (2.5)
BTR-D-063 OO-0741 .75" (19.0) .063" (1.6) .115" (2.9) Premium Quality for Long Life. Iron plated outside and stainless steel tubeinsert prevents solder path erosion by solder. Tip samples are available.Custom tip designs on request. All dimensions are shown before tinning andare subject to manufacturing tolerances.
Tip drawings are actual size.
30-0060
Pace® PLATO® Pace® PLATO® (mm)Economy Economy Premium PremiumGrade Grade Grade Grade D1 D2 PLATO® PREMIUM GRADE TIP
1121-0505 30-0003 --- --- .030" .075"(0.8) (2.9)
1121-0494 30-0004 --- --- .040" .085"(1.0) (2.2)
1121-0506 30-0006 --- --- .060" .105”(1.5) (2.7)
1121-0367 30-0300 1121-0462 30-030 .030" .065" (0.8) (1.7)
1121-0342 30-0400 1121-0463 30-040 .040" .085" (1.0) (2.2)
--- --- --- 30-050 .050" .095" (1.3) (2.4)
1121-0368 30-0600 1121-0464 30-060 .060" .115" (1.5) (2.9)
1121-0507 30-0900 --- --- .090” .190”(2.3) (4.8)
1121-0369 30-0060 1121-0465* 30-6000 .060" .188" (1.5) (4.8)
Economy Grade TipsEconomy grade tips do not have a stainless steel tube insert. They are made of oxygen-freehigh-conductivity copper, nickel-plated inside and outside to minimize corrosion by solder.
Tip samples are available. Custom tip designs on request. All dimensions are shown beforetinning and are subject to manufacturing tolerances. ( ) = mm
Tip drawings are actual size.
PLATO® ECONOMY GRADE TIP
Desoldering Stations SODR-X-TRACTORS® • SX-70 • SX-80
SPECS / SAMPLES • 800-858-4043 41
PACE®
Desoldering Handpieces • BTR-15 • BTR-25 • BTR-35 • BTR-55 • DG 20065 • DG 24100 • DG 28110 Desoldering Irons • SA-600 • SA-1201
O.K.INDUSTRIES®
Desoldering Irons • ZD500 • ZD505 • ZD905 • ZD906 EDSYN®
Premium Grade for Long LifeIron plated outside and stainless steel tubeinsert prevents solder path erosion by solder.
(mm) (mm)Hakko® OK Ind.® PLATO® D1 D2 PLATO® PREMIUM GRADE TIP
481-T-0.8 SAT-4-031 TM-007 .030" (0.8) .070" (1.8)
481-T-1.0 SAT-4-039 TM-010 .040" (1.0) .090" (2.3)
481-T-1.3 SAT-4-051 TM-013 .050" (1.3) .100" (2.5)
481-T-1.6 SAT-4-063 TM-015 .060" (1.5) .120" (3.0)
--- --- TM-023 .090" (2.3) .170" (2.8)
Premium Quality for Long Life
Iron plated to resist erosion by solder. Tip samples are available. Custom tip designs on request. All dimensions are shown before tinningand are subject to manufacturing tolerances.
Tip drawings are actual size.
(mm) (mm)Hakko® OK Ind.® PLATO® D1 D2 PLATO® PREMIUM GRADE TIP
483-T-0.8 SAT-4V-031 HK-0008 .030" (0.8) .090" (2.3)800-T-0.8
483-T-1.0 SAT-4V-039 HK-0010 .040" (1.0) .090" (2.3)800-T-1.0
483-T-1.3 SAT-4V-051 HK-0013 .050" (1.3) .100" (2.5)800-T-1.3
483-T-1.6 SAT-4V-063 HK-0016 .060" (1.5) .120" (3.0)800-T-1.6
483-T-1.0S --- HKL-0010 .040" (1.0) .090" (2.3)800-T-1.0S
Premium Quality for Long Life
Iron plated to resist corrosion by solder.
Tip samples are available.
Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturingtolerances.
Tip drawings are actual size.
(mm) (mm)Hakko® PLATO® D1 D2 PLATO® PREMIUM GRADE TIP
A-1002 HK-0878 .030" (0.8) .070" (1.8)
A-1003 HK-0879 .040" (1.0) .080" (2.0)
A-1004 HK-0880 .030" (0.8) .090" (2.3)
A-1005 HK-0881 .040" (1.0) .100" (2.5)
A-1006 HK-0882 .050" (1.3) .120" (3.0)
A-1007 HK-0883 .060" (1.5) .120" (3.0)
Premium Quality for Long Life
Iron plated outside and stainless steel tube insert prevents solder patherosion by solder.
Tip samples are available. Custom tip designs on request.
All dimensions are shown before tinning and are subject to manufacturingtolerances.
Tip drawings are actual size.
Desoldering Irons • 470B • 471 • 472B • 473 • 474 • 475 • 701 Used with Handpiece • 808 • 809
42 WWW.PLATOPRODUCTS.COM
HAKKO®
Desoldering Irons For Hakko® • 483 • 700 • 707 • 800 • 800LO.K. Industries® • SA-150/250/350/450 • DG-20/40/60 HAKKO®
Desoldering Irons For Hakko® • Ace 484O.K. Industries® • SA-100 • SA-300 • SA-400 • DG10 • DG30 • DG50
O.K. INDUSTRIES®
HAKKO® O.K. INDUSTRIES®
1/2"(12.7)
D1 - Hole DiameterD2
Solder Path Protected ByStainless Steel Tube
PLATO® PLATO® (mm) (mm)M5 Threads 12-24 UNC Thread
Weller® Metric Version U.S. Version D1 D2 PLATO® PREMIUM GRADE TIP
DS-110 TM-10 T-0138 .025" (0.6) .070" (1.7)
DS-112 TM-12 T-0139 .040" (1.0) .090" (2.3)
DS-113 TM-13 T-0140 .050" (1.3) .105" (2.7)
DS-114 TM-14 T-0141 .080" (2.0) .132" (3.2)
DS-117 TM-18 — .060" (1.5) .115" (2.9)
DS-115* TM-17 — .025" (0.6) .075" (1.9)
DS-116* TM-16 T-0136 .050" (1.3) .105" (2.7)
DS-117* — T-0137 .025" (0.6) .105" (2.7)
Premium Quality for Long LifeIron Plated outside and stainless steel tube insert prevents solder patherosion by solder. Tinned for good heat transfer. Threads and bodyimmunized. Tip samples are available. Custom tip designs on request. Alldimensions are shown before tinning and are subject to manufacturingtolerances.
Tip drawings are actual size.
PLATO® PLATO® (mm) (mm)M5 Threads 12-24 UNC Thread
Weller® Metric Version U.S. Version D1 D2 PLATO® PREMIUM GRADE TIP
DST 1 TM-1 T-0261 .038" (1.0) .080" (2.0)
DST 2 TM-2 T-0262 .045" (1.1) .100" (2.5)
DST 4 TM-4 T-0264 .060" (1.5) .135" (3.4)
DST 5 TM-5 T-0265 .080" (2.0) .150" (3.8)
Economy Grade - Nickel plated copper
Solder path nickel-plated to reduce erosion by solder.
Tip samples are available. Custom tip designs on request. All dimensions are shown before tinning and are subject to manufacturingtolerances.
Tip drawings are actual size.
(mm) (mm) (mm)
PLATO® L D1 D2 PLATO® PREMIUM GRADE TIP
VT-0025 .500" (12.7) .025" (0.6) .070" (1.8)
VT-0033 .500" (12.7) .033" (0.8) .070" (1.8)
VT-0040 .500" (12.7) .040" (1.0) .090" (2.3)
VT-0050 .500" (12.7) .050" (1.3) .100" (2.5)
VT-0060 .500" (12.7) .060" (1.5) .120" (3.0)
VT-0090 .500" (12.7) .090" (2.3) .170" (4.3)
VT-1050 .750" (19.0) .050" (1.3) .100" (2.5)
Premium Quality for Long LifeIron Plated outside and stainless steel tube insert prevents solder path erosionby solder. Tinned for good heat transfer. Threads and body immunized.Custom tip designs on request. All dimensions are shown before tinning and aresubject to manufacturing tolerances.
Tip drawings are actual size.
Desoldering Stations • DS-102 • DS-200 • DS-200K • DS-501 • DS-600 • DS-601P • DS-1201 • DS-1201ESD • DS-1203A • DS-700M • DS-800 WELLER®
SPECS / SAMPLES • 800-858-4043 43
Desoldering Stations • DS-40P • DS-60 • DS-TCP WELLER®
Desoldering Irons • V-581 • V-682 • V-985 • V-185SF PLATO®