Young Modulus of Elasticity for Metals and Alloys
3
► Carbon Steel ► Pipe Stress ► Iron Steel
-
Upload
elton-situmeang -
Category
Documents
-
view
34 -
download
0
description
Need for water Hammer Calculation (carbon Steel)
Transcript of Young Modulus of Elasticity for Metals and Alloys
9/21/13 Young Modulus of Elasticity for Metals and Alloys
www.engineeringtoolbox.com/young-modulus-d_773.html 1/3
Resources, Tools and Basic Information for Engineering and Design of Technical Applications!
► Steel Pipe ► Steel Tool Box ► Mild Steel ► Steel Piping
Search
Custom Search
Share this on Google+Share Tweet
Sarankan 51
Young Modulus of Elasticity for Metals and Alloys
Elastic properties and Youngs modulus for common metals and alloys as cast iron, carbon
steel and more
Sponsored Links
It is convenient to express the elasticity of a material with the ratio stress to strain, a parameter also termed thetensile elastic modulus or Young's modulus of the material. This is usually given the symbol - E.
Young's modulus can be used to predict the elongation or compression of an object.
Modulus of Elasticity for some common metals at various temperatures according ASME B31.1-1995 are indicatedbelow:
1 psi (lb/in2) = 1 psi (lb/in2) = 144 psf (lbf/ft2) = 6,894.8 Pa (N/m2) = 6.895x10-3 N/mm2
T(oC) = 5/9[T(oF) - 32]
Young's Modulus of Elasticity - E - (106 psi)
Metal
Temperature (oC)
-200 -129 -73 21 93 149 204 260 316 371 427 482 538 593 649
Temperature (oF)
-325 -200 -100 70 200 300 400 500 600 700 800 900 1000 1100 1200
Cast iron
Gray castiron
13.4 13.2 12.9 12.6 12.2 11.7 11.0 10.2
Steel
Carbonsteel C <=
0.3%31.4 30.8 30.2 29.5 28.8 28.3 27.7 27.3 26.7 25.5 24.2 22.4 20.4 18.0
Carbonsteel C =>
0.3%31.2 30.6 30.0 29.3 28.6 28.1 27.5 27.1 26.5 25.3 24.0 22.2 20.2 17.9 15.4
Carbon-moly steels
31.1 30.5 29.9 29.2 28.5 28.0 27.4 27.0 26.4 25.3 23.9 22.2 20.1 17.8 15.3
Nickelsteels Ni 2%
- 9%29.6 29.1 28.5 27.8 27.1 26.7 26.1 25.7 25.2 24.6 23.0
Cr-Mosteels Cr
1/2% - 2%31.6 31.0 30.4 29.7 29.0 28.5 27.9 27.5 26.9 26.3 25.5 24.8 23.9 23.0 21.8
Home
• Acoustics
• Air Psychrometrics
• Basics
• Combustion
• Drawing Tools
• Dynamics
• Economics
• Electrical
• Environment
• Fluid Mechanics
• Gas and Compressed Air
• HVAC Systems
• Hydraulics andPneumatics
• Insulation
• Material Properties
• Mathematics
• Mechanics
• Miscellaneous
• Physiology
• Piping Systems
• Process Control
• Pumps
• Standards Organizations
• Steam and Condensate
• Thermodynamics
• Water Systems
Convert Units
Temperature
0.0
oC
oF
Convert!
Length
1.0
m
km
in
ft
yards
miles
nautical miles
Convert!
Volume
1.0
m3
liters
in3
ft3
us gal
Convert!
Velocity
1.0
m/s
km/h
ft/min
ft/s
mph
knots
Convert!
► Carbon Steel
► Pipe Stress
► Iron Steel
9/21/13 Young Modulus of Elasticity for Metals and Alloys
www.engineeringtoolbox.com/young-modulus-d_773.html 2/3
Search
Cr-Mosteels Cr 21/4% - 3%
32.6 32.0 31.4 30.6 29.8 29.4 28.8 28.3 27.7 27.1 26.3 25.6 24.6 23.7 22.5
Cr-Mosteels Cr5% - 9%
32.9 32.3 31.7 30.9 30.1 29.7 29.0 28.6 28.0 27.3 26.1 24.7 22.7 20.4 18.2
Chromiumsteels Cr
12%, 17%,27%
31.2 30.7 30.1 29.2 28.5 27.9 27.3 26.7 26.1 25.6 24.7 23.2 21.5 19.1 16.6
Austeniticsteels
(TP304,310, 316,321, 347)
30.3 29.7 29.1 28.3 27.6 27.0 26.5 25.8 25.3 24.8 24.1 23.5 22.8 22.1 21.2
Copper and copper alloys
Comp. andleaded-Sn
bronze(C83600,C92200)
14.8 14.6 14.4 14.0 13.7 13.4 13.2 12.9 12.5 12.0
Naval brassSi & Albronze
(C46400,C65500,C95200,C95400)
15.9 15.6 15.4 15.0 14.6 14.4 14.1 13.8 13.4 12.8
Copper(C11000)
16.9 16.6 16.5 16.0 15.6 15.4 15.0 14.7 14.2 13.7
Copper redbrass Al-bronze
(C10200,C12000,C12200,C12500,C14200, C23000, C61400)
18.0 17.7 17.5 17.0 16.6 16.3 16.0 15.6 15.1 14.5
Nickel and Nickel Alloys
Monel 400(N04400)
27.8 27.3 26.8 26.0 25.4 25.0 24.7 24.3 24.1 23.7 23.1 22.6 22.1 21.7 21.2
Titanium
Unalloyedtitanium
grades 1, 2,3 and 7
15.5 15.0 14.6 14.0 13.3 12.6 11.9 11.2
Aluminum and aluminum alloys
Grades443, 1060,
1100, 3003,3004, 6063
11.1 10.8 10.5 10.0 9.6 9.2 8.7
1 psi (lb/in2) = 6,894.8 N/m2 (Pa)
T(oC) = 5/9[T(oF) - 32]
Note! You can use the pressure unit converter to switch between different units of Modulus of Elasticity.
Sponsored Links
Search the Engineering ToolBox
Custom Search
Related Topics
Material Properties - Material properties - density, heat capacity, viscosity and more - for gases, fluids andsolids
Related Documents
Bolt Stretching - Bolt stretch according Hooke's LawBulk Modulus - Metals and Alloys - Bulk modulus of some common metals and alloysModulus of Elasticity - Young Modulus for some common Materials - Young Modulus (Tensile Modulus) -Elastic Properties - for some common materials - steel, glass, wood and more ..Modulus of Rigidity - Shear Modulus or Modulus of Rigidity is the coefficient of elasticity for a shearing ortorsion forceStress, Strain and Young's Modulus - Stress is force per area - strain is deformation of a solid due tostressThermal Stresses - Stress due to restricting thermal expansionThermoplastics - Physical Properties - Physical properties of some common thermoplastics - ABS, PVC,CPVC, PE, PEX, PB and PVDF
Engineering ToolBox - SketchUp Edition - Online 3D modeling!
Seals Supplierswww.Alibaba.com
Choose from 1M+ Verified Suppliers. Contact Directly & Get Live Quotes!
Pressure
1.0
Pa (N/m2)
bar
mm H2O
kg/cm2
psi
inches H2O
Convert!
Flow
1.0
m3/s
m3/h
US gpm
cfm
Convert!
Free IndustryMagazines
Power EngineeringInternational
Chemical Engineering
E&P (Hart's E&P)
EngineeringStandards
Related Searches:
Electric Power
Generation
Generate Power
Table Of The
Elements
Solar Energy
Systems
Piping Systems
?
We
bC
ake
Ad
s Trust Rating
94%engineeringtoolbox.com
9/21/13 Young Modulus of Elasticity for Metals and Alloys
www.engineeringtoolbox.com/young-modulus-d_773.html 3/3
Engineering ToolBox - SketchUp Edition - enabled for use with the amazing, fun and free SketchUp
Translate the ToolBox
Arabic - Chinese (Simplified) - Chinese (Traditional) - Dutch - French - German - Italian - Japanese - Korean -Portuguese - Russian - Spanish - - Select Your own language . .
About the ToolBox
We appreciate any comments and tips on how to make The Engineering ToolBox a better information source.Please contact us by email
if You find any faults, inaccuracies, or otherwise unacceptable information.
The content in The Engineering ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY.Important information should always be double checked with alternative sources. All applicable national and localregulations and practices concerning this aspects must be strictly followed and adhered to.
Advertise in the ToolBox
If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords.
