YnHub Guide

2013-04-22 1:35 PMYnHub Guide

Page 1 of 22http://www.jsdator.se/YnHub/sidor/Setup.htm

Here i will try and explain how you setup your hub and get started.

I wont explain howe these settings works, if you want a little better explanation ofsome settings, get into the GUI section on the page instead. I will skip some parts ofYnHub, cause this should just be a quick up and go guide. So you have to fine tuneyour hub yourself later on. If you use these settings then the Admin and OPusercommand will fit, you will find them on this site.

Step 1First of all you need to download YnHub, the latest version is 1.036YnHub 1.036 (1.0.36.152)TTH: ZMRK6OVCTEPM3D2G5REVMLECXE5HWE2MPM4PIII (magnet)

After unpacking the rar file, you will se this.Just press the YnHub.exe file.

To the top

Step 2 - Hub



1. Here you will see the uptime of your hub.2. Here you start and stop your hub

To the top

Step 3 - Settings

1.Hub control



Autostart Lock hub Prompt onshutdown Minimize to tray Userlimit What ever you think is enoughWorkpace NormalPort(s) 411 is default. to separate use ; to use more then one port(411;23;1411)

2.Here you will be abel to give you hub a name and the "bot" in your hub.The first box will name you hub. here it will be called The YnHub demo hub.The second box tells what you will call your bot, in this case -YnHub-

3. Hub address, description, language, saves, convert.In the first box you add your hub address, it can be a DNS or your external IP The second box you can type a short description of your hub. This part will bevisible in the hublist later on if you choose to register your hub. Core language will change the language in your hub, but it will not change thelanguage in the GUI. You can get the different languageshere. Mark the auto save box and set it to 60 minutes, then you wont need to press thesave button every time you make a change. But remember to press the save buttonbefore a reboot of the hub, this is where most people do wrong when they havemade a reboot and when the hub is started again, some accounts have disappeared. Now you are done here, lets get going to the next step.

To the top

Step 4 - Redirects



1. Here you choose if you want to use the different redirects or not by marking thebox.

2. Here you add the addresses you want the user should be redirected to. This will be all up to you, who you want to redirect or not.If you want multiple addresses on hub full for an example. then separate with apipe. on.hub.full1:411|on.hub.full2:411| and so on then the users will be sent torandom addresses. But you dont need to type in a address, you can write what ever you want.On banned example. We don't want you in here.Your ass is banned in this hub sofu** off.

To the top

Step 5 - Notifications



These settings will send a feed message to a chat-room you have chosen. It will beexplained further down.

1. Protocol notifications (before kicking)Notify invalid key (if kicking)Notify invalid MyINFONotify invalid private messageNotify invalid mainchat messageNotify invalid search result (SR)Notify incorrect IP in connectionattemptNotify invalid passive connectionattemptNotify incorrect characters in nick

2. Spam notificationsNotify on MyINFO spamNotify on search spamNotify on mainchat spam.Notify on private messagespamNotify on nicklist spamNotify on junk data spam



3. Other notificationsSuppress client kick message inmainchatNotify operators on kick in mainchatNotify operators on ban in mainchat

4. FeedUse the feed command ifsupportedSave feed to diskFeed name when sent to achatroom Type any name you want

5. MiscellaneousNotify incorrect pass after xtimes

To the top

Step 6 - Text command



You can leave this step if you like. and go to the text command on this page instead.

1. Here you will se all of your added text commands

2. Here you are abel to choose edit level, receive level, access level. who you wantthe command to be broadcast to, and so on.

3. Here you set a name for your command. Its the name that triggers the text in thehub. +trigger

4. Here you type what ever should be in the command.

To the top

Step 7 - Security



1. General security - Mark these options Kick user if key is invalidCheck sender IP on Search andconnectToMePerform DNS lookup -Check data before lock

2. Maintenance & Timeouts - Mark all these options and leave the time value as it is. Handshake timouts Drop non responding Temporary ban onkick

3. Share trace - Mark all these options and leave the time value as it is. Enable share traceNotify on shareupdateAutoprune

4. Auto bans - Mark all these options and leave the time value as it is. Ban on kick no Ban on incorrect passno



5. Spam control - mark all these options and leave the time values as they are. New MyINFOs Make this one "grayed "Searching Make this one "grayed "Mainchat Not grayedPrivate messages Make this one "grayed "Nicklist Make this one "grayed "Junk data Not "grayed"Junk data directkick Not "grayed"Max spamwarningsYou click twice in the box to make the box grayed.

To the top

Step 8 - Restrictions

1. Length restrictions mark all these options and leave the values as they are

Nick max length Search max length MyINFO max length



Mainchat length Private message maxlength

2.

Allowed nick characters Here you select what chars you will let your users to have in their nicks.so just mark the box on which characters you will allow in the hub. But you can leave this option as it is for now.

3. Passive search restrictions- mark all these options an

Max search replies Max length any file type Min length specific filetype

d leave the values as they are.

4.MyINFO distribution - mark all these option and make all these options grayedHere we can gain some bandwidth, if ban with is your limitation.Pool MyINFO changes for If its grayed only the OPs will se thisDisable description If its grayed only the OPs will se thisDisable description tag If its grayed only the OPs will se thisDisable email If its grayed only the OPs will se thisDisable connection speedinformation



To the top

Step 9 - Miscellaneous

1. Hub command visibility - mark all these options and set the drop-down menu tonobody

Force reply to PMIntegrated command visibility

2. Integrated command visibility - Mark this option and set the drop-down menu tooperators.

Force reply to PM

3. General searching - mark this option and leave the search value as it is.Maxhits on hub integrated commandssearches Autosend own userIP on login



To the top

Step 10 - Chat-rooms

Mark every chatroom and change the welcome message if you like.and only havethe show feed box marked on the OP-chat1. Here you will see all you different chat-rooms2. No need to change anything here, but you can type in a welcome message if youlike.3. No need to change anything here either.Show chatroom asoperatorShow feed message Just have this option marked for the OP-chat

To the top

Step 11 - Hublist



1.Here you will se all available hublists you can get registered at.

2. Enable hublistregistration3. Use this hublist registration server Fix for dreamland: select the old dreamland hub reg.Name Description Host DNS/IP change the old address to dreamland.gotdns.orgPort Allow pinger to connect toother users Use a nick/nick patterns forhublist pinger Use a IP/IP pattern for hublistpinger change the IP of the pinger to 213.226.67.113Use host DNS to update pingerIP Then press the "save" button Fix for hublist.org: You have to make a new one



Name Hublist.orgDescription Host DNS/IP reg.hublist.orgPort 2501Allow pinger to connect toother usersUse a nick/nick patterns forhublist pinger

{HublistPinger}

Use a IP/IP pattern forhublist pinger 80.222.*;80.223.*;82.141.*;82.208.4.112;193.6.50.47;212.50.*;213.112.*;213.113.*;213.114.*;213.115.*Use host DNS to updatepinger IPThen press the "save as"button

To the top

Step 12 - User stats

1. Here you are abel to choose how you should store your user stats , you have toenable this feature or you wont be abel to use the !ui in the hub.TypePrune 2. MySQL



No need to change anything unless you have MySQL on your computer, this has its advantages. When you reboot the hub you wont lose your user stats as you wouldif you stored it locally.

To the top

Step 13 - Users

1. Default connection restrictionRequire an account or register (reg only) Mark this if you want a privatehub .Enable register (allows users to register theirnicks)

mark this, If you want your usersto register themselves (+regme+unregme)

Enable ISP/IP checkAllow IP's not found in ISP listUse case sensitive prefix validationRequired prefixMin share size Min slots Max slots Max share size Max hubs Slot ratio Allow "tag-less" clients to bypass hub/slotrestrictionsMay connect using passive mode



2. Default passwordRequired password:

To the top

Step 14 - Profiles

1. Here you will see all of your different accounts.2. Here you choose what level and what the account should be named.3. Here you choose what the different accounts can do. I will go through everyonehere and we shall concentrate on the owner, OP and VIP accounts. 3.1 Owner OP VIPProfile settings May use hubcommandsIs operatorMay see hidden usersMy hide selfCan enter even if hubis fullForce hide shareMay hide shareConnectionrestrictions Set min shareSet max share



Set min slotsSet max slotsSet slotratioHub control Save settingsChange userlimitSet TopicRedirect allSet WorkpaceLock hubLock mainchatInformation Hub infoUserinfoIP infoNick infoTraffic infoTraffic stats 3.2 Owner OP VIPAccounts Add accountRemove accountList accountSet profileSet required IP/IPrangeShow required IP/IPrangeSet commentSet expire dateSet ownerSet passwordShow passwordShow profilesUser control Block userRedirect userDrop userKick userBan nickBan IP/IP range



3.4 Owner OP VIPRedirects Hub fullIncorrect ISP/IPLow shareHigh shareReg. onlyPassiveNo tagHigh hubsLow slotsHigh slotsLow slot ratioBannedMiscellaneous Admin chat roomsAdmin text filesAdmin registeredUse say command

Ban DNSBan clientTempbanMute userLuarize userKennylize user 3.3 Owner OP VIPISPs Add ISPRemove ISPList ISPSet min shareSet max shareSet max hubsSet min slotsSet max slotsSet slotratioIP on ISP's Add IP to ISPremove IP from ISPShow IP's on ISP



Use MC commandUse warn commandUse informUse PM commandUse OPM command 3.5 Owner OP VIPPrivileges ( overrides) Flood checkPM length limit checkMainchat length limitcheckIP check onsearch/connectNick check in PM/MCBypass ISP/IP checkOverride default/ISPtag restrictionsNickbanIP/IP range banDNS banClient banTempbanMin share Min slots Max slots Max sharesizeMax hubsSlot ratioAllow"tag-less" clientsto bypass hub/slotrestrictionsMay connect usingpassive mode 3.5 Owner OP VIPProtocol access Search in active modeSearch in passivemodeSend mainchat



messagesSend private messagesConnect in activemodeConnect in passivemodeFeature access May access UserIPMay access UserIP2May access MCToMaster overrides Cannot be kickedCannot be droppedCannot be redirectedFeed Receive feedReceive action feedReceive kick feedReceive event feedReceive GUI feedReceive error feed 3.6 Owner OP VIPEnable joinannouncementIn the content box you can type what ever you want.Example: Here is the almighty his profile level is: Or just leave it empty if you dont want it to announce when someone gets into thehub.

To the top

Step 15 - Accounts



1. Here you will see all your added accounts Lets se if we can add an account for you here.2. Type a nick you want. example [OP]kalle , then choose a password you want.3. On profile you choose Owner and let the owner box stay as it is.In IP patter you can choose your Internal IP if you like, then nobody then you canenter on that account. but you wont be abel to enter from a different machine if youare at a friend and so on.So if you dont want that leave it blank.The comment field you can leave blank to.The greeting box will send a private message to you when you log into the hub.Only you will be abel to se it. Then hit the save as button.

To the top

Step 16 - Registered



1. Enable register. Let your user to reg them self inthe hub.The command is +regme and +unregme2. Here you can search among the self registered users. If you type an asterix * thenit will list all registered users, or just search on nick.3. Here your registered users should be listed when you do a search

To the top

Well this should be it, now you should have a working hub. try and log in on thehub by connecting to you local IP. 127.0.0.1:411 if you haven't changed the portnumber in settings, with your chosen nick and password.All you have to do now is to open up the port you did choose in settings on yourrouter, firewall.Howe do i do that? well look in your manual for your router/firewall, but here is agood page you can look at if you have a router. http://portforward.com/routers.htm.To check so you have forwarded the right port in your router/firewall go to thispage and test it. http://www.canyouseeme.org/

The End

YnHub Guide

Documents

Transcript of YnHub Guide