Yn 17650 project AKOYA
-
Upload
heesen-yachts -
Category
Documents
-
view
220 -
download
1
description
Transcript of Yn 17650 project AKOYA
akoya
SISTERSHIP
Akoya is our fifth 50 metre semi-displacement aluminium yacht.
Her sistership, Satori, is one of the most highly rated of her size, winning
the prestigious Neptune Trophy at the World Superyacht Awards.
Heesen designs and builds the most efficient aluminium hull-forms in the world. Innovative naval architecture provides an
impressive reduction in the power needed to achieve a given speed. Less power required means less fuel – a virtuous circle
that is just one of the advantages of Heesen technology.
The latest engines powering a streamlined shape above and below the water result in a yacht
with a top speed of 23 knots and a range of over 3.100 nautical miles.
SISTERSHIP
With a highly distinctive curved superstructure from sea level to sun deck, Akoya combines sleek minimalism with advanced
technology. Continuous sheets of laminated triple glazing thermo bonded to the superstructure on the main deck create a dynamic
wall of seamless windows that complement the yacht’s flowing lines.
Four clearly defined deck areas provide space for every
occasion. A foredeck for secluded relaxation and a vast
70 square metre sun deck that is impressive in both style
and proportion. Shaded dining is on the upper deck while the
multifunctional main deck terrace combines with the saloon
to create an impressive 25 square metre entertaining space.
SISTERSHIP
499GTThe largest possible interior space under the 500GT threshold.
Maximum space, reduced running costs.
12 GUESTSFull-beam main deck master with bathroom and study.
Full-beam VIP, two double and two twin cabins,
all on the lower deck.
70 SQM Expansive sun deck. Jacuzzi set within full width
sunbeds. Shaded bar and dining area and second
sunbathing terrace aft.
30/06/16Akoya will be delivered on 30th June 2016.
23 KNOTSPower, shape, performance: twin MTU engines,
streamlined subsea hull, top speed of 23 knots.
Space has been optimised throughout: the highest possible internal volume under the 500GT threshold. Heesen ingenuity
always delivers on performance without any compromise in comfort, space and style.
SKY LOUNGE
Interiors are by the acclaimed Italian designer Cristiano Gatto. Three materials have been selected for all interior surfaces:
teak, stainless steel and leather. Furniture and other details are custom-made. The combination of supple leathers contrasting
against the elegant shine of stainless steel detailing is highly contemporary Italian design at its very best.
MAIN SALOON
The main saloon and sky lounge feature Gatto’s reinterpretation of Art Deco with the use of asymmetrical lines and 1930s
inspired furniture. The richness of the interior is heightened by the use of both soft white lacquered panels and natural teak
that has been oiled and honed to reflect the quality of the veneer.
Red Rosso Bulgaro saddle leather detailed with thick stitching adorns the cupboards, wall panelling and key items of bespoke
furniture. The passing of time will only serve to give warmth and character to the look and feel of this indulgent leather.
MAIN SALOON
MASTER SUITE
The master suite is set forward on the main deck. The use of polished Cappuccino marble in the bathroom perfectly matches the
soft colour scheme of the carpets, walls and ceilings throughout the yacht. Heesen has perfected the art of including heavyweight
marble without impacting on the yacht’s performance. Using a technique that demands tremendous precision the stone is honed
to a thickness of just 4mm. As light as a feather, as strong as steel.
MASTER SUITE
Twelve guests sleep in six suites with a design style that continues the overall concept of teak detailing, concentric patterns
and red leather panelling. Additional suites are all on the lower deck and include a full-beam VIP with a very large ensuite
bathroom, two double and two twin cabins.
GUEST CABIN
SUN DECK
UPPER DECK
MAIN DECK
LOWER DECK
GENERAL
Hull type: Twin propeller, hard chine, semi-displacement
Naval Architect: Heesen Yachts
Exterior Styling: Omega Architects
Interior Designer: Cristiano Gatto Design
Classification: ABS A1 Yachting Service AMS
Large Commercial Yacht Code LY3
Hull: Aluminium
Superstructure: Aluminium
DIMENSIONS
Length over all: 49,80m / 163ft 4in
Beam over all: 9,00m / 29ft 6in
Draft: 2,50m / 8ft 2in
Displacement (50% load) 313 tons
ACCOMMODATION
Guests: 12
Cabins: Full-beam master suite and study,
full-beam VIP cabin, 2 double cabins
and 2 twin cabins
TECHNICAL DETAILS
Maximum speed (50% load): 23 knots
Range at 11 knots: 3.100Nm
Fuel capacity: 68.800 litres / 18.200 US Gallons
Fresh water: 16.200 litres / 4.300 US Gallons
PROPULSION DETAILS
Main engines: 2 x MTU 16V 4000 M73L
Maximum power: 2 x 2.880kW
Gearbox: 2 x ZF 9055A
Engine control: MTU Blue Vision
Propellers: Schaffran, five blade fixed pitch ø 1.500mm
Generators: 2 x Kilo-Pak
Power: 2 x 99kW
Bowthruster: ZF Marine, 90kW, hydraulically driven
Steering system: Sperry Marine Systems
Stabilisers: Naiad Dynamics, model 720 with 2 fins of
approx. 3,5m2, zero speed
© Heesen Yachts 2014. This brochure has been prepared for general marketing purposes. The information contained in this brochure (including without limitation any information concerning the dimensions, capabilities and performance
characteristics of the subject yacht) is given in good faith but is not warranted to be accurate. All such information is subject to change at any time without notice. Heesen Yachts gives no warranty or representation, nor shall it be liable, in
contract, tort or any other way, for any claims relating to or arising from any use made of any such information. All intellectual property rights of whatsoever nature and howsoever arising in this brochure belong to Heesen Yachts BV without
whose prior written consent this brochure may not be copied, adapted, distributed, published, displayed, communicated to the public or otherwise used in any way in whole or in part anywhere in the world.
specification
Heesen is recognised as the world leader in aluminium construction,
so it is particularly pleasing that our steel yachts also
consistently win major awards.
In one of the most modern
construction facilities in the world,
every aspect of every yacht is geared towards
achieving our exceptional standards of engineering.
Our 4.4 hectare Oss shipyard has nine sheds and five dry docks. Each year, over
four million parts are meticulously used in the construction of up to eight yachts.
For the quality, at the price, we believe Heesen yachts are the finest value in
the world. The current range includes aluminium and steel, displacement,
semi-displacement and the new revolutionary fast displacement.
heesen a company built by yachts
Rijnstraat 2, 5347 KL OSS • The Netherlands
Phone: +31 412 66 55 44 • E-mail: [email protected]
HEESENYACHTS.COM