YMT Presentation 2

8/3/2019 YMT Presentation 2

http://slidepdf.com/reader/full/ymt-presentation-2 1/20



Abu Sohail Rasel 2010200400001

Bayazid Bustami 2010200400002

Hasibul Musabbir 2010200400003

Mohasin Alam 2010200400005

Omar Faruk 2010200400006

Istiak Ahmed 2010200400007

Sharif Md. Mostafa Zaman Razzaki 2010200400008



Rieter is an industrial group based in Winterthur, Switzerland, and operating on a

global scale. Formed in 1795, the company is a leading supplier of short-staple

spinning machinery and technology components, and has the widest product

range in this industrial sector worldwide. Rieter has a presence in 9 countrieswith 18 manufacturing facilities and a worldwide workforce of about 4 500

employees, some 26% of whom are based in Switzerland. The company

comprises two Business Groups: Spun Yarn Systems develops and manufactures

machinery and systems for processing natural and man-made fibers and their

blends into yarn. Rieter seeks to maintain continuous growth in sales andprofitability, primarily by organic growth, but also through strategic alliances and

acquisitions.



A blowroom has its qualitative influence on the end product. Otherwise it would

have an adverse impact on yarn properties. High-performance Rieter blowroom

line enables cheaper material to be used and reduce cost via raw material as yarn

cost depends 50-70 % on raw material. However it is achievable by professional

and competent raw material management. Rieter blow room line promises gentle,

cleaning and blending of the fibers. It is equally efficient for both natural and

synthetic fibre.

Key features of rieter Blowroom line

Effective machine design & operation result

Major energy savings

European technology with worldwide reliability

Automatically controlled & continuous feeding system



50% Shortcomings in the yarn

50% Quality reducing factors

50% of yarn breakage & trace back

the operation of the blowroom

IF THE IMPLEMENTATION FAILS THEN

THE FOLLOWING PROBLEMS COULD RISE.



THE ULTIMATE SOLUTION WILL BE



The number of different origins of the material in a given blend.

The Rieter blowroom line assembly

arranges by the following principles..

The type of raw material

T

he characteristics of the raw material

Waste content

Dirt content

Material throughput



Economy

Produces upto 1 400 kg/h

(carded sliver).

Bales are laid down over a length of

7.2 to 47.2 meters. Eliminates labor-intensive manual

alignment of the bales.

Qualit y

Effective cleaning and dedusting by

subsequent machines.

Ensures gentle extraction of the

tufts irrespective of the direction of

rotation of the take-off roller.

Consistent cleaning

F lexibilit y

Erocess up to 4 assortments

simultaneously.

The width of the take-off unit can be

selected between 1 700 and 2 300 mm.

Cottons of all origins and man-made fibers

up to a staple length of 65 mm are pro

The UNIfloc A 11 processes the

fiber material gently and

efficiently into microtufts, from

which impurities can be

removed very readily in thesubsequent processes.



The UNIclean B 12 pre-

cleaner cleans the

microtufts in the first

cleaning stage immediately

after the UNIfloc A 11.

Economy

Produce up to 1 400 kg/h

(carded sliver).

Simultaneous efficient cleaning

is up to 2%

Energy-saving.

Qualit y

Fiber-preserving cleaning.

Intensive dedusting High cleaning performance

and low losses of good fibers

F lexibilit y

The working point specific to the

material is automatically selected

Easy machine setting during

operation.



The B 72 / B 76 mixing

machine guarantees

homogeneous, intimate

mixing of the bale feed in a

minimum of space, evenwith unfavorable bale lay-

down.

Economy

The production volume of 800 kg/h

(B 72) or 1 200 kg/h (B 76)

Regular feeding of the downstream

blowroom machines Settings are entered rapidly, easily

and reproducibly on the UNImix.

Qualit y

Produces a good,

permanentlyhomogeneous fiber mix.

Tuft size can be adjusted

at the mixing roller .

F lexibilit y

The easy addition of an opening

or cleaner No limitations when processing

different raw materials.



The UNIblend A 81 with an

accuracy featuring less than 1%

deviation. It enables four

different carding lines to be

supplied with different blends.

Economy

Blending cottons of different

origins enables material costs to

be optimized.

The UNIblend facilitates the

precise recycling of waste.

Qualit y

Very high yarn quality

Homogeneous fabricappearance in the end

product,

Consistently high quality.

F lexibilit y

Produces four different blend

compositions simultaneously 2 to 8 blending modules, each

with an output range of 3 to

300 kg/h.



C 70/ C60 High-performance

card - The card with the

maximum active carding area.

Achieves excellent quality

values at highest production.The sliver quality is

maintained at a high level.

Economy

High production performance with

top quality for ring yarn

Excellent raw material exploitation

Maximal card wire service life with

constant sliver quality is guaranteed.

F lexibilit y

Arrange the card lines with 8 cards,

line production up to 600 kg/h or

with 10 cards C 70, line productionup to 1 200 kg/h.

The card is available with single or

triple licker-in.

Qualit y

Wider carding area

combined with the preciseflats guiding

Continuously good sliver

quality is guaranteed.



In conclusion, Rieter blow room line the most efficient blowroom both technically and

economically. It has earned the belief of its consumers and has gone further away to came

up with market leading technology in module engineering. Its high perfomance Blowroom

line widely spread all over globe and fulfilling the demand of Spun yarn textile industriesof many countries.

YMT Presentation 2

Documents

Transcript of YMT Presentation 2