YB5500 Series - Crane Rental Company | Maxim Crane Works · 6 yb 5500 series range diagram...
-
Upload
truongngoc -
Category
Documents
-
view
219 -
download
0
Transcript of YB5500 Series - Crane Rental Company | Maxim Crane Works · 6 yb 5500 series range diagram...
productguide
features• 2 models …
YB5515: 15.0T (13.6mt) 3-section boom with 41 ft. 0 in. (12.5m) outreach
YB5518: 18.0T (16.3mt) 4-section boom with 54 ft. 6 in. (16.6m) outreach
• 15 ft. (4.6m) offsettable swingaway extension
• 20,000 lb. (9 072kg) deck carrying capacity
• 101 bhp (75.3 kW) GM EFI dual fuel engine or 99 bhp (73.8 kW) Cummins,Tier III, diesel engine
YB5500 Series
Industrial Hydraulic Crane
contentsFeatures 2
Specifications 3
YB5515
Dimensions 5Working Range 6Load Chart 8Load Chart 9
YB5518
Dimensions 10Range Diagram 11Load Chart 12
YB5515 (metric)
Range Diagram 13Range Diagram 14DIN/ISO Load Chart 15DIN/ISO Load Chart 16
YB5518 (metric)
Range Diagram 17DIN/ISO Load Chart 18
www.manitowoc.com
2
YB5500 S
eri
es
features
2
Standard: 41 ft. (12.5m) main boom on the YB551554 ft. 6 in. (16.6m) main boom on theYB5518
Optional: YB5515: Manual 4th main boom sectionadds 11 ft. (3.4m) additional main boomlength
Standard: 2-wheel, 4-wheel and crab steer(YB5515)
Optional: 2-wheel, -4-wheel, and crab steer withelectronic self-alignment (std. onYB5518)
Standard: Open air cab shell w/overheadsafety glass
Optional: Closed cab with hinged door,heater, and defroster
Standard:• Cummins QSB 3.3L, Tier III, diesel rated
@ 99 bhp (73.8Kw) @ 2600 r.p.m.
• Single position obliquestyle outriggers(YB5515).
• -2-position beam / jackstyle outriggers(YB5518).
3
YB5500 S
eri
es
specifications
Superstructure
BoomYB5515: 18 ft. 6 in. – 41 ft. 0 in. (5.6m – 12.5m) three-section fullpower boom.Maximum tip height: 46 ft. 3 in. (14.1m)
YB5518: 18 ft. 6 in. – 54 ft. 6 in. (5.6m – 16.6m) four-section fullpower boom.Maximum tip height: 62 ft. 6 in. (19.0m)
*Optional BoomYB5515: Manual 4th main boom fly sectionMaximum tip height: 56 ft. 3 in. (17.0m)
*Boom Extension15 ft. (4.6m) offsettable swingaway extension
Boom NoseYB5515: 2 sheave non-pivoting boom nose
YB5518: Two sheave, -3-position (0˚, + 40˚, + 80˚) pivoting boomnose for minimizing head space requirements. Lowers headheight 15.9 in. (0.4m) when nose is pivoted fully forward.
Boom ElevationYB5515: Single double acting hydraulic cylinder with integralholding valve.
YB5518: Two double acting hydraulic cylinders with integralholding valve.
Elevation: 0 ˚ to 69˚ for the YB55150 ˚ to 80 ˚ for the YB5518
Anti-Two Block DeviceStandard anti-two block device, when activated, provides anaudible warning to the crane operator and disengages all cranefunctions whose movement can cause two-blocking.
Load Indicator (wireless LSI)A simple effective and easy to use load indicating system usedin conjunction with the anti-two block system to assist theoperator in efficient operation of the unit within the limits of theload chart. The display panel displays the hook load and warnsthe operator when a preset load capacity is exceeded. Thewarning is by a flashing light on the display panel. Inconjunction with the load display panel (receiver), there is awireless transmitter and load sensing pin attached to the boomhead that transmits the hook load to the display panel.
*Rated Capacity Limiter (wireless RCL)Similar to the Load Indicator, but stops the telescope out andboom lift down function when a load limit is exceeded. Uses asimilar display panel with the addition of displaying boom angleand boom length read outs on the panel.
*Load Moment Indicator (hardwired LMI)Digital display of boom angle, boom length, boom radius,capacity, and allows for operator input to set the limits based onload chart. Displays color coded light bar and audible alarmwith function cutout if load exceeds entered parameters.
Swing Ball bearing swing circle with 360° continuous rotation. Hydraulic driven worm gear and pinion.Maximum speed: YB5515: 2.1 rpm
YB5518: 2.5 rpm
Hydraulic System4 section gear pump providing a system pressure of 3500 psi(241.3 bars)
Combined flow: 88.0 gpm (333.1 Lpm)
YB5515: Six section valve bank mounted in dash with directmechanical linkage for low effort lever control.
YB5518: Six section valve bank chassis mounted; operated viadash mounted, pilot pressure hydraulic joysticks.
Return line filter with full flow by-pass protection and serviceindicator.
40 gallon (151.4 L) hydraulic reservoir with sight level gauge andsteel side plating to guard against side impact damage.
Hoist Specifications
Piston motor drive with spring applied / hyd. released brake.Equal speed power up and down.
Drum Diameter: 9.75 in. (0.25m)
Maximum hoist single line pull: 12,000 lb. (5 443kg)
Maximum hoist single line speed:YB5515: 126 FPM (38.4m / min)YB5518: 158 FPM (48.2m / min)
Maximum Permissible Single Line Pull:YB5515: 7,500 lb (3 402kg)(1/`2" [12.7mm] EEIPS)YB5518: 9,000 lb (4 082kg)(1/2" [12.7mm] Python Ultra)
Rope Length:YB5515: (3-section boom) 240 ft. (73.0m)(4-section boom) 290 ft. (88.4m)
YB5518: 310 ft. (94.5m)
*Denotes optional equipment
Boom
Boom
Extension
Boom Nose
Boom Elevation
Load Moment & Anti-Two Block System
Load Moment & Anti-Two Block System
Load Moment & Anti-Two Block System
Swing
Load Moment & Anti-Two Block System
Hydraulic System
Hoist
4
YB5500 S
eri
es
specifications
Carrier
FrameHigh strength alloy steel constructed with integral outriggerhousings; front and rear tie-down lugs. 75 ft.2 carrydeck sizewith 20,000 lb (9 072kg) carrying capacity. Deck coated withanti-skid treatment.
OutriggersYB5515: Front and rear oblique type beams at all four cornerswith integral holding valves. Outrigger pads form an integral partof the beam. Outrigger pad size 8.75" x 10" (222 mm x 254 mm).
YB5518: 2-stage hydraulic telescoping beam with oblique typejack on all four corners, provides extended and down andretracted and down lifting capacities. Integral holding valves onboth beam and jack. Outrigger pad size 8.75" x 10" (222 mm x254 mm).
Outrigger ControlsYB5515: Lever controls located on dash panel and operate thebeams in pairs from side to side. Level bubble located insideoperators compartment.
YB5518: Two switch operation mounted on dash panel. One 3-position rocker switch to select all beams / jacks, left beams /jacks only, or right beams / jacks only. Separate 4- way toggleswitch to activate beams out / in and jacks down / up. Levelbubble indicator located inside operators compartment.
*Independent outrigger controls available as an option.
Std. EngineCummins QSB 3.3L turbo-charged diesel rated @ 99 bhp(73.8kW) @ 2600 rpm.
*Optional EngineG.M. 4.3L V-6 EFI dual fuel (gasoline / L.P.) rated @ 101 bhp(75.3kW) @ 2500 rpm.
Operators Control StationFrame mounted, open air style control station with cab shellincludes all crane functions, driving controls, and overheadsafety glass. Other standard equipment include a durableweather resistant seat with seat belt, hourmeter, sight levelbubble, and fire extinguisher. The dash panel includes engine oilpressure gauge, engine water temperature gauge, fuel gauge,transmission low oil and high temperature warning lights, lowbattery warning light, and brake system low pressure warninglight. The LSI (load indicator) receiver is mounted to the top ofthe dash.
*Operators Control Station EnclosedIncludes the standard cab shell with the addition of front, right,and rear glass. Hinged full door with sliding glass.
Front windshield wiper, heater and defroster are included.
Fuel Tank Capacity40 gallon (151.4 L) all steel construction with steel side plate toguard against side impact.
Electrical SystemOne 12V maintenance free battery, 820CCA @ 0°. 63 amp alternator.
Drive4 x 2 – Front axle drive with planetary hubs and limited slipdifferential.
SteerYB5515: 2-wheel, 4-wheel, and crab steerYB5518: 2-wheel, -4-wheel, and crab steer w/electric selfalignment.
TransmissionYB5515: I.T.L. synchromesh 4-speeds forward and reverse.
YB5518: I.T.L. powershift 4-speeds forward and reverse. Stalkmounted shifter on left side of steering column.
Tires385/65R 22.5 radial traction tread pneumatic.
BrakesHydraulic actuated internal wet-disc service brakes acting on allfour wheels. A dash mounted toggle switch activates the drydisc parking brake on the transmission output yoke with a dashwarning light.
SuspensionFront: Rigid mounted to frame.Rear: Provides 1.5° oscillation for use on semi-rough terrain.Axle lock-out must be engaged (locked) whenever picking onrubber or traveling in the crab steer mode. A warning lightindicates when the axle lock-outs are engaged.
*Optional 4˚ oscillation.
LightsRecessed mounted, includes head, tail, rear work, stop, and turnsignals.
Maximum SpeedYB5515: 14.5 mph (23.3km/h)YB5518: 21.0 mph (33.8km/h)
Gradeability**YB5515: 73%....no load
41%....20,000lb (9 072kg) loadYB5518: 68%....no load
40%....20,000lb (9 072kg) load
G.V.W.YB5515: 26,300 lb (11 930kg) 3-section boom
26,750 lb (12 134kg) 4-section boomYB5518: 30,000 lb (13 608kg)
Miscellaneous Standard EquipmentTwo sheave, “Quick Reeve” style hookblock; YB5515: 15.0T(13.6mt); YB5518: 18.0T (16.3mt).Back-up alarmLifting and tie down lugs
*Denotes Optional Equipment**Theoretical
Frame
Outriggers
Outrigger Controls
Engine
Engine
Cab
Cab
Electrical System
Steering
Transmission
Drive
Tires
Brakes
Suspension
Lights
Speed
Grade
Fuel Tank Capacity
5
YB5500 S
eri
es
dimensions
15' 0.50"(4.58 m)
7' 1"(2.16 m)
6' 0"(1.83 m)
3' 6"(1.06 m)
2' 5"(0.74 m)
7' 11-1/2"(2.43 m)
4' 0"(1.22 m)
6' 7"(2.01 m)
13' 2-1/2''(4.06 m)
22' 1''(6.73 m)
1' 8"(50.8 cm)
14' 1'(4.29 m)
3 Section Boom18' 6'' Retracted
(5.65 m)41' 0" Extended
(12.50 m)
4' 4"(1.32 m)
7' 11-1/2"(2.43 m)
8"(2.03 mm)
3"(0.08 m)
8' 0" (w/ Enclosed Cab)(2.44 m)
12' 3"(3.73 m)
6' 2"(1.88 m)
6' 6-1/2"(1.99 m)
4' 1"(1.24 m)
1' 3"(38.1 cm)
1' 1"(33.0 cm)
4 Section Boom18' 6'' Retracted
(5.65 m)52' 3" Extended
(15.93 m)
YB5515 Dimensions
15' 0.50"(4.58 m)
7' 1"(2.16 m)
6' 0"(1.83 m)
3' 6"(1.06 m)
2' 5"(0.74 m)
7' 11-1/2"(2.43 m)
4' 0"(1.22 m)
6' 7"(2.01 m)
13' 2-1/2''(4.06 m)
22' 1''(6.73 m)
1' 8"(50.8 cm)
14' 1'(4.29 m)
3 Section Boom18' 6'' Retracted
(5.65 m)41' 0" Extended
(12.50 m)
4' 4"(1.32 m)
7' 11-1/2"(2.43 m)
8"(2.03 mm)
3"(0.08 m)
8' 0" (w/ Enclosed Cab)(2.44 m)
12' 3"(3.73 m)
6' 2"(1.88 m)
6' 6-1/2"(1.99 m)
4' 1"(1.24 m)
1' 3"(38.1 cm)
1' 1"(33.0 cm)
4 Section Boom18' 6'' Retracted
(5.65 m)52' 3" Extended
(15.93 m)
YB5515 Dimensions
YB5515
6
YB5500 S
eri
es
range diagram
3-SECTION BOOM YB5515B
OO
M A
ND
EX
TE
NS
ION
LE
NG
TH
IN
FE
ET
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
HE
IGH
T F
RO
M T
HE
GR
OU
ND
IN
FE
ET
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
7
YB5500 S
eri
es
52
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
62
64
66
68
70
72
128 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 660
46 4 2 0 2 6
46 4 2 0 2 1286 10 14 16 18 20 3822 24 26 28 3430 32 36 464240 44 48 50 52 54 56 58 60 62 64 66
52
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
44
36
38
40
42
48
46
50
60
56
54
58
62
64
66
68
70
72
0oo
10oo
20oo
30oo
40oo
50oo
60oo
6969oo
RETRACTEDW/4TH RET
RETRACTEDW/4TH EXT
EXTENDEDW/4TH RET
EXTENDEDW/4TH EXT
15'JIB
OPERA TING RADIUS IN FEET FROM AXIS OF ROT ATION
HE
IGH
T F
RO
M T
HE
GR
OU
ND
IN F
EE
T
YB5515 (4-SECTION BOOM)4-SECTION BOOMYB5515B
OO
M A
ND
EX
TE
NS
ION
LE
NG
TH
IN
FE
ET
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
HE
IGH
T F
RO
M T
HE
GR
OU
ND
IN
FE
ET
range diagram
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
8
YB5500 S
eri
es
0-30000 lbs
4-PART
0-7500 lbs
1-PART
RIGGING CHART
WIRE ROPE: 1/2 inch diameter
Min. breaking strength 26250 lbs.
REDUCTION CHART
MAIN BOOM
FROM
RATINGS
JIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
210 lbs
100 lbs
0 lbs
700 lbs
N/A
100 lbs
N/A
0 lbs
SHADED AREAS ARE GOVERNED BY STRUCTURAL
OPERATION OF THIS EQUIPMENT IN EXCESS OF
JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL
FRONT REAR
SIDE
SIDE
15°
30°
15°
30°
STRENGTH, DO NOT RELY ON TIPPING.
RATING CHARTS AND DISREGARD OF INSTRUCTIONS
IS DANGEROUS AND VOIDS WARRANTY.
CAPACITY CHART AND MAIN CAPACITY CHART.
1) The rated loads are the maximum
lifting capacities as determined by
operating radius only. Any
combination of boom lengths and
angles may be used to obtain
operating radius. The operating
radius is the horizontal distance
from a projection of the axis of
rotation to the supporting surface,
before loading, to the center of
vertical hoist line or tackle with
load applied.
2) The rated loads shown on
outriggers do not exceed 85% of
actual tipping. The rated loads
shown on rubber do not exceed
75% of actual tipping. These ratings
are based on freely suspended
loads with the crane leveled,
standing on a firm, uniform
supporting surface. Practical
working loads depend on
supporting surface, operating radius
and other factors affecting stability.
Hazardous suroundings, climatic
conditions, experience of operator
and proper training must be taken
into account by the operator.
3) The weights of all load handling
devices, such as hooks, hook
blocks, slings, etc., except the hoist
rope, shall be considered as part
of the load. See reduction chart.
4) Ratings on outriggers are with
outriggers fully extended.
5) Ratings on rubber depend on tire
capacity, condition of tires and
proper inflation pressure (120 psi).
Loads on rubber may be
transported at a maximum speed
of 2.5 mph on a smooth, hard, level
surface with the boom retracted to
the shortest length possible and
centered over the front.
6) For operating radius not shown, use
load rating of next larger radius.
7) The maximum combined total
boom and deck load is 16000 lbs.
The maximum deck load only is
20000 lbs.
8) Do not induce any external side
loads to boom or jib.
YB5515 (3-SECTION BOOM)
ON OUTRIGGERS (lbs)
MA
IN B
OO
MJ
IB
ON RUBBER (lbs)
14800
RADIUS
(ft)
13000
12200
10800
9630
8640
14800
13000
12200
10800
9180
4290
3260
3060
3580
3920
5310
4740
6210
7480
3480
3310
2960
2710
2410
2210
2700
2560
2860
5060
4020
4510
7040
6420
5700
7790
3700
7210
6600
6000
5250
640
570
740
690
3190
1320
930
860
800
1160
1040
1820
1530
2200
2660
4760
3900
1040
930
1190
1120
4370
1990
1460
1270
1370
1790
1610
2620
2260
3070
3710
6060
5120
3130
F/R 360° F/R 360°
30000
26200
22300
18600
30000
26200
22300
18600
17000
13500
17000
14600
10880
8100
10700
8710
14.0
15.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
32.0
34.0
36.0
37.5
40.0
42.0
44.0
46.0
48.8
6.0
8.0
10.0
12.0
2390 1940 48079052.5
BOOM
(deg)ANGLE
MAIN
60
40
15
0
3035
4550
2250
1950
-
21502080
3150
26002400
JIB STRUCTURAL
55 2850
25 205020 2000
5 -10 -
69 390065 3500
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
60005000
1950
-
-
19001850
2350
21002000
2200
--
--
28002550
15°0° 30°
CAPACITIES (lbs)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5515 w/3-section boom
load chart
9
YB5500 S
eri
es
ON RUBBER (lbs)ON OUTRIGGERS (lbs)
MA
IN B
OO
MJI
B
1480014.0
RADIUS(ft)
15.0 1300016.0 1220018.0 1080020.0 963022.0 864024.026.028.030.032.034.036.037.540.042.044.046.048.8
58.052.5
148001300012200106008630
4420
31902890
35703950
57005040
64607350
29502760
243022402030
- -
209018501480
24302250
2600
4400
35103930
680058205020
7790
3210
72106600
54804890
-
450380290
550500
3080
1220
770680610
1070920
16101410
19902460
45003750
-
800680500
970890
3980
1880
1280
10701180
16501460
23602100
27203230
60604950
2590
F/R 360o F/R 360o
63.8 - - --
ON RUBBER (lbs)ON OUTRIGGERS (lbs)
8290
RADIUS(ft)
82008110795078207710
83908200811079507820
4760
31902970
35704080
63305420
72707710
34003150
2630232020701720 1380
213019301710
24902300
2700
5180
42504680
710065905710
7630
3830
77607150
75006080
170
470370280
630540
3560
1580
990880740
13601160
21501840
25203000
55104500
420
790710590
960870
4730
2190
1370
10701240
18801600
29402550
34103980
66105680
2890
F/R 360o F/R 360o
1330 1020 60230
4TH EXTENDED
300006.08.0 26200
10.0 2230012.0 18600
30000262002230018600
1700013500
1700014600110007650
107008710
-11000107009250
-11000107009250
-11000
-11000107009250
107009250
14.015.016.018.020.022.024.026.028.030.032.034.036.037.540.042.044.046.048.8
58.052.5
63.8
6.08.0
10.012.0
4TH RETRACTED
BOOM
(deg)ANGLE
MAIN
4TH RETRACTED
60
40
15
0
3035
4550
2250
1950
-
21502080
3150
26002400
JIB STRUCTURAL CAPACITIES (lbs)
55 2850
25 205020 2000
5 -10 -
69 390065 3500
4TH EXTENDED
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
60005000
1950
-
-
19001850
2350
21002000
2200
--
--
28002550
15o0o 30o 0o 15o 30o
2250
1950
-
21502080
3150
26002400
2850
20502000
--
39003500
2800
2100
2000
26002400
4300
34003050
3800
23002200
20202050
51804970
1950
-
-
19001850
2350
21002000
2200
--
--
28002550
0-30000 lbs4-PART
0-7500 lbs1-PART
RIGGING CHART
WIRE ROPE: 1/2 inch diameter
Min. breaking strength 26250 lbs.
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
210 lbs
100 lbs
0 lbs
700 lbs
N/A
100 lbs
N/A
0 lbs
SHADED AREAS ARE GOVERNED BY STRUCTURAL
OPERATION OF THIS EQUIPMENT IN EXCESS OF
JIB CAP ACITY IS LIMITED BY BOTH STRUCTURAL
FRONT REAR
SIDE
SIDE
15o
30o
15o
30o
STRENGTH, DO NOT RELY ON TIPPING.
RATING CHARTS AND DISREGARD OF INSTRUCTIONSIS DANGEROUS AND VOIDS WARRANTY .
CAPACITY CHART AND MAIN CAPACITY CHART.1) The rated loads are the maximum
lifting capacities as determined by
operating radius only. Any
combination of boom lengths and
angles may be used to obtain
operating radius. The operating
radius is the horizontal distance
from a projection of the axis of
rotation to the supporting surface,
before loading, to the center of
vertical hoist line or tackle with
load applied.
2) The rated loads shown on
outriggers do not exceed 85% of
actual tipping. The rated loads
shown on rubber do not exceed
75% of actual tipping. These ratings
are based on freely suspended
loads with the crane leveled,
standing on a firm, uniform
supporting surface. Practical
working loads depend on
supporting surface, operating radius
and other factors affecting stability.
Hazardous suroundings, climatic
conditions, experience of operator
and proper training must be taken
into account by the operator.
3) The weights of all load handling
devices, such as hooks, hook
blocks, slings, etc., except the hoist
rope, shall be considered as part
of the load. See reduction chart.
4) Ratings on outriggers are with
outriggers fully extended.
5) Ratings on rubber depend on tire
capacity, condition of tires and
proper inflation pressure (120 psi).
Loads on rubber may be
transported at a maximum speed
of 2.5 mph on a smooth, hard, level
surface with the boom retracted to
the shortest length possible and
centered over the front.
6) For operating radius not shown, use
load rating of next larger radius.
7) The maximum combined total
boom and deck load is 16000 lbs.
The maximum deck load only is
20000 lbs.
8) Do not induce any external side
loads to boom or jib.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5515 w/ 4-section boom
load chart
dimensions
10
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
7' 11"(2.41 m)
6' 2.25"(1.89 m)
3' 10"(1.17 m)
14.25"(0.36 m)
6' 6"(1.98 m)
7' 9.5"(2.38 m)
13' 10"(4.22 m )
4' .75"(1.24 m)
2' 5.5"(0.75 m)
3' 10.75 "(1.17 m)
6' 8"(2.03 m)
1' 4.5"(0.42 m)
3' 6"1.07 m)
15' 8"(4.78 m)
SEEINSET
1' 8"(0.51 m)
3' 11"(1.19 m)7' 11.25"
(2.42 m)6' 6.75"(2.00 m)
7' 1.25"(2.17 m)
14' 1.25"(4.30 m)
22' 8"(6.91 m)
13.25"(0.34 m)
Retracted 18' 6" (5.64 m) & Extended 54' 6" (16.61 m)
6' 0"(1.83 m)
7' 0"(2.13 m)
(1.68 m)65.97"
0o
(1.61 m)63.39"
40o
(1.27 m)50.00"
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
7' 11"(2.41 m)
6' 2.25"(1.89 m)
3' 10"(1.17 m)
14.25"(0.36 m)
6' 6"(1.98 m)
7' 9.5"(2.38 m)
13' 10"(4.22 m )
4' .75"(1.24 m)
2' 5.5"(0.75 m)
3' 10.75 "(1.17 m)
6' 8"(2.03 m)
1' 4.5"(0.42 m)
3' 6"1.07 m)
15' 8"(4.78 m)
SEEINSET
1' 8"(0.51 m)
3' 11"(1.19 m)7' 11.25"
(2.42 m)6' 6.75"(2.00 m)
7' 1.25"(2.17 m)
14' 1.25"(4.30 m)
22' 8"(6.91 m)
13.25"(0.34 m)
Retracted 18' 6" (5.64 m) & Extended 54' 6" (16.61 m)
6' 0"(1.83 m)
7' 0"(2.13 m)
(1.68 m)65.97"
0o
(1.61 m)63.39"
40o
(1.27 m)50.00"
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
7' 11"(2.41 m)
6' 2.25"(1.89 m)
3' 10"(1.17 m)
14.25"(0.36 m)
6' 6"(1.98 m)
7' 9.5"(2.38 m)
13' 10"(4.22 m )
4' .75"(1.24 m)
2' 5.5"(0.75 m)
3' 10.75 "(1.17 m)
6' 8"(2.03 m)
1' 4.5"(0.42 m)
3' 6"1.07 m)
15' 8"(4.78 m)
SEEINSET
1' 8"(0.51 m)
3' 11"(1.19 m)7' 11.25"
(2.42 m)6' 6.75"(2.00 m)
7' 1.25"(2.17 m)
14' 1.25"(4.30 m)
22' 8"(6.91 m)
13.25"(0.34 m)
Retracted 18' 6" (5.64 m) & Extended 54' 6" (16.61 m)
6' 0"(1.83 m)
7' 0"(2.13 m)
(1.68 m)65.97"
0o
(1.61 m)63.39"
40o
(1.27 m)50.00"
80o
YB5518 Dimensions
Dimensions are with the boom horizontaland the anti-two block bottomed.
YB5518
11
YB5500 S
eri
es8
0o
75o80o
MO
OB
TF 5.81
MO
OB
TF 5.03
MO
OB
TF 5.24
MO
OB
TF 5.45
686 4 2 0 2 4 6 8 10 66646260585654525048464442403836343230282624222018161412
784008 6 4 2 20102 4 6 8 12 14 16 18 3022 24 2826 32 34 3836 605042 44 4846 52 54 5856 62 64 6866
76
74
72
70
68
66
64
62
60
58
56
54
52
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
14
0
2
4
6
8
10
12
16
18
20
22
24
26
30
28
32
34
36
38
46
40
42
44
48
50
52
54
56
58
62
60
64
78
66
68
70
72
74
76
70o
65o
60o
55o
50o
45o
40o
35o
30o
25o
20o
15o
10o
5o
YB5518 Range Diagram
69.5
FT
WIT
H 1
5 F
T J
IB
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5518
range diagramB
OO
M A
ND
EX
TE
NS
ION
LE
NG
TH
IN
FE
ET
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
HE
IGH
T F
RO
M T
HE
GR
OU
ND
IN
FE
ET
12
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
40
Any Boom Length
8 6
10
14
16182022
26
28303234
38
(ft)
36
24
12
Radius Rating(lbs)
10900
360o
4039.0383634
2426
27.02830
(ft)
1415.0161820
10 8 6
Radius(lbs)(deg)
18.5 ft BOOMRatedLoad
BoomAngle
30.5 ft BOOM
MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360o or Retracted and Down Front/Rear
RatedLoad(lbs)
BoomAngle(deg)
42.5 ft BOOMBoomAngle(deg)
RatedLoad(lbs)
54.5 ft BOOMRatedLoad(lbs)(deg)
AngleBoom
Retracted and Down 360oMAIN BOOM LOAD RATINGS ON OUTRIGGERS
42.5 ft BOOM
(deg)AngleBoom
Radius(ft) (deg) (lbs)(lbs)(deg)
18.5 ft BOOM
AngleBoom Rated
Load
30.5 ft BOOM
AngleBoom
LoadRated
(deg) (lbs)(lbs)
54.5 ft BOOMBoomAngleLoad
RatedLoadRated
16000
(lbs)RatingFront
MAIN BOOMON RUBBER
42
4648
44
51.0
12
22
32
64 36000 75 24500 2370079 --
51.0
39.0383634323028
4846444240
27.0
15.0
22
2624
12
201816
14
6
10 8
48464442
57 31500 71 24500 77 8023000 1740049 24000 67 24000 74 7721500 1580039 19500 63 20000 71 7519700 1400025 16200 58 16800 68 7317000 126000 15000 56 15500 66 7215800 12000- - 53 14400 65 7114600 11400- - 48 12500 62 6912700 10500- - 43 11000 59 6611200 9600- - 37 9800 55 6410000 8900- - 29 8700 52 619000 8300- - 18 7800 48 598100 7700- - 0 7400 46 587700 7500- - - - 44 567300 7200- - - - 40 546500 6700- - - - 36 515700 6000- - - - 30 485100 5400- - - - 24 454500 4800- - - - 15 424000 4300- - - - 0 413900 4000- - - - - 39- 3800- - - - - 35- 3400- - - - - 31- 3100- - - - - 27- 2900- - - - - 21- 2700- - - - - 0- 2400
--
--
--
--
------
------
-----
-----
15
------
---
0-
-----
36
2430
4044
7467
48
-----
29180
3743
--
80008900
1140016000
53565863
62
34003600410050005900
52
4648
5559
6800810089009900
1290022000
65666871
2900036000
71 2450024500
77
27
021
--
700900
42
31353941
----
1700
110013001400160017001800
4548515456
18002000220025002900
20002200250028003300
77
69
5859616466
33003600380045005200
36003900450053006100
71727375
62007200
9300102001280020000
720085009500
106001300015800
80-
2300023700
17400-75 79
-------------
49
-----
0
--
2539
5764
8500
13000 870011000 74009100 64007800 5600
6500 49005600 42004800 35004200 30003600 25003150 2200
2800 19002450 16502100 14001900 12001750 10001525 850
1350 7251150 6251050 525
425300200
95085070051.0
39.0 1450 775
27.0 2950 2050
15.0 7100 5300
HANDLING DEVICES INSTALLED (lbs)
HOOK & BALL
MAIN BLOCK
FROM MAIN BOOM FROM JIB
RATING REDUCTIONS FOR LOAD
JIB ST OWED
JIB DEPLOYED
230
100
NO REDUCTION
700
NOT APPLICABLE
100
NOT APPLICABLE
NO REDUCTION
15o
30o
SIDE
FRONT REAR
15o
30o
SIDE
1/2 inch dia. 10 x 19 EIPS IWRC BRIGHTMin. req'd breaking strength = 31,500 lbs
WIRE ROPE:
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 9000 lbs
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OF INSTRUCTIONS
IS DANGEROUS AND VOIDS WARRANTY.
15 FT JIB CAPACITIES ON EXTENDED OUTRIGGERSJib Offset Angle
20501050 2000
2020
35
2015
3025
504540
6055
2600
2100220023002400
28003050340038004300
MainBoom
757065
80
0 deg
5000
-
---
-
-
-
--
19001830
2100
19502000
22002350
2150
20001950
-
20802050
260024002250
31502850
30 deg
3100
25502800
3500440039003500
15 deg
5000
2600
1600
14501440
14601500
1750193021502400
3800
29003300
460061007500
-
To 42.5 ft To 54.5 ftAngleMain Main(deg) Boom
Any
--
Boom Boom Length
5000
35003900
28503150
4400
22502400
172018502050
15201590
2600
--
-
MainBoom
To 54.5 ftMainBoom
To 42.5 ftbe transported at a maximum speed of 2.5 mp h on a smooth
Do not induce any external side loads to boom or jib.
The maximum combined total boom and deck load is 16,000
For operating radius not shown, use load rating of next larger
possible and centered over front. Do not use jib with cranehard level surface with boom retacted to the shortest length
lbs. The maximum deck load only is 20,000 lbs.
radius.
on rubber .
7)
8)
6)
hook blocks, slings, etc., except the hoist rope, shall be The weights of all load handling devices, such as hooks,
and proper inflation pressure (120 psi). Loads on rubber mayRatings on rubber depend on tire capacity, co ndition of tires
fully retracted and down will apply for any intermediateand down or fully retracted and down. Ratings for outriggersRatings on outriggers are for either outriggers fully extended
of personnel and proper handling must all be taken intostability. Hazardous surroundings, climatic conditions, experiencesupporting surface, operating radius and other factors affectinguniform supporting surface. Practical working l oads depend onsuspended loads with the crane leveled, standing on a firm,75% of actual tipping. These ratings are based on freelyactual tipping. The rated loads shown on rubber do not exceedThe rated loads shown on outriggers do not exceed 85% of
to the center of vertical hoist line or tackle with load applied.the axis of rotation to the supporting surface, before load ing,operating radius is the horizontal distance from a projection ofby operating radius, boom length and boom angle. TheThe rated loads are the maximum lift capacitie s as determined
2)
considered as part of the load. See above.
account by the operator .
3)
outrigger setting.
5)
4)
1)
load chart
YB5518
13
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5515 (w/3-section boom)
range diagram
69o
60o
50o
40o
30o
20o
10o
0o
16.515.815.214.613.412.2 12.8 14.011.09.89.1 10.48.57.97.36.7 11.66.15.54.94.33.01.8 2.4 3.70.600.61.21.8 1.2
18.9
17.7
16.5
17.1
18.3
15.2
14.0
14.6
12.8
12.2
11.6
11.0
13.4
10.4
9.8
9.1
8.5
7.9
7.3
6.7
6.1
5.5
4.9
4.3
3.7
3.0
2.4
1.8
1.2
0.6
0
15.8
16.515.815.214.613.412.2 12.8 14.011.09.89.1 10.48.57.97.36.7 11.66.15.54.94.33.01.8 2.4 3.70.600.61.21.8 1.2
18.9
17.7
16.5
17.1
18.3
15.2
14.0
14.6
12.8
12.2
11.6
11.0
13.4
10.4
9.8
9.1
8.5
7.9
7.3
6.7
6.1
5.5
4.9
4.3
3.7
3.0
2.4
1.8
1.2
0.6
0
15.8
OPERATING RADIUS IN METERS FROM AXIS OF ROTATION
BO
OM
AN
D E
XT
EN
SIO
N L
EN
GT
H I
N M
ET
ER
S
14
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5515 (w/4-section boom)
15.8
0.6
1.2
1.8
2.4
3.0
3.7
4.3
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
9.8
10.4
13.4
11.0
11.6
12.2
12.8
14.6
14.0
15.2
18.3
17.1
16.5
17.7
18.9
19.5
20.1
20.7
21.91.21.8 1.2 0.6 0 0.6 3.72.41.8 3.0 4.3 4.9 5.5 6.1 11.66.7 7.3 7.9 8.5 10.49.1 9.8 11.0 14.012.812.2 13.4 14.6 15.2 15.8 16.5 17.1 17.7 18.3 18.9 19.5 20.1
1.21.8 1.2 0.6 0 0.6 3.72.41.8 3.0 4.3 4.9 5.5 6.1 11.66.7 7.3 7.9 8.5 10.49.1 9.8 11.0 14.012.812.2 13.4 14.6 15.2 15.8 16.5 17.1 17.7 18.3 18.9 19.5 20.1
0o
10o
20o
30o
40o
50o
60o
69o
RETRACTED RETRACTED EXTENDED EXTENDED 4.6 m
15.8
0.6
1.2
1.8
2.4
3.0
3.7
4.3
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
9.8
10.4
13.4
11.0
11.6
12.2
12.8
14.6
14.0
15.2
18.3
17.1
16.5
17.7
18.9
19.5
20.1
20.7
21.3
21.9
21.3
OPERATING RADIUS IN METERS FROM AXIS OF ROTATION
BO
OM
AN
D E
XT
EN
SIO
N L
EN
GT
H I
N M
ET
ER
S
range diagram
DIN/ISOload chart
15
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
1) The rated loads are the maximumlifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtainoperating radius. The operating radius is the horizontal distance from a projection of the axis ofrotation to the supporting surface,before loading, to the center ofvertical hoist line or tackle withload applied.
2) The rated loads shown on outriggers do not exceed 80% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniformsupporting surface. Practicalworking loads depend on supporting surface, operating radiusand other factors affecting stability.Hazardous suroundings, climatic conditions, experience of operatorand proper training must be takeninto account by the operator.
3) The weights of all load handlingdevices, such as hooks, hookblocks, slings, etc., except the hoistrope, shall be considered as partof the load. See reduction chart.
4) Ratings on outriggers are withoutriggers fully extended.
5) Ratings on rubber depend on tirecapacity, condition of tires andproper inflation pressure (8.3 bar).Loads on rubber may be transported at a maximum speedof 1.4 km/h on a smooth, hard, levelsurface with the boom retracted tothe shortest length possible and centered over the front.
6) For operating radius not shown, useload rating of next larger radius.
7) The maximum combined totalboom and deck load is 7 260 kgs.The maximum deck load only is 9 070 kgs.
8) Do not induce any external sideloads to boom or jib.
0-13610 kg4-PART
0-3400 kg1-PART
RIGGING CHART
WIRE ROPE: 13 mm diameter
Min. breaking strength 128.4 kN.
REDUCTION CHART
MA
IN B
OO
MJI
B
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
100 kg
50 kg
0 kg
320 kg
N/A
50 kg
N/A
0 kg
ON RUBBER (kg)ON OUTRIGGERS (kg)
6710
RADIUS(m)
5900
5540
4900
4370
3920
6710
5900
5530
4750
3840
1750
1310
1230
1450
1600
2190
1950
2570
3120
1410
1330
1190
1080
950
870
1080
1010
1140
2080
1640
1850
3010
2660
2350
3460
1500
3270
2990
2650
2310
220
190
260
240
1370
530
350
320
290
450
400
750
620
920
1130
2090
1700
400
350
470
430
1940
830
590
500
550
740
660
1110
950
1320
1610
2750
2320
1260
F/R 360o F/R 360oBOOM
(deg)ANGLE
MAIN
60
40
15
0
30
35
45
50
1020
880
-
980
940
1430
1180
1090
JIB STRUCTURAL
55 1290
25 930
20 910
5 -
10 -
SHADED AREAS ARE GOVERNED BY STRUCTURAL
OPERATION OF THIS EQUIPMENT IN EXCESS OF
JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL
13610
11880
10120
8440
13610
11880
10120
8440
7710
6120
7710
6620
4860
3600
4850
3950
69 1770
65 1590
4.3
4.6
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
9.8
10.4
11.0
11.4
12.2
12.8
13.4
14.0
14.9
1.8
2.4
3.0
3.7
1270
950
910
1180
1090
1950
1540
1380
1720
1040
1000
920
930
2720
2270
880
-
-
860
840
1070
950
910
1000
-
-
-
-
1270
1160
15o0o 30o
CAPACITIES (kg)
940 750 14028016.0
FRONT REAR
SIDE
SIDE
15o
30o
15o
30o
STRENGTH, DO NOT RELY ON TIPPING.
RATING CHARTS AND DISREGARD OF INSTRUCTIONSIS DANGEROUS AND VOIDS WARRANTY.
CAPACITY CHART AND MAIN CAPACITY CHART.
before
YB5515 (w/3-section boom)
16
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
DIN/ISOload chart
1) The rated loads are the maximumlifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtainoperating radius. The operating radius is the horizontal distance from a projection of the axis ofrotation to the supporting surface,before loading, to the center ofvertical hoist line or tackle withload applied.
2) The rated loads shown on outriggers do not exceed 80% ofactual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniformsupporting surface. Practicalworking loads depend on supporting surface, operating radiusand other factors affecting stability.Hazardous suroundings, climatic conditions, experience of operatorand proper training must be takeninto account by the operator.
3) The weights of all load handlingdevices, such as hooks, hookblocks, slings, etc., except the hoistrope, shall be considered as partof the load. See reduction chart.
4) Ratings on outriggers are withoutriggers fully extended.
5) Ratings on rubber depend on tirecapacity, condition of tires andproper inflation pressure (8.3 bar).Loads on rubber may be transported at a maximum speedof 1.4 km/h on a smooth, hard, levelsurface with the boom retracted tothe shortest length possible and centered over the front.
6) For operating radius not shown, useload rating of next larger radius.
7) The maximum combined totalboom and deck load is 7 260 kgs. The maximum deck load only is 9 070 kgs.
8) Do not induce any external sideloads to boom or jib.
ON RUBBER (kg)ON OUTRIGGERS (kg)
MA
IN B
OO
MJI
B
6710
RADIUS(m)
5900
5540
4900
4370
3920
17.7
6710
5900
5540
4450
3600
1800
1270
1150
1440
1600
2340
2060
2670
3050
1170
1090
950
870
780
- -
810
700
550
950
880
1020
1790
1410
1590
2820
2400
2050
3320
1290
3270
2990
2400
2140
-
120
90
50
170
150
1310
470
270
230
190
400
340
650
560
820
1030
1960
1620
-
280
230
150
360
320
1720
770
500
400
450
670
580
990
870
1150
1380
2670
2160
1020
F/R 360o F/R 360o
19.4 - - --
ON RUBBER (kg)ON OUTRIGGERS (kg)
3760
RADIUS(m)
3720
3680
3610
3550
3500
3760
3720
3680
3610
3550
1950
1270
1180
1440
1660
2620
2230
3020
3500
1360
1260
1040
900
800
650 500
820
740
640
970
890
1070
2120
1690
1910
3180
2730
2350
3460
1550
3520
3240
3320
2670
0
130
90
50
200
160
1530
630
370
320
250
530
450
890
750
1060
1280
2420
1960
110
280
240
190
350
310
2060
910
540
400
480
770
640
1250
1080
1470
1720
3000
2530
1150
F/R 360o F/R 360o
480 350 020
4TH EXTENDED
BOOM
(deg)ANGLE
MAIN
4TH RETRACTED
60
40
15
0
30
35
45
50
JIB STRUCTURAL CAPACITIES (kg)
55
25
20
5
10
SHADED AREAS ARE GOVERNED BY STRUCTURAL
OPERATION OF THIS EQUIPMENT IN EXCESS OF
JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL
13610
11880
10120
8440
13610
11880
10120
8440
7710
6120
7710
6120
4890
3390
4860
3950
-
5030
4850
4200
-
5030
4850
4200
-
5030
-
5030
4850
4200
4850
4200
69
65
4TH RETRACTED
4TH EXTENDED
15o0o 30o 0o 15o 30o
1020
880
-
980
940
1430
1180
1090
1290
930
910
-
-
1770
1590
1270
950
910
1180
1090
1950
1540
1380
1720
1040
1000
920
930
2350
2250
880
-
-
860
840
1070
950
910
1000
-
-
-
-
1270
1160
4.3
4.6
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
9.8
10.4
11.0
11.4
12.2
12.8
13.4
14.0
14.9
1.8
2.4
3.0
3.7
16.0
17.7
19.4
4.3
4.6
4.9
5.5
6.1
6.7
7.3
7.9
8.5
9.1
9.8
10.4
11.0
11.4
12.2
12.8
13.4
14.0
14.9
1.8
2.4
3.0
3.7
16.0
1020
880
-
980
940
1430
1180
1090
1290
930
910
-
-
1770
1590
1270
950
910
1180
1090
1950
1540
1380
1720
1040
1000
920
930
2720
2270
880
-
-
860
840
1070
950
910
1000
-
-
-
-
1270
1160
0-13610 kg4-PART
0-3400 kg1-PART
RIGGING CHART
WIRE ROPE: 13 mm diameter
Min. breaking strength 128.4 kN.
REDUCTION CHART
MAIN BOOMFROM
RATINGSJIB
FROM
RATINGS
MAIN BLOCK
HOOK & BALL
JIB, STOWED
JIB, DEPLOYED
100 kg
50 kg
0 kg
320 kg
N/A
50 kg
N/A
0 kg
FRONT REAR
SIDE
SIDE
15o
30o
15o
30o
STRENGTH, DO NOT RELY ON TIPPING.
RATING CHARTS AND DISREGARD OF INSTRUCTIONSIS DANGEROUS AND VOIDS WARRANTY.
CAPACITY CHART AND MAIN CAPACITY CHART.
YB5515 (w/4-section boom)
17
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
YB5518
range diagram
0
1
2
3
8
4
5
7
6
9
10
11
12
2 1 0 1 2 3 4 5 6 7 8 9 10
0o
5o
5.6
m B
OO
M
9.3
m B
OO
M
80o
70o75o
65o
60o
25o
35o
30o
15o
10o
20o
55o
45o
50o
40o
13
14
15
16
19
17
18
20
21
22
23
24
21. 2
m W
I TH
4. 6
m J
I B
16. 6
m B
OO
M
13. 0
m B
OO
M
2 1 0 1 2 3 4 5 6 7 8 9 10
1411 12 13 15 16 17 1918 20
0
1
2
3
8
4
5
7
6
9
10
11
12
13
14
15
16
19
17
18
20
21
1411 12 13 15 16 17 1918 20
22
23
21
21
24
OPERATING RADIUS IN METERS FROM AXIS OF ROTATION
BO
OM
AN
D E
XT
EN
SIO
N L
EN
GT
H I
N M
ET
ER
S
18
YB5500 S
eri
es
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions andother instructional plates must be read and understood prior to operating the crane.
DIN/ISOload chart
13 mm dia. 10 x 19 EIPS IWRC BRIGHTMin. req'd breaking strength = 15 710 kgs
WIRE ROPE:
MAXIMUM PERMISSIBLE SINGLE LINE PULL = 4 080 kgs
SHADED AREAS ARE GOVERNED BY STRUCTURALSTRENGTH, DO NOT RELY ON TIPPING.
OPERATION OF THIS EQUIPMENT IN EXCESS OFRATING CHARTS AND DISREGARD OF INSTRUCTIONS
IS DANGEROUS AND VOIDS WARRANTY.
12.2
Any Boom Length
2.41.8
3.0
4.34.95.56.16.7
7.98.59.19.8
10.4
11.6
(m)
11.0
7.3
3.7
Radius Rating(kgs)
4950
360o
12.211.911.611.010.4
7.37.98.28.59.1
(m)
4.34.64.95.56.1
3.02.41.8
Radius(kgs)(deg)
5.6 m BOOM
RatedLoad
BoomAngle
9.3 m BOOM
MAIN BOOM LOAD RATINGS ON OUTRIGGERSExtended and Down 360o or Retracted and Down Front/Rear
RatedLoad(kgs)
BoomAngle(deg)
13.0 m BOOM
BoomAngle(deg)
RatedLoad(kgs)
16.6 m BOOM
RatedLoad(kgs)(deg)
AngleBoom
Retracted and Down 360oMAIN BOOM LOAD RATINGS ON OUTRIGGERS
13.0 m BOOM
(deg)AngleBoom
Radius(m) (deg) (kgs)(kgs)(deg)
5.6 m BOOM
AngleBoom Rated
Load
9.3 m BOOM
AngleBoom
LoadRated
(deg) (kgs)(kgs)
16.6 m BOOM
BoomAngleLoad
RatedLoadRated
7260
(kgs)RatingFront
MAIN BOOMON RUBBER
Note: For 360∞ ratingon rubber, rear axle
locks must be in place.
4.6 m JIB CAPACITIES ON EXTENDED OUTRIGGERS (kgs)Jib Offset Angle
8401050 825
830
35
2015
3025
504540
6055
1180
870930
10101090
12701380154017301950
MainBoom
757065
80
0 deg
2270
-
---
-
-
-
--
700630
930
780850
10001070
980
910890
-
940930
118010901020
14301290
30 deg
1410
11601270
1590200017701590
15 deg
2270
HANDLING DEVICES INSTALLED (kgs)
HOOK & BALLMAIN BLOCK
FROM MAIN BOOM FROM JIB
RATING REDUCTIONS FOR LOAD
JIB STOWEDJIB DEPLOYED
9543
NO REDUCTION318
NOT APPLICABLE43
NOT APPLICABLENO REDUCTION
12.8
14.014.6
13.4
15.5
3.7
6.7
9.8
64 16330 75 10560 823079 --
15.5
11.911.611.010.4
9.89.18.5
14.614.013.412.812.2
8.2
4.6
6.7
7.97.3
3.7
6.15.54.9
4.3
1.8
3.02.4
14.615.5
14.013.412.8
1020
565
530530
535550
610680760870
1730
12251460
209027703450
-
To 13.0 m To 16.6 mAngleMain Main(deg) Boom
Any
--
Boom Boom Length
2270
15901770
12601420
2000
800940
570625700
520535
1100
--
-
MainBoom
To 16.6 mMainBoom
To 13.0 m
be transported at a maximum speed of 1.4 km/h on a smooth
Do not induce any external side loads to boom or jib.
The maximum combined total boom and deck load is 7 264
For operating radius not shown, use load rating of next larger
possible and centered over front. Do not use jib with cranehard level surface with boom retacted to the shortest length
kgs. The maximum deck load only is 9 080 kgs.
radius.
on rubber.
7)
8)
6)
hook blocks, slings, etc., except the hoist rope, shall be The weights of all load handling devices, such as hooks,
and proper inflation pressure (8.3 bar). Loads on rubber mayRatings on rubber depend on tire capacity, condition of tires
fully retracted and down will apply for any intermediateand down or fully retracted and down. Ratings for outriggersRatings on outriggers are for either outriggers fully extended
of personnel and proper handling must all be taken intostability. Hazardous surroundings, climatic conditions, experiencesupporting surface, operating radius and other factors affectinguniform supporting surface. Practical working loads depend onsuspended loads with the crane leveled, standing on a firm,75% of actual tipping. These ratings are based on freelyactual tipping. The rated loads shown on rubber do not exceedThe rated loads shown on outriggers do not exceed 80% of
to the center of vertical hoist line or tackle with load applied.the axis of rotation to the supporting surface, before loading,operating radius is the horizontal distance from a projection ofby operating radius, boom length and boom angle. TheThe rated loads are the maximum lift capacities as determined
2)
considered as part of the load. See above.
account by the operator.3)
outrigger setting.
5)
4)
1)
57 14290 71 10430 76 808000 586048 10900 67 10000 74 777110 580038 8850 63 8880 71 756280 553025 7120 58 7260 68 735610 49200 6390 56 6640 66 725330 4660- - 53 6100 65 715070 4420- - 48 5220 62 684620 4020- - 43 4530 59 664240 3670- - 36 3980 55 643920 3380- - 29 3530 52 613570 3130- - 18 3160 48 593260 2910- - 0 3040 46 583100 2820- - - - 44 562960 2750- - - - 40 542625 2580- - - - 36 512335 2390- - - - 30 482050 2170- - - - 24 451810 1930- - - - 15 421630 1725- - - - 0 401550 1630- - - - - 39- 1540- - - - - 35- 1390- - - - - 31- 1270- - - - - 26- 1150- - - - - 21- 1045- - - - - 0- 930
--
--
--
--
------
------
-----
-----
15
------
---
0-
-----
36
2430
4044
7467
48
-----
29180
3643
--
3260370050506890
53565863
62
13101390161018902240
52
4648
5559
270032103530391048606250
65666871
976016330
71 845010560
76
26
021
--
170250
42
31353940
----
610
320390470560600650
4548515456
640730830930
1050
720810920
10601210
77
68
5859616466
12201320142016301890
12901380158018102100
71727375
22002590
3320366044805630
244028703140342041805130
80-
75008230
5850-75 79
-------------
48
-----
0
--
2538
5764
3070
5680 39504500 33603620 28803040 23902570 20002190 16901890 14301640 12101420 10301220 8701090 740950 630840 525720 430610 340520 270470 215400 165340 120
80450
280230150
15∞
30∞
SIDE
FRONT REAR
15∞
30∞
SIDE
YB5518
19
YB5500 S
eri
es
notes
Constant improvement and engineering progressmake it necessary that we reserve the right to makespecification, equipment and price changes withoutnotice. Illustrations shown may include optionalequipment and accessories, and may not include allstandard equipment.
©2008 MANITOWOCPrinted in USA Form No. YB5500 Series Part No. 04-022 / 0708 / 1M
www.manitowoc.com
AmericasBrazilAlphavilleTel: +55 11 3103 0200Fax: +55 11 4688 2013
MexicoMonterreyTel: +52 81 8124 0128Fax: +52 81 8124 0129
Europe, Middle East, AfricaAlgeriaHydraTel: +21 3 21 48 1173Fax: +21 3 21 48 1454
Czech RepublicNetvoriceTel: +420 317 78 9313Fax: +420 317 78 9314
FranceBaudemontTel: +33 385 28 2589Fax: +33 385 28 0430
CergyTel: +33 130 31 3150Fax: +33 130 38 6085
DecinesTel: +33 472 81 5000Fax: +33 472 81 5010
GermanyLangenfeldTel: +49 21 73 8909-0Fax: +49 21 73 8909 30
HungaryBudapestTel: +36 13 39 8622Fax: +36 13 39 8622
ItalyParabiagoTel: +390 331 49 3311Fax: +390 331 49 3330
NetherlandsBredaTel: +31 76 578 3999 Fax: +31 76 578 3978
PolandWarsawTel: +48 22 843 3824Fax: +48 22 843 3471
PortugalAlfenaTel: +351 229 69 8840Fax: +351 229 69 8848
LisbonTel: +351 212 109 340Fax: +351 212 109 349
RussiaMoscowTel: +7 495 641 2359Fax: +7 495 641 2358
U.A.E.DubaiTel: +971 4 3381 861Fax: +971 4 3382 343
U. K.MiddlesexTel: +44 1 895 43 0053Fax: +44 1 895 45 9500
SunderlandTel: +44 191 522 2000Fax: +44 191 522 2052
Asia – PacificAustraliaBrisbane38 Suscatand StreetRocklea Queensland 4106Tel: +617 3274 5879Fax: +617 3274 6558
Melbourne1/46 Venture DriveSunshine West VIC 3020Tel: +(03) 9336 1322Fax: +(03) 9336 1300
Sydney142 Magowar RoadGirraween, NSW 2145Tel: +61 02 9896 4433Fax: +61 02 9896 3122
ChinaBeijingTel: +86 10 58674761Fax: +86 10 58674760
Xi’anTel: +86 29 87891465Fax: +86 29 87884504
KoreaSeoulTel: +82 2 3439 0400Fax: +82 2 3439 0405
PhilippinesMakati CityTel: +63 2 844 9437Fax: +63 2 844 4712
Factories
BrazilAlphaville
ChinaZhangjiagang
FranceCharlieuLa ClayetteMoulins
GermanyWilhelmshaven
IndiaCalcuttaPune
ItalyNiella Tanaro
PortugalBaltarFânzeres
SlovakiaSaris
U.S.A.ManitowocPort WashingtonShady Grove
Regional Offices
AmericasManitowoc, Wisconsin, USATel: +1 920 684 6621Fax: +1 920 683 6278
Shady Grove, Pennsylvania, USATel: +1 717 597 8121Fax: +1 717 597 4062
Europe, Middle East, AfricaEcully, FranceTel: +33 472 18 2020Fax: +33 472 18 2000
Asia – PacificShanghai, ChinaTel: +86 21 51113579Fax: +86 21 51113578
SingaporeTel: +65 6264 1188Fax: +65 6862 4142
Regional Headquarters