Y Screw gauge - media.prusaprinters.org · This tool helps the user determine the gauge of screws....
2
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES 694.0 KB updated 25. 4. 2019 Summary This tool helps the user determine the gauge of screws. Hobby & Makers > Tools I recommend a 0.15mm layer height. The Author has not uploaded any G-codes. Try to search in User G-codes section or generate and upload your own. Darrens Workshop Screw gauge VIEW IN BROWSER updated 25. 4. 2019 | published 25. 4. 2019 screw-gauge-v0.stl 3D MODEL ONLY
Transcript of Y Screw gauge - media.prusaprinters.org · This tool helps the user determine the gauge of screws....
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
694.0 KBupdated 25. 4. 2019
Summary
This tool helps the user determine the gauge of screws.
Hobby & Makers > Tools
I recommend a 0.15mm layer height.
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
Darrens Workshop
Screw gauge
VIEW IN BROWSER
updated 25. 4. 2019 | published 25. 4. 2019
screw-gauge-v0.stl
3D M
ODEL
ONLY
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
