Y Raspberry Pi 3b+ (3b plus) sleeve cover one-piece · the cover thicker by 0.6mm and now 3b+ fits...
Transcript of Y Raspberry Pi 3b+ (3b plus) sleeve cover one-piece · the cover thicker by 0.6mm and now 3b+ fits...
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
406.5 KBupdated 31. 1. 2020
Summary
I'm a big fan of Walter's elegant one-piece cover for rpi3. However I foundout the cover does not fit rpi3b+ because the revised design features aslightly thicker PCB. (If you force the board in, the cover will be bentupward and not sit flush at the ports; see grey cover in picture #2.) I madethe cover thicker by 0.6mm and now 3b+ fits perfectly. It's a minorrevision and all credits go back to the original designer.
Hobby & Makers > Electronics
raspberrypicase raspberrypi3bplus raspberrypi3 raspberrypi
Category: Electronics
Find source .stl files on Thingiverse.com
i icefox
Raspberry Pi 3b+(3b plus) sleevecover one-piece
VIEW IN BROWSER
updated 31. 1. 2020 | published 31. 1. 2020
rpi3bcover.stl
3D M
ODEL
ONLY
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition