Y Insert/organizer for Holmes: Sherlock gegen Moriarty (Holmes: Sherlock & Mycroft) ·...
Transcript of Y Insert/organizer for Holmes: Sherlock gegen Moriarty (Holmes: Sherlock & Mycroft) ·...
Summary
This organizer contains quick start boxes for the two players, separatecard trays for the character and clues decks, and one bin for theinvestigation markers.
IMPORTANT: I was given the German version of the game (published byKosmos), in which for reasons unknown Sherlock is competing withMoriarty and not his brother Mycroft. From the information I can glancefrom BGG, it appears that all international versions use the same squarebox of 7.87 x 7.87 (or 20mm x 20mm) but the heights of those boxesseem to be all over the place; the English version for example isapparently only 1.1 inches tall compared to the 1.77 inches of the Germanversion. So if you're using an international version, your mileage may varyand the lid may get a bit pushed up. There are also differences in the rulesand the cards set but those shouldn't matter for this design.
You'll need to print two quick start boxes, which hold the three actionmarkers, six investigation markers ("Einflussmarker") (or five in the Englishversion, because, why not...), an "Übersichtskarte"(cheat sheet), and the"Rollenkarte" (role card) for each player. Looks like the English versiondoesn't have role cards as the Mycroft and Moriarty cards are useddifferently. Yeah, it's confusing
fuchsr
Insert/organizer forHolmes: Sherlockgegen Moriarty(Holmes: Sherlock& Mycroft)
VIEW IN BROWSER
updated 9. 5. 2020 | published 9. 5. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
102.8 KBupdated 17. 2. 2020
97.1 KBupdated 9. 5. 2020
109.9 KBupdated 9. 5. 2020
107.3 KBupdated 9. 5. 2020
Toys & Games > Board games
Resolution: 0.2 Infill: 10%
Notes:
Included are two versions for the character and clues trays. Version A usesabout 20% more material compared to B but also prints 20-25% faster. Itwould be my first choice as filament is dirt cheap.
[Note: In case you're wondering why the token tray is actually two piecesin the photo, it didn't fit on the bed of the only printer I had working at thetime (don't ask...), so I just cut it in half in my slicer]
Encouragement
If you like what I'm doing consider buying me a coffee or tipping.
characters_a.stl
characters_b.stl
clues_a.stl
clues_b.stl
71.4 KBupdated 9. 5. 2020
51.8 KBupdated 9. 5. 2020
48.7 KBupdated 9. 5. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
markers.stl
qs_box.stl
qs_lid.stl