Y Ikea Lack Lightbox - PrusaPrinters · Ikea Lack Lightbox VIEW IN BROWSER updated 29. 8. 2019 |...
2
LetsPrint3D Ikea Lack Lightbox VIEW IN BROWSER updated 29. 8. 2019 | published 29. 8. 2019 PRUSAPRINTERS Summary The Lack Table Lightbox is a project which uses the same concept as lack enclosures, but is instead intended for photography. By enclosing the rear and side walls with matte white walls to reflect light, and illuminating the area with strong LEDs mounted above, we can take professional quality photos. This is a remixed lack enclosure design, modified to include M5 bolt holes for both inner and outer walls that securely fasten on the inner side with nuts. The overall leg design was extended to 209mm (8.2") to accommodate larger objects, in my case taller 3D Printers such as the Creality Ender-3 and Creality CR-10. The additional extension length brings the total area height to 24" once assembled. This part is designed and shared as part of an on-going project guide at letsprint3d.net which will be published in the near future. Gadgets > Photo & Video lightbox table light lack ikea enclosure 3D MODEL ONLY
Transcript of Y Ikea Lack Lightbox - PrusaPrinters · Ikea Lack Lightbox VIEW IN BROWSER updated 29. 8. 2019 |...
LetsPrint3D
Ikea Lack Lightbox
VIEW IN BROWSER
updated 29. 8. 2019 | published 29. 8. 2019
PRUSAPRINTERS
Summary
The Lack Table Lightbox is a project which uses the same concept as lackenclosures, but is instead intended for photography. By enclosing the rearand side walls with matte white walls to reflect light, and illuminating thearea with strong LEDs mounted above, we can take professional qualityphotos.
This is a remixed lack enclosure design, modified to include M5 bolt holesfor both inner and outer walls that securely fasten on the inner side withnuts.
The overall leg design was extended to 209mm (8.2") to accommodatelarger objects, in my case taller 3D Printers such as the Creality Ender-3and Creality CR-10. The additional extension length brings the total areaheight to 24" once assembled.
This part is designed and shared as part of an on-going project guide at letsprint3d.net which will be published in the near future.
Gadgets > Photo & Video
lightbox table light lack ikea enclosure
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
178.5 KBupdated 29. 8. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (International License)
Public Domain
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
ikea_lack_lightbox_leg.stl
