Y Fleur de lis Mailbox Flag - PrusaPrinters...Unassociated tags: fluer de lis, fluer de lys, mail...
Transcript of Y Fleur de lis Mailbox Flag - PrusaPrinters...Unassociated tags: fluer de lis, fluer de lys, mail...
Summary
Needed a new mailbox flag and my wife wanted it to be fluer de lys. I sawone here on thingivers a few years ago but can't find it anymore. So Imade my own.
You will need a small screw. The one I used was about 15 mm long androughly 4 mm thick (shaft) with wide threads. Typically these are used forwood like door hinges etc. But it worked perfectly to hold this into place.
The flag is 170.5 mm tall/long. If you want to customize it you can clonethe document on OnShape.com.https://cad.onshape.com/documents/72ac8f1253b9c9e247841e51/w/dd6ed5aad5bb3f1aaf8ec669/e/af71fb6fd225caa410dd2653
Household > Outdoor & Garden
mailbox mail fluer flag
Unassociated tags: fluer de lis, fluer de lys, mail box, mail box flag,mailbox flag
Category: Replacement Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Mordiev
Fleur de lis MailboxFlag
VIEW IN BROWSER
updated 27. 2. 2020 | published 14. 2. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
56.3 KBupdated 14. 2. 2020
1.9 MBupdated 14. 2. 2020
Rafts: Doesn't Matter
Supports: No
Resolution: .15 mm
Infill: 15%
Filament: G star ABS or PETG RedNotes:
This was printed in ABS because it holds up in the elements better but ABStends to warp a lot while printing. This one started to as well. But I hadprinted it with a nice brim. I was able to use clear scotch tape to tape thebrim down to the print bed to hold it into place while the print finished. Itworked just fine.
I would recommend printing with ABS if you have an enclosure that cankeep the heat in so the parts don't warp. otherwise I suggest you printwith PETG. it won't last as long in the elements but it is the next bestoption.
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
flag_lock_nut.stl
fluer_de_lys_mailbox_flag.stl
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition