Y Corner brackets for 2020 Extrusion - PrusaPrinters€¦ · Summary Hello dear community! Golkun...
Transcript of Y Corner brackets for 2020 Extrusion - PrusaPrinters€¦ · Summary Hello dear community! Golkun...
Summary
Hello dear community!
Golkun did a really nice job by designing these very nice corner brackets.I only got M4 bolts & nuts so I've decided to remix this part.
After playing around I've added some designchanges to get rid of thevibrations my printer was producing.
These are now the final designs. Many thanks to Golkun. :)
[_] Instructions [_]
To prevent the holes from sagging, I've designed the stl files with differentlayer heights.There is one bridging layer in different thichknesses.
UPDATE
Now also as M5 ISO 4762 available
3D Printers > 3D Printers - Upgrades
stabilizer fixation cornerpiece cornerbracket corners
2020extrusion 2020
A Andreas
Corner brackets for2020 Extrusion
VIEW IN BROWSER
updated 16. 11. 2019 | published 16. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
285.8 KBupdated 16. 11. 2019
145.2 KBupdated 16. 11. 2019
587.4 KBupdated 16. 11. 2019
285.8 KBupdated 16. 11. 2019
285.8 KBupdated 16. 11. 2019
Category: 3D Printer Parts Print Settings
Printer: Hypercube by Tech2C
Resolution: 0.2
Infill: 40%
Notes:
4 Perimeters6 Top layers6 Bottom layers
cornerbracket_front-right_20x20_01mm.stl
cornerbracket_front-left_20x20_02mm.stl
corner_bracket_top_20x20_m5-03mm.stl
cornerbracket_front-right_20x20_015mm.stl
cornerbracket_front-left_20x20_01mm.stl
587.4 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
587.4 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
285.8 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
285.8 KBupdated 16. 11. 2019
corner_bracket_top_20x20_m5-02mm.stl
corner_bracket_front_left_20x20_m5-03mm.stl
corner_bracket_front_left_20x20_m5-02mm.stl
corner_bracket_top_20x20_m5-015mm.stl
corner_bracket_front_right_20x20_m5-02mm.stl
corner_bracket_front_left_20x20_m5-01mm.stl
cornerbracket_front-right_20x20_02mm.stl
corner_bracket_front_left_20x20_m5-015mm.stl
cornerbracket_front-left_20x20_015mm.stl
567.1 KBupdated 16. 11. 2019
567.1 KBupdated 16. 11. 2019
146.5 KBupdated 16. 11. 2019
587.4 KBupdated 16. 11. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
corner_bracket_front_right_20x20_m5-03mm.stl
corner_bracket_front_right_20x20_m5-01mm.stl
cornerbracket_top_20x20.stl
corner_bracket_top_20x20_m5-01mm.stl