XSP Series - Cree Canada | Commercial & Industrial LED...
Transcript of XSP Series - Cree Canada | Commercial & Industrial LED...
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
† See http://lighting.cree.com/warranty for warranty terms
Rev. Date: V6 10/19/2017
Product DescriptionDesigned from the ground up as a totally optimized LED street and area lighting system, the XSPSeries delivers incredible efficiency without sacrificing application performance. Beyond substantial energy savings and reduced maintenance, Cree achieves greater optical control with our NanoOptic® Precision Delivery Grid™ optic when compared to traditional cobra head luminaires. The XSP Series is the better alternative for traditional street and area lighting with quick payback and improved performance.Applications: Roadway, parking lots, walkways and general area spaces
Accessories
Field-Installed
Backlight Control ShieldXA-SP1BLS - Provides 1/2 mounting height cutoff
Bird SpikesXA-SP1BRDSPK
NanoOptic® Precision Delivery Grid™ optic
Assembled in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
CCT: 4000K (+/- 300K); 5700K (+/- 500K)
Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish
Performance Summary
XSP SeriesXSP1™ LED Street/Area Light – Single Module – Version B
Ordering InformationExample: BXSP-B-HT-2ME-A-40K-UL-BZ
BXSP B HT A
Product Version Mounting OpticInput Power Designator
CCT VoltageColor Options
Options
BXSP B HTHorizontal Tenon
2LG*Type II Long2ME*Type II Medium3ME*Type III Medium4ME*Type IV Medium
5METype V Medium5SHType V Short
A53W
40K4000K57K5700K
ULUniversal 120-277VUH**Universal347-480V
BKBlackBZBronzeSVSilverWHWhite
F Fuse - When code dictates fusing, use time delay fuse - Available for US applications only
G Small Four Point Mounting - Mounts to 1.25" (32mm) IP, 1.66" (42mm) O.D. horizontal tenon
J Large Four Point Mounting - Mounts to 2" (51mm) IP, 2.375" (60mm) O.D. horizontal tenon
ML Multi-Level - Refer to ML spec sheet for details - Available with UL voltage only - High: 100%, Low : 26%
N-Q9/Q8/Q7/Q6/Q5/Q4 Utility Label, NEMA® 7-Pin Photocell Receptacle & Field Adjustable Output
- Must select Q9, Q8, Q7, Q6, Q5 or Q4 - Settings Q3-Q1 are not available with N option - External wattage label per ANSI C136.15 based on Q setting selected
- 7-pin receptacle per ANSI C136.41 - Factory connected 0-10V dim leads - Photocell and shorting cap by others - Power/lumens may only be adjusted down in the field
- Refer to page 6 for power and lumen values
Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1 Field Adjustable Output
- Must select Q9, Q8, Q7, Q6, Q5, Q4, Q3, Q2, or Q1
- Power/lumens are fully adjustable in the field
- Refer to page 6 for power and lumen values
R NEMA® 7-Pin Photocell Receptacle
- 7-pin receptacle per ANSI C136.41
- Factory connected 0-10V dim leads
- Photocell and shorting cap by others
UTL Utility Label - Includes exterior wattage label per ANSI C136.15 that indicates the maximum available wattage of the luminaire
* Available with Backlight Shield when ordered with field-installed accessory (see table above)** 347-480V utilizes magnetic step-down transformer. For input power for 347-480V, refer to the Electrical Data table
23.7"(601mm)
5.1"(129mm)
9.3"(237mm)
Multi-Level Sensor location(ordered as an option)
Shown with PT-1H Tenon
Shown with Type 5ME Optics
Voltage Weight
120-277V 18 lbs. (8kg)
347-480V 22 lbs. (9kg)
Asymmetric
Symmetric
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
Product Specifications
CONSTRUCTION & MATERIALS• Die cast aluminum housing
• Tool-less entry
• Mounts on 1.25" (32mm) IP, 1.66" (42mm) O.D. or 2" (51mm) IP, 2.375" (60mm) O.D. horizontal tenon (minimum 8" [203mm] in length) and is adjustable +/- 5˚ to allow for fixture leveling (includes two axis T-level to aid in leveling)
• Luminaire secures with two mounting bolts standard; optional four point mounting available
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
• Weight: 120-277V: 18 lbs. (8kg); 347-480V: 22 lbs. (9kg)
ELECTRICAL SYSTEM• Input Voltage: 120-277V or 347-480V, 50/60Hz
• Power Factor : > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Class 2 driver
• Integral 10kV surge suppression protection
• When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current
• Designed with 0-10V dimming capabilities. Controls by others
• 10V Source Current: 0.15mA
REGULATORY & VOLUNTARY QUALIFICATIONS• cULus Listed• Suitable for wet locations• Certified to ANSI C136.31-2001, 3G bridge and overpass vibration
standards• Meets CALTrans 611 Vibration testing• 10kV surge suppression protection tested in accordance with IEEE/ANSI
C62.41.2• Meets FCC Part 15, Subpart B, Class A standards for conducted and
radiated emissions • Luminaire and finish endurance tested to withstand 5,000 hours of
elevated ambient salt fog conditions as defined in ASTM Standard B 117• Meets Buy American requirements within ARRA
• DLC qualified versions available. Some exceptions apply. Please refer to https://www.designlights.org/search/ for most current information
• RoHS compliant. Consult factory for additional details
1 Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors2 In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)3 In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)
Electrical Data*
Input PowerDesignator
System Watts120-277V
System Watts347-480V
Total Current (A)
120V 208V 240V 277V 347V 480V
A 53 59 0.44 0.25 0.22 0.20 0.17 0.15
XSP1™ LED Street/Area Luminaire – Single Module – Version B
* Electrical data at 25˚C (77˚F). Actual wattage may differ by +/- 10% when operating between 120-480V +/- 10%
Recommended XSP Series Version B Luminaire Lumen Maintenance1
Ambient Optic InitialLMF
25K hrProjected2
LMF
50K hrProjected2
LMF
75K hrProjected2/
Calculated3
LMF
100K hrCalculated3
LMF
5˚C(41˚F)
Asymmetric 1.04 1.02 1.01 1.012 1.00
Symmetric 1.05 0.94 0.86 0.803 0.74
10˚C(50˚F)
Asymmetric 1.03 1.01 1.00 1.002 0.99
Symmetric 1.04 0.93 0.85 0.793 0.73
15˚C(59˚F)
Asymmetric 1.02 1.00 0.99 0.982 0.98
Symmetric 1.03 0.92 0.85 0.783 0.72
20˚C(68˚F)
Asymmetric 1.01 0.99 0.98 0.972 0.97
Symmetric 1.01 0.90 0.83 0.773 0.71
25˚C(77˚F)
Asymmetric 1.00 0.98 0.97 0.962 0.96
Symmetric 1.00 0.89 0.82 0.763 0.70
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
PhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series-1
XSP1™ LED Street/Area Luminaire – Single Module – Version B
RESTL Test Report #: PL10348-002ABXSP-B-**-2ME-A-40K-UL w/XA-SP1BLSInitial Delivered Lumens: 4,013
1253
2506
3759
5012150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-2ME-A-40K-UL w/XA-SP1BLSMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,133Initial FC at grade
.2.1
70˚
1
80'
20'
20'
40'
6.1
0m
6.1
12.2
40'60' 20' 0' 20' 40' 60'
12.218.3 6.1 0m 6.1 12.2 18.3
80'
24.4 24.4
0'
40' 12.230.5 30.5
100' 100'
Position of vertical planeof maximum candlepower.
18.360'
.5
CURB LINE
RESTL Test Report #: PL04512-001BXSP-B-**-2LG-A-40K-UL w/XA-SP1BLSInitial Delivered Lumens: 3,837
1869
3738
5607
7476150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-2LG-A-40K-UL w/XA-SP1BLSMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 3,784Initial FC at grade
80' 80'
20'
20'
40'
0m
6.1
6.1
12.2
12.2
40' 40'60' 60'20' 20'0'
12.218.3 6.1 0m 6.1 12.2 18.324.4 24.4
0'
40'
30.5 30.5 36.636.642.7 42.7
100' 100'120' 120'140' 140'
18.3
18.3
60'
24.4
24.4
80'
80'
60'
Position of vertical planeof maximum candlepower.
1
CURB LINE
.5
80˚
.2.1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
Type II Long w/BLS Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings**
Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 3,784 B1 U0 G1 4,050 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
2LG
RESTL Test Report #: PL04169-001BXSP-B-**-2LG-A-40K-ULInitial Delivered Lumens: 4,956
1913
3826
5739
7653150°
120° 120°
60°
90° 90°
60°
30°
150°
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-2LG-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,979Initial FC at grade
.2.1
70˚
1
80'
20'
20'
40'
6.1
0m
6.1
12.2
40'60' 20' 0' 20' 40' 60'
12.218.3 6.1 0m 6.1 12.2 18.3
80'
24.4 24.4
0'
40' 12.230.5 30.5
100' 100'
Position of vertical planeof maximum candlepower.
18.360'
.5
CURB LINE
Type II Long Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,979 B2 U0 G1 5,329 B2 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
Type II Medium w/BLS Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings**
Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,133 B1 U0 G1 4,592 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
2ME
RESTL Test Report #: PL10348-001ABXSP-B-**-2ME-A-40K-ULInitial Delivered Lumens: 5,270
1639
3278
4917
6556150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-2ME-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,806Initial FC at grade
.2.1
70˚
1
80'
20'
20'
40'
6.1
0m
6.1
12.2
40'60' 20' 0' 20' 40' 60'
12.218.3 6.1 0m 6.1 12.2 18.3
80'
24.4 24.4
0'
40' 12.230.5 30.5
100' 100'
Position of vertical planeof maximum candlepower.
18.360'
.5
CURB LINE
Type II Medium Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,806 B1 U0 G1 5,340 B1 U0 G2
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
PhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series-1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
Type III Medium w/BLS Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings**
Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,085 B1 U0 G1 4,539 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
3ME
RESTL Test Report #: PL10397-001ABXSP-B-**-3ME-A-40K-ULInitial Delivered Lumens: 5,273
1066
2131
3197
4262150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-3ME-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,806Initial FC at grade
.5.21
60˚
.1
80'80'
20'
20'
40'
6.1
0m
6.1
12.2
40'60' 20' 0' 20' 40' 60'
12.218.3 6.1 0m 6.1 12.2 18.3
80'
24.4 24.4
24.4
0'
40' 12.230.5 30.5
100' 100'
18.360'
Position of vertical planeof maximum candlepower.
CURB LINE
Type III Medium Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,806 B1 U0 G1 5,340 B1 U0 G1
XSP1™ LED Street/Area Luminaire – Single Module – Version B
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
Type IV Medium w/BLS Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings**
Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 3,983 B1 U0 G1 4,263 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
4ME
RESTL Test Report #: PL04171-001BXSP-B-**-4ME-A-40K-ULInitial Delivered Lumens: 4,947
995
1990
2984
3979150°
120° 120°
60°
90° 90°
60°
30°
150°
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-4ME-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,979Initial FC at grade
0m6.1 18.312.218.3
18.3
0m0'
6.120'
6.120'
60'
24.480'
12.240'
12.240'
60'
40'
18.3
60' 20'
12.2
40'
6.1
20'0' 60'
24.4
80'
24.4
80'
.2
.1
Position of vertical planeof maximum candlepower.
45˚
1
.5
30.5100'
CURB LINE
Type IV Medium Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,979 B1 U0 G1 5,329 B2 U0 G1
RESTL Test Report #: PL10397-002ABXSP-B-**-3ME-A-40K-UL w/XA-SP1BLSInitial Delivered Lumens: 3,749
880
2640
3520
1760
150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-3ME-A-40K-UL w/XA-SP1BLSMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,085Initial FC at grade
.5.21
65˚
.1
80'80'
20'
20'
40'
6.1
0m
6.1
12.2
40'60' 20' 0' 20' 40' 60'
12.218.3 6.1 0m 6.1 12.2 18.3
80'
24.4 24.4
24.4
0'
40' 12.230.5 30.5
100' 100'
18.360'
Position of vertical planeof maximum candlepower.
CURB LINE
RESTL Test Report #: PL04514-001BXSP-B-**-4ME-A-40K-UL w/XA-SP1BLSInitial Delivered Lumens: 3,973
984
1968
2953
3937150˚
120˚ 120˚
60˚
90° 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-4ME-A-40K-UL w/XA-SP1BLSMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 3,983Initial FC at grade
0m6.1 18.312.2
30.5
18.3
18.3
24.4
24.4
0m0'
6.120'
6.120'
60'
80'
100'
12.240'
12.240'
60'
40'
18.3
60' 20'
12.2
40'
6.1
20'0' 60'
24.4
80'
24.4
80'
Position of vertical planeof maximum candlepower.
80'
100'30.5 30.5
30.5
100'100'
.1
.2
45˚
.5
1
CURB LINE
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
XSP1™ LED Street/Area Luminaire – Single Module – Version B
PhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: http://lighting.cree.com/products/outdoor/street-and-roadway/xsp-series-1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
5ME
RESTL Test Report #: PL02880-001BXSP-B-**-5ME-B-40K-ULInitial Delivered Lumens: 8,714
934
1868
2802
3736150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-5ME-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,049Initial FC at grade
0m6.1 18.312.2
18.3
18.3
0m0'
6.120'
6.120'
60'
24.480'
24.480'
12.240'
12.240'
60'
40'
18.3
60' 20'
12.2
40'
6.1
20'0' 60'
24.4
80'
24.4
80'
.2 .1
Position of vertical planeof maximum candlepower.
0˚
CURB LINE
Type V Medium Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,049 B3 U1 G3 4,218 B3 U1 G3
Horizontal Tenon Mount – Weight: 120-277V: 18 lbs. (8kg); 347-480V: 22 lbs. (9kg)
Single 2 @ 90˚ 2 @ 180˚ 3 @ 90˚ 4 @ 90˚
Tenon Configuration If used with Cree tenons, please add tenon EPA with luminaire EPA
PD-1H4; PT-1H PD-2H4(90); PT-2H(90) PD-2H4(180); PT-2H(180) PD-3H4(90); PT-3H(90) PD-4H4(90); PT-4H(90)
0.71 1.02 1.43 1.74 2.04
Tenons and Brackets‡ (must specify color)
Square Internal Mount Horizontal Tenons (Aluminum)- Mounts to 4" (102mm) square aluminum or steel polesPD-1H4 – Single PD-3H4(90) – 90˚ TriplePD-2H4(90) – 90˚ Twin PD-4H4(90) – 90˚ QuadPD-2H4(180) – 180˚ Twin
Wall Mount Brackets- Mounts to wall or roofWM-2L – Extended Horizontal
Round External Mount Horizontal Tenons (Aluminum)- Mounts to 2.375"-3" (60-76mm) O.D. round aluminum or steel poles or tenons- Mounts to 3" (76mm), 5" (127mm), or 6" (152mm) square pole with PB-1A* tenonPT-1H – Single PT-3H(90) – 90˚ TriplePT-2H(90) – 90˚ Twin PT-4H(90) – 90˚ QuadPT-2H(180) – 180˚ Twin
Direct Arm Pole Adaptor Bracket - Mounts to 3-6" (76-152mm) round or square aluminum or steel polesXA-TMDA8
Tenon EPA
Part Number EPA
PD Series Tenons 0.09
PT Series Tenons 0.10
WM-2L 0.13
XA-TMDA8 0.19
‡ Refer to the Bracket and Tenons spec sheet for more details* Specify pole size: 3 (3"), 5 (5"), or 6 (6") for single, double or triple luminaire orientation or 5 (5") or 6 (6") for quad luminaire orientation
Luminaire EPA
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
5SH
RESTL Test Report #: PL02880-002BXSP-B-**-5SH-B-40K-ULInitial Delivered Lumens: 9,321
755
1511
2266
3022150˚
120˚ 120˚
60˚
90˚ 90˚
60˚
30˚
150˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
BXSP-B-**-5SH-A-40K-ULMounting Height: 25' (7.6m) A.F.G.Initial Delivered Lumens: 4,293Initial FC at grade
0m6.1 18.312.2
18.3
18.3
0m0'
6.120'
6.120'
60'
24.480'
24.480'
12.240'
12.240'
60'
40'
18.3
60' 20'
12.2
40'
6.1
20'0' 60'
24.4
80'
24.4
80'
.2
Position of vertical planeof maximum candlepower.
45˚
CURB LINE
.1
Type V Short Distribution
Input PowerDesignator
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
A 4,293 B3 U0 G2 4,472 B3 U0 G2
© 2017 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks, and the Cree logo, Precision Delivery Grid™ and XSP1™ are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. NEMA® is a registered trademark of the National Electrical Manufacturers Association. The DLC QPL logo is a registered trademark of Northeast Energy Efficiency Partnerships, Inc.
T (800) 236-6800 F (262) 504-5415US: lighting.cree.com T (800) 473-1234 F (800) 890-7507Canada: www.cree.com/canada
XSP1™ LED Street/Area Luminaire – Single Module – Version B
Field Adjustable Output (Q9/Q8/Q7/Q6/Q5/Q4/Q3/Q2/Q1) Option Description:The Field Adjustable Output option enables luminaires within the XSP Series on this page to be tuned to the exact needs of a particular application through multiple levels of adjustment. When a setting other than Q9 is specified with the N option, that setting becomes the maximum wattage of the luminaire, and a NEMA label reflecting this wattage is affixed to the luminaire. Lumen output and power consumption can only be adjusted downward from the maximum wattage.
Q Option Power & Lumen Data
Q Option Setting CCT
System Watts† Lumen Values Optics Qualified on DLC QPL
120-277V
347-480V 2LG 2ME 3ME 4ME 5ME 5SH 2LG w/BLS 2ME w/BLS 3ME w/BLS 4ME w/BLS DLC Standard
940K
53 594,979 4,806 4,806 4,979 4,049 4,293 3,784 4,133 4,085 3,983 2LG,2ME,3ME,4ME
57K 5,329 5,340 5,340 5,329 4,218 4,472 4,050 4,592 4,539 4,263 2LG,2ME,3ME,4ME
840K
48 544,531 4,373 4,373 4,531 3,725 3,950 3,443 3,761 3,717 3,625 2LG,2ME,3ME,4ME
57K 4,849 4,859 4,859 4,849 3,881 4,114 3,686 4,179 4,130 3,879 2LG,2ME,3ME,4ME
740K
43 504,282 4,133 4,133 4,282 3,442 3,649 3,254 3,554 3,513 3,425 2LG,2ME,3ME,4ME
57K 4,583 4,592 4,592 4,583 3,585 3,801 3,483 3,949 3,904 3,666 2LG,2ME,3ME,4ME,5SH
640K
38 463,834 3,701 3,701 3,834 3,158 3,349 2,914 3,182 3,145 3,067 2LG,2ME,3ME,4ME
57K 4,103 4,112 4,112 4,103 3,290 3,488 3,119 3,536 3,495 3,283 2LG,2ME,3ME,4ME,5SH
540K
34 413,485 3,364 3,364 3,485 2,834 3,005 2,649 2,893 2,860 2,788 2LG,2ME,3ME,4ME,5ME,5SH
57K 3,730 3,738 3,738 3,730 2,953 3,130 2,835 3,214 3,177 2,984 2LG,2ME,3ME,4ME,5SH
440K
29 363,037 2,932 2,932 3,037 2,389 2,533 2,308 2,521 2,492 2,430 2LG,2ME,3ME,4ME
57K 3,251 3,257 3,257 3,251 2,489 2,638 2,471 2,801 2,769 2,600 2LG,2ME,3ME,4ME
3*40K
27 342,589 2,499 2,499 2,589 1,984 2,104 1,968 2,149 2,124 2,071
N/A57K 2,771 2,777 2,777 2,771 2,067 2,191 2,106 2,388 2,360 2,217
2*40K
19 261,992 1,922 1,922 1,992 1,498 1,588 1,514 1,653 1,634 1,593
N/A57K 2,132 2,136 2,136 2,132 1,561 1,655 1,620 1,837 1,816 1,705
1*40K
15 211,444 1,394 1,394 1,444 1,093 1,159 1,097 1,199 1,185 1,155
N/A57K 1,545 1,549 1,549 1,545 1,139 1,207 1,175 1,332 1,316 1,236
* Not available with N option† Electrical and lumen data at 25˚C (77˚F). Actual wattage and lumen output may differ by +/-10% when operating between 120-480V +/-10%