XPDP56 Release Notes
-
Upload
diegomatta13 -
Category
Documents
-
view
310 -
download
0
Transcript of XPDP56 Release Notes
1 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Release Notes – Milestone XProtect® Device Pack Version 5.6
It is with great pleasure that Milestone Systems as of August 25th 2011 is shipping
Milestone XProtect Device Pack Version 5.6
IP Camera and Video Server Compatibility Overview
Cameras, firmware and feature entries highlighted in BOLD are new to this release.
This release note lists the devices in Device Pack 5.6 that are supported in the following systems:
• XProtect Basis 4.0 versions
• XProtect Go 1.0 – 2.0 versions
• XProtect Basis+ 4.0 - 6.5 versions
• XProtect Essential 1.0 – 2.0 versions
• XProtect Professional 4.0 - 8.0 versions
• XProtect Enterprise 5.0 – 8.0 versions
• XProtect Matrix 2.1 - 2.3 versions
Devices that are supported in XProtect Corporate are listed in the XPCO_DP56 Release notes.
MPEG4 is supported in XProtect Enterprise 5.5a or newer, XProtect Professional 4.5b or newer, XProtect Basis+ 4.0f or newer and XProtect Basis 4.0f or newer.
H.263 is supported in XProtect Enterprise 5.5c or newer, XProtect Professional 4.5c or newer, XProtect Basis+ 4.0g or newer and XProtect Basis 4.0g or newer.
H.264 is supported in XProtect Enterprise 6.5d or newer, XProtect Professional 6.5a or newer, XProtect Basis+ 6.5a or newer.
H.264 with interlaced field-encoding supported in XProtect Enterprise 8.0b or newer, XProtect Professional 8.0a or newer, Xprotect Essential 2.0a or newer and
XProtect Go 2.0a or newer.
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
360 Vision IP
Dome 320 20090317 1 MPEG4 0 / 0 - � Type 1 � - username -
ACTi ACD-2000Q 361 V3.03.01 4 JPEG
MPEG4
2 / 2
(VMD)
(V)
Alert
Port - - -
Two-
Way Admin -
2 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi ACD-2100
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi ACD-2200 173
V2.02.07,
V2.03.01,
V2.03.06
4 JPEG
MPEG4
8 / 8
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi ACD-2300 152 V2.03.06 8 JPEG
MPEG4
16 / 16
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi ACD-2400 228 V2.03.06 16 JPEG
MPEG4
32 / 32
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi ACM-1011 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-1100
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-1230
series 105
V2.03.01,
V3.08.08,
V3.09.14
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-1310
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-1430
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-1511 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
3 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi ACM-3001 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3011 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3100
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3210
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3300
series
105
V3.03.07,
V3.05.05,
V3.08.08
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3400
series 105
V2.03.01,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-3511 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3601 105 V3.11.13 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-3701 105 V3.10.22 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-4000
series 105 V3.09.14 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-4100
series
105 V3.05.05,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-4200
series 105
V2.03.01,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-5001 105 V3.09.14 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
4 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi ACM-5600
series 105
V2.03.01,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-5711 105 V3.08.08 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-5801 105 V3.11.13 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-7400
series 105
V2.03.01,
V3.08.08,
V3.09.14
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-7511 105 V3.10.22 1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi ACM-8100
series 105
V2.03.01,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-8200
series 105
V2.03.01,
V3.08.08 1
JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin -
ACTi ACM-8201 105 V3.11.13 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin -
ACTi ACM-8211 105 V3.11.11 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin -
ACTi ACM-8511 105 V3.11.11 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin -
ACTi CAM-5100H 105
V1.02.02,
V1.05.01,
V1.05.08
1 MPEG4 0 / 0 - - - - - Admin
Older firmware is no
longer supported.
Tested by camera
manufacturer.
ACTi CAM-5100M 105
V1.02.02,
V1.05.01,
V1.05.08
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5100S 105
V1.02.02,
V1.05.01,
V1.05.08
1 MPEG4 0 / 0 - - - - - Admin Older firmware is no
longer supported.
5 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi CAM-5120 105
V1.02.02,
V1.05.01,
V1.05.08
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5130 105 V1.12.00 1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5140 105 V1.12.00 1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
ACTi CAM-5150 105 V1.12.00 1 MPEG4 0 / 0
- - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5200
series 105
V2.02.05,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi CAM-5220
series 105
V2.02.05,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer.
ACTi CAM-5300
series 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5320
series 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-5500 105
V2.05.01,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
6 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi CAM-5520 105
V2.05.01,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - - - Admin
Tested by camera
manufacturer.
ACTi CAM-6100 105 V1.03.06,
V1.05.01 1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-P (6100)
must be used on this
camera).
ACTi CAM-6110 105 V1.02.02,
V1.05.01 1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-P (6100)
must be used on this
camera).
ACTi CAM-6120 105 V1.03.06,
V1.05.01 1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-P (6100)
must be used on this
camera).
ACTi CAM-6200 105
V1.03.06,
V1.04.01,
V1.05.01
1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-D or
Pelco-P must be used on
this camera.
ACTi CAM-6210 105
V1.03.06,
V1.04.01,
V1.05.01
1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-D or
Pelco-P must be used on
this camera.
7 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi CAM-6220 105
V1.03.06,
V1.04.01,
V1.05.01
1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-D or
Pelco-P must be used on
this camera.
ACTi CAM-6230 105
V1.03.06,
V1.04.01,
V1.05.01
1 MPEG4 0 / 0 - � Type 3 � - Admin
Tested by camera
manufacturer. PTZ
protocol Pelco-D or
Pelco-P must be used on
this camera.
ACTi CAM-6500 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
ACTi CAM-6510 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
8 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi CAM-6520 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
ACTi CAM-6600 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
ACTi CAM-6610 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
9 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi CAM-6620 105
V2.03.02,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
ACTi CAM-6630 105 V.2.08.11 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Tested by camera
manufacturer. Support
for relative positioning
PTZ cameras using
Pelco-P, Pelco-D or
Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
ACTi CAM-7100-
series 105
V2.00.06,
V2.03.02,
V2.05.12,
V2.06.12,
V.2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer
ACTi CAM-7200-
series 105
V2.03.02,
V2.05.12,
V2.06.12,
V.2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer
ACTi CAM-7300-
series 105
V2.05.01,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer
10 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi SED-2100R 105
V1.02.02,
V1.04.17,
V1.05.01
1 MPEG4 0 / 0 - � Type 1
or 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2100S 105
V1.02.02,
V1.04.17,
V1.05.01
1 MPEG4 0 / 0 - � Type 1
or 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2120 /
2120T 105
V2.02.05,
V2.05.12
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2130 105
V2.03.02,
V2.05.12, V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2140 105
V2.03.02,
V2.05.12, V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2200 105
V1.03.06 1 MPEG4 0 / 0 - �
Type 1
or 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol
ACTi SED-2300Q 117
V1.03.02,
1.04.02,
V1.05.02
1 MPEG4 0 / 0 - - - - - Admin
Only one channel or
quad view channel can
be monitored at the
same time
ACTi SED-2310Q 117 V2.00.03,
V2.01.03 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Only one channel or
quad view channel can
be monitored at the
same time
11 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi SED-2320Q 117
V2.00.03,
V2.01.03,
V2.06.12
1 MPEG4 0 / 0 - - - - One-
Way Admin
Only one channel or
quad view channel can
be monitored at the
same time
ACTi SED-2400 105
V2.02.05,
V2.05.12,
V2.06.12,
V2.08.11
1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2410 141 V2.02.06 2 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2420 141 V2.02.06,
V2.02.09 2
JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2600 152
V2.02.01,
V2.02.07,
V2.03.06
8 MPEG4 16 / 16
(VMD) Poll � Type 3 � - Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi SED-2610 152
V2.02.01,
V2.02.07,
V2.03.06
8 MPEG4 16 / 16
(VMD) Poll � Type 3 �
Two-
Way Admin
Only support for PTZ
camera using Pelco-P,
Pelco-D and Dynacolor
protocol.
ACTi TCD-2100 385 V4.06.09 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll �
Type 1
or 3 � - Admin
No motion events
available in JPEG.
Tested by camera
manufacturer.
ACTi TCD-2500 385 V4.06.09,
V4.08.05 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
No motion events
available in JPEG.
12 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi TCM-1231 334 V4.06.09 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-1511 334 V4.06.09 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-3011 334 V4.08.05 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-3411 334 V4.07.15 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-3511 334 V4.07.15 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-4101 327 V4.06.09 1
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-4201 334 V4.08.05 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-4301 327 V4.04.03,
V4.08.05 1
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-5001 334 V4.07.15 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
13 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ACTi TCM-5311 334 V4.04.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-5601 334 V4.06.09 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-7011 334 V4.07.15,
V4.08.05 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
No motion events
available in JPEG.
ACTi TCM-7411 334 V4.07.15 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TCM-7811 334 V4.08.05 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way Admin
Tested by camera
manufacturer. No
motion events available
in JPEG.
ACTi TMU-9501 385 V4.06.09 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
No motion events
available in JPEG.
ACTi TMU-9611 385 V4.06.09 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
No motion events
available in JPEG.
ACTi TMU-9811 385 V4.06.09 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
No motion events
available in JPEG.
ACTi TMU-9911 385 V4.06.09 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
No motion events
available in JPEG.
Adam 6050 129 1.27 0 - 12 / 6 Poll - - - - - Require a DLK like all
other devices
14 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Adam 6060 108 1.21 0 - 6 / 6 Poll - - - - - Require a DLK like all
other devices
Adam 6066 108 1.04 0 - 6 / 6 Poll - - - - - Require a DLK like all
other devices
AgileMesh 100 145 NO-2.3.1b-
4M-M 1 JPEG 0 / 0 - - - - - admin -
American
Dynamics
VideoEdge Dome
157 1.44 1 JPEG
MPEG4 0 / 0 - - - - - admin -
American
Dynamics
VideoEdge IP Box
Camera
157 1.44 1 JPEG
MPEG4 0 / 0 - - - - - admin -
APPRO LC-7224
series 156 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
APPRO LC-7226
series 157 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Apro Technology
H1000 series 255
V1.103G-
007 1 H.264
1 / 1
(VMD)
(V)
SMTP � Type 3 � Two-
Way admin -
Arecont AV1300 140 64327,
64328 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV1305 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV1310 140 65141,
65142 1 JPEG
1 / 1
(VMD) - - - - - - Tested by manufacturer.
Arecont AV1315 140 65191 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - - -
15 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Arecont AV1325 140 65191 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - - -
Arecont AV1355 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV2100 140 64327,
64328 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV2105 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV2110 140 65141,
65142 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV2155 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV2805 140 65167 1 JPEG
H.264
1 / 1
(VMD) - - - - - - -
Arecont AV2815 140 65173 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - - -
Arecont AV2825 140 65192 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - - -
Arecont AV3100 140 64327,
64328 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV3105 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV3110 140 65141,
65142 1 JPEG
1 / 1
(VMD) - - - - - - Tested by manufacturer.
16 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Arecont AV3115
140 65178 1 JPEG H.264
1 / 1 (VMD)
- - - - - - -
Arecont AV3125
140 65204 1 JPEG H.264
1 / 1 (VMD)
- - - - - - -
Arecont AV3130 140 64329 1 JPEG 0 / 0
(VMD) - - - - - - -
Arecont AV3135 140 65130 1 JPEG
H.264
1 / 1
(VMD) - - - - - - -
Arecont AV3155 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV5100 140 64327,
64328 1 JPEG
1 / 1
(VMD) - - - - - - -
Arecont AV5105 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
Arecont AV5110 140 65141,
65142 1 JPEG
1 / 1
(VMD) - - - - - - Tested by manufacturer.
Arecont AV5115
140 65178 1 JPEG H.264
1 / 1 (VMD)
- - - - - - -
Arecont AV5125
140 65204 1 JPEG H.264
1 / 1 (VMD)
- - - - - - Tested by design using AV3125.
Arecont AV5155 140 65129,
65130 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Streaming mode TCP
tunneled added in
DP 4.3
17 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Arecont AV8180 154 65010 4 JPEG 0 / 0 - - - - - -
In an Xprotect
Enterprise system 1
camera license will
cover all 4 channels.
Older firmware no
longer supported.
Arecont AV8185 154 65031 4 JPEG
H.264 0 / 0 - - - - - -
In an Xprotect
Enterprise system 1
camera license will
cover all 4 channels.
Arecont AV8360 154 65010 4 JPEG 0 / 0 - - - - - -
In an Xprotect
Enterprise system 1
camera license will
cover all 4 channels.
Older firmware no
longer supported.
Arecont AV8365 154 65031 4 JPEG
H.264 0 / 0 - - - - - -
In an Xprotect
Enterprise system 1
camera license will
cover all 4 channels.
Arecont AV10005 140
65147,
65148,
65197 1
JPEG
H.264
1 / 1
(VMD) - - - - - -
Max. supported
resolution is
3548x2652.
AVS Uriel Mpix
13 382 1.5 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - - - admin
1280x960 not supported
in MPEG4.
AXIS 200+ 1 1.42 1 JPEG 1 / 0 FTP - - - - root -
AXIS 205 15 4.01, 4.03,
4.05 1 JPEG 0 / 0 - - - - - root -
AXIS 206 19 4.10, 4.11,
4.20, 4.40.1 1 JPEG 0 / 0 - - - - - root -
AXIS 206M 19 4.10, 4.11,
4.20, 4.40.1 1 JPEG 0 / 0 - - - - - root -
18 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 206W 19 4.10, 4.11,
4.20, 4.40 1 JPEG 0 / 0 - - - - - root -
AXIS 207 18 4.22, 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(B)
Alert
Port - - - - root
Axis Special Events (B)
requires 4.40 or higher.
AXIS 207MW 18 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
One-
Way root
Audio support requires
firmware 4.40 or higher.
Axis Special Events (A
and B) requires 4.40 or
higher.
AXIS 207W 18 4.33, 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
One-
Way root
Audio support requires
firmware 4.40 or higher.
Axis Special Events (A
and B) requires 4.40 or
higher.
Axis 209FD 168 4.43 1 JPEG
MPEG4
0 / 0
(P)
(VMD)
(B, Ta,
Te)
- - - - - root
Axis Special Events (B,
Ta and Te) requires
4.43 or higher.
Axis 209MFD 168 4.45 1 JPEG
MPEG4
0 / 0
(P)
(VMD)
(B, Ta,
Te)
- - - - - root
Axis Special Events (B,
Ta and Te) requires
4.45 or higher.
AXIS 210 18
4.01, 4.02
4.11, 4.20,
4.30, 4.40
1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(B)
Alert
Port - - - - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B)
requires 4.40 or higher.
19 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 210A 18 4.30, 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
Two-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher.
AXIS 211 18
4.02, 4.11,
4.20, 4.30,
4.40
1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(B)
Alert
Port - - - - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B)
requires 4.40 or higher.
AXIS 211A 18 4.13, 4.30,
4.40 1
JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
Two-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher.
AXIS 211M 18 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
Two-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher.
Axis 211W 18 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port - - -
Two-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher.
AXIS 212 PTZ 138 4.34, 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B)
Alert
Port �
Type
1 & 2 �
One-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher.
AXIS 213 PTZ 22
4.02, 4.03,
4.12, 4.30,
4.35
1 JPEG
MPEG4
2 / 3
(P)
(VMD)
(B)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (B)
requires 4.35 or higher.
20 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 214 PTZ 123 4.32, 4.40 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (A,
B and Te) requires 4.40
or higher.
Axis 215 PTZ 123 4.40, 4.49 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (A,
B and Te) requires 4.40
or higher.
Axis 215 PTZ-E 123 4.40, 4.49 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 � - root
Axis Special Events (B
and Te) requires 4.40 or
higher.
AXIS 216FD 122 4.32, 4.34,
4.40, 4.47 1
JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
One-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher. Axis Special
Events (Ta) requires
4.47 or higher
AXIS 216MFD 122 4.40, 4.47 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
One-
Way root
Axis Special Events (A
and B) requires 4.40 or
higher. Axis Special
Events (Ta) requires
4.47 or higher
AXIS 221 25 4.15, 4.20,
4.30, 4.45 1
JPEG
MPEG4
2 / 1
(P)
(VMD)
(B, Ta,
Te)
Alert
Port - - - - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B,
Ta and Te) requires
4.45 or higher.
21 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 223M 153 4.40, 4.45 1 JPEG
MPEG4
2 / 1
(P)
(VMD)
(A, B,
Ta,Te)
Alert
Port - - -
One-
Way root
Axis Special Events (A,
B, Ta and Te) requires
4.45 or higher.
AXIS 225FD 25 4.31, 4.45 1 JPEG
MPEG4
2 / 1
(P)
(VMD)
(B, Ta,
Te)
Alert
Port - - - - root
Axis Special Events (B,
Ta and Te) requires
4.45 or higher.
AXIS 231D 23 4.02, 4.20,
4.30, 4.40 1
JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, Te)
Alert
Port �
Type
1 & 2 � - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B
and Te) requires 4.40 or
higher.
AXIS 231D+ 23 4.35, 4.40 1 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, Te)
Alert
Port �
Type
1 & 2 � - root
Axis Special Events (B
and Te) requires 4.40 or
higher.
AXIS 232D 23 4.02, 4.20,
4.30, 4.40 1
JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, Te)
Alert
Port �
Type
1 & 2 � - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B
and Te) requires 4.40 or
higher.
AXIS 232D+ 23 4.35, 4.40 1 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, Te)
Alert
Port �
Type
1 & 2 � - root
Axis Special Events (B
and Te) requires 4.40 or
higher.
AXIS 233D 23 4.40, 4.42,
4.48.4 1
JPEG
MPEG4
4 / 4
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (A,
B and Te) requires 4.42
or higher.
22 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 240 2 1.13 4 JPEG 1 / 0 FTP � Type 1 - - root -
AXIS 240Q 16 4.20, 4.30,
4.40 4 JPEG
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 � - root
Axis Special Events (B
and V) requires 4.40 or
higher.
AXIS 241Q 16
4.01, 4.02
4.03, 4.20,
4.30, 4.40
4 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 � - root
MPEG4 support requires
firmware 4.20 or higher.
Axis Special Events (B
and V) requires 4.40 or
higher.
AXIS 241QA 16 4.20, 4.30 4 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (B
and V) requires 4.30 or
higher.
AXIS 241S 17
4.01, 4.02
4.03, 4.20,
4.30 1
JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 � - root
Axis Special Events (B
and V) requires 4.30 or
higher.
AXIS 241SA 17 4.21, 4.30 1 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (B
and V) requires 4.30 or
higher.
Axis 242S IV 17 4.31 1 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, V)
Alert
Port �
Type
1 & 2 � - root
Intelligent Video is not
supported.
23 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 243Q 160 4.41, 4.45 4 JPEG
MPEG4
4 / 4
(P)
(VMD)
(B, Ta,
V)
Alert
Port �
Type
1 & 2 � - root
Up to 12 Channels
supported with three
Axis 243Q blade servers
installed in Axis 291
Video Server Rack.
Older firmware no
longer supported.
AXIS 243SA 17 4.40, 4.41,
4.45 1
JPEG
MPEG4
4 / 4
(P)
(VMD)
(A, B, V)
Alert
Port �
Type
1 & 2 �
Two-
Way root
Axis Special Events (A,
B and V) requires 4.41
or higher.
AXIS 247S 172 4.40, 4.42 1 JPEG
MPEG4
1 / 1
(P)
(VMD)
(A, B, V)
Alert
Port - - -
One-
Way root
Axis Special Events (A,
B and V) requires 4.42
or higher.
AXIS 282 130 4.30 1 JPEG
MPEG4 2 / 2
Alert
Port �
Type
1 & 2 � - root -
AXIS 2100 5
2.32, 2.33
2.34, 2.40
2.43
1 JPEG 1 / 1 FTP - - -
One-
Way
AXIS
2191
root -
AXIS 2110 5
2.32, 2.33
2.34 2.40,
2.43
1 JPEG 1 / 1 FTP - - -
One-
Way
AXIS
2191
root -
AXIS 2120 6
2.32, 2.33
2.34 2.40
2.43
1 JPEG 1 / 1 FTP - - -
One-
Way
AXIS
2191
root -
AXIS 2130 12 2.32, 2.34
2.40, 2.43 1 JPEG 1 / 1 FTP �
Type
1 & 2 - - root -
24 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
AXIS 2400 OSYS 3 1.12, 1.15 4 JPEG 4 / 1 Alert
port � Type 1 - - root -
AXIS 2400 Linux 8 2.32, 2.33
2.34, 2.40 4 JPEG 4 / 1
Alert
Port �
Type
1 & 2 -
One-
Way
AXIS
2191
root -
AXIS 2400+ 8
3.01, 3.02
3.10, 3.11,
3.13
4 JPEG 4 / 1 Alert
Port �
Type
1 & 2 -
One-
Way
AXIS
2191
root
The resolutions
176x112/176x144 are
not supported.
AXIS 2401 OSYS 4 1.01, 1.15 1 JPEG 4 / 1 Alert
port � Type 1 - - root -
AXIS 2401 Linux 11 2.32, 2.33
2.34, 2.40 1 JPEG 4 / 1
Alert
Port �
Type
1 & 2 -
One-
Way
AXIS
2191
root -
AXIS 2401+ 11 3.01, 3.02
3.10, 3.11 1 JPEG 4 / 1
Alert
Port �
Type
1 & 2 -
One-
Way
AXIS
2191
root
The resolutions
176x112/176x144 are
not supported.
AXIS 2411 14 3.02, 3.04
3.10, 3.13 1 JPEG 0 / 0 - - - - - root
The resolutions
176x112/176x144 and
704x240/704x288 are
not supported.
AXIS 2420 10 2.12 1 JPEG 0 / 0 - � - - - root -
AXIS 2420 10
2.32, 2.33
2.34, 2.40
2.43
1 JPEG 1 / 1 FTP � - -
One-
Way
AXIS
2191
root -
25 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis M1011 283 5.00 1
JPEG
MPEG4
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M1031 284 5.00 1
JPEG
MPEG4
H.264
0 / 0
(P)
(VMD)
(A, B, Ta,
Te)
Alert
Port - - -
Two-
Way root -
Axis M1054 441 5.15.1 1 JPEG
H.264
2 / 1
(P)
(VMD)
Alert
Port - - -
Two-
Way root
Input 2 is the PIR
sensor.
Axis M1103 283 5.08 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M1104 283 5.08 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M1113 283 5.08 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M1114 283 5.08 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M3011 285 5.01 1
JPEG
MPEG4
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
26 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis M3014 342 5.05 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M3113-R 342 5.11.1 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M3113-VE 342 5.21 1 JPEG H.264
0 / 0 (P)
(VMD)
(B, Ta)
Alert Port
- - - - root -
Axis M3114-R 342 5.11.1 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M3114-VE 342 5.21 1 JPEG H.264
0 / 0 (P)
(VMD) (B, Ta)
Alert Port
- - - - root -
Axis M3203 342 5.11 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
Axis M3204 342 5.11 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, Ta)
Alert
Port - - - - root -
27 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis M5013 496 5.25 1 JPEG H.264
0 / 0 (P)
(VMD) (A, B, Te)
Alert Port
���� Type 1 & 2
���� One-Way
root -
Axis M5014 496 5.25 1 JPEG H.264
0 / 0
(P) (VMD) (A, B, Te)
Alert Port
���� Type 1 & 2
���� One-Way
root -
Axis M7001 286 5.01 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B, V)
Alert
Port � Type 2 � - root -
Axis P1311 288 5.01 1
JPEG
MPEG4
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
One-
Way root -
Axis P1343 288 5.06 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root -
Axis P1344 288 5.06 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root -
28 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis P1346 288 5.06 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root -
Axis P1347 437 5.11 8 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root
You need to enable
AreaView and define
areas on device
homepage.
Axis P3301 246 5.01, 5.11 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B, C,
Ta)
Alert
Port - - -
One-
Way root
Added TCP support in
DP 3.9
Axis P3304 246 5.11 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
One-
Way root -
Axis P3343 339 5.05,
5.20.2 1
JPEG
H.264
1 / 1
(P)
(VMD)
(A, B, C, Ta)
Alert
Port - - -
One-
Way root -
Axis P3344 339 5.05, 5.07,
5.20.2 1
JPEG
H.264
1 / 1
(P)
(VMD)
(A, B, C, Ta)
Alert
Port - - -
Two-
Way root
Two-Way Audio
supported from
firmware 5.07.
29 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis P3346 437 5.20 8 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root
You need to enable
AreaView and define
areas on device
homepage.
Axis P3346-E 437 5.20 8 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port - - -
Two-
Way root
You need to enable
AreaView and define
areas on device
homepage.
Axis P5512 373 5.25 1 JPEG H.264
2 / 2
(P) (VMD) (A, B, Te)
Alert Port
���� Type 1 & 2
���� Two-Way
root -
Axis P5512-E 373 5.25 1 JPEG H.264
2 / 2 (P)
(VMD) (A, B, Te)
Alert Port
���� Type 1 & 2
���� Two-Way
root -
Axis P5522 373 5.25 1 JPEG H.264
2 / 2 (P)
(VMD)
(A, B, Te)
Alert Port
���� Type 1 & 2
���� Two-Way
root -
Axis P5522-E 373 5.25 1 JPEG H.264
2 / 2 (P)
(VMD)
(A, B, Te)
Alert Port
���� Type 1 & 2
���� Two-Way
root -
30 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis P5532 373 5.15 1 JPEG
H.264
2 / 2
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root -
Axis P5532-E 373 5.20 1 JPEG
H.264
0 / 0
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 � - root -
Axis P5534 373 5.15 1 JPEG
H.264
2 / 2
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root -
Axis P5534-E 373 5.20 1 JPEG
H.264
0 / 0
(P)
(VMD)
(A, B,
Te)
Alert
Port �
Type
1 & 2 � - root -
Axis P8221 389 5.10 0 - 4 / 4
(P)
Alert
Port - - -
Two-
Way root
Require a DLK like all
other devices.
Axis Q1755 278 5.02 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B, Ta,
Te)
Alert
Port �
Type
2 �
One-
Way root
Setup with Axis PT foot
YP3040.
Axis Q1910 380 5.08 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port � Type 2 �
One-
Way root
Setup as video server
with Axis PT foot
YP3040.
31 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis Q1921 380 5.11 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port � Type 2 �
One-
Way root
Setup as video server
with Axis PT foot
YP3040.
Axis Q1921-E 380 5.11 1 JPEG
H.264
1 / 1
(P)
(VMD)
(A, B,
Ta)
Alert
Port � Type 2 �
One-
Way root
Setup as video server
with Axis PT foot
YP3040.
Axis Q6032-E 335 5.06 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B)
Alert
Port �
Type
1 & 2 �
One-
Way root -
Axis Q6034 440 5.15 1 JPEG
H.264
2 / 2
(P)
(VMD)
(B, Te)
Alert
Port �
Type
1 & 2 �
Two-
Way root -
Axis Q6034-E 335 5.20 1 JPEG
H.264
0 / 0
(P)
(VMD)
(B)
Alert
Port �
Type
1 & 2 � - root -
Axis Q6035 440 5.25 1 JPEG H.264
2 / 2 (P)
(VMD) (B, Te)
Alert Port
���� Type 1 & 2
���� Two-Way
root -
Axis Q6035-E 335 5.25 1 JPEG H.264
0 / 0
(P) (VMD) (B)
Alert Port
���� Type 1 & 2
���� - root -
32 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Axis Q7401 256 5.01 1 JPEG
H.264
2 / 26
(P)
(VMD)
(A, B,
Ta)
Alert
Port �
Type
2 �
One-
Way root -
Axis Q7404 337 5.02 4 JPEG
H.264
4 / 46
(P)
(VMD)
(A, B, Ta,
Te, V)
Alert
Port �
Type
2 �
One-
Way root
Audio only on first
channel.
Axis Q7406 268 5.01 6 JPEG
H.264
6 / 66
(P)
(VMD)
(B, Ta,
V)
Alert
Port �
Type
2 � - root -
Axis Q7414 337 5.25 4 JPEG H.264
4 / 46 (P)
(VMD) (A, B, Ta, Te, V)
Alert Port
���� Type 2
���� One-Way
root -
Barix Annuncicom
100
494 VB0.36 0 - 2 / 1 Notification
- - - Two-Way
- Require a DLK like all
other devices.
Barix Barionet 272 V02.26 0 - 200 /
200 Poll - - - - -
Require a DLK like all
other devices.
Barix
Exstreamer 100
497 VA0.36 0 - 0 / 0 - - - - Out - Require a DLK like all
other devices.
33 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Basler BIP-640c 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
H.264 supported from
firmware Bip-1.3-1
Basler BIP-640c-
dn 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer. H.264
supported from
firmware Bip-1.3-1
Basler BIP-1000c 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
H.264 supported from
firmware Bip-1.3-1
Basler BIP-
1000c-dn 242
Bip-1.0-7,
Bip-1.3-1 1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer. H.264
supported from
firmware Bip-1.3-1
Basler BIP-1300c 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
H.264 supported from
firmware Bip-1.3-1
34 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Basler BIP-
1300c-dn 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer. H.264
supported from
firmware Bip-1.3-1
Basler BIP-1600c 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
H.264 supported from
firmware Bip-1.3-1
Basler BIP-
1600c-dn 242
Bip-1.0-7,
Bip-1.3-1,
Bip-1.4-2
1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer. H.264
supported from
firmware Bip-1.3-1
Basler BIP-
D1000c-dn 242 Bip-1.6-1 1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer.
Basler BIP-
D1300c-dn 242 Bip-1.6-1 1
JPEG
MPEG4
H.264
1 / 1 SMTP � Type
3 - - root
Can control a PTZ
device through
transparent protocols.
Tested by camera
manufacturer.
Baxall X-Stream 91 1.00 4 JPEG 4 / 4
Alert
Port �
Type
1 & 2 � - root -
35 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Black BLK-
IPD101 525
1.06.03,
1.06.04 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(AN, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
Black BLK-
IPD102 525
1.06.03,
1.06.04 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(AN, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
Black BLK-
IPE101 525 1.06.03 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(An, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage.
Black BLK-
IPS101 525
1.06.03,
1.06.04 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(AN, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
Black BLK-
IPS102M 525
1.06.03,
1.06.04 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(AN, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
Bosch Autodome
Easy II IP 402 4.10 1
JPEG
H.264 0 / 0 - - - - - service
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
Bosch Dinion
NWC-0455- 10P 133
125001500
103,
585002000
105,
43500400
1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher. H.264
supported from
firmware 43500400.
Only 1 Event (Input and
VMD) can be setup at
any given time.
36 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Bosch Dinion
NWC-0495-10P 133
125001500
103,
585002000
105,
43500400
1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher. H.264
supported from
firmware 43500400.
Only 1 Event (Input and
VMD) can be setup at
any given time.
Bosch FlexiDome
NWD-0455 133
425002500
10D 1
JPEG
MPEG4
0 / 0
(VMD) - - - - - service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher.
Bosch FlexiDome
NWD-0455 402 4.10 1
JPEG
H.264 0 / 0 - - - - - service
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
Bosch FlexiDome
NWD-0495 133
425002500
10D 1
JPEG
MPEG4
0 / 0
(VMD) - - - - - service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher.
Bosch Extreme
NEI-828 190 19500410 1
JPEG
MPEG4
H.264
0 / 0
(VMD) SMTP - - - - service -
Bosch NBC-200
series 402 39500410 1
JPEG
MPEG4
H.264
0 / 0 - � Type 2 � One-
Way -
Via ONVIF Conformant
driver. ONVIF will not
work through a NAT
router. Tested by
camera manufacturer.
37 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Bosch NBN-498-
11P 402 4.10 1
JPEG
H.264 0 / 1 - - - -
One-
Way service
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
Bosch NBN-832V-P
602 36500500 1 JPEG H.264
2 / 1 (VMD) (Ta)
Poll - - - Two-Way
service Tested by design
using NDN-832V03-P
Bosch NBN-921-2P
602 10500453 1 JPEG H.264
2 / 1 (VMD)
(Ta)
Poll ���� Type 3 ���� Two-Way
service -
Bosch NDN-
921-2P 602 10500453 1
JPEG
H.264
2 / 1 (VMD) (Ta)
Poll ���� Type 3 ���� Two-
Way service
Tested by design
using NBN-921-2P
Bosch NDN-832V03-P
602 36500500 1 JPEG H.264
2 / 1
(VMD) (Ta)
Poll - - - Two-Way
service -
Bosch VG4 Series 190
58500200,
19500300,
19500410 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � - service
H.264 supported from
19500410. Hardware ID
F0002Exx supported
through ONVIF.
Bosch Autodome 800
Series 601 9500453 1
JPEG
H.264
2 / 1 (VMD) (Ta)
Poll ���� Type 3 ���� Two-
Way service -
38 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Bosch VideoJet
X10 253
8500350,
19500410 1
JPEG
MPEG4
H.264
1 / 4
(VMD)
(V)
SMTP � Type 3 � Two-
Way service
Only support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. H.264
supported from
19500410. All 4 Inputs
can be used but only 1
Event (Input, VMD and
V) can be setup at any
given time.
Bosch VideoJet
X20 253
8500350,
19500410 2
JPEG
MPEG4
H.264
1 / 4
(VMD)
(V)
SMTP � Type 3 � Two-
Way service
Only support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. H.264
supported from
19500410. All 4 Inputs
can be used but only 1
Event (Input, VMD and
V) can be setup at any
given time.
Bosch VideoJet
X40 253
8500350,
19500410 4
JPEG
MPEG4
H.264
1 / 4
(VMD)
(V)
SMTP � Type 3 � Two-
Way service
Only support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. H.264
supported from
19500410. All 4 Inputs
can be used but only 1
Event (Input, VMD and
V) can be setup at any
given time.
39 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Bosch VIP X1 127
00500150,
50500200,
41500250,
05500253
1 JPEG
MPEG4 1 / 1 SMTP � Type 3 �
Two-
Way service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher. Only
support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. All 4 Inputs
can be used but only 1
Input can be setup at
any given time.
Bosch VIP X2 132
00500150,
50500200,
41500250,
05500253
2 JPEG
MPEG4 1 / 1 SMTP � Type 3 �
Two-
Way service
4CIF/D1 resolutions
supported in XPE 6.0b
and higher. Only
support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. All 4 Inputs
can be used but only 1
Input can be setup at
any given time. Only
support for 1 Audio
channel.
40 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Bosch VIP X1600
M4SA 162
29500200,
41500250,
19500410
16
JPEG
MPEG4
H.264
4 / 16 SMTP � Type 3 � One-
Way service
Device is added as 4
modules with 4 channels
each.
4CIF/D1 resolutions
only supported in XPE
6.0b and higher. Only
support for PTZ
camera using Bosch,
Pelco-P, Pelco-D or
Panasonic CS850
protocol. H.264
supported from
19500410. All 16 Inputs
can be used but only 1
Input per module can be
setup at any given time.
Only support for 1 Audio
channel per module.
Bosch VIP X1600
XFM4 455 14500420 16
JPEG
H.264
16 / 4
(VMD)
(Ta, V)
Poll � Type 3 � Two-
Way service
Device is added as 4
modules with 4 channels
each.
704x576 is not
supported in H.264.
Brickcom CB-
100Ae 450
3.0.1.2,
3.0.6.28 1
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - -
One-
Way admin
H.264 supported from
firmware 3.0.6.28
Brickcom CB-
100Ap 450
3.0.1.2,
3.0.6.28 1
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - -
Two-
Way admin -
41 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Brickcom FB-
100Ae 450
3.0.1.2,
3.0.6.27 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin
H.264 supported from
firmware 3.0.6.27
Brickcom FB-
100Ap 450
3.0.1.2,
3.0.6.27 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Brickcom FD-
100Ae 450
3.0.1.2,
3.0.6.27 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin
H.264 supported from
firmware 3.0.6.27
Brickcom FD-
100Ap 450
3.0.1.2,
3.0.6.26 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Brickcom WCB-
100Ae 450
3.0.1.2,
3.0.6.28 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
One-
Way admin
H.264 supported from
firmware 3.0.6.28
Brickcom WCB-
100Ap 450
3.0.1.2,
3.0.6.28 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Brickcom WFB-
100Ae 450 3.0.1.2 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way admin
Tested by camera
manufacturer.
Brickcom WFB-
100Ap 450
3.0.1.2,
3.0.6.27 1
JPEG
MPEG4
H.264
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Canon VB-C10 31 1.0 rev.15 1 JPEG 0 / 0 - � Type 1 - - root -
Canon VB-C50FSi 212 1.2 Rev 77 1 JPEG 2 / 2
(OD) - - - -
Two-
Way root -
Canon VB-C50i 212 1.0 rev.21,
1.2 Rev 77 1 JPEG
2 / 2
(OD) - � Type 1 -
Two-
Way root -
Canon VB-C50iR 212 1.2 Rev 77 1 JPEG 2 / 2
(OD) - � Type 1 -
Two-
Way root -
42 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Canon VB-C60 276 1.0.0, 1.10 1 JPEG
MPEG4
2 / 2
(OD) Poll � Type 1 -
Two-
Way root -
Canon VB-C300 174 0.5 Rev.4,
1.1 Rev.0 1 JPEG 2 / 1 - � Type 1 -
Two-
Way root -
Canon VB-C500D 330 1.0.0, 1.1.0 1 JPEG
MPEG4
2 / 2
(OD) Poll - - -
Two-
Way root -
Canon VB-
C500VD 330 1.0.0, 1.1.0 1
JPEG
MPEG4
2 / 2
(OD) Poll - - -
Two-
Way root -
Canon VB-M40 477 1.0.0 1 JPEG
H.264 2 / 2 Poll �
Type 1
& 2 �
Two-
Way root
CBC Ganz ZA-
NVE12K 483
1.5.686.163
60 4
JPEG
MPEG4
4 / 4
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root -
CBC Ganz ZN-
D2024 207 0100c 1 MPEG4 0 / 0 - - - - - root -
CBC Ganz ZN-
NH21VPE 481 1.02.03 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(An, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage.
CBC Ganz ZN-
PT304L 179 0100c 1 MPEG4 0 / 0 - � Type 2 - - root -
CBC Ganz ZN-
PT304WL 179 0100b 1 MPEG4 0 / 0 - � Type 2 - - root -
CBC Ganz ZN-
PTZ500VPE 480 1.06.04 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage.
CBC Ganz ZN-
RS4000 R12/R40 482 1.02.04 1
JPEG
MPEG4
H.264
0 / 2
(VMD)
(An, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage.
Checkview
9128702 275 B3.0/202 1 JPEG 0 / 0 - - - - - root -
43 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Cisco IPC-2500 322 2.1.0 1 JPEG
MPEG4 0 / 2 - - - - - admin -
Cisco IPC-4300 322 1.0.1 1 JPEG
H.264 0 / 2 - - - -
One-
Way admin -
Cisco IPC-4500 322 1.0.1 1 JPEG
H.264 0 / 2 - - - -
One-
Way admin
CNB IDC4000T 395 XNET.T1-
1.0.10.0414 1
JPEG
MPEG4
1 / 1
(VMD) TCP - - -
Two-
Way root -
CNB IDP4000VD 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
CNB IDP4000VR 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
CNB IDP4030VR 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
CNB IGP1030 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
CNB INS2000 393 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP � Type 2 �
Two-
Way root -
CNB IPM3063P 388 XPDN.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
4 / 2
(VMD) SMTP � Type 2 �
Two-
Way root -
CNB ISM1063P 388 XPDN.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
4 / 0
(VMD) SMTP � Type 2 �
Two-
Way root -
44 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
CNB ISS2766PW 388 XPDN.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
4 / 2
(VMD) SMTP � Type 2 �
Two-
Way root -
CNB IVP4000VR 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
CNB IVP4030VR 391 XNET.A1-
1.1.10.304 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way root -
Cobham
NetNode-P-
228255
490 V3.0 1 MPEG4 0 / 0 - � Type 1
or 2 � - - -
Convision S1 21 4.3.3, 4.4.0 1 JPEG 2 / 0 SMTP � Type
1 & 2 - - admin -
Convision V100 21 4.3.3, 4.4.0 1 JPEG 2 / 0 SMTP � Type
1 & 2 - - admin -
Convision V200 20 4.3.3, 4.4.0 2 JPEG 2 / 0 SMTP � Type
1 & 2 - - admin -
Convision V6xx 7 5.4.2, 6.20 6 JPEG 6 / 2 SMTP � Type
1 & 2 - - admin -
Convision V7xx 7 5.4.2 6 JPEG 6 / 2 SMTP � Type
1 & 2 - - admin -
D-Link
DCS1000/1000W 55 1.27, 1.30 1 JPEG 0 / 0 - - - - - root -
D-Link DCS-2000 101 1.08 1 MPEG4 0 / 0 - - - - - admin Requires H.263 support.
D-Link DCS-
2100+ / 2100 /
2100G
101 1.06 1 MPEG4 0 / 0 - - - - - admin Requires H.263 support.
D-Link DCS-3110 386 1.00 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - - - admin -
45 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
D-Link DCS-3220
/ 3220G 118 1.02 1 MPEG4 0 / 0 - - - - - admin -
D-Link DCS-3410 524 1.02 1 MPEG4 2 / 1
(VMD) TCP - - - - admin -
D-Link DCS-3411 486 1.02 1
JPEG
MPEG4
H.264
2 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
D-Link DCS-3415 387 1.00 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 2 � - admin
Device supports zoom
only.
D-Link DCS-3430
486 1.00 1 JPEG MPEG4 H.264
2 / 1 (VMD)
Notification
- - - Two-Way
admin Tested by camera manufacturer.
D-Link DCS-5300 99 1.02, 1.03 1 MPEG4 0 / 0 - � Type 2 - - admin Requires H.263 support.
D-Link DCS-
5300G 99
1.02, 1.03
1.04 1 MPEG4 0 / 0 - � Type 2 - - admin Requires H.263 support.
D-Link DCS-5605 492 1.02 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion �
Type 1
& 2 �
Two-
Way admin -
D-Link DCS-5610 387 1.00 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 2 � - admin -
D-Link DCS-5635
492 1.01 1 JPEG MPEG4 H.264
1 / 1 (VMD)
Notification
���� Type 1 & 2
���� Two-Way
admin Tested by camera manufacturer.
D-Link DCS-6110 386 1.00 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - - - admin -
D-Link DCS-6511 402 1.00.04 1
JPEG
MPEG4
H.264
0 / 0 - - - - - service
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
46 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
D-Link DCS-6620
/ 6620G 116 1.01 1 MPEG4 0 / 0 - � Type 2 - - admin -
D-Link DCS-7510 486 1.02 1 JPEG
MPEG4
2 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
Darim Vision
PVE400 298 1676 1 MPEG4 0 / 0 - - - -
One-
way admin
Port 8080 reserved by
manufacturer.
Dedicated Micros
Digital Sprite 2 247 4.0 16 JPEG 0 / 0 - - - - - dm
DVR. Only 1st
generation hardware
supported.
Digimerge
DNB6320 177 2.43 1 MPEG4 0 / 0 - - - - - admin -
Digimerge
DND7220 177 2.43 1 MPEG4 0 / 0 - - - - - admin -
Digimerge
DNP5220E 177 2.43 1 MPEG4 0 / 0 - - - - - admin -
Digimerge
DNP5320E 177 2.43 1 MPEG4 0 / 0 - - - - - admin -
Digimerge
DNS1010 177 2.30, 2.43 1 MPEG4 0 / 0 - � Type 2 - - admin -
Digimerge DNZ-
9320W 244 2.52 1 MPEG4 1 / 0
Alert
Port � Type 2 - - admin -
DirectShow
camera 214 - 8 JPEG 0 / 0 - - - -
One-
Way -
To setup DirectShow
cameras see under
Remarks.
Discrete DIV2300 188 2.62 1 JPEG
MPEG4 2 / 1 SMTP � Type 3 -
One-
Way Root -
DvTel DVT-7101 262 4.62d 1 MPEG4 0 / 0 - � Type 3 - One-
Way admin Tested by partner.
DvTel DVT-7601 464 4.2 1 MPEG4 0 / 0 - � Type 3 - One-
Way admin Tested by partner.
47 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
DvTel DVT-7608 261 4.60v 8 MPEG4 0 / 0 - � Type 3 - One-
Way admin Tested by partner.
DvTel DVT-7612E 371 4.60q 12 MPEG4 0 / 0 - � 1 Type 3 � - admin
PTZ support for Pelco-D,
Pelco-P & JVC TK-C655
Dome PTZ Camera.
Tested by partner.
DvTel DVT-9460 514 4.62d 1 MPEG4 0 / 0 - � Type 3 - One-
Way admin -
DvTel DVT-
9540DW 514 4.40l 1 MPEG4 0 / 0 - - - - - admin Tested by partner.
Dynacolor Diva
Standard 296
s20090505
NS,
d20091007
NS,
s20090803
NS
1 JPEG
MPEG4
1 / 1
(VMD)
(Ta)
SMTP - - - Two-
Way Admin -
Dynacolor Diva
Zoom 282
s20090505
NS,
s20090805
NS
1 JPEG
MPEG4
1 / 1
(VMD) SMTP � - -
Two-
Way Admin -
Dynacolor Diva
Mini 297
s20090505
NS,
s20090803
NS
1 JPEG
MPEG4
0 / 0
(VMD)
(Ta)
SMTP - - - One-
Way Admin -
ElsagDatamat VISIP 2
332 1.0.2.1 1 H.264 1 / 1 (VMD)
(Ta, V)
Notification
���� Type 2 ���� - admin -
Etrovision
EV3130A 236 2.4.5 1 MPEG4
1 / 1
(VMD)
(B, V)
SMTP � Type 3 � One-
Way root
I/O will only work with
XPE 6.5d or newer.
48 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Etrovision
EV3131 237 2.4.5 1 MPEG4
1 / 1
(VMD)
(B, V)
SMTP � Type 3 � - root I/O will only work with
XPE 6.5d or newer.
Etrovision
EV3131A 237 2.4.5 1 MPEG4
1 / 1
(VMD)
(B, V)
SMTP � Type 3 � One-
Way root
I/O will only work with
XPE 6.5d or newer.
Etrovision
EV3151A 443 2.0.0 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion � Type 3 �
One-
Way root -
Etrovision
EV3830 238 2.4.5 1 MPEG4
1 / 1
(VMD)
(B, V)
SMTP - - - - root I/O will only work with
XPE 6.5d or newer.
Etrovision
EV6130 239 2.4.5 1 MPEG4
0 / 0
(VMD)
(B, V)
SMTP - - - - root I/O will only work with
XPE 6.5d or newer.
Etrovision
EV6150A 443 2.0.0 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion � Type 3 �
One-
Way root -
Etrovision
EV6230 240 2.4.5 1 MPEG4
1 / 1
(VMD)
(B, V)
SMTP � Type 3 � - root I/O will only work with
XPE 6.5d or newer.
Etrovision
EV6250A 443 2.0.0 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion � Type 3 �
One-
Way root -
Etrovision
EV6530 240 2.4.5 1 MPEG4
0 / 0
(VMD)
(B, V)
SMTP - - - - root I/O will only work with
XPE 6.5d or newer.
Etrovision
EV8150A 443 2.0.0 1
JPEG
H.264
1 / 1
(VMD)
Notificat
ion � Type 3 �
One-
Way root -
Everfocus
EAN800 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 Tested by manufacturer.
49 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Everfocus
EAN850 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 -
Everfocus
EAN890 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 Tested by manufacturer.
Everfocus
EDN800 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 Tested by manufacturer.
Everfocus
EDN850 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 Tested by manufacturer.
Everfocus
EDN890 362 1.1.43 1 H.264
1 / 1
(VMD) SMTP - - -
One-
Way user1 Tested by manufacturer.
Everfocus
EPN3100 363 1.0.0 1 H.264
4 / 2
(VMD) SMTP � Type 3 �
One-
Way user1 Tested by manufacturer.
Everfocus
EPN3600 363 1.0.0 1 H.264
4 / 2
(VMD) SMTP � Type 3 �
One-
Way user1 -
Everfocus
EZN850 394 1.1.44 1 H.264
1 / 1
(VMD) SMTP � - -
One-
Way user1 Tested by manufacturer.
Extreme CCTV
EX7 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
Extreme CCTV
EX30 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
Extreme CCTV
EX36 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
Extreme CCTV
EX80 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
Extreme CCTV
EX82 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
Extreme CCTV
EX85 140 62904 1 JPEG 0 / 0 - - - - - admin -
Extreme CCTV
REG-L1-IP 103 4.62d 1 MPEG4 0 / 0 - - - - - admin -
50 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Eyeview CMI-110 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview CMI-
H230 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview CMI-
H260 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview EYENET-
250A 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview
GPOWER IP
Basement
245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPM-100 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPM-150 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPM-300 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPM-500 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPR-220 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
51 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Eyeview IPR-330 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPR-
6000 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPR-
6600 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-110 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-220 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-300 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-330 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-400 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-500 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-600 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
52 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Eyeview IPS-800 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-830 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
Eyeview IPS-900 245 2.4.9 1 MPEG4
1 /1
(VMD)
(B, V)
SMTP � Type 3 � - root -
FLIR 241S 95 4.01, 4.02
4.03, 4.20 1 JPEG 10 / 4
Alert
Port - - - - root
Combined FLIR A-Series
and AXIS 241S device.
Auto detect device is
not working – device
must be selected
manually
GE Security GEC-
IP2B 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2B-C 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2B-P 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2D 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2D-C 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2D-P 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2VD 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2VD-C 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
53 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
GE Security GEC-
IP2VD-P 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2VD-DN 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2VD-DNC 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
GE Security GEC-
IP2VD-DNP 225 0.50E1 1
JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
Grandeye
Halocam IPC 249 0.39.14 5 JPEG
1 / 1
(VMD) SMTP � Type 1 - - admin
One camera license will
cover all five lenses.
Grandeye
Halocam IPW 249 0.39.14 5 JPEG
1 / 1
(VMD) SMTP � Type 1 - - admin
One camera license will
cover all five lenses.
HikVision DS-
2CD702P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD702P(N)-FB 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD712P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD712P(N)-FB 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD732P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD732P(N)-FB 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
54 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
HikVision DS-
2CD752MF-E 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD752MF-FB 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD762MF 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD762MF-E 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD792P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD792P(N)F-FB 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD802P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD802P(N)F-E 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD812P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD812P(N)F-E 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
55 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
HikVision DS-
2CD832P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD832P(N)F-E 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD852MF-E 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin -
HikVision DS-2CD853F-E
458 V3.0
(110516) 1
JPEG
MPEG4 H.264
4 / 3 (VMD)
Notification
���� Type 1 or 3
���� Two-Way
admin -
HikVision DS-
2CD862MF-E 519
V2.0
(090608) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD892P(N)F 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD892P(N)F-E 519
V2.0
(090522) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD7133-E 457
V3.0
(110117) 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - - - admin -
HikVision DS-
2CD7153-E 457
V3.0
(110117) 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - - - admin
Tested by camera
manufacturer.
HikVision DS-
2CD8133F-E 457
V3.0
(110117) 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - -
Two-
Way admin
Tested by camera
manufacturer.
HikVision DS-
2CD8153F-E 457
V3.0
(110117) 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - -
Two-
Way admin
Tested by camera
manufacturer.
56 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
HikVision DS-
2DF1-601H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-602H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-603H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-604H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-605H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-607H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-611H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin -
HikVision DS-
2DF1-612H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-613H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-614H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
57 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
HikVision DS-
2DF1-615H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision DS-
2DF1-617H 522
2.0
(091017) 1 H.264
2 / 2
(VMD)
(Ta, V)
Poll � Type 3 � One-
way admin
Tested by camera
manufacturer.
HikVision
DS6101 277
V2.0
(090522) 1 H.264
1 / 1 3
(VMD)
(Ta, V)
Poll � Type 3 � Two-
Way admin
Audio Line in is not
supported - BNC audio-
connector supported.
HikVision
DS6104 273
V2.0
(090522) 4 H.264
4 / 4 3
(VMD)
(Ta, V)
Poll � Type 3 � Two-
Way admin
Audio Line in is not
supported - BNC audio-
connector supported.
Hitron
HECMC4V4C4 217 4.1.3-28 1 MPEG4
2 / 1
(VMD) SMTP - - -
One-
Way admin -
Hitron HEV0104 223 4.1.2-40 1 MPEG4 2 / 1
(VMD) SMTP � Type 3 -
One-
Way admin -
Hitron HEV0407 224 4.1.2-40 4 MPEG4 2 / 1
(VMD) SMTP - - -
One-
Way admin -
Hitron HNCA-
811-NZ1 222 4.1.2-40 1 MPEG4
0 / 0
(VMD) SMTP � Type 2
One-
Way admin -
Hitron HNCB-
811NZ1 219 4.1.2-40 1 MPEG4
0 / 0
(VMD) SMTP � Type 2
One-
Way admin -
Hitron HNCB-
F1SN 218 4.1.2-40 1 MPEG4
0 / 0
(VMD) SMTP - - -
One-
Way admin -
Hitron HNCG-
F1SAW0S4 220 4.1.2-40 1 MPEG4
0 / 0
(VMD) SMTP - - -
One-
Way admin -
Hitron HNCV-
811PZ0S4 221 4.1.2-40 1 MPEG4
0 / 0
(VMD) SMTP � Type 3 -
One-
Way admin -
Hitron HWD-
12SMP 187 4.1.2-40 1 MPEG4
2 / 1
(VMD) SMTP � Type 3 -
One-
Way admin -
58 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Honeywell
ACUIXIP 350 1.4.9 1 MPEG4
0 / 0
(Ta) Poll �
5 Type 3 � - admin -
Honeywell
Galaxy
Dimension 520
444 6.50 0 - 512 /
256
Notificat
ion - - - - - -
Honeywell
HCS554IP 336 5.4.0 1 MPEG4
1 / 1
(Ta) Poll - - -
Two-
Way admin -
Honeywell
HCD554IP 336 5.4.0 1 MPEG4
1 / 1
(Ta) Poll - - -
Two-
Way admin -
Honeywell
HCX13M 364 2.8/6 1 JPEG
1 / 1
(VMD) Poll - - - - root -
Honeywell HCX3 364 2.8/6 1 JPEG 1 / 1
(VMD) Poll - - - - root -
Honeywell
HCX5D 364 2.8/6 1 JPEG
1 / 1
(VMD) Poll - - - - root -
Honeywell
HD3MDIP 390 7.0.6 1
JPEG
MPEG4
1 / 1
(Ta) Poll - - - - admin
Older firmware no
longer supported.
Honeywell
HD3MDIPX 390 7.0.6 1
JPEG
MPEG4
1 / 1
(Ta) Poll - - - - admin
Older firmware no
longer supported.
Honeywell
HD4DIP 336 4.4.1 1 MPEG4
1 / 1
(Ta) Poll - - -
Two-
Way admin -
Honeywell
HD4MDIP 390 8.0.3 1
JPEG
MPEG4
1 / 1
(Ta) Poll - - - - admin -
Honeywell
HD4MDIPX 390 8.0.3 1
JPEG
MPEG4
1 / 1
(Ta) Poll - - - - admin -
Honeywell
HNVE1 431 6.3.2 1 MPEG4
1 / 1
(Ta) Poll � Type 3 �
Two-
Way admin -
Hunt HLC-1NAD 270 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
59 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Hunt HLC-1NAG 200 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-7RAD 270 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-7RAG 200 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-7RI 200 3.2.58 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin -
Hunt HLC-15M 202 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - admin -
Hunt HLC-15V 203 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - admin -
Hunt HLC-79AD 270 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-79AG 200 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-79G 203 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - admin -
Hunt HLC-79M 202 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - admin -
Hunt HLC-81AD 270 1.0.23 1 JPEG
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin -
Hunt HLC-81AG 200 1.0.23 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-81I 201 3.2.32 1 JPEG
MPEG4
2 / 2
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-81M 201 3.2.44 1 JPEG
MPEG4
2 / 2
(VMD) SMTP - - -
One-
way admin -
Hunt HLC-83M 202 3.2.32 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
60 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Hunt HLC-83V 203 3.2.32 1 MPEG4 0 / 0
(VMD) SMTP - - -
Two-
Way admin -
Hunt HLC-84AM 202 1.0.23 1
JPEG
MPEG4
H.264
0 / 0
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLC-84AV 203 1.0.23 1
JPEG
MPEG4
H.264
0 / 0
(VMD) SMTP - - -
Two-
Way admin -
Hunt HLC-84M 202 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - admin -
Hunt HLC-84V 203 3.2.58 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - -
Two-
Way admin -
Hunt HLT-86F 198 3.2.32 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 3 -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLT-87Z 209 3.2.32 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 3 -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLT-87ZA 209 1.0.23 1
JPEG
MPEG4
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLV-1CAD 270 1.08 1 JPEG
H.264
1 / 1
(VMD) SMTP - - - - admin
Tested by camera
manufacturer.
Hunt HLV-1CI 200 3.2.32 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HLV-1CM 270 3.2.32 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Hunt HLV-1WAG 200 1.0.23 1 MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HVT-01HT 199 3.2.20 1 JPEG
MPEG4
2 / 4
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
61 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Hunt HWS-01AD 204 3.2.58 1 JPEG
H.264
2 / 2
(VMD) SMTP � Type 3 - - admin -
Hunt HWS-01HD 204 3.2.32 1 JPEG
MPEG4
2 / 2
(VMD) SMTP � Type 3 -
Two-
Way admin
Output time is always 1-
2 seconds.
Hunt HWS-04AD 205 1.0.50 4
JPEG
MPEG4
H.264
4 / 4
(VMD) SMTP � Type 3 -
Two-
Way admin
Output time is always at
least 10 seconds.
Hunt HWS-
04HD/W 205 2.2.8 4
JPEG
MPEG4
4 / 4
(VMD) SMTP � Type 3 -
One-
Way admin
Output time is always at
least 10 seconds.
HWg-Juno 404 403 - 0 - 4 / 4 Poll - - - One-
Way -
Using the PSIA
Conformant device.
i3 Annexxus 301 392 2.0
(100322) 1 H.264
1 / 1
(VMD)
(Ta, V)
Poll - - - One-
Way admin Tested by manufacturer.
ICanServer 510 257 2.2.24 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanServer 512 257 2.2.24 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanServer 540 259 3.4.2 4 JPEG
MPEG4 4 / 2 Poll � Type 3 �
Two-
Way root -
ICanView 220 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanView 222 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanView 230 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
ICanView 232 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanView 240 257 2.2.24 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
62 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
ICanView 250 257 2.2.24 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root -
ICanView 260 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanView 270 257 2.2.24 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
ICanView 280 258 2.2.2 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
ICanView 290 257 2.2.24 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
IMT COFDM Rx 500 A04-D079-
WEBA4p6 1 H.264 0 / 0 - - - - - admin
Requires interlaced field-encoded H.264
support.
Infinova V1492N-
M series 381
1.04.35.201
00519 1
JPEG
MPEG4
2 / 2
(VMD) SMTP � Type 3 �
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Infinova V2500-
M series 435
1.04.35.201
00519 1
JPEG
MPEG4
2 / 1
(VMD) SMTP � Type 3 �
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Infinova V6100-
M series 435
1.04.35.201
00519 1
JPEG
MPEG4
2 / 1
(VMD) SMTP - - -
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Infinova V6200-
M series 434
1.04.45.201
00519 1
JPEG
MPEG4
2 / 2
(VMD) SMTP - - -
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Infinova V6600-
M series 435
1.04.35.201
00519 1
JPEG
MPEG4
2 / 1
(VMD) SMTP - - -
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Infinova V6800-
M series 435
1.04.35.201
00519 1
JPEG
MPEG4
2 / 1
(VMD) SMTP - - -
One-
Way INFINOVA
Audio must be enabled
on devicepage. Tested
by camera
manufacturer.
Infinova
V1700N-C series
NetDome
119 2.10 1 MPEG4 0 / 0 - � Type 2 - - service -
63 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Infinova V1700N-
L series NetDome 137 1.5 1 MPEG4 0 / 0 - � Type 3 - - infinova
Based on Infinovas new
interface.
Infinova V1700N-
M series 381
1.04.35.201
00519 1
JPEG
MPEG4
2 / 2
(VMD) SMTP � Type 3 �
One-
Way INFINOVA
Audio must be enabled
on devicepage.
Intellinet MNC-
L10 / 550710 104 4.11 1 JPEG 0 / 1 - - - - - admin -
IPIX
IS2000
CVD2000
CVN2000
57 R1710
hw1.1 1 JPEG 0 / 0 - - - - - admin -
IPIX CVD3000 57 R3294
hw1.1 1 JPEG 0 / 0 - - - - - admin -
Ipx DDK-1000 157 1.37 1 JPEG
MPEG4
0 / 0
(VMD) - - - -
One-
Way root
Tested by camera
manufacturer.
Ipx DDK-1500 157 1.37 1 JPEG
MPEG4
0 / 0
(VMD) - - - -
One-
Way root
Tested by camera
manufacturer.
Ipx DDK-1500D 157 1.37 1 JPEG
MPEG4
0 /0
(VMD) - - - -
One-
Way root
Tested by camera
manufacturer.
Ipx VE-3500 157 1.42 1 JPEG
MPEG4
0 / 0
(VMD) - - - -
One-
Way root
Tested by camera
manufacturer.
IQEye 101 83 2.4/2 1 JPEG 1 / 1
(VMD) Poll - - - - root -
IQEye 300 series 83
1.8.2,
B2.2/121,
2.41/1,
2.4/2,
2.6/2,
2.8/2, 2.8/6
1 JPEG 1 / 1
(VMD) Poll - - - - root
Only authentication
mode = ‘Basic’ is
supported.
IQEye 4 series 83 3.0/3, 3.0/6 1 JPEG 0 / 0
(VMD) Poll - - - - root -
64 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
IQEye 501 83
2.5/2,
2.5/5,
2.6/2,
2.8/2, 2.8/6
1 JPEG 0 / 0
(VMD) Poll - - - - root -
IQEye 510 83 2.8/1,
2.8/2, 2.8/6 1 JPEG
0 / 0
(VMD) Poll - - - - root -
IQEye 511 83 2.8/1,
2.8/2, 2.8/6 1 JPEG
0 / 0
(VMD) Poll - - - - root -
IQEye 600 series 83
2.3/1,
2.41/1,
2.4/2,
2.6/2, 2.7/3
1 JPEG 1 / 1
(VMD) Poll - - - - root
Only authentication
mode = ‘Basic’ is
supported.
65 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
IQEye 700 series 83
2.6/114,
2.6/2
2.7/3,
2.8/2,
2.8/6,
3.0/2, 3.0/4
1 JPEG 1 / 1
(VMD) Poll - - - - root -
IQEye 732 83 3.1/2, 3.2/4 1 JPEG
H.264
1 / 1
(VMD) Poll - - -
One-
Way root -
IQEye 800
Sentinel series 83
2.8/3,
2.8/6,
3.0/2, 3.0/4
1 JPEG 1 / 1
(VMD) Poll - - - - root -
IQEye 832 83 3.1/8 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - root -
IQEye Alliance
series 83
2.8/6,
3.0/2,
3.0/4, 3.0/7
1 JPEG
H.264
1 / 1
(VMD) Poll - - -
Two-
Way root
Audio supported on the
IQA3xx series.
IQEye Cameo 442 3.0/9 4 JPEG
H.264
1 / 1
(VMD) Poll - - - - root
H.264 only on Alliance
series. See under
remarks before
upgrading to Cameo
firmware.
IQEye IQA25 83 3.0/7 1 JPEG
H.264
1 / 1
(VMD) Poll - - - - root -
IQEye IQA33 83 3.3/2 1 JPEG H.264
1 / 1 (VMD)
Poll - - - Two-Way
root -
IQEye IQA35 83 3.3/2 1 JPEG H.264
1 / 1 (VMD)
Poll - - - Two-Way
root -
IQEye IQD30S 83 3.1/504 1 JPEG
H.264
1 / 1
(VMD) Poll - - -
Two-
Way root -
IQEye IQD31S 83 3.1/504 1 JPEG
H.264
1 / 1
(VMD) Poll - - -
Two-
Way root -
66 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
IQEye IQM30NE 83 3.2/4 1 JPEG
H.264
0 / 0
(VMD) Poll - - -
Two-
Way root Tested by manufacturer
IQEye IQM31NE 83 3.2/4 1 JPEG
H.264
0 / 0
(VMD) Poll - - -
Two-
Way root -
IQEye IQM32NE 83 3.2/4 1 JPEG
H.264
0 / 0
(VMD) Poll - - -
Two-
Way root Tested by manufacturer
Janteq 467 1 H.264 0 / 0 - ���� Type 3 ���� - - -
Johnson Controls
DVN5008 293 2.9.0.0300 16 MPEG4 128 / 8 - � Type 2 �
One-
Way admin
All settings, I/O and
Audio are read-only and
needs to be set on the
device. DVR support.
Johnson Controls
DVN5016 340 2.9.0.0300 16 MPEG4 128 / 16 - � Type 2 �
One-
Way admin
All settings, I/O and
Audio are read-only and
needs to be set on the
device. DVR support.
Johnson Controls
DVN5032 341 2.9.0.0300 32 MPEG4 128 / 16 - � Type 2 �
One-
Way admin
All settings, I/O and
Audio are read-only and
needs to be set on the
device. DVR support.
JVC VN-A1U 43 3.0, 3.2 1 JPEG 0 / 0 - � Type 1 - - - -
JVC VN-C10U 44 1.3, 2.0 1 JPEG
MPEG4 0 / 0 - - - - - - -
JVC VN-C20U 126 1.0, 1.03,
1.04 1 JPEG
2 / 2
(VMD)
Alert
Port - - - - - -
JVC VN-C30U 42 1.3, 3.2,
4.0 1 JPEG 0 / 0 - � Type 1 - - - -
JVC VN-C3WU 40 1.3, 3.2 1 JPEG 0 / 0 - � Type 1 - - - -
JVC VN-C205 169 1.05 1 JPEG 0 / 0 - - - - - - -
JVC VN-C215 146 1.00 1 JPEG 0 / 0 - - - - - - -
67 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
JVC VN-C625U 45 1.02, 2.06 1 JPEG 2 / 2 Alert
Port �
Type
1 & 2 � - - -
JVC VN-C655U 45 2.00, 2.07 1 JPEG 2 / 2 Alert
Port �
Type
1 & 2 � - - -
JVC VN-E4 /-E4E
/ -E4U 121 1.0E, 1.0.3 4 JPEG
4 / 1
(VMD)
Alert
Port � Type 3 �
One-
Way admin -
JVC VN-V25U 185 1.00, 1.01,
1.02, 2.02 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - - - admin -
JVC VN-V26U 185 1.00, 2.02 1 JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way admin
Two-Way Audio
supported from
firmware 2.02.
JVC VN-
V225U/VN-
V225VPU
185 1.00, 1.03 1 JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way admin
Two-Way Audio
supported from
firmware 2.02.
JVC VN-V685U 196 1.00, 3.03 1 JPEG
MPEG4
2 / 2
(VMD)
Alert
Port � Type 3 � - admin -
JVC VN-
V686U/V686WPU 196
1.00, 1.02,
1.06 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port � Type 3 � - admin -
JVC VN-V686BU/
V686WPBU 196 3.03 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port � Type 3 � - admin -
JVC VN-X35U 235 0.06, 2.02 1 JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way admin
Two-Way Audio
supported from
firmware 2.02.
JVC VN-
X235U(VN-
X235VPU
235 0.06, 1.02 1 JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way admin
Two-Way Audio
supported from
firmware 1.02.
Lenel ICT-220 345 2.2.227 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
Lenel ICT-230 345 2.2.227 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
68 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Lenel ICT-250 346 3.0.03 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
Lenel ICT-510 345 2.2.227 1 JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
Lenel LC-330FDX 345 2.2.227 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root
Tested by camera
manufacturer.
Linudix LWS800 511 11.110.001
6 4 JPEG 0 / 0 - � Type 3 � - admin -
Linudix LWS820 512 11.110.001
6 2 JPEG 0 / 0 - � Type 3 � - admin -
Linudix LWS840 511 11.110.001
6 4 JPEG 0 / 0 - � Type 3 � - admin -
Lumenera LE165 84 1.1, 1.6 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE175 84 1.1, 1.6 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE256 84 1.8 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE259 84 1.8 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE275 84 1.1, 1.6 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE375 84 1.1, 1.6 1 JPEG 0 / 0 - - - - - admin -
Lumenera LE575 84 1.8 1 JPEG 0 / 0 - - - - - admin -
Messoa NCB-855 344 V02.05 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Messoa NCR-875 344 V02.05 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Messoa NDR-895 344 V02.05 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way admin -
Messoa NDZ-860 343 X.3.0.6 1 JPEG
MPEG4 1 / 1 SMTP � Type 1 -
Two-
Way admin -
Messoa NIC-830 354 X.1.0.15 1 JPEG
MPEG4 1 / 1 SMTP - - -
Two-
Way admin -
69 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Messoa NIC-835 354 X.1.015 1 JPEG
MPEG4 1 / 1 SMTP - - -
Two-
Way admin -
Milestone
XProtect®
Screen Recorder
465 - 1 JPEG 0 / 0 - - - - - - See remarks for further
information.
Mobotix D10 86
M10-
V2.0.2.21
V2.2.3.12
1 JPEG 0 / 0 - - - - - admin
Mobotix D12 86
MX-
V3.0.6.24,
MX-
V3.06.33,
MX-V3.0.8.7
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
1 / 1
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.2.3. Audio only
supported with MxPEG
Mobotix D22M 86
MX-
V3.3.0.19
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.0.19. Audio only
supported with MxPEG
Mobotix D24 86
MX-
V4.0.1.15,
MX-
V4.0.2.33
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
Audio only supported
with MxPEG.
70 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Mobotix M1 86 M1-V1.9.4.8 1 JPEG 0 / 0 - - - - - admin -
Mobotix M10 86
M10-
V2.0.2.21
V2.2.3.12
1 JPEG 0 / 0 - - - - - admin -
Mobotix M12 86
MX-
V3.0.6.24,
MX-
V3.06.33,
MX-V3.0.8.7
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
1 / 1
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.2.3. Audio only
supported with MxPEG
Mobotix M22M 86
MX-
V3.0.3.26,
MX-
V3.06.33,
MX-V3.0.8.7
MX-
V3.3.2.3,
MX-
V3.4.0.9,
MX-
V3.5.2.23
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
MxPEG supported from
XPE 6.5a and firmware
3.3.2.3. Audio only
supported with MxPEG
Mobotix M24 86 MX-
V4.0.2.33 1
JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
Audio only supported
with MxPEG
71 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Mobotix Q22 260
MX-
V3.4.3.14,
MX-
V4.0.2.33
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
- - - - Two-
Way admin
Audio only supported
with MxPEG. Virtual PTZ
enabled in Normal view.
Mobotix Q24 328
MX-
V4.0.1.7,
MX-
V4.0.2.33
1 JPEG
MxPEG
0 / 0
(VMD)
(A, Te)
- - - - Two-
Way admin
Audio only supported
with MxPEG. Virtual PTZ
enabled in Normal view.
Mobotix T24 459 MX-
V4.0.4.18 1
JPEG
MxPEG
2 / 0
(VMD)
(A, Te)
Notificat
ion - - -
Two-
Way admin
Audio only supported
with MxPEG. Virtual PTZ
enabled in Normal view.
ONVIF
Conformant
Device
402 - 1
JPEG
MPEG4
H.264
5 / 5
(VMD)
(Ta)
- � Type 1,
2 or 3 �
One-
Way -
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Cannot autodetect when
using IPV6 address.
ONVIF
Conformant
Device 16 Chnl.
407 - 16
JPEG
MPEG4
H.264
5 / 5
(VMD)
(Ta)
- � Type 1,
2 or 3 �
One-
Way -
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Cannot autodetect when
using IPV6 address.
Optelecom
Siqura BC-2x
series
281
s20090505
NS,
s20090624
NS
1 JPEG
MPEG4
1 / 1
(VMD)
(Ta)
SMTP - - - Two-
Way Admin -
Optelecom
Siqura C-50 269 2.0.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin -
Optelecom
Siqura C-54 289 2.0.4 4
JPEG
MPEG4 0 / 0 - � Type 3 � - admin -
72 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Optelecom
Siqura C-60 321 2.5.0 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin -
Optelecom
Siqura FD-2x
series
281
s20090505
NS,
s20090624
NS
1 JPEG
MPEG4
1 / 1
(VMD)
(Ta)
SMTP - - - Two-
Way Admin -
Optelecom
Siqura HD-20 353 2.4.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin -
Optelecom
Siqura HD-22 353 2.4.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Optelecom
Siqura HD-26 353 2.4.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Optelecom
Siqura HD-60 353 2.4.1 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin -
Optelecom
Siqura HD-62 353 2.4.1 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin -
Optelecom
Siqura HD-
66WDR
353 2.4.1 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin -
Optelecom
Siqura MD-20 353 2.4.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Optelecom
Siqura MD-22 353 2.4.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Optelecom
Siqura MD-60 353 2.4.1 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin
Tested by camera
manufacturer.
73 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Optelecom
Siqura MD-62 353 2.4.1 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin
Tested by camera
manufacturer.
Optelecom
Siqura S-50 269 2.0.1 1
JPEG
MPEG4 0 / 0 - � Type 3 �
Two-
Way admin -
Optelecom
Siqura S-54 289 2.0.4 4
JPEG
MPEG4 0 / 0 - � Type 3 � - admin -
Optelecom
Siqura S-60 321 2.5.0 1
JPEG
MPEG4
H.264
0 / 0 - � Type 3 � Two-
Way admin -
Optelecom
Siqura S-64 399 3.0.0 4 H.264 0 / 0 - � Type 3 � - admin -
Optelecom
Siqura S-68 430 3.0.0 8 H.264 0 / 0 - � Type 3 � - admin -
Optelecom
Siqura V-30 295 2.0.1 1
JPEG
MPEG4 0 / 0 - � Type 3 � - admin -
Panasonic BB-
HCE481 series 24 2.00, 2.01 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM311 series 24
1.02, 1.08,
1.25, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM331 series 24
1.04, 1.10,
1.25, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM371A 24
1.05, 1.10,
1.25,1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher.
Panasonic BB-
HCM381 series 24
1.05, 1.10,
1.20, 1.30 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only supported on
XPE 6.0a or higher.
74 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic BB-
HCM403 24 1.33 1 JPEG 2 / 1 SMTP � Type 2 -
One-
Way admin1
Audio only supported on
XPE 6.0a or higher.
Panasonic BB-
HCM511 180 3.14 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM515 180 3.14 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM527 180 3.30 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM531 180 3.14 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM547 180 3.30 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM580 180 3.14 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM581 180 3.14 1
JPEG
MPEG4 0 / 1 - � Type 2 ����
One-
Way admin1 -
Panasonic BB-
HCM700 series
(Fixed)
383 4.12 1
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way admin1 -
Panasonic BB-
HCM700 series
(PTZ)
375 4.10 1
JPEG
MPEG4
H.264
0 / 1 - � Type 3 - One-
Way admin1 -
Panasonic
BB-HCS301 24 1.30 1 JPEG 1/1 - - - - - admin1 Video server
Panasonic BL –C1
series 24 1.30 1 JPEG 0 / 0 - - - - - admin1 -
Panasonic BL-
C10 series 24
1.13, 1.20,
1.22, 1.25 1 JPEG 0 / 0 SMTP � Type 2 - - admin1 -
Panasonic BL-
C20 series 24 1.30 1 JPEG 0 / 0 - - - - - admin1
Tested by camera
manufacturer.
75 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic BL-
C30 series 24
1.11, 1.20,
1.24R01,
1.30
1 JPEG 0 / 0 SMTP � Type 2 - - admin1 -
Panasonic BL-
C111 182 3.14 1
JPEG
MPEG4 0 / 0 - � Type 2 -
One-
Way admin1 -
Panasonic BL-
C131 182 3.14 1
JPEG
MPEG4 0 / 0 - � Type 2 -
One-
Way admin1 -
Panasonic BL-
C160 356 3.50 1
JPEG
MPEG4 0 / 0 SMTP - - -
One-
way admin1 -
Panasonic DG-
SP304V 449 1.03 1
JPEG
MPEG4
H.264
0 / 0
(VMD)
Notificat
ion - - -
One-
Way admin -
Panasonic
KX-HCM8 63
1.62, 1.76,
1.80, 1.83 1 JPEG 0 / 1 - - - - - admin
Tested by camera
manufacturer.
Panasonic
KX-HCM10 series 63
1.62, 1.76,
1.80, 1.83 1 JPEG 0 / 1 - � Type 2 - - admin -
Panasonic
KX-HCM110A
series
24 1.23, 1.25,
1.30 1 JPEG 2 / 1 - � Type 2 -
One-
Way admin1
Audio only
supported on
XPE 6.0a or higher,
Tested by camera
manufacturer.
Panasonic
KX-HCM230
series
63 1.62, 1.76,
1.80, 1.83 1 JPEG 0 / 1 - � Type 2 - - admin -
Panasonic
KX-HCM250
series
63 1.62, 1.76,
1.80, 1.83 1 JPEG 0 / 1 - � Type 2 - - admin
Tested by camera
manufacturer.
Panasonic
KX-HCM270
series
63 1.62, 1.76,
1.80, 1.83 1 JPEG 0 / 1 - � Type 2 - - admin
Tested by camera
manufacturer.
76 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic
KX-HCM280
series (except
280A)
63 1.62, 1.76,
1.82, 1.83 1 JPEG 0 / 1 - � Type 2 - - admin -
Panasonic KX-
HCM280A 24 1.09, 1.30 1 JPEG 1 / 1 - � Type 2 - - admin1
Tested by camera
manufacturer.
Panasonic WJ-
GXE500 377 0.23, 1.03 4
JPEG
MPEG4
H.264
2 / 1
(VMD)
(V)
Notificat
ion � Type 3 -
Two-
Way admin -
Panasonic WJ-
NT104 60 1.00G 1 (4) JPEG 0 / 0 - � Type 1 - - admin -
Panasonic WJ-
NT304 183 1.03, 1.31 4
JPEG
MPEG4
4 / 1
(VMD) - � Type 3 -
Two-
Way admin
Panasonic analogue
cameras via Coaxial
cable are supported.
Panasonic WV-
NF284 120
1.01E5,
1.02E0,
1.60E4
1 JPEG
MPEG4
1 / 1
(VMD) - - - -
One-
Way admin
Audio only supported on
XPE 6.0a or higher.
Panasonic WV-
NF302 211
1.01E3,
1.05E0,
1.50E5
1 JPEG
MPEG4
1 / 1
(VMD) - - - -
Two-
Way admin
Audio only supported on
XPE 6.0a or higher.
Panasonic
WV-NP240 / WV-
NP244
120
1.06,
1.22E2,
1.25,
1.80E4
1 JPEG
MPEG4
1 / 1
(VMD) - - - -
One-
Way admin
Audio only supported on
XPE 6.0a or higher.
Panasonic WV-
NP304 211
1.05E_1.06,
1.50E5 1
JPEG
MPEG4
1 / 1
(VMD) - - - -
Two-
Way admin
Audio only supported on
XPE 6.0a or higher.
Panasonic WV-
NP472 61 2.07/E 1 JPEG 1 / 1 FTP - - - - admin
Older firmware no
longer supported
Panasonic WV-
NP502 351 1.02, 1.10 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll - - -
Two-
Way admin
Audio only supported on
XPE 6.0a or higher.
77 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic WV-
NP1000 / WV-
NP1004
120 1.06E0,
1.21E0 1
JPEG
MPEG4
1 / 1
(VMD) - - - -
One-
Way admin
Audio only supported on
XPE 6.0a or higher.
Panasonic WV-
NS202/NS202A 143
1.02P7,
1.10PB
1.11P2,
2.10PA,
2.20PM,
2.70P7
1 JPEG
MPEG4
1 / 1
(VMD) - �
Type
1 & 2 �
Two-
Way admin
Support for server
saved configurations for
the Video Stream.
Audio only
supported on
XPE 6.0a or higher.
Two-Way Audio only
supported on Firmware
2.20PM or higher.
Panasonic
WV-NS320 series 64
1.15E
2.01E 1 JPEG 1 / 1 FTP � Type 3 � - Admin -
Pansonic WV-
NS950 197
1.06E0,
1.40E3,
1.60E3
1 JPEG
MPEG4
2 / 1
(VMD) - �
Type
1 & 2 �
Two-
Way admin -
Pansonic WV-
NS954 197
1.06E0,
1.40E3,
1.60E3
1 JPEG
MPEG4
2 / 1
(VMD) - �
Type
1 & 2 �
Two-
Way admin -
Panasonic WV-
NW470 85 2.14E 1 JPEG 1 / 1 FTP - - - - admin
Older firmware no
longer supported
Panasonic WV-
NW484 175
1.02E1,
1.03E3 1
JPEG
MPEG4
1 / 1
(VMD) - - - - - admin -
78 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic WV-
NW502 351 1.02, 1.10 1
JPEG
MPEG4
H.264
2 / 1
(VMD) Poll - - -
Two-
Way admin
Audio only
supported on
XPE 6.0a or higher.
Panasonic WV-
NW960 197
1.06E0,
1.40E3,
1.60E3
1 JPEG
MPEG4
2 / 1
(VMD) - �
Type
1 & 2 �
Two-
Way admin -
Panasonic WV-
NW964 197
1.06E0,
1.40E3,
1.60E3
1 JPEG
MPEG4
2 / 1
(VMD) - �
Type
1 & 2 �
Two-
Way admin -
Panasonic WV-SC384
461 1.03 1
JPEG
MPEG4 H.264
1 / 1 (VMD)
Notification
���� Type 1 & 2
���� Two-Way
admin -
Panasonic WV-
SC385 461 1.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion �
Type
1 & 2 �
Two-
Way admin -
Panasonic WV-
SF332 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin
Tested by camera
manufacturer.
Panasonic WV-
SF335 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
Panasonic WV-
SF336 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
Panasonic WV-
SF342 398 1.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
Panasonic WV-
SF346 398 1.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
79 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Panasonic WV-
SP102 449 1.02 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - - - admin -
Panasonic WV-
SP105 449 1.01 1
JPEG
H.264
0 / 0
(VMD)
Notificat
ion - - - - admin
Bitrate at 8192 only
available on H.264 with
1280x1024 as
resolution. Bitrate 64
and 128 does not work
with the highest
resolution.
Panasonic WV-
SP302 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin
Tested by camera
manufacturer.
Panasonic WV-
SP305 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin
Tested by camera
manufacturer.
Panasonic WV-
SP306 398 0.47, 1.06 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion - - -
Two-
Way admin -
Panasonic WV-SW352
398 1.04 1 JPEG MPEG4 H.264
1 / 1 (VMD)
Notification
- - - Two-Way
admin -
Panasonic WV-
SW355 461 1.02 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion �
Type
1 & 2 �
Two-
Way admin -
Panasonic WV-
SW395 461 1.02 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
Notificat
ion �
Type
1 & 2 �
Two-
Way admin -
Pentax Versacam
IC-4 50 1.2.3 1 JPEG 2 / 0 - - - - - admin
Uses the Video:0050
driver
Pelco Camclosure
IP series 149
01.00.0026,
1.00.0049 1 MPEG4 0 / 0 - - - - - admin -
80 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Pelco DX8000 446 2.0.00.1192 32 JPEG
MPEG4 0 / 16 - � - � - Admin
DVR settings have to be
changed on the device.
MPEG4 only working
with connected IP
cameras and codec is
changed in the XProtect
software. The Pelco
DX8000 must be on the
same subnet as the
recording server.
Pelco DX8100 446 2.0.00.2717 32 JPEG
MPEG4 0 / 16 - � - � - Admin
DVR settings have to be
changed on the device.
MPEG4 only working
with connected IP
cameras and codec is
changed in the XProtect
software. The Pelco
DX8100 must be on the
same subnet as the
recording server.
Pelco Endura
NET5301T 144
1.03.1047,
1.04.0102,
1.04.0111
1 JPEG
MPEG4 0 / 2 - � Type 2 � - - -
Pelco Endura
NET5308T 166
1.03.1047,
1.04.0102,
1.04.0111
8 JPEG
MPEG4 0 / 4 - � Type 2 � - - -
Pelco Endura
NET5316T 167
1.03.1047,
1.04.0102,
1.04.0111
16 JPEG
MPEG4 0 / 8 - � Type 2 � - - -
Pelco Endura
NET5401T 456 1.4.9, 1.7.8 1
JPEG
H.264 1 / 1
Notification
- - - One-
way admin
Pelco Endura
NET5402T 456 1.4.9, 1.7.8 2
JPEG
H.264 1 / 1
Notification
- - - One-
way admin
81 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Pelco Endura
NET5404T 456 1.4.9, 1.7.8 4
JPEG
H.264 1 / 1
Notification
- - - One-
way admin
Pelco ID10 254 1.3.4.9111,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco ID30 254 1.3.4.9111,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notific
ation - - -
One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IDE20 254 1.3.4.9111,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IDS0 254 1.3.4.9111,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notific
ation - - -
One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IE10 254 1.5.9 1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IE30 254 1.5.9 1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IEE10 254 1.5.9 1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IEE20 254 1.5.9 1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IES0 254 1.5.9 1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IM10 254
1.3.10.9260
, 1.4.9,
1.5.9
1 JPEG
H.264 1 / 1
Notification
- - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IMS0 254
1.3.10.9260
, 1.4.9,
1.5.9
1 JPEG
H.264 1 / 1
Notific
ation - -
One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IP3701 176 01.00.0002,
1.00.0026 1 MPEG4 0 / 0 - - - - - admin -
Pelco IX10 254 1.3.7,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
82 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Pelco IX30 254 1.3.7,
1.4.9, 1.5.9 1
JPEG
H.264 1 / 1
Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IXE10 254 1.7.8 1 JPEG H.264
1 / 1 Notification
- - - One-Way
admin -
Pelco IXE20 254
1.3.7,
1.4.9,
1.5.9,
1.6.13
1 JPEG
H.264 1 / 1
Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco IXS0 254 1.3.7,
1.4.9, 1.5.9 1
JPEG
MPEG4
H.264
1 / 1 Notification
- - - One-
Way admin
Audio is supported from
firmware 1.5.9.
Pelco NET300 208 15050210 1 JPEG
MPEG4 0 / 1 - � Type 2 - - service -
Pelco NET350 208 30050210 1 JPEG
MPEG4 0 / 1 - � Type 2 -
Two-
Way service -
Pelco SPECTRA
HD 436
1.6.131
1.7.19 1
JPEG
H.264 0 / 0 - � Type 3 � - admin -
Pelco Spectra IV-
IP 213
01.00.0009,
1.00.0038 1 MPEG4 0 / 1 - � Type 3 � - admin -
Pelco Spectra IV-
IP H.264 436
1.5.3.2084,
1.7.8 1
JPEG
MPEG4
H.264
7 / 1 Notification
� Type 3 � One-
Way admin -
Pelco SpectraMini
IV-IP 213
1.00.0011,
1.00.0022 1 MPEG4 0 / 1 - � Type 3 � - admin -
Philips NETSVR-1 93 1.2.7 1 JPEG 1 / 0 FTP - - - - admin -
Philips NETSVR-6 92 1.4.8 6 JPEG 1 / 0 FTP - - - - admin -
Pixord 120 72
2.26, 2.32
2.34, 2.38,
2.52
2 JPEG 4 / 1 Alert
Port - - - - root -
83 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Pixord 126 75 2.38 1 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 200 73
2.26, 2.32
2.34, 2.38,
2.42, 2.46
1 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 201 73 2.43, 2.44 1 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 205 77
2.26, 2.32
2.34, 2.38,
2.42, 2.46
1 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 207 77 2.44 1 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 24X 74
2.16, 2.26
2.32, 2.34
2.38, 2.42,
2.46, 2.52
4 JPEG 4 / 1 Alert
Port - - - - root -
Pixord 261 78 2.36, 2.38,
2.40, 2.46 1 JPEG 4 / 0
Alert
Port � Type 2 - - root -
Pixord 1000 75
2.16, 2.26
2.32, 2.34
2.38, 2.42
1 JPEG 4 / 1 Alert
Port � Type 2 - - root -
Pixord 400/400W 151 V2.11, 2.21 1 MPEG4 0 / 0 - - - - - root -
Pixord 461 148 V2.11 1 MPEG4 1 / 1 Alert
Port � Type 2 - - root -
Pixord 463 148 V2.11 1 MPEG4 1 / 0 Alert
Port � Type 2 - - root -
84 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Pixord
1401/1401W 136 V2.11, 2.21 1 MPEG4 0 / 0 - � Type 2 - - root -
Pixord 2000 76
2.16, 2.26
2.32, 2.34
2.38, 2.42
2 JPEG 4 / 1 Alert
Port � Type 2 - - root -
Pixord 4000 151
2.16, 2.26
2.32, 2.34
2.38, 2.42
4 JPEG 4 / 1 Alert
Port � Type 2 - - root -
Pixord P600 439 2.05.364 1 JPEG
H.264
2 / 1
(VMD)
Poll /
Notificat
ion
- - - Two-
Way root -
Pixord
PD636/PD636E 485 2.0.0.311 1
JPEG
H.264
4 / 1
(VMD)
Poll /
Notificat
ion
� Type 3 � Two-
Way root -
Polar Industries
zPan100 501
V1.04.01-
NB 1 MPEG4 0 / 0 - � Type 2 - - Admin
PTZ up/down arrow
changes views and
left/right arrows pans
the view
Provideo SD-
606W 279 1.3008 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port - - - - root -
Provideo SD-
705VPRO-1 280 1.3008 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 - - root -
PSIA Conformant
Device 403 - 1
JPEG
MPEG4
H.264
4 / 4 Poll � Type 1,
2 or 3 �
One-
Way - -
PSIA Conformant
Device 16-Chnl. 404 - 16
JPEG
MPEG4
H.264
4 / 4 Poll � Type 1,
2 or 3 �
One-
Way - -
Samsung
SCC-C6475 131 1.7 (0809) 1
JPEG
MPEG4 0 / 0 - � Type 2 � - root
Older firmware is not
supported.
85 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Samsung SHR-
2040 165 2.22 4 MPEG4 0 / 0 - - - - - - 4 port DVR
Samsung SNB-
5000 402 1.30 1
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
Samsung SNB-
7000 402 1.00 1
JPEG
H.264 0 / 0 - � Type 2 � - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNC-
550 191 2.4.1, 2.8.0 1
JPEG
MPEG4
1 / 0
(VMD) - - - -
Two-
Way admin -
Samsung SNC-
570 291 1.0.0 1
JPEG
MPEG4
1 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung SNC-
1300 432 1.2.4 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way admin
Output duration must be
set to always on the
devicepage to work
correctly.
Samsung SNC-
B2315 227
2.00, 2.01,
2.10 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way root -
Samsung SNC-
B2331 374 1.10 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
Alert
Port - - - - root -
Samsung SNC-
B2335 372 1.10 1
JPEG
MPEG4
H.264
2 / 2
(OD)
(Ta, Tr)
Alert
Port - - -
Two-
Way root -
86 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Samsung SNC-
B5368 374 1.10 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
Alert
Port - - - - root
New version of firmware
1.10 converts device to
Samsung SND-3080.
After conversion device
will not work until
username is set to
admin for the device.
Samsung SNC-
B5395 248 2.00, 2.01 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way root -
Samsung SNC-
B5399 372 1.10 1
JPEG
MPEG4
H.264
2 / 2
(OD)
(Ta, Tr)
Alert
Port - - -
Two-
Way root
New version of firmware
1.10 converts device to
Samsung SNV-3080.
After conversion device
will not work until
username is set to
admin for the device.
Samsung SNC-
C6225 325 1.00 1
JPEG
MPEG4
2 / 1
(VMD)
Alert
Port � Type 3 �
Two-
Way root -
Samsung SNC-
C7225 325 1.00 1
JPEG
MPEG4
2 / 1
(VMD)
Alert
Port � Type 3 �
Two-
Way root -
Samsung SNC-
C7478 299 1.00, 1.01 1
JPEG
MPEG4
8 / 4
(VMD)
Alert
Port � Type 3 �
Two-
Way root -
Samsung SNC-
M300 226 2.00, 2.01 1
JPEG
MPEG4
2 / 2
(VMD)
Alert
Port - - -
Two-
Way root -
Samsung
SND-460V 329 1.2.0 1
JPEG
MPEG4
1 / 0
(VMD) - - - -
Two-
Way admin -
Samsung SND-
560 292 1.0.0 1
JPEG
MPEG4
1 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung SND-
3080 374 1.10 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
Alert
Port - - - - admin
Device cannot be
autodetected using
default username.
87 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Samsung SND-
5080 402 1.00 1
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SND-
7080 402 1.00 1
JPEG
H.264 0 / 0 - - - - - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNP-
1000/
SNP-1000A
195 2.8.0 1 JPEG
MPEG4
2 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung SNP-
3120 402
1.22_11012
0_1 1
JPEG
MPEG4
H.264
0 / 0
(VMD) - � Type 2 - - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNP-
3301 396 1.20 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin -
Samsung SNP-
3301H 396 1.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Samsung SNP-
3300/
SNP-3300A
194 2.4.0, 2.8.0 1 JPEG
MPEG4
4 / 0
(VMD) - � Type 3 �
Two-
Way admin -
88 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Samsung SNP-3350
396 1.20 1 JPEG MPEG4
4 / 2 (VMD)
Poll ���� Type 3 ���� Two-Way
admin
Output duration must be set to always on the devicepage to work correctly.
Tested by camera manufacturer.
Samsung SNP-
3370 396 1.20 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Samsung SNP-
3370TH 396 1.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Tested by camera
manufacturer.
Samsung SNP-
3430H 402
1.07_11032
4 1
JPEG
MPEG4
H.264
0 / 0
(VMD) - � Type 2 - - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNP-
3750 396
1.1.12,
1.20 1
JPEG
MPEG4
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Output duration must be
set to always on the
devicepage to work
correctly.
Samsung SNS-
100 192 2.4.1, 2.8.0 1
JPEG
MPEG4
1 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung SNS-
400 193 2.4.1, 2.8.0 4
JPEG
MPEG4
4 / 0
(VMD) - � Type 3 �
Two-
Way admin -
Samsung
SNT-1010 147 1.3, 2.1 1
JPEG
MPEG4 0 / 0 - � Type 2 - - root
The interlaced D1 and
VGA resolutions in
MPEG4 are supported
from XPE 6.5d.
89 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Samsung SNV-
3080 372 1.10 1
JPEG
MPEG4
H.264
2 / 2
(Ta, Tr)
Alert
Port - - -
Two-
Way admin
Device cannot be
autodetected using
default username.
Samsung SNV-
5080 402 1.00 1
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Samsung SNV-
7080 402 1.00 1
JPEG
H.264 0 / 0 - - - - - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported. Tested by
camera manufacturer.
Sanyo VCC-400N 206 1.10, 1.22 1 JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
Tested by camera
manufacturer.
Sanyo VCC-9500 206 2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
Sanyo VCC-
9500P 206
2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
90 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VCC-9600 206 2.10, 2.20.1
2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
Sanyo VCC-
9600P 206
2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
Sanyo VCC-9700 206 2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
Sanyo VCC-
9700P 206
2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. Tested by
camera manufacturer.
H.264 only supported
from firmware 2.10.
Sanyo VCC-9800 206 2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. H.264 only
supported from
firmware 2.10.
Sanyo VCC-
9800P 206
2.10,
2.20.1, 2.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 -
Two-
Way admin
VA-80LAN versions not
supported. H.264 only
supported from
firmware 2.10.
Sanyo VCC-
HD2100 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
91 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VCC-
HD2100P 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
Sanyo VCC-
HD2300 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
Sanyo VCC-
HD2300P 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
Sanyo VCC-
HD2500 358
CAM MAIN
1.00-06,
1.02-00
NET MAIN
1.00-03,
1.03-00
1 JPEG
H.264
2 / 2
(VMD) Poll - - -
Two-
Way admin -
Sanyo VCC-
HD2500P 358
CAM MAIN
1.00-06,
1.02-00
NET MAIN
1.00-03,
1.03-00
1 JPEG
H.264
2 / 2
(VMD) Poll - - -
Two-
Way admin -
Sanyo VCC-
HD4000 206 1.00, 1.04 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin -
Sanyo VCC-
HD4000P 206 1.00, 1.04 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin -
Sanyo VCC-
HD4600 368
CAM MAIN
1.00, 1.02
NET MAIN
1.03-00
1 JPEG
H.264
2 / 2
(VMD) Poll � Type 3 -
Two-
Way admin
Output time is always 5
seconds.
92 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VCC-
HD5400 369
CAM MAIN
1.00, 1.02
NET MAIN
1.00-00,
1.03-00
1 JPEG
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Output time is always 5
seconds.
Sanyo VCC-
HD5600 370
CAM MAIN
1.00, 1.02
NET MAIN
1.00-00,
1.03-00
1 JPEG
H.264
4 / 2
(VMD) Poll � Type 3 �
Two-
Way admin
Output time is always 5
seconds. Tested by
camera manufacturer.
Sanyo VCC-
HDN1(S) 206 1.00, 1.04 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin -
Sanyo VCC-
N6584 206 1.10, 1.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
N6695P 206 1.10, 1.22 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
WB2000 / VCC-
WB4000
56
1.42,
1.43M,
1.44, 1.45,
1.46
1 JPEG 0 / 0 - - - - - ID2 & ID3
Passwords for user ID2
& ID3 must be set to
the same password.
Sanyo VCC-P450 206 1.01 1 JPEG 0 / 0 - � - - - admin Tested by camera
manufacturer.
Sanyo VCC-
P450NA 206 1.01 1 JPEG 0 / 0 - � - - - admin
Tested by camera
manufacturer.
Sanyo VCC-P470 206 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VCC-
P470NA 206 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VCC-
P7574 142 1.01 1 JPEG 0 / 0 - � - - - admin
Tested by camera
manufacturer.
Sanyo VCC-
P7575P 142 1.01 1 JPEG 0 / 0 - � - - - admin
Tested by camera
manufacturer.
93 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VCC-
P9574 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
P9574N 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
P9575P 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
PN9575P 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
PT490 206 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
PT490NA 206 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
PT500 206 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
PT500NA 206 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VCC-
XZ200 206 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VCC-
XZ200P 206 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VCC-
XZ600P 206 2.10, 2.20.1 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
Tested by camera
manufacturer. H.264
only supported from
firmware 2.10.
Sanyo VCC-
XZN600P 206 2.10, 2.20.1 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
Tested by camera
manufacturer. H.264
only supported from
firmware 2.10.
Sanyo VCC-
ZM600P 206 2.10, 2.20.1 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
H.264 only supported
from firmware 2.10.
94 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VCC-
ZMN600P 206 2.10, 2.20.1 1
JPEG
H.264
1 / 1
(VMD) SMTP � Type 3 - - admin
H.264 only supported
from firmware 2.10.
Sanyo VDC-
DP7584 142 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VDC-
DP7585P 142 1.01 1 JPEG 0 / 0 - � - - - admin -
Sanyo VDC-
DP9584 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VDC-
DP9584N 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VDC-
DP9585 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin
Tested by camera
manufacturer.
Sanyo VDC-
DPN9585P 142 M06051501 1 JPEG 0 / 0 - � Type 2 - - admin -
Sanyo VDC-
HD3100 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
Sanyo VDC-
HD3100P 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin
Tested by camera
manufacturer.
Sanyo VDC-
HD3300 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin -
Sanyo VDC-
HD3300P 367
CAM MAIN
1.00-06,
1.02-01
1 JPEG
H.264
2 / 2
(VMD) Poll - - - - admin -
95 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sanyo VDC-
HD3500 358
CAM MAIN
1.00-06,
1.02-00
NET MAIN
1.00-03
1.03-00
1 JPEG
H.264
2 / 2
(VMD) Poll - - -
Two-
Way admin
Tested by camera
manufacturer.
Sanyo VDC-
HD3500P 358
CAM MAIN
1.00-06,
1.02-00
NET MAIN
1.00-03
1.03-00
1 JPEG
H.264
2 / 2
(VMD) Poll - - -
Two-
Way admin
Tested by camera
manufacturer.
Sanyo VSP-
SV2000 56
1.42,
1.43M,
1.44, 1.45,
1.46
4 JPEG 0 / 0 - - - - - ID2 & ID3
Passwords for user ID2
& ID3 must be set to
the same password.
Scallop Imaging
D7-180 488 1.0.0 1 H.264 0 / 0 - - - - - admin -
Siemens
CCIC1345 252 6.8 1
JPEG
MPEG4
1 / 0
(VMD) SMTP - - -
One-
Way admin
Audio needs to be
enabled on device
webpage manually.
Siemens
CCIS1345 252 6.6 1
JPEG
MPEG4
1 / 0
(VMD) SMTP - - -
One-
Way admin
Audio needs to be
enabled on device
webpage manually.
Siemens
CCIS1345-DN 252 6.8 1
JPEG
MPEG4
1 / 0
(VMD) SMTP - - -
One-
Way admin
Audio needs to be
enabled on device
webpage manually.
Siemens
CCIW1345 252 6.8 1
JPEG
MPEG4
1 / 0
(VMD) SMTP - - -
One-
Way admin
Audio needs to be
enabled on device
webpage manually.
96 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-CH110 453 1.22 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH120 451 1.13.00,
1.31 1
JPEG
MPEG4
H.264
1 / 1 (VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH140 378 1.07,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-CH160 452 1.13.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH180 378 1.10.03,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-CH210 453 1.12.00 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH220 452 1.21.02 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH240 378 1.10.03,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-CH260 452 1.23.02 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-CH280 378 1.26.01,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
97 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-CM120 215 1.00 1 JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-CS3 54 0.15 1 JPEG 1 / 2 FTP - - - - admin -
Sony SNC-CS10 88 1.01, 1.05 1 JPEG
MPEG4 1 / 2 Poll - - - - admin
Only I/O Output 1 can
be used. Output 2 is
only supported by the
Sony DF devices.
Sony SNC-CS11 88 1.01, 1.05 1 JPEG
MPEG4 1 / 2 Poll - - -
Two-
Way admin
Only I/O Output 1 can
be used. Output 2 is
only supported by the
Sony DF devices.
Sony SNC-CS20 216 1.00 1 JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-CS50 125
1.02, 1.13,
2.20, 2.21,
2.22, 2.30
1
JPEG
MPEG4
H.264
2 / 2
(OD) Poll - - -
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
H.264 only supported
with firmware 2.22 or
newer.
Sony SNC-DF40 88 1.00, 1.11,
1.17 1
JPEG
MPEG4 1 / 2 Poll - - -
Two-
Way admin -
Sony SNC-DF50 178 1.05, 1.11,
1.12 1
JPEG
MPEG4
H.264
1 / 2 Poll - - - Two-
Way admin
H.264 only supported
with firmware 1.12 or
newer.
Sony SNC-DF70 88 1.01, 1.11,
1.17 1
JPEG
MPEG4 1 / 2 Poll - - -
Two-
Way admin -
Sony SNC-DF80 178 1.05, 1.11,
1.12 1
JPEG
MPEG4
H.264
1 / 2 Poll - - - Two-
Way admin
H.264 only supported
with firmware 1.12 or
newer.
98 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-DF85 178 1.00 1
JPEG
MPEG4
H.264
1 / 2 Poll - - - Two-
Way admin -
Sony SNC-DH110 453 1.26 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-
DH110T 453 1.26 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-DH120 451 1.13.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-
DH120T 452 1.13.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-DH140 376 1.07 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll � Type 1 - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-DH160 452 1.13.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-DH180 376 1.07 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll � Type 1 - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-DH210 453 1.26 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-
DH210T 453 1.26 1
JPEG
MPEG4
H.264
1 / 0
(VMD)
(Ta)
Poll � Type 3 � - admin -
99 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-DH220 451 1.21.02 1
JPEG
MPEG4
H.264
1 / 1 (VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-DH240 378 1.10.03,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-
DH240T 378
1.10.03,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-DH260 452 1.23.00 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(Ta)
Poll � Type 3 � - admin -
Sony SNC-DH280 378 1.26.01,
1.34.00 1
JPEG
MPEG4
H.264
1 / 2
(VMD)
(Ta, Va)
Poll - - - Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-
DM110 215 1.01 1
JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-
DM160 215 1.01 1
JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-DS10 216 1.01 1 JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-DS60 216 1.00 1 JPEG
MPEG4
1 / 2
(OD) Poll - - -
Two-
Way admin -
Sony SNC-EP520
493 1.40 1
JPEG
MPEG4 H.264
2 / 1
(VMD) (Va)
Poll ���� Type 1 & 2
���� Two-Way
admin
Tested by design
using Sony SNC-EP521
Sony SNC-EP521
493 1.40 1 JPEG MPEG4 H.264
2 / 1 (VMD) (Va)
Poll ���� Type 1 & 2
���� Two-Way
admin -
100 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-EP580
493 1.40 1 JPEG MPEG4 H.264
2 / 1 (VMD) (Va)
Poll ���� Type 1 & 2
���� Two-Way
admin -
Sony SNC-M1 /
Sony SNC-M1W 102 1.10 1 JPEG 0 / 0 - - - - - admin
MPEG is not supported
on this device.
Sony SNC-M3 /
Sony SNC-M3W 102 1.10 1 JPEG 0 / 0 - � Type 1 - - admin
MPEG is not supported
on this device.
Sony SNC-P1 88
1.01, 1.03,
1.11, 1.22,
1.28
1 JPEG
MPEG4
1 / 1
(OD) Poll - - -
Two-
Way admin
Only I/O Output 1 can
be used. Output 2 is
only supported by the
Sony DF devices. Object
Detection (OD) events
only supported on XPE
6.0a or higher
Sony SNC-P5 98 1.00, 1.22,
1.28 1
JPEG
MPEG4
1 / 1
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
Sony SNC-RH124 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RH164 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RS44N 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RS44P 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
101 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-RS46N 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RS46P 352 1.02.00,
1.34.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
VMF events supported
through VMD events.
Sony SNC-RS84N 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RS84P 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RS86N 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RS86P 352 1.02.00 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(Ta)
Poll � Type
1 & 2 �
Two-
Way admin
Tested by camera
manufacturer. VMF
events supported
through VMD events.
Sony SNC-RX530 124 1.00, 2.30,
3.01, 3.10 1
JPEG
MPEG4
H.264
1 / 1
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
H.264 only supported
with firmware 3.01 or
newer.
102 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNC-RX550 124
1.02, 1.03,
1.13, 2.20,
2.44, 3.00,
3.01, 3.10
1
JPEG
MPEG4
H.264
2 / 2
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
H.264 only supported
with firmware 3.01 or
newer.
Sony SNC-RX570 124 1.00, 2.30,
3.01, 3.10 1
JPEG
MPEG4
H.264
1 / 1
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
H.264 only supported
with firmware 3.01 or
newer.
Sony SNC-RZ25 89
1.02, 1.11,
1.22, 1.23,
1.29, 1.40
1 JPEG
MPEG4
2 / 2
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher
Sony SNC-RZ30 52
2.04, 2.05,
2.12a, 2.13,
2.14, 2.24
1 JPEG 1 / 2
(OD) Poll � Type 1 � - admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher
Sony SNC-
RZ30/2 52
3.02, 3.10a,
3.14 1 JPEG
1 / 2
(OD) Poll � Type 1 � - admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher
Sony SNC-RZ50 128 1.06, 2.21,
2.22, 2.43 1
JPEG
MPEG4
H.264
2 / 2
(OD) Poll �
Type
1 & 2 �
Two-
Way admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher.
H.264 support from
firmware 2.22 or newer.
Sony SNC-Z20 53 1.00, 1.02 1 JPEG 1 / 2
(OD) Poll �
Type
1 & 2 - - admin
Object Detection (OD)
events only supported
on XPE 6.0a or higher
Sony SNC-VL10 51 1.4.0 1 JPEG 1 / 2 FTP - - - - admin -
103 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Sony SNT-EP104 360 1.02.00 4
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - - - admin
VMF events supported
through VMD events.
Sony SNT-EP154 360 1.04.00 4
JPEG
MPEG4
H.264
0 / 0
(VMD) Poll - - - - admin
VMF events supported
through VMD events.
Sony SNT-EX101 359 1.02.00 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(Ta)
Poll � Type 3 � Two-
Way admin
VMF events supported
through VMD events.
Sony SNT-
EX101E 359 1.02.00 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(Ta)
Poll � Type 3 � Two-
Way admin
VMF events supported
through VMD events.
Sony SNT-EX104 357 1.02.00 4
JPEG
MPEG4
H.264
16 / 8
(VMD)
(Ta)
Poll � Type 3 � Two-
Way admin
VMF events supported
through VMD events.
Sony SNT-EX154 357 1.04.00 4
JPEG
MPEG4
H.264
16 / 8
(VMD)
(Ta)
Poll � Type 3 � Two-
Way admin
Only channel 1 has
Audio. VMF events
supported through VMD
events.
Sony SNT-V304 9 2.22, 2.30 4 JPEG 1 / 0 FTP � Type 1 - - root -
Sony SNT-V501 82 - 1 JPEG 1 / 2 FTP - - - - admin -
Sony SNT-V704 113 1.24, 2.000,
2.13 4
JPEG
MPEG4 4 / 4 Poll � Type 2 �
Two-
Way admin 2
Speco
Technologies
SIPB1/SIPB2
501 V3.07.02 1 MPEG4 0 / 0 - - - - One-
Way Admin
Tested by camera
manufacturer.
Speco
Technologies
SIPB3/SIPB4
501 V3.07.02 1 MPEG4 0 / 0 - - - - One-
Way Admin
Tested by camera
manufacturer.
104 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Speco
Technologies
SIPMPT5
501 V3.08.08 1 MPEG4 0 / 0 - - - - One-
Way Admin
Tested by camera
manufacturer.
Speco
Technologies
SIPSD10X
501 V3.08.08 1 MPEG4 0 / 0 - - - - One-
Way Admin
Tested by camera
manufacturer.
Stardot Express
2 448 1.1.69 2 JPEG 3 / 1 Poll � Type 3 � - admin
PTZ is delayed and PTZ
with Joystick only have
one speed.
Stardot Express
4 448 1.1.69 4 JPEG 3 / 1 Poll � Type 3 � - admin
PTZ is delayed and PTZ
with Joystick only have
one speed.
StarDot NetCam
XL 186 1.1.53 1 JPEG 0 / 0 - - - - - admin -
StarDot NetCam
SC 5 MP 186 1.1.55 1 JPEG 0 / 0 - - - - - admin -
Stardot
SDH500BN 447 1.1.69 1
JPEG
H.264 1 / 1 Poll � Type 3 � - admin
PTZ is delayed and PTZ
with Joystick only have
one speed.
Stardot SDH500VN
447 1.1.71 1 JPEG H.264
1 / 1 Poll ���� Type 3 ���� - admin PTZ is delayed and PTZ with Joystick
only have one speed.
Toshiba IK-
WB01A 115
300-300-
300-101,
300-312-
311-101
1 JPEG 0 / 0 - � Type 2 - - root -
Toshiba IK-
WB02A 114 1.01.037.1A 1 JPEG 0 / 0 - - - - - root -
105 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Toshiba IK-
WB11A 59
301-300-
300-111,
302-312-
311-111
1 JPEG 0 / 0 - � Type 2 - - root -
Toshiba IK-
WB15A 115
1.01.10.009
.115,
1.04.10.009
.115,
1.05.10.009
.115,
1.05.10.200
.115
1 JPEG 1 / 0
(VMD) - � Type 2 - - root
Desktop mount not
supported.
Toshiba IK-
WB16A 471 0100f 1
JPEG
MPEG4
1 / 1
(VMD) Poll � Type 2 � Out root -
Toshiba IK-
WB21A 115
1.00.E.101,
2.09.E.103.
121
1 JPEG 1 / 0
(VMD) - � Type 2 - - root
Desktop mount not
supported.
Toshiba IK-
WB30A 472 0100e 1
JPEG
MPEG4
1 / 1
(VMD) Poll � Type 2 - Out root -
Toshiba IK-
WD01A 473 0100e 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - - Out root -
Toshiba IK-
WR01A 114
1.01.015,
1.01.016 1 JPEG 0 / 0 - - - - - root -
Toshiba IK-
WR12A 473 0100c 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - - Out root -
Toshiba Teli
CI7010 181 1
JPEG
MPEG4 0 / 0 - - - - - admin -
Toshiba Teli
CI8000-D 491 1.0.23 1
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
Two-
Way admin
Output time is always 1-
2 seconds.
Toshiba Teli
CI8010 263 1
JPEG
MPEG4 2 / 2 Poll � Type 1 -
Two-
Way root -
106 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Toshiba Teli
CI8100-D 491 1.0.26 1
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Toshiba Teli
CI8110D 263 1
JPEG
MPEG4 2 / 3 Poll � Type 1 -
Two-
Way root -
Toshiba Teli
CI8210D 250 1
JPEG
MPEG4 2 / 3 Poll � Type 1 -
Two-
Way root -
Toshiba Teli
CI8600-D 491 1.0.26 1
MPEG4
H.264
1 / 1
(VMD) SMTP - - -
One-
Way admin
Output time is always 1-
2 seconds.
Toshiba Teli
EJ7000 170 1
JPEG
MPEG4 0 / 0 - � Type 1 � - - -
Toshiba Teli
GE2000 484 1
JPEG
MPEG4 8 / 8
Notificat
ion �
Type 1
or 3 � - user -
UDP IPC1100 231 1.5.641.132
90 1
JPEG
MPEG4
1 / 1
(VMD)
(B, V)
SMTP - - - Two-
Way root -
UDP IPC3100 231 1.5.641.132
90 1
JPEG
MPEG4
1 / 1
(VMD)
(B, V)
SMTP - - - Two-
Way root
Tested by camera
manufacturer.
UDP IPC3500 231 1.5.641.132
90 1
JPEG
MPEG4
1 / 1
(VMD)
(B, V)
SMTP - - - Two-
Way root
Tested by camera
manufacturer.
UDP IPC4100 229 1.5.641.132
90 1
JPEG
MPEG4
2 / 1
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root -
UDP IPC4500 229 1.5.641.132
90 1
JPEG
MPEG4
2 / 1
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root
Tested by camera
manufacturer.
UDP IPE100 525 1.06.03 1
JPEG
MPEG4
H.264
0 / 0
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
107 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
UDP IPE1100 525 1.06.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE1100M 525 1.06.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE3500 525 1.06.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE3500L 525 1.06.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE3510 525 1.06.03 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE4100 524 1.06.03 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE4500 524 1.06.03 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage. Tested by
camera manufacturer.
UDP IPE5500 524 1.06.01 1
JPEG
MPEG4
H.264
1 / 1
(VMD)
(An, Ta)
Notificat
ion � Type 3 �
Two-
Way root
VCA events must be
setup on the device
webpage.
108 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
UDP NVC1000 525 1.06.01,
1.06.03 1
JPEG
MPEG4
H.264
2 / 2
(VMD)
(An, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage.
UDP NVC4000
R12/R40 526
1.06.01,
1.06.03 1
JPEG
MPEG4
H.264
4 / 2
(VMD)
(An, Ta)
Notificat
ion - - -
Two-
Way root
VCA events must be
setup on the device
webpage.
UDP NVE12K 230 1.5.641.132
90 12
JPEG
MPEG4
12 / 12
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root
Rack solution. Tested by
camera manufacturer.
UDP NVE40K 230 1.5.641.132
90 40
JPEG
MPEG4
40 / 40
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root
Rack solution. Tested by
camera manufacturer.
UDP NVE100 232 1.5.641.132
90 1
JPEG
MPEG4
0 / 0
(VMD)
(B, V)
SMTP - - - One-
Way root
Tested by camera
manufacturer.
UDP NVE1000 233 1.5.641.132
90 1
JPEG
MPEG4
2 / 2
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root
Tested by camera
manufacturer.
UDP NVE2000 234 1.5.641.132
90 2
JPEG
MPEG4
2 / 2
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root
Tested by camera
manufacturer.
UDP NVE4000 230 1.5.641.132
90 4
JPEG
MPEG4
4 / 4
(VMD)
(B, V)
SMTP � Type 3 - Two-
Way root -
Universal driver 400 - 1
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way - For setup see Remarks.
Universal driver
16 Chnl. 401 - 16
JPEG
MPEG4
H.264
0 / 0 - - - - One-
Way - For setup see Remarks.
109 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
USB Camera
driver 445 - 4 JPEG 0 / 0 - - - -
One-
Way - For setup see Remarks.
Vantage
VIPC1100E 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC1311EP 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC1431EP 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC3100E 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC3211EP 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC3311EP 501
V3.03.07,
V3.05.05 1 MPEG4 0 / 0 - - - -
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC5300 501
V2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
Vantage
VIPC5320 501
V.2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
Vantage
VIPC6510F 501
V2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - � Type 1
or 3 �
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC6610F 501
V2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - � Type 1
or 3 �
One-
Way Admin
Tested by camera
manufacturer.
Vantage
VIPC7100 series 501
V2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
110 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Vantage
VIPC7200 series 501
V2.03.02,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
Vantage
VIPC7300 series 501
V2.03.02,
V2.05.12,
V2.06.15
1 MPEG4 0 / 0 - - - - - Admin Tested by camera
manufacturer.
Vantage
VIPS2120 501
V2.02.05,
V2.05.12,
V2.06.12
1 MPEG4 0 / 0 - � Type 1
or 3 � - Admin
Tested by camera
manufacturer.
Vantage
VIPS2310Q 501
V2.00.03,
V.2.01.03 1 MPEG4 0 / 0 - - - - - Admin
Tested by camera
manufacturer. Only one
channel or quad view
can be monitored at the
same time.
Vantage
VIPS2410 506 V2.02.06 2 MPEG4 0 / 0 - �
Type 1
or3 � - Admin
Tested by camera
manufacturer.
VCS VideoJet 10 96 2.11 1 JPEG
MPEG4 0 / 1 - � Type 3 -
Two-
Way service
Requires H.263 support.
Only support for PTZ
camera using Pelco-D or
Pelco-P protocol.
VCS VideoJet 400 94 6.10 4 JPEG
MPEG4 4 / 5 - - - - - -
Only one input must be
defined and used,
including Motion and No
video input.
Outputs can only be
used to change view.
VCS VIP 10 96 2.10 1 JPEG
MPEG4 0 / 1 - � Type 3 -
Two-
Way service
Requires H.263 support.
Only support for PTZ
camera using Pelco-D or
Pelco-P protocol.
Veo Observer XT 32 1.2.09 1 JPEG 0 / 0 - � - - - admin -
111 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Verint Nextiva
S1700e 103
4.00m,
4.22d, 4.22i 1 MPEG4 0 / 0 - � Type 3 �
One-
Way admin
PTZ support for Pelco-D,
Pelco-P & JVC TK-C655
Dome PTZ Camera.
Verint Nextiva
S1704e 135 4.22b 4 MPEG4 0 / 0 - � 1 Type 3 � - admin
PTZ Support for Pelco-
D, Pelco-P & JVC TK-
C655 Dome PTZ
Camera.
Verint Nextiva
S1708e 111 4.20f, 4.22b 8 MPEG4 0 / 0 - � 1 Type 3 � - admin
PTZ support for Pelco-D,
Pelco-P & JVC TK-C655
Dome PTZ Camera.
Verint Nextiva
S1712e 163 4.60q 12 MPEG4 0 / 0 - � 1 Type 3 � - admin
PTZ support for Pelco-D,
Pelco-P & JVC TK-C655
Dome PTZ Camera.
Verint Nextiva
S1724e 164 4.60q 24 MPEG4 0 / 0 - � 1 Type 3 � - admin
PTZ support for Pelco-D,
Pelco-P & JVC TK-C655
Dome PTZ Camera.
Verint S1801e 466 2.0.1.132.8
1225 1
JPEG
H.264
2 / 1
(VMD)
Notificat
ion �
Type 1
or 3 �
One-
Way admin -
Verint S1802e 468 2.0.1.127.7
6914 2
JPEG
H.264
2 / 1
(VMD)
Notificat
ion �
Type 1
or 3 �
One-
Way admin -
Verint S1808e 469
2.1.0.169.7
6308,
2.2.0.233 8
MPEG4
H.264
8 / 2
(VMD)
Notificat
ion �
Type 1
or 3 �
One-
Way admin -
Verint S1816e 470 2.1.0.169.7
6308 16
MPEG4
H.264
16 / 4
(VMD)
Notificat
ion �
Type 1
or 3 �
One-
Way admin -
Verint Nextiva
S1900e 103 4.40j, 4.80s 1 MPEG4 0 / 0 - � Type 3 �
One-
Way admin
PTZ Support for Pelco-
D, Pelco-P & JVC TK-
C655 Dome Camera.
Verint Nextiva
S1950e 103
4.62d,
4.80s 1 MPEG4 0 / 0 - � Type 3 �
One-
Way admin
PTZ Support for Pelco-
D, Pelco-P & JVC TK-
C655 Dome Camera.
112 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Verint Nextiva
S1970e 103
4.62d,
4.80s 1 MPEG4 0 / 0 - � Type 3 �
One-
Way admin
PTZ Support for Pelco-
D, Pelco-P & JVC TK-
C655 Dome Camera.
Verint Nextiva
S2600e/S2610e 103 4.80M 1 MPEG4 0 / 0 - - - - - admin -
Verint Nextiva
S2600e-
AS/2610e-AS
103 5.00, 5.00e 1 MPEG4 0 / 0 - - - - - admin -
Verint Nextiva
S2700e 103 4.40i, 4.80s 1 MPEG4 0 / 0 - - - - - admin -
VideoIQ VIQ-CRD
series 326 1.3.1.42034 1 H.264 2 / 14 Poll - - - Out supervisor DVR support.
VideoIQ VIQ-
CT2xx series 326 1.3.1.42034 1 H.264 2 / 14 Poll - - - Out supervisor DVR support.
VideoIQ VIQ-E
series 355 1.3.3.43525 1 H.264
2 / 14
(V) Poll � - - Out supervisor DVR support.
Videology
20N758 184 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Videology
21N758 184 1.23, 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
Videology Server
Board 189 1.31 1
JPEG
MPEG4
0 / 0
(VMD)
Alert
Port � Type 3 -
One-
Way admin
Not supported in a NAT
network
VideoTec Albert
VA01001 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA01002 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA02001 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Albert
VA02002 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
113 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
VideoTec Albert
VA03001 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - - -
VideoTec Albert
VA03002 462 2.0.1 1 H.264
2 / 2
(VMD)
Notificat
ion � Type 3 � - -
Tested by camera
manufacturer.
VideoTec Maximus MPX
IP 463 3.12.13 1
JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative
positioning PTZ cameras using Pelco-
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse 463 3.12.13 1 JPEG
MPEG4
2 / 2
(VMD) Poll �
Type 1
or 3 �
Two-
Way Admin
Support for relative
positioning PTZ cameras
using Pelco-P, Pelco-D
or Dynacolour protocol,
and for absolute
positioning PTZ camera
using Dynacolour
protocol.
114 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
VideoTec Ulisse Compact IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative positioning PTZ
cameras using Pelco-P, Pelco-D or
Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative
positioning PTZ cameras using Pelco-
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
115 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
VideoTec Ulisse IR360 IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative positioning PTZ
cameras using Pelco-P, Pelco-D or
Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
VideoTec Ulisse Maxi IP
463 3.12.13 1 JPEG MPEG4
2 / 2 (VMD)
Poll ���� Type 1 or 3
���� Two-Way
Admin
Support for relative
positioning PTZ cameras using Pelco-
P, Pelco-D or Dynacolour protocol, and for absolute positioning PTZ
camera using Dynacolour protocol. Tested by design using VideoTec
Ulisse.
Vivotek FD6100
series 109 0102b 1 MPEG4 0 / 0 - - - - - root -
Vivotek FD7130 366 0100d 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - root -
Vivotek FD7131 331 0100g 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek FD7132 331 0200f 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
116 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Vivotek FD7141 331 0101b 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek FD7141V 331 0101b 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek FD7160 366 0100d 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - root -
Vivotek IP2121 58 0201c,
0301a 1 JPEG 0 / 0 - � Type 3 - - root
Enable ‘Generic CGI
command on
devicepage.
Vivotek IP2122 58 0100e,
0301d 1 JPEG 0 / 0 - � Type 3 - - root
Enable ‘Generic CGI
command on
devicepage.
Vivotek IP3121 97 0201b 1 MPEG4 0 / 0 - - - - - root Requires H.263 support.
Vivotek IP3122 97
0202d,
0203a,
0204a
1 MPEG4 0 / 0 - - - - - root Requires H.263 support.
Vivotek IP3135 97
0100f,
0100g,
0101c
1 MPEG4 0 / 0 - - - - - root Requires H.263 support.
Vivotek IP6124 109 0101e,
0102f 1 MPEG4 0 / 0 - - - - - root -
Vivotek IP7130 333 0101c 1 JPEG
MPEG4
1 / 0
(VMD) Poll - - -
Two-
Way root -
Vivotek IP7131 155 0100d 1 MPEG4 0 / 0 - - - - - root
Vivotek IP7133 348 0100b 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
Two-
Way root -
Vivotek IP7134 348 0100a 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - -
Two-
Way root -
Vivotek IP7135 155 0202b 1 MPEG4 0 / 0 - - - - - root
Vivotek IP7137 155 0202b 1 MPEG4 0 / 0 - - - - - root
117 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Vivotek IP7138 331 0100k,
0201i 1
JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek IP7139 331 0201b 1 JPEG
MPEG4
1 / 1
(VMD) Poll - - -
Two-
Way root -
Vivotek IP7142 251 0101a 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7151 251 0100h 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7152 251 0200c 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7153 251 0100b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7154 251 0100b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7160 251 0101b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7161 251 0101c 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek IP7251 347 0100f 1 JPEG
MPEG4
1 / 1
(VMD) SMTP - - - - root -
Vivotek IP7330 333 0101c 1 JPEG
MPEG4
1 / 0
(VMD) Poll - - -
Two-
Way root -
Vivotek IP7361 251 0100g 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root
Tested by camera
manufacturer.
Vivotek IP8161 402 0103a 1
JPEG
MPEG4
H.264
0 / 0 - � Type 1,
2 or 3 � - -
Using the ONVIF
Conformant device.
ONVIF will not work
through a NAT router.
Version 1.01 and 1.02
supported.
118 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Vivotek IZ7151 349 0101f 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 3 � - root -
Vivotek MD7530 366 0100f 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - root
Tested by camera
manufacturer.
Vivotek MD7560 366 0100e 1 JPEG
MPEG4
0 / 0
(VMD) SMTP - - - - root
Tested by camera
manufacturer.
Vivotek PT3124 107 0102b 1 MPEG4 0 / 0 - � Type 3 - - root Requires H.263 support.
Vivotek PT7135 158 0201b 1 MPEG4 0 / 0 - � Type 3 - - root
Vivotek PT7137 158 0201d 1 MPEG4 0 / 0 - � Type 3 - - root
Vivotek PZ6122 110
0101d,
0102j,
0103d
1 MPEG4 0 / 0 - � Type 2 - - root -
Vivotek PZ7111 332 0103a 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7112 332 0103b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7121 332 0103a 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7122 332 0103b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7131 332 0100b 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7132 332 0100e 1 JPEG
MPEG4
1 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek PZ7151 349 0101b 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 3 �
Two-
Way root -
Vivotek PZ7152 349 0101b 1 JPEG
MPEG4
1 / 1
(VMD) SMTP � Type 3 �
Two-
Way root -
Vivotek SD6122V 110 0100h 1 JPEG 0 / 0 - � Type 3 - - root -
119 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Device
Name
Hardware
ID
Tested
Firmware
Video
Chan.
Video
Standard
I/O
Channels
I/O
Input
Protocol
PTZ PTZ
Presets
PTZ
Joystick
Support
Audio Login
Account
Notes
Vivotek SD7151 338 0200f 1 JPEG
MPEG4
4 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek SD7313 338 0100h 1 JPEG
MPEG4
4 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek SD7323 338 0100h 1 JPEG
MPEG4
4 / 1
(VMD) Poll � Type 3 �
Two-
Way root -
Vivotek VS2101 58 0201d,
0301g 1 JPEG 0 / 0 - � Type 3 - - root
Enable ‘Generic CGI
command on
devicepage.
Vivotek VS2402 68
02.00,
0202b,
204e, 301b
4 JPEG 0 / 0 - � Type 2 - - root -
Vivotek VS2403 0 0100p 4 JPEG 0 / 0 - - - - - root -
Vivotek VS3100 97/107 0201c 1 MPEG4 0 / 0 - - - - - root Requires H.263 support.
Vivotek VS3102 97/107 0201b,
0201c 1 MPEG4 0 / 0 - � Type 2 - - root Requires H.263 support.
Vivotek VS7100 251 0200c 1 JPEG
MPEG4
1 /1
(VMD) Poll � Type 3 �
Two-
Way root -
WebEye E10 50 1.2.0, 1.2.3 1 JPEG 2 / 0 FTP - - - - admin -
Weldex WDNC-
64072C 365 1.1.9 1 MPEG4 1 / 1 - - - -
One-
Way admin -
Xview AP-400 /
Linudix 81 17.141.24 4 JPEG 0 / 1 - - - - - admin -
Zylotech
IPSmartCAM2 523 0101k 1
JPEG
MPEG4
1 / 1
(VMD) Poll � Type 2 - Out root -
Remarks
120 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Support for the full Vivotek 31xx series & Vivotek 61xx series is implemented, but it has only been tested at Milestone with the devices listed above.
A special firmware for all Vivotek 7000 series is required for Two-Way Audio. The firmware can be acquired from Vivotek if needed.
Pre-alarms on Axis devices might need to be triggered twice for some events before being activated in XPE, XPP or XPB+. Please refer to Axis for
firmware to correct this.
If you are using any of the supported H.264 cameras, please contact Milestone Support to have the latest driver information for these cameras.
The DirectShow driver requires DirectX 9 or later to be installed on the machine. It can be used for local webcams as well as playback of local AVI-files.
To add the DirectShow ‘device’ you should specify 0.0.0.1 as the IP-address and “DirectShow” as the password. Only one instance of the DirectShow
‘device’ can be installed on a server. After installing it the webcam or file is setup in the Image Quality dialog. If you are going to enable a ‘Microphone’
and the corresponding camera has been configured with a webcam please ensure to first choose an audio source in the Image Quality dialog of the camera.
The USB Camera driver requires DirectX 9 or later to be installed on the machine. It can be used for local webcams. The USB driver can autodetect
local USB cameras, but if camera needs to be added manually you should specify 0.0.0.1 as the IP-address and a blank password. Only one instance of
the USB driver can be installed on a server and only one instance of the DirectShow driver and the USB Camera driver can be installed on a server.
Note that USB cameras use a lot of computer processing power because they deliver video in a much more raw data format than dedicated surveillance
cameras. Therefore, do not use more than a couple of USB cameras
The Universal Driver will be able to detect any device that responds to ARP request. For details on setting up a device using the Universal Driver follow
this link: http://www.milestonesys.com/support/technical+support/FAQ/FAQView?id=3365. The Universal Drivers is supported from XPE 6.5f, XPP 6.5b and XPB+ 6.5b.
The Screen Recorder driver is a driver to inconspicuously capture screen recordings of any Windows-based PC or point-of-sale terminal. Get further
information on the Screen Recorder by following this link: http://www.milestonesys.com/products/value_add_products/screen+recorder.
If an IQEye 7xx, 8xx or Alliance camera has it firmware updated to 3.0/9 or newer it will no longer work with the old IQEye driver. To get it to work you
will have to use the Replace Hardware Device wizard to change the driver to the new IQEye Cameo driver.
1 Address ID for PTZ Multi-drop must be set to the same value as the camera number on the Video Server.
2 If the desired frame rate does not work as defined in the administrator image settings. Open a Web page; enter the IP address of the Sony V704 and
browse to the following location: Administrator� Settings� Video� Video Channel� Frame rate. Set the Frame Rate to “Fastest”. Note that the
maximum frame rate available in JPEG mode is 12fps.
3 If events are used on the HikVision DS6101 and DS6104 remember to setup an Event schedule on the device since this cannot be done through the
driver.
121 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
4 Inputs and rules needs to be enabled and setup on the device since this cannot be done through the driver.
5 For PTZ control to work with the Honeywell ACUIXIP the DIP switches on the device must be configured to either software controlled PTZ configuration (Switch 5-8 OFF, recommended) or to Pelco-D.
6 For the Axis Q740x devices the first half of the physical I/O ports are designated for Inputs and the second half for Output. The driver is setting this
up automatically for each port.
I/O Input • Default FTP port: 21
• Default SMTP port: 25
• Default Alert port: 1234
Notes to I/O Channels Column
(A) • Indicates that Audio Events are supported on the device.
(An)
• Indicates that device built-in Analytics Events are supported.
(B) • Indicates that Boot Events (Power lost) are supported on the device.
(C) • Indicates that Crossline detection Events are supported on the device.
(OD)
• Indicates that Object Detection Events are supported on the device. OD is only supported on XPE 6.0a or higher.
(P) • Indicates that pre-alarm is supported on the device.
(S) • Indicates that Shielding Events are supported on the device. (Ta) • Indicates that Tampering Events are supported on the device.
(Te) • Indicates that Temperature Events are supported on the device.
(Tr) • Indicates that Tripwire Events are supported on the device.
(V) • Indicates that Video Loss/Video Resumed Events are supported on the device.
122 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
(Va) • Indicates that Voice Alerts Outputs are supported on the device. Voice Alerts works as Outputs and can be triggered by Events.
(VMD) • Indicates that Camera Video Motion Events are supported on the device.
Notes to PTZ Presets Column
Type 1 • Pan/Tilt/Zoom (PTZ) Preset Positions can be defined in the software; this requires the PTZ camera to be of the so-called "absolute positioning" kind (as
opposed to "relative Positioning"). If the PTZ camera is not of the absolute positioning kind the PTZ Preset Positions will NOT be available. Please
consult the video server manufacturer for more Information.
Type 2
• Pan/Tilt/Zoom (PTZ) Preset Positions can be defined using the built-in web-page in the video server controlling the PTZ Camera or in the PTZ Camera
itself, if it is a network PTZ Camera. The software can utilize these PTZ Preset Positions. In this way PTZ Preset Positions may also be supported for PTZ
cameras of the "relative positioning" kind. Please consult the video server manufacturer for more information.
Type 3
� Pan/Tilt/Zoom (PTZ) Preset Positions can be defined in the software and stored in the PTZ camera. There are a limited number of preset positions available. This way PTZ cameras of the "relative positioning" kind is supported in a more flexible way than with type 2.
Type 3 is only supported on XPE 6.0a or higher, XPP 6.0a or higher and XPB+ 6.0a and higher.
Type 1 & 2 or 1 & 3 • For this video server the software supports both ways of handling PTZ Preset Positions.
Supported transparent PTZ protocols
• Bosch Dome
• Bosch Dome G4
• Discrete 2300
• Dynacolor Absolute
• Dynacolor Relative
• JCBP-S
• Infinova I
• Panasonic CS850
• Pelco-D
123 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Pelco-P
• Pelco-P (6100) (ACTi version of Pelco-P)
• Toshiba PT2000
• ZPan100
Important upgrade note:
It is recommended to backup the configuration file SurvPro2.ini located in the surveillance folder (e. g. C:\Program Files\Milestone\Milestone Surveillance or for
XPE 7.0a and newer in C:\ProgramData\Milestone\Milestone Surveillance) before installing the device pack.
Device Pack changes Changes from Device Pack 5.5 to 5.6
• Added support for new devices and firmware. See the above table.
• Added support for AUX commands on 360 Vision IP Dome.
• Added support for I/O on Sony SNC-CH120.
• Added support for I/O on Pelco Sarix series, Pelco Spectra and Pelco Spectra TBX.
• Added support for Video Resumed event on Axis Q74xx devices.
• Added support for Joystick on the Panasonic BB-HCM5xx devices.
• Added support for Crossline detection on Axis P3343.
• Added support for IPV6, Interlaced field-encoded H.264 and AUX commands in the ONVIF Conformant drivers.
• Improved PTZ handling in the ONVIF Conformant drivers.
• Fixed an issue for Axis M, P and Q devices where rotating an image could cause the images to be black and white.
• Fixed an issue for Axis M, P and Q devices where in certain scenarios an event would no longer work if the name had been changed.
• Fixed an issue where higher resolutions in H.264 did not work for the Arecont AV10005.
• Fixed an issee for Pixord 4xx devices where you might not get images when using XProtect Enterprise 7.0a or newer, XProtect Professional 7.0a or
newer, XProtect Essential or XProtect Go.
Changes from Device Pack 5.4 to 5.5
• Added support for new devices and firmware. See the above table.
• Added PTZ support for Infinova V2500-M Series.
• Added support for Two-Way Audio for IQEye IQD3xx, IQM3xx and IQA3xx devices.
• Fixed an issue for IQEye 732 where the resolution that allowed analog monitoring mode was missing. • Fixed an issue where the Milestone XProtect® Screen Recorder could be added with wrong IP, Port and Username.
124 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Changes from Device Pack 5.3 to 5.4
• Added support for new devices and firmware. See the above table.
• Added support for multiple Audio channels for Bosch VIP X2, VIP X20, VIP X40 and VIP X1600.
• Changed the available PTZ Presets for Agilemesh 100 up to 50 presets.
• Changed the available PTZ Presets for Pelco Spectra mini up to 68 presets.
• Changed the available PTZ Presets for Pelco Spectra IV IP, Spectra IV H.264 and Spectra HD up to 255 presets.
• Arecont Vision drivers now use the HTTP interface instead of the SDK interface.
• Sanyo HD2100, HD2300, HD2500, HD3100, HD3300, HD3500, HD4600, HD5400 and HD5600 have been moved to newest Sanyo framework.
• Fixed an issue for Hunt HWS-04HDW, HLT-87Z and HVT-01HT where adding them without the "<default>" username could cause the Live stream to
fail.
• Fixed an issue for D-Link DCS-3220 where it could not be added due to old WinInet functionality.
• Fixed an issue for ONVIF Conformant Device driver where Management Application could crash when previewing.
• Fixed an issue where Vivotek IP7361 could not be autodetected when using Express mode.
Changes from Device Pack 5.2 to 5.3
• Added support for new devices and firmware. See the above table.
• Added support for PTZ, I/O and Audio on PSIA Conformant Devices.
• Added support for PTZ Type 1 and 3, I/O, VMD and Tampering Events on ONVIF Conformant Devices.
• Added support for Two-Way Audio on JVC VN-V225U and VN-X235U.
• Fixed an issue where Axis P3343 and Axis P3344 was detected on the Axis AreaView driver.
• Fixed an issue for all Dynacolor series where a wrong DNS server entry on device resulted in video stream disconnecting every 1-2 seconds.
• Fixed an issue for UPD IPC and UDP NVE devices where after a while the video stream could disconnect.
• Fixed an issue for JVC VN-C205 where running in below 1 FPS could cause memory leak.
• Fixed an issue for Bosch VideoJet X20 where the wrong Hardware ID was used during detection.
• Fixed an issue for Bosch VIPX1 where PTZ patrolling could stop working when device was rebooted during patrolling.
Changes from Device Pack 5.1 to 5.2
• Added support for new devices and firmware. See the above table.
• Added One-Way Audio support for Pelco Sarix devices.
• Added Output support for Pelco NET5301T, NET5308, NET5316, Spectra IP IV and Spectra Mini IP IV.
• Added Cameo functionality for IQEye 8xx Sentinel and Alliance series.
• Added support for ONVIF version 1.02.
• Added support for Bosch VMD and Input events in the ONVIF driver.
• Fixed an issue in the ONVIF driver where PTZ and JPEG might fail.
125 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue for Toshiba IK-WB11A where Recording Server could hang during restart.
• Fixed an issue where the DirectShow driver could respond with a Parameter incorrect error.
• Fixed an issue for Verint S17xx devices where AUX commands did not work.
• Fixed an issue for Infinova V1749 with Brightness, Saturation, Contrast and Hue.
• Fixed an issue where Bosch NWD455 (Flexidome) devices was detected with the ONVIF Conformant driver instead of the Bosch Dinion/Flexidome
driver.
• Fixed an issue for Sony SNT-EX101 devices where Audio was not enabled.
Changes from Device Pack 5.0 to 5.1
• Added support for new devices and firmware. See the above table.
• Added support for RTSP over HTTP protocol for Axis M, P and Q series devices.
• Added support for Axis PT motor YP3040 for Axis Q1755 and Q1910.
• Added support for Two-Way Audio for Axis P3344, JVC VN-V26 and JVC VN-X35.
• Added support for direct JPEG streaming in the USB and DirectShow driver.
• Fixed an issue for JVC VN-C20 where it was not possible to get a Preview Image stream in the Management Application.
• Fixed an issue for Axis M, P and Q series devices where you might get an Integer error when opening the Video Properties.
• Fixed an issue for Sanyo VCC-HD4600, HD5400 and HD5600 where PTZ functionality reacted slowly.
• Fixed an issue for IQ Eye IQD3x where the resolution always got set to 1280x720.
• Fixed an issue for Arecont AV3130 where default quality settings resulted in not getting a stable stream.
• Fixed an issue where it was not always possible to add Pelco Sarix IE series devices.
• Fixed an issue where Sony SNC-P1, SNC-CS10, SNC-CS11, SNC-DF40 and SNC-DF70 devices could periodically ask for a JPEG stream when MPEG4
stream was selected. This was seen on overloaded networks or networks with bad connections.
Changes from Device Pack 4.9 to 5.0
• Added support for new devices and firmware. See the above table.
• Added support for Input and Tampering events for Honeywell HD3MDIP and HD3MDIPX.
• Added Two-Way Audio and I/O for Mobotix devices.
• Fixed an issue for IQEye devices where if Audio was not enabled on the device webpage it could cause disconnections in the Video Stream.
• Fixed an issue where if the CPU was loaded at 90-100% the Johnson Controls could cause the Recording Server to crash.
• Fixed an issue where all events disappeared in XProtect Enterprise 7.0 when the first event was selceted for the following device:
o Sony SNC-P1, SNC-CS1x, SNC-DF40, SNC-DF70, SNC-DS20, SNC-DS60, SNC-CS20, SNC-CM120, SNC-DM110 and SNC-DM160
o Etrovision EV3130 and EV6230
o All Eyeview devices.
126 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Changes from Device Pack 4.8 to 4.9
• Added support for new devices and firmware. See the above table.
• Added DVR support for Johnson Controls devices.
• Added support for I/O and PTZ on Johnson Controls devices.
• Added DVR support for VideoIQ VIQ devices.
• Added support for Crossline detection events for Axis P3301.
• Fixed an issue on the Axis M, P and Q series devices where time stamps on Pre-alarm images did not match system time.
• Fixed an issue on the Axis M, P and Q series devices where if RTSP was set to another port than 554, no video was received.
• Fixed an issue where the DirectShow camera driver could not stream images in the XPE 7.0 Management Application and Recording Server at the same
time.
• Fixed an issue on the Barix Barionet where if 2 Inputs where active at the same time they interfered with each other.
• Fixed an issue with PTZ on ACTi that could cause loss of PTZ functionality after some time or crash of Recording Server in extreme cases.
• Fixed an issue on HikVision DS6104 where Microphone in some situations did not work.
• Fixed an issue on Sony SNC-Rx series cameras where H.264 failed on wireless networks.
Changes from Device Pack 4.7 to 4.8
• Added support for new devices and firmware. See the above table.
• Added support for new Keep-alive sockets in Universal and Universal 16-channel drivers.
• Added support for H.264 for Bosch devices running firmware 4.0 or newer.
• Added support for new I/O API for Bosch devices running firmware 4.0 or newer.
• Added support for H.264 for Optelecom Siqura C-60.
• Added support for H.264 for Panasonic BB-HCM700 series.
• Fixed and issue in the RTP and RTSP protocol that could cause the Recording Server to hang. Affected devices are:
o 360 IP Vision Dome
o Apro Technology H1000 series
o Cisco IPC series
o Darim Vision PVE400
o HikVision DS-2CD7x2 and DS-2CD8x2 devices
o HikVision DS-6101 and DS-6104 devices
o HikVision DS-2DF devices
o Honeywell ACUIX IP devices
o Honeywell HCx554 devices
o Panasonic WV-Nx502 devices
o Pelco ID series
127 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
o Pelco IM series
o Pelco IX series
o Provideo SD-705 devices
o Siemens CC devices
o UDP devices
• Fixed an issue where MPEG4 did not work for Panasonic WJ-NT304.
• Fixed an issue for Hunt HLV-1CAD where H.264 could fail when Variable bitrate was selected.
• Fixed an issue with PTZ for Vivotek VS7100.
• Fixed an issue for Verint S17xx that could cause the CPU to reach 100% usage when using XPE 7.0.
• Fixed an issue where HikVision DS-2CD7x2, DS-2CD8x2, Basler BIP series and Sanyo HD4000 could not autodetect when an invalid DNS server was
specified on the XPE server.
• Fixed an issue where PTZ did not work for and PTZ Presets could not be retrieved ACTi ACM-8201.
• Fixed an issue for HikVision DS-2CD7x2 and DS-2CD8x2 frequently created a "Failed to provide Image" error.
• Fixed an issue where the incorrect FPS was set for the Vivotek IP7161.
• Fixed an issue for Axis P5534 where PTZ commands was reversed when rotation was set to 180.
Changes from Device Pack 4.6 to 4.7
• Added support for new devices and firmware. See the above table.
• Added support for JPEG, I/O, VMD Events and Two-way Audio for ACTi devices running Streaming mode V2.0.
• Added support for multiple Microphones and Speakers on ACTi devices with multiple Audio In and Audio Out.
• Fixed and issue in the RTP and RTSP protocol that could cause the Recording Server to hang. Affected devices are:
o Axis M series
o Axis P series
o Axis Q series
o Sony EP series
o Sony EX series
o Sony Rx devices
o Toshiba Teli CI8x10 devices
o The new Vivotek 7000 drivers.
• Added support for the new Bosch I/O API from Firmware 4.0.
• Added support for more Inputs and Outputs on the Barix Barionet when chaining devices.
• Added TCP support for Panasonic WV-NF302, WV-NP304, WV-NS950, WV-NS954, WV-NW960 and WV-NW964.
• Added H.264, Absolute PTZ and PTZ Preset Type 3 functionality to ONVIF driver.
• Added Digest authentication for PSIA driver.
• Fixed an issue where the Recording Server could crash when daisy chaining analog PTZ devices to one COM port on a Multi-channel Video Server.
• Fixed an issue in the Universal Driver where if a MPEG4 stream did not contain a value in a=fmtp line the RTP module couldn’t start a stream.
128 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue for Sony SNC-RZ50 where speed support was missing for PTZ controls with Joystick.
• Fixed an issue for Sony SNT-EP154 and SNT-EX154 where a global lock could cause connections times up to ten minutes.
• Fixed an issue where the Vivotek PZ7112 could not be added.
• Fixed an issue where Bit rate could not be set on single channel Arecont Vision cameras.
• Fixed an issue where Downsample Factor could not be set on Arecont Vision cameras.
Changes from Device Pack 4.5 to 4.6
• Added support for new devices and firmware. See the above table.
• Arecont Vision drivers now use the Arecont Vision SDK interface instead of the HTTP interface.
• Added support for authentication for the Basler BIP series, which is available on newer firmwares.
• Added Audio support for the Etrovision EV3131A.
• Added I/O support for Arecont Vision devices.
• Added support for H.264 on the Arecont Vision AV8185 and AV8365.
• Fixed an issue in H.264 for Sanyo VCC-HD4000.
• Fixed an issue in the RTP component for the Universal drivers.
• Fixed an issue where a Basler BIP device could crash the Administrator during autodetect or manual detect.
• Fixed an issue for VideoIQ VIQ where H.264 FPS could be unstable when running at 30 FPS.
• Fixed an issue where Dynacolor Diva devices could get a lot of connection errors when using MPEG4 and H.264 codecs.
• Fixed an issue where some Panasonic devices could have issues if using other than default admin user.
• Fixed an issue with HikVision DS-6101 where if Administrator was opened while Recording Server is running the Administrator could hang when closed.
• Fixed an issue where the network queue size was increased for the Toshiba Teli CI8x10D devices.
• Fixed an issue where the Recording Server might hang when devices stopped responding while using RTP or RTSP protocol.
Changes from Device Pack 4.4 to 4.5
• Added support for new devices and firmware. See the above table.
• Added support for transparent PTZ protocol on Optelecom devices. Presets type has changed to Type 3 and Joystick is now supported on C-50 and S-
50. • Added Audio Out support on Panasonic WJ-NT304, WV-NF302, WV-NP304, WV-NS950, WV-NS954, WV-NS960 and WV-NS964.
• Added Audio Out support on Samsung Techwin SNC-550, SNC-570, SND-460V, SND-560, SNP-1000(A), SNP-3300(A), SNS-100 and SNS-400.
• Changed detection scheme for Pelco devices so UPnP is only used if known IP is no longer valid.
• Joystick support improved for all Canon VB-C devices.
• Fixed an issue where IQEye 7 series and 8 series displayed H.264 codec on newer firmwares although not supported.
• Fixed an issue where IQEye cameras could lose connection at low FPS in either live or recording.
• Fixed an issue with Day/Night settings for Sony SNC-C20.
129 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue on Johnson Controls DVN5008 where connection could be lost if the corresponding audio channel was enabled in XPE but disabled on the
device.
Changes from Device Pack 4.3 to 4.4
• Added support for new devices and firmware. See the above table.
• Added PTZ support for Vivotek IP2121, IP2122 and VS2101.
• Added support for Bosch Autodome and Panasonic C850 PTZ Protocols on the VCS VIP 10.
• Changed Axis 214, 215, 216, 221, 223, 225, 231, 232, 233, 24xQ and 24xSx series drivers to no longer include WinInet functionality. WinInet could
cause problems with detection on some systems.
• Fixed an issue with PTZ speed when using Coaxitron and Extended Coaxitron on the Pelco NET5308 and NET5316.
• Fixed an issue for ACTi and ACTi OEM’s where the device would not go to the same preset twice in a row.
• Fixed an issue where resolutions were not always set on the Appro LC-7226.
• Fixed an issue for Stardot Netcam SC where sometimes the Image Quality dialog did not open.
• Fixed an issue for Basler BIP drivers where Output pulse length could not be controlled.
Changes from Device Pack 4.2 to 4.3
• Added support for new devices and firmware. See the above table.
• Added streaming mode TCP tunneled for all Arecont AVxxx5 cameras.
• Added H.264 support for all Basler devices.
• Added MPEG4 support for the Canon VB-C60 device.
• Added I/O and VMD support for Panasonic WJ-NT304, WV-NF302, WV-NP304, WV-NS95x and WV-NS96x devices.
• Added MPEG4 support for Samsung Techwin SND570 and SNC560.
• Changed Axis 209, 212 and 213 series drivers to no longer include WinInet functionality. WinInet could cause problems with detection on some
systems.
• Fixed an issue where Date and Time was not set on the Axis 212 when set in the Administrator.
• Fixed an issue where some MPEG4 settings were not disabled when JPEG was selected for Axis 209, 212 and 214.
• Fixed an issue with a memory leak on the Optelecom Siqura C-50.
• Fixed an issue where the Axis 2401 always showed 1Kb as image size.
• Fixed an issue where “Enable fisheye” were no longer automatically set when adding an iPIX device.
• Fixed an issue where Sony SNC-5xx devices could periodically ask for a JPEG stream when MPEG4 stream was selected. This was seen on overloaded
networks or networks with bad connections.
• Fixed an issue where events could be “inverted” on IQEye cameras if Recording Server was restarted while events were active.
Changes from Device Pack 4.1 to 4.2 • Added support for new devices and firmware. See the above table.
130 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Added I/O and VMD support for Bosch Dinion devices and VMD support for Bosch Flexidome devices.
• Added Audio support for JVC VN-V685 and VN-V686B.
• Added H.264 support for IQEye Alliance series cameras.
• Changed IQEye driver to no longer include WinInet functionality. WinInet could cause problems with detection on some systems.
• Changed Axis 206, 207, 210, 211 and 282+ series drivers to no longer include WinInet functionality. WinInet could cause problems with detection on
some systems.
• Fixed an issue where Samsung SNC-B5395 in rare cases could crash Recording Server.
• Fixed an issue where some Panasonic might experience timeouts when doing PTZ at low bitrates.
• Fixed an issue with incorrect FPS on Sony SNT-V704.
• Fixed an issue where IQEye cameras with lower case ‘iq’ model names are also detected.
• Fixed an issue where a system might have problems running more than one Basler BIP device.
• Fixed an issue where Input 2 did not work on Axis Q7401.
Changes from Device Pack 4.0 to 4.1
• Added support for new devices and firmware. See the above table.
• Added support for Two-way Audio on Canon devices.
• Added support for H.264 on the Sony SNC-RZ50.
• Fixed an issue in the RTSP module which could cause stuttering in the Audio and Video streams.
• Fixed an issue where Input 2 did not work for Canon VB-C50.
• Fixed an issue where some Axis devices could not change resolutions.
• Fixed an issue with cropped images on Arecont devices.
• Fixed an issue where the Axis 214 and 215 could get an Out of memory error in the Administrator when running MPEG.
Changes from Device Pack 3.9 to 4.0
• Added support for new devices and firmware. See the above table.
• Added support for PTZ scanning on Axis devices.
• Added support for the username:password format on Axis devices.
• Added support for One-Way and Two-Way Audio on Bosch devices.
• Added TCP support for Arecont H.264 devices.
• Changed to UDP and TCP Unicast instead of Multicast on Verint S1704, S1708, S1712 and S1724.
• Fixed an issue where the resolution value for IQEye device was not reset to minimum value if the entered value was lower.
• Fixed some issues with PTZ for Canon VB-C50 and VB-C300.
Changes from Device Pack 3.8 to 3.9 • Added support for new devices and firmware. See the above table.
131 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Added support for H.264 for Sanyo VCC-9x00, VCC-HD4000, VCC-XZ600, VCC-XZN600, VCC-ZMN600 and VCC-ZM600 (H.264 only supported in XPE
6.5d and newer).
• Added TCP support for the Axis P3301.
• Changed to UDP and TCP Unicast instead of Multicast on Verint S1700, S19x0, S26x0 and S2700.
• Fixed some issues with PTZ for the Samsung Techwin SNS400 and Samsung Techwin SNS100.
• Fixed an issue where not all MPEG FPS was supported for the Samsung Techwin SNS100.
• Fixed an issue where Japanese versions of some Panasonic devices were not detected.
• Fixed an issue where the installer could ask to convert PTZ presets if the older device pack was uninstalled first.
Changes from Device Pack 3.7 to 3.8
• Added support for new devices and firmware. See the above table.
• Added support for H.264 for Axis P3301 and some Arecont devices (H.264 only supported in XPE 6.5d and newer).
• Added audio support for VCS VideoJet10, VCS Vip10 and Pelco NET350.
• Added new smoother PTZ joystick functionality for most Axis, All Bosch, All VCS, and the Pelco NET350 devices.
• Added support for Sony’s new fast PTZ on SNC-RX5x0 devices and the smoother PTZ functionality. (The Sony RX5x0 demands firmware 2.30 or 3.00
and Sony’s new PTZ hardware.)
• Added support for UDP streaming for VCS VideoJet10, VCS Vip10, Pelco Net300 and Pelco Net350.
• Fixed an issue where the Axis PTZ Control Queue was not disabled on some devices causing PTZ to not work.
• Fixed an issue where getting a Preview Image from an unconnected JVC VN-V25 or VN-V26 could cause infinite wait.
• Fixed an issue where Mobotix devices running in Japanese language mode could not be connected.
• Fixed an issue where the Toshiba Teli EJ7000 was set as MPEG4 mode even though running in JPEG mode.
• Fixed an issue where Audio Out could be delayed on the Panasonic WV-NS202.
• Fixed an issue with PTZ for Axis 215.
• Fixed an issue with speaker being shown for Axis 207W device although not supported.
• Fixed an issue in core components that could cause crashes in special circumstances.
• Fixed an issue where Focus Near Start and Focus Stop had switched functionality on devices using transparent Pelco-D protocol.
• Fixed an issue for Sony SNC-CS10, SNC-CS11, SNC-DF40, SNC-DF70 and SNC-P1 where it was not always possible to change to MPEG4.
• Fixed an issue where in some circumstances the wrong drivers were installed in the wrong directory if both XPE and XPCO are installed on the server.
Changes from Device Pack 3.6b to 3.7
• Added support for new devices and firmware. See the above table.
• Added support for Image Flip option on Toshiba IK-WB15A and IK-WB21A.
• Fixed an issue where the JVC VN-V686 could move beyond 90 degrees when using Click-to-Center. This should only be possible when using Joystick or
PTZ buttons.
• Fixed an issue where Microphone (Audio In) was missing for the Sony SNT-V704.
• Fixed an issue with image delay at low FPS on the Vivotek 21xx devices.
132 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue where the FPS was not set correctly for Vivotek VS2403.
• Fixed an issue where PTZ movement with Joystick was the same at all zoom levels for the Canon VB-C300.
• Fixed an issue where channel 2 on the Panasonic WJ-TN304 only showed 1 FPS regardless of setting.
Changes from Device Pack 3.6 to 3.6b
• Fixed an issue where FPS was set to 25 for all Axis devices running MPEG in existing configuration.
• This fault only exists on Device Pack version 3.6 – older Device Pack versions do not have this problem.
Changes from Device Pack 3.5 to 3.6 • Added support for new devices and firmware. See the above table.
• Added support for cropping for Arecont devices.
• Added Two-way Audio support for Axis 213 instead of One-way Aduio.
• Fixed an issue where wrong bitrate selection was shown for ACTi ACM-4200 and ACM-5600 series.
• Fixed an issue where Panasonic BB-HCM5xx cameras could become unstable at 1 FPS with some resolutions.
• Fixed an issue where some Sony and Axis devices could leak memory during PTZ operation.
Changes from Device Pack 3.4 to 3.5 • Added support for new devices and firmware. See the above table.
• Added PTZ support for Panasonic WV-NT304.
• Added One-Way Audio, Motion event and I/O support for Canon VB-C50 and VB-C300 cameras.
• Added specific resolutions support for all ACTi devices.
• Added Click-to-center support for the JVC VN-V686.
• Added rotation capability for Axis 216FD/MFD.
• Added support for username and password with the newer firmware for Arecont devices.
• Fixed an issue where Speaker (Audio Out) could be missing for Axis 207, 210 or 211 devices.
• Fixed an issue where if a device is already added to the system, new audio abilities were not listed.
• Fixed an issue where adding I/O on multiple JVC VN-25/V26 cameras resulted in only I/O on the first camera was working properly.
• Fixed an issue with JVC VN-C625/C655 where after a camera reboot I/O stopped working.
• Fixed some issues with PTZ and PTZ Presets for the JVC VN-V686.
Changes from Device Pack 3.3 to 3.4 • Added support for new devices and firmware. See the above table.
• Added support for Axis Special events Audio alerts, Boot, Temperature, Tampering and Video Loss. See the above table.
133 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Added help for White Balance objects for the JVC VN-V25 and VN-V26.
• Added Image rotation for the AgileMesh-100.
• Added UDP support for Bosch VIP X devices, Bosch VG4, Bosch Dinion and Bosch Flexidome.
• Fixed an issue where PTZ did not work on Bosch VG4 series.
• Fixed an issue where Sony SNC-RZ25 did not zoom correctly.
• Fixed an issue where FPS on AgileMesh-100 was not always correct.
• Fixed an issue where the Toshiba Teli EJ7000 could possibly crash.
• Fixed an issue with zoom via joystick on the Sony SNC-RZ25.
• Fixed an issue where the Panasonic WV-NS202 had problems reconnecting after having lost connection.
• Fixed an issue where Input 9-12 did not work on the ADAM 6050
Changes from Device Pack 3.2 to 3.3
• Added support for new devices and firmware. See the above table.
• Added support for two-way Audio on some Axis and Sony devices. See the above table. (Two-way Audio only supported from XPE 6.5 and up).
• Added support for MxPEG with Audio for some Mobotix devices. See the above table.
• Added support for RTSP Authentication on Digimerge DNS1010.
• Fixed an issue with PTZ not working correctly on Digimerge DNS1010.
• Fixed an issue where PTZ did not work on Bosch VG4 Series.
• Fixed an issue where Area zoom did not work for Sony SNC-RZ25, SNC-RZ50 and SNC-RX550.
• Fixed an issue with JVC VN-C625 where you could run out of alarms when restarting the Recording Server.
• Fixed an issue with Pelco Camclosure IP110 where you could not get live images when running XPE as a service.
• Fixed an issue where Audio stopped after 2 minutes on the Panasonic NP244/NP1000 series.
• Fixed an issue with ACTi 2310Q and 2320Q where Audio was missing.
• Fixed an issue with Mobotix D12 and M12 where brightness was not set on the left camera.
Changes from Device Pack 3.1 to 3.2
• Added support for new devices and firmware. See the above table.
• Fixed an issue with resolutions on the Vivotek 3xxx series.
• Fixed an issue with importing presets with + sign on Axis devices.
• Fixed an issue where PTZ presets for the Panasonic NS202 did not always work in the Smart Client.
• Fixed an issue with joystick control on Sony SNC-RZ25.
• Fixed an issue where no live images were shown if running a different port than 80 on APPRO devices.
• Fixed an issue where the Sony SNC-P5 sometimes missed the PTZ Preset Positions button in Settings dialog.
• Fixed an issue where patrolling with Sony or Axis devices would make the drivers run out of ports and then disable all PTZ functionality for the devices.
• Fixed an issue for Sony SNC-RZ50 and SNC-RX550 where click-to-center was not accurate.
• Fixed an issue where Axis 2400/2401 kept losing connection when Audio was enabled.
134 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue where audio was distorted when using Axis 2400/2401 and 2491 Audio Module.
• Fixed an issue where it was possible to set scan speed on patrolling on an Axis 233D which caused patrolling to fail.
• Fixed an issue where Sony SNC-DF50 did not deliver correct FPS in MPEG mode.
• Fixed an issue where JVC VN-C655 could not be used through a router/NAT.
• Fixed an issue for IQEye devices where the shown FPS sometimes was lower than the requested FPS.
• Fixed an issue with connecting to an ADAM 6060 from multiple Smart Clients.
• Fixed an issue with not getting images from Panasonic BB-HCM500 series when the devices was added with username:password option.
Changes from Device Pack 3.0 to 3.1 • Added support for new devices and firmware. See the above table.
• Added Audio support for ACTi devices. Only one Audio channel supported per device.
• Added support for RTSP Authentication for Vivotek 71xx devices.
• Fixed an issue with Dynacolor absolute protocol on ACTi devices where PTZ always rotated right when panning.
• Fixed an issue with Dynacolor absolute protocol on ACTi devices where PTZ presets would not be defined.
• Fixed an issue with Bosch and VCS devises where camera could not be added if the Live account had a password.
• Fixed an issue for IQEye cameras where it was possible to set an unsupported downsample factor which resulted in not getting images.
• Fixed an issue for Sony SNC-RZ50 where you could only select JPEG FPS from dropdown box.
• Fixed an issue for Sony SNC-RZ50 where scanning speed was always the same when patrolling.
• Fixed an issue where Recording Server could not startup if driver dll were missing.
• Fixed an issue with Bosch devices where device could not be added when Live account had password.
• Fixed an issue with Arecont AV3130 where Image quality was reset to low when high was selected.
• Fixed an issue with IQEye devices where setting an unsupported downsample factor resulted in Image failure.
• Fixed an issue where change of polling interval did not work for Sony SNC-RZ30.
• Fixed an issue with Axis 241S where Bosch dome camera could not be focused using joystick.
• Fixed an issue where Bosch VG4 Dome was not setup as PTZ camera by default.
• Fixed an issue with Axis 212 where PTZ presets could not be imported.
• Fixed an issue where the ACTi SED-2600 device could cause the Recording Server to crash.
• Fixed an issue where the zoom slider did not work for Panasonic NS202.
Changes from Device Pack 2.9 to 3.0 • Added support for new devices and firmware. See the above table.
• Added support for absolute PTZ positioning through the Dynacolor absolute protocol for ACTi devices.
• Included a conversion tool for Axis absolute PTZ preset position values. Please see the upgrade note above.
• Fixed an issue with several Vivotek 71xx cameras not being able to be viewed at the same time.
• Fixed an issue with Arecont AV3130 where image settings set to ‘high’ switched to ‘low’.
• Fixed an issue where more FPS than requested was recorded for IQEye cameras.
135 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue with TCP streaming for the Samsung SNT-1010.
• Fixed an issue with PTZ Preset positions on dev. pack 2.9 for the Sony RZ25.
• Fixed an issue for the Axis 241Q, where only 1 COM port could be configured.
• Fixed an issue for Axis 2400 and 2401, freezing the administrator when entering the PTZ Preset dialog.
• Fixed an issue for Panasonic 202, where the PTZ Zoom scale was not working on dev. pack 2.9
• Fixed an issue for Panasonic 240 and 244, where images could not be retrieved when audio was enabled on cameras with firmware 1.23 installed.
• Fixed an issue on Canon VB-C50i with frames being skipped
Changes from Device Pack 2.8 to 2.9 • Added support for new devices and firmware. See the above table. • Added support for installing device packs in root directory. • Improved joystick PTZ functionality with XProtect 6.0d and SmartClient 3.0d for AXIS devices that support PTZ with joystick, Sony RX550 and
Panasonic NS202.
• Fixed an issue where only one Sanyo DP9585 camera at a time could receive images. • Fixed an issue with PTZ presets on a Bosch VIP X1 with a Bosch dome. • Fixed an issue where only 8 presets from Panasonic BB-HCM cameras were imported. • Fixed an issue with Axis MPEG4 and running with a port different from 80.
Changes from Device Pack 2.7 to 2.8 � Added support for new devices and firmware. See the above table.
� Added support for 4CIF/D1 interlaced resolutions for Bosch devices. This works from XPE 6.0b and up.
� Added support for TCP 2.0 for the ACTi 23x0Q series.
� Fixed an issue with the Axis 2191 sound module not supported in XPE 6.0 for AXIS 2100, 2110, 2120, 2400/2400+, 2401/2401+.
� Fixed an issue with not being able to detect Pixord 400/1401, when users were defined on the device.
� Fixed an issue on JVC VN-E4, with problems updating the camera settings correct for channels 2, 3 and 4.
� Fixed an issue with the Sony RZ30/2, with not being able to retrieve images..
� Fixed an issue with the Sony RZ30/2 and RZ20 not working in Monitor when User Access Right set to level 1.
� Fixed an issue with the Panasonic NP-244, with not being able to receive images.
� Fixed an issue with not being able to detect Axis 231D+.
� Fixed an issue with not being able to detect Lumenera cameras if users had edited the ‘description’ property in the camera API.
� Fixed an issue with missing audio on Axis 241QA.
� Fixed an issue with Axis, Panasonic and Sony devices where Audio was not enabled on webpage when enabled in XPE.
� Fixed an issue with the Hue slider for the Verint S1700, S19xx and S2700 video servers.
Changes from Device Pack 2.6 to 2.7
136 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Added support for new devices and firmware. See the above table.
• Added Audio support for Panasonic BB and BL series.
• Added Support for Object Detection (OD) events on Sony devices.
• Added support for MPEG and VMD on the Panasonic NP series.
• Fixed an issue with audio not supported for Axis 212PTZ.
• Fixed an issue with Monitor reload problem for Samsung SCC-C6475.
• Fixed an issue with wrong FPS in MPEG4 for Sony RX550.
• Fixed an issue with getting same picture on all channels when running 1 FPS on Vivotek 2402.
• Fixed an issue with PTZ not working on Axis 214 if “PTZ Control Queue” set on camera webpage.
• Fixed an issue with text overlay getting appended on Vivotek 2402.
• Fixed an issue where it was impossible to add Axis 2100, Axis 2120, Axis 2401 OSYS and Sony V304 when running IE7.
• Pre-alarm post images are not supported.
Changes from Device Pack 2.5 to 2.6 • Added support for new devices and firmware. See the above table.
• Fixed an issue where GoTo Event on an AXIS PTZ that does not respond caused the Monitor to crash.
• Fixed an issue where changing from MPEG to MJPEG on an AXIS 241Q caused the Monitor to crash.
Changes from Device Pack 2.4 to 2.5 • Added support for new devices and firmware. See the above table.
• Added audio support for the AXIS 214 camera.
• Added support for optical (1x, 1.5x, 2x, 2.5x) and digital (3x) zoom functionality on the Panasonic NP240/244.
• Added support for PAL and help on the Sony SNC-CS50.
• Added support for I/O events on the Sony V704.
• Fixed an issue where AXIS devices would loose connection on speed up on motion.
• Fixed an issue where some AXIS and Sony Devices could leak handles during multiple disconnect/reconnections.
• Fixed an issue where the image stream on the Mobotix M10M stalled for 2-3 seconds at short intervals.
• Fixed an issue where the PTZ home button on the Sony R25 did not return to the correct value.
• Fixed an issue where the Panasonic NP244 could not be auto detected.
• Fixed an issue on the WebEye E10 where there was a buffer delay when the frame rate was below 5FPS.
Changes from Device Pack 2.3 to 2.4 • Added support for new devices and firmware. See the above table.
• Added Joystick support for PTZ control on the ACTi CAM-6110
• Added support for camera VMD events on many AXIS devices. See the above table.
137 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Added support for PTZ on Verint Smartsight S1700 / S1708.
• Fixed an issue where the Vivotek 6xxx PTZ could crash the monitor.
• Fixed an issue where the D-Link, Vivotek and Verint S1700 devices had gaps in the video stream.
• Fixed an issue where the Pixord 4000 was unable to import PTZ preset positions.
• Fixed an issue where the NetServer6 caused the Monitor to crash when starting.
• Fixed an issue where the Sony DF40 / DF70 could not retrieve MPEG4 images when viewer authentication was enabled on the device.
• Fixed an issue where Sony devices did not refresh monitor images when the frame rate was set to 1 frame per minute.
Changes from Device Pack 2.2b to 2.3
• Added support for new devices and firmware. See the above table.
• Added support for Patrolling on AXIS 231D
• Fixed an issue where search in F1 help could cause the monitor to stall if MPEG4 devices where used.
• Fixed an issue where the monitor could stall when reloading it while one of the following devices had lost its connection: AXIS 207, 210, 210A, 211,
211A, 213, 221, 231, 240Q, 241Q, 241QA, 241S and 241SA.
• Fixed an issue where Videojet 400 could crash the monitor in rare situations when decoding bit stream data with certain data properties.
• Fixed an issue where Preset positions on Vivotek 6122 failed to work if the preset name contained a space.
• Fixed an issue where PTZ did not work on AXIS 213, 231D, 240Q, 241Q, 241QA, 241S and 241SA with firmware 4.30 if PTZ control queue was enabled.
Changes from Device Pack 2.2 to 2.2b • Fixed an issue where camera PTZ settings were not accessible on AXIS 240Q, 241Q, 241QA, 241S and 241SA video servers.
• Fixed an issue where PTZ were enabled as default on AXIS 240Q, 241Q, 241QA, 241S and 241SA video servers that had no previous PTZ configuration.
When upgrading from Device pack 2.2 to 2.2b, PTZ must be disabled manually on these video servers if PTZ is not used.
Changes from Device Pack 2.1 to 2.2 • Added support for new devices and firmware. See the above table.
• Added support for audio on AXIS 241QA & AXIS 241SA.
• Added support for MPEG4 on additional AXIS Cameras.
• MPEG4 streaming method has been changed to reduce latency/delay. This improvement is only visible with Enterprise 5.6a.
• Improved quality of MPEG4 on AXIS 207.
Changes from Device Pack 2.0 to 2.1 • Added support for new devices and firmware. See the above table.
• Added support for MPEG on several AXIS devices. See the above table.
138 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• ACTi 2100R and 5100H: Updated to support firmware A1D-P0V-V1.02.02-AC only.
• ACTi 2100S and 5100S: Updated to support firmware A1C-P0V-V1.02.02-AC only.
• Joystick support introduced for JVC VN-C625U, JVC VN-C655U and Panasonic
NS320 series
• I/O support introduced for Panasonic BB-HCM series using Enterprise 5.5d or newer.
• Push mode streaming support introduced for Panasonic NP472, Panasonic NW470 and Panasonic
NS320 series.
• Output support introduced for VCS VIP10.
• Pre Alarm introduced for the following devices: AXIS 207/210/210A/211/211A/221/231D/232D/241S/241SA.
• Fixed an issue where event inputs did not work if a space was used in the event name for the following devices: AXIS
210/211/211A/213/221/231D/232D/240Q/241Q/241QA/241S/241SA
• Fixed an issue where only the first 10 preset positions could be imported on AXIS 213/241S/241Q.
• Fixed an issue where cameras could not be detected if German language interface was used for Mobotix M10/M1M and M10M.
Changes from Device Pack 1.9 to 2.0 • Added support for new devices and firmware. See the above table.
• Fixed an issue on ACTi 2100R where lost connection to the device could cause the camera to hang in the Monitor.
• Fixed an issue on ACTi 2100R where the Monitor sometimes incorrectly reported “Cannot retrieve serial number” when more than one ACTi device was
on the network.
• Login account is changed for the ACTi devices from ‘admin’ to ‘Admin’.
• Fixed an issue on Toshiba IK-WB01A where the Monitor could crash if the device delivered corrupt data.
• Fixed an issue on Verint SmartSight S1700 where reconnection after lost connection did not work.
• Fixed an issue on Verint SmartSight S1700 where the Administrator could crash if image settings were adjusted while connection to the device was lost.
• Fixed an issue on VideoJet400 where reconnection after lost connection sometimes did not work.
• Fixed an issue on D-Link DCS-5300 where the image size displayed in Administrator preview was not correct.
• Fixed an issue on D-Link devices and Vivotek VS3102 where the Monitor could not retrieve images if audio was muted. The mute state is now changed
if audio is muted when connecting to the device.
• The Vivotek VS3102 driver has been replaced with two new drivers “Vivotek 3xxx” and Vivotek 3xxx with PTZ”. “Vivotek 3xxx” supports Vivotek IP3122
and Vivotek VS3102 without PTZ enabled. The “Vivotek 3xxx with PTZ” supports Vivotek VS3102 with PTZ enabled. When the Vivotek VS3102 device is
added to the Administrator, it is automatically detected if PTZ is enabled or disabled and the correct driver is selected. If PTZ option is changed on the
device after it has been added to the Administrator, it is required that the correct driver is manually selected.
• Support for FLIR Alarms in the FLIR 241S driver.
Changes from Device Pack 1.8 to 1.9
• Added support for new devices and firmware. See the above table.
• Fixed an issue with the sliders in PTZ Preset Positions setup on AXIS 213.
139 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
• Fixed an issue on AXIS 213 and AXIS 240Q/241Q/241AQ where not all preset positions were imported.
• Fixed an issue on AXIS 2400/2400+ and AXIS 240Q/241Q/241AQ with zoom level in preset position.
• Fixed an issue on the Pixord 2000 where the I/O operation sometimes did not work.
• Fixed an issue with handling of large images on the JVC C625/C655.
Changes from Device Pack 1.6 to 1.8 • Added support for new devices and firmware. See the above table.
• The Device Pack can now find the installation folder automatically.
• Fixed some issues with setting the image quality on the Pixord 1000, 2000 & 4000.
• Fixed an issue on the Pixord 4000 where the I/O operation sometimes did not work.
• Fixed some issues with setting the image quality and resolution on the IQeye series cameras.
• Some of the AXIS driver names have been changed to match the new supported devices.
Changes from Device Pack 1.2 to 1.6
• Sony SNC-RZ30: Fixed password problem when using PTZ. Added snapshot mode.
• Canon VB-C10: Now handling PAL and NTSC resolutions correctly.
• Panasonic NW470: Handling different resolution in NTSC/PAL versions.
• Convision V600/V700: Updated to support firmware 5.4.2 only.
Changes from Device Pack 1.1 to 1.2 • Baxall X-Stream: I/O Inputs is now named “MXP_*” instead of “ACR_*” when viewing the I/O configuration in the device.
• The iPIX driver now displays the correct resolutions that are supported by the different iPIX camera models.
• Speedup on motion and event is now working correctly for the following devices: AXIS 241Q, AXIS 241S, AXIS 213, AXIS 210, AXIS 211, AXIS 206,
AXIS 2120, AXIS 2130, Xview AP-400 / Linudix, Baxall X-Stream, Lumenera LE175 & the iPIX series cameras.
Installation/Upgrade Guide for XProtect Basis, Basis+, Professional and Enterprise
• Shut down all programs. Start the installation program, and proceed as guided by the installation wizard.
NOTE:
The version number for installed device packages can be found in: Start->Settings->Control Panel->Add or Remove Programs Locate the item “Video
Device Pack Vx.x” in the list of installed programs. The version is written as the last part of the name.
140 XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trademarks mentioned in this document are trademarks of their respective owners. This
document is intended for general information purposes only, and due care has been taken in its preparation. Any risk arising from the use of this information rests with the recipient, and nothing herein should be construed as constituting
any kind of warranty. Milestone Systems A/S reserve the right to make adjustments without prior notification. All names of people and organizations used in this document’s examples are fictitious. Any resemblance to any actual
organization or person, living or dead, is purely coincidental and unintended.
© 2011 Milestone Systems A/S. www.milestonesys.com
Installation/Upgrade Guide XProtect Matrix 2.2
• Shut down all programs. Start the installation program, and proceed as guided by the installation wizard.
• When the program asks for the surveillance folder, choose the folder where the Matrix Monitor is installed (e.g. C:\Program Files\Milestone\Milestone Matrix Monitor). And ignore the warning given that it’s NOT a surveillance folder.
Best regards,
The Milestone Team
www.milestonesys.com