Xoay Block
1
Changing the Orientation of Blocks By default, signals flow through a block from left to right. Input ports are on the left, and output ports are on the right. You can change the orientation of a block by choosing one of these commands from the Format menu: The Flip Block command rotates the block 180 degrees. The Rotate Block command rotates a block clockwise 90 degrees. The figure below shows how Simulink orders ports after changing the orientation of a block using the Rotate Block and Flip Block menu items. The text in the blocks shows their orientation.
-
Upload
huy-cuong-bui-cong -
Category
Documents
-
view
1 -
download
0
Transcript of Xoay Block
Changing the Orientation of Blocks
By default, signals flow through a block from left to right. Input ports are on the left, and output ports are on the right. You can change the orientation of a block by choosing one of these commands from the Format menu:
The Flip Block command rotates the block 180 degrees. The Rotate Block command rotates a block clockwise 90 degrees.
The figure below shows how Simulink orders ports after changing the orientation of a block using the Rotate Block and Flip Block menu items. The text in the blocks shows their orientation.