X Power Flexible, high current power amplifier
2
www.cyrusaudio.com Cyrus audio products are designed, manufactured and supported at our headquarters in Cambridgeshire, England. tel: +44 (0)1480 410900 email: [email protected] Recognised by thirty years of awards and accolades, Cyrus consistently pushes the boundaries of audio technology. We’re tirelessly working towards the ultimate hi-fi system, which will reproduce the sound and feeling of a live performance without any interference or loss of detail. X Power is high quality amplifier, with switchable stereo or mono modes providing huge amounts of power. The X Power uses an oversized power supply, which allows it to be incredibly dynamic and responsive to even the most challenging inputs. This high quality amplifier is a great example of our upgrade philosophy, providing you with excellent stereo amplification as well as the opportunity to improve the sound in the future by adding a second X Power. Switchable Stereo / Mono Operation: Running either at 100 Watts per channel as a stereo amplifier a simple flick of a switch turns the X Power into a 181 Watts per channel mono power amplifier for improved sound quality and harder to drive loudspeakers. Music Sense: The X Power features a microprocessor controlled music sense mode. When set to low power standby the X Power detects an incoming signal and automatically and noiselessly switches on the amplifier ready for use. If there is no music detected for an extended period of time it will revert to standby mode. PSX-R2 Upgradability: The X Power includes a port for connecting the PSX-R 2 . The addition of this highly regulated off-board power supply not only improves sound quality but increases output power, especially in mono operation. High Current Design: The X Power includes a vastly over-specified power supply bringing considerable dynamic power in excess of the rated RMS figure, essential to driving difficult loads. System Scalability: The X Power can be used in a variety of different system scenarios. Most typical would be as a Pre / Power in combination with Pre 2 DAC or Stream XP 2 Qx. It is also compatible with Cyrus integrated amplifiers in bi-amped stereo configuration. The fixed gain structure of the Cyrus range enables compatibility with any Cyrus integrated amplifier. X Power features and benefits Product Information: X Power Flexible, high current power amplifier X Power Power amplifier
Transcript of X Power Flexible, high current power amplifier
www.cyrusaudio.com
Cyrus audio products are designed, manufactured and supported at
our headquarters in Cambridgeshire, England.
tel: +44 (0)1480 410900 email: [email protected]
Recognised by thirty years of awards and accolades, Cyrus consistently pushes the boundaries of audio technology. We’re tirelessly working towards the ultimate hi-fi system, which will reproduce the sound and feeling of a live performance without any interference or loss of detail.
X Power is high quality amplifier, with switchable stereo or mono modes providing huge amounts of power. The X Power uses an oversized power supply, which allows it to be incredibly dynamic and responsive to even the most challenging inputs.
This high quality amplifier is a great example of our upgrade philosophy, providing you with excellent stereo amplification as well as the opportunity to improve the sound in the future by adding a second X Power.
Switchable Stereo / Mono Operation:Running either at 100 Watts per channel as a stereo amplifier a simple flick of a switch turns the X Power into a 181 Watts per channel mono power amplifier for improved sound quality and harder to drive loudspeakers.
Music Sense:The X Power features a microprocessor controlled music sense mode. When set to low power standby the X Power detects an incoming signal and automatically and noiselessly switches on the amplifier ready for use. If there is no music detected for an extended period of time it will revert to standby mode.
PSX-R2 Upgradability:The X Power includes a port for connecting the PSX-R2. The addition of this highly regulated off-board power supply not only improves sound quality but increases output power, especially in mono operation.
High Current Design:The X Power includes a vastly over-specified power supply bringing considerable dynamic power in excess of the rated RMS figure, essential to driving difficult loads.
System Scalability:The X Power can be used in a variety of different system scenarios. Most typical would be as a Pre / Power in combination with Pre2 DAC or Stream XP2 Qx. It is also compatible with Cyrus integrated amplifiers in bi-amped stereo configuration. The fixed gain structure of the Cyrus range enables compatibility with any Cyrus integrated amplifier.
X Power features and benefits
Product Information:
X Power Flexible, high current power amplifier
X PowerPower amplifier
X Power Specifications
Power amplifier
Switchable Stereo / Mono operation
2 x 100W into 6Ω
1 x 181W into 6 Ω
Intelligent Music Sense
PSX-R upgrade port
Dimensions (H x W x D) – 73 x 215 x 360 mm
Weight – 8.2kg
Suggested Systems
www.cyrusaudio.com
Cyrus audio products are designed, manufactured and supported at
our headquarters in Cambridgeshire, England.
tel: +44 (0)1480 410900 email: [email protected]
All Cyrus components are manufactured in an advanced die-cast aluminium chassis and this hand finished casework is an integral part of the products’ sound. It’s not just about good looks; the chassis composition is specifically designed to create an electronically shielded and mechanically vibration-free environment for the sensitive audio circuits which are hung inside the inverted chassis, avoiding unwanted electric currents and secondary magnetic fields so the sound you hear is the very best that it can be.
X PowerPower amplifier
Pre2 DAC + X Power
Stream XP2 Qx + X Power (mono) + X Power (mono)
82 DAC + X Power + PSX-R2
R
R
M-
OUT
IN
MC-BUS
M+
L
L
- SPEAKER +
STE
RE
O
MO
NO
R
CHAIN INPUT
LM
+speaker-
Refer to manual for details
STEREO OPERATION :
Set ‘mono/stereo’switch to stereo.
Connect inputs to ‘L & ’.
Connect speakersto ‘-speaker+’ for left &to ‘ ’ for right.
•
•
•
R
Refer to manual for details
MONO OPERATION :
Set ‘mono/stereo’switch to mono.
Connect input to ‘M’.
Connect speaker+ve to ‘M+’ andspeaker -ve to ‘M-’.
•
•
•
P R E C I S I O NELECTRONICINSTRUMENTMADE IN ENGLAND
USEPSX-RONLY
