X-Calibur Structural System - X-Seal SIP Joint Inserts · 2020. 1. 9. · X-Calibur in writing...
Transcript of X-Calibur Structural System - X-Seal SIP Joint Inserts · 2020. 1. 9. · X-Calibur in writing...
-
X-Joint RJ1
Technical Data Sheet
Product Description
RJ1
RJ1/C
Type A B C D Emovement*Total
RJ1 10/15
RJ1 15/20
RJ1 25/30
RJ1 30/40
RJ1 40/50
RJ1 60/80
RJ1 80/100
RJ1/C 10/15
RJ1/C 15/20
RJ1/C 25/30
RJ1/C 30/40
RJ1/C 40/50
RJ1/C 60/80
RJ1/C 80/100
10-15
15-20
25-30
30-40
40-50
60-80
80-100
10-15
15-20
25-30
30-40
40-50
60-80
80-100
20
30
40
50
65
100
120
20
30
40
50
65
100
120
4 33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
33/45
4
4
4
4
4
4
4
4
4
4
4
4
4
50
50
50
50
50
50
50
117
117
117
117
117
117
167
167
167
169
67
67
67
67
All dimensions are in mm
Use
Material
Covers and seals joints in accesible roofs.
Cover plate made of anodized aluminium quality 60.63.50.4mm thick or stainless stell cover plate AISI 304 or 316, 3mm thick. SIP sealant made of special PVC.
Production lengthAluminium: 3 or 4m lengthsPVC: 20m rolls or others upon request
Installation GuidelinesX-Calibur provides detailed method statements on all itsproducts for use in various applications. These must be referred to prior to starting work.
Wherever possible install the expansion joint module atthe mid-point temperature at which will be the joint willbe operated.
Formerly known asX-Joint 3R-WTS
40690110Fully waterproof joint systems for roof joints 15mm to 100mm wide
X-Joint RJ1 is an anodized aluminium fully waterproof jointsystem that is used on roofs that will be subject to pedestriantraffic. It is used in joints widths of 15mm to 100mm.
-
It is essential that the joint is installed perfectly level and is well anchored in order to perform correctly.
Health and Safety This product is for industrial use only by trained operatives. It is not considered hazardous if used correctly.
Authorized Technical Specialist Please note that only X-Calibur Authorized Technical Support Specialists (‘ATSs’) are permitted to change any of the information in this data sheet or to provide written recommendations concerning the use of this product. Visit www.x-calibur.us for a full list of X-Calibur ATSs.
Datasheet ValidityX-Calibur makes modifications to its product datasheets on a continuous basis. Please check the datasheet update section on www.x-calibur.us to ensure you have the latest version.
WarrantiesX-Calibur supplies products they comply with the properties shown on the current datasheets. In the unlikely event that products supplied are proved not to comply with these properties, then we will replace the non-compliant product or refund the purchase price. X-Calibur does not warrant or guarantee the installation of the products as it does not have control over the installation or end use of the products. Any suspected defects must be reported to X-Calibur in writing within five working days of being detected. X-Calibur Construction Systems Inc. makes nowarranty as to merchantability or fitness for a particular purpose and this warranty is in lieu of all other warranties express or implied.X-Calibur Construction Systems Inc. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay.
www.x-calibur.us