8/16/2019 x 830 Manual

1/8

8/16/2019 x 830 Manual

2/8

X830 TV Tuner CardQuick Installation Guide

About X830

X830  is a powerful card, can make you access the TV channels and the

broadcast programs. With this card, your TV entertainment place won't belimited in the living room any more! CCTV Baby is designed to turn your PC

monitor into TV set and Radio. With our own TV watching and recording

software, you can watching TV at 1600X1200,three or more mouthed of

video de-interlacing algor ithm, that gives you a high quality TV impression.

 And this TV tuner card works perfectly without any needs of PC system,

simply connect to your monitor, fast and easy for user use!

Product Features

• Watch TV on PC• High-quality Silicon tuner for PAL/NTSC/SECAM TV systems• Supports TV/S-Video/Composite input• Listen to FM radio• Time-Shifting Function• Wi th PCI Audio function• One RF input for TV and FM• Schedule TV recording and save directly to your HDD• Remote control Power Off 

 

System Requirements

• CPU: P4-1.7 GHz or higher 

• Memory: 512 MB

• Free disk space: 300 MB minimum

• Sound card

•

• CD-ROM for software installation

• OS: Windows XP/Windows Vista

 Available PCI slot

1

Package Contents• X830 PCI TV tuner Card

• Remote control

• IR Receiver cable

• Installation CD

• QIG (Quick Installation Guide)

• PAL-NTSC Connecter (opt ion)

8/16/2019 x 830 Manual

3/8

2

Hardware InstallationConnection

TV/FM IN TV/FM signal input port AV IN AV input port

S-VIDEO IN S-Video input portRM Infrared receive port

Driver and Software installation

Step1: OS will remind a new hardware-- New Hardware Device  was " "found. Please choose  Cancel" "

 

8/16/2019 x 830 Manual

4/8

 

8/16/2019 x 830 Manual

5/8

 

8/16/2019 x 830 Manual

6/8

 

5

X830 User  Interface

FM Interface

Mygica

8/16/2019 x 830 Manual

7/8

6

Remote control and key description

FAQQ1: Why is the image discontinuity? A1:1.Please check if the system is lower than the minimum requirement.2.Please check if the VGA card supports Direct Show or  install the newest driver .

Q2: Why do the drive not be installed? A2:1.Please check if the name of Facility Management is PCI Video Device  and PCI Audio Device2.Please make sure you installed DIRECTX9.0C which is in the CD 

bundled with the X830Q3: Why cannot see the image (black screen)? A3:1.Try to restart application software.2.Try to reinstall PCI Video Device and PCI Audio Device driver .

and S-Video

8/16/2019 x 830 Manual

8/8

7

Q4: Why do the color and sound have problem when watching TV? A4: Please check if the "Country and Zone" is correct.

Q5: Why is the TV quality very poor? A5: Please check cable signal's quality. If so, please add a signal amplif ier.

Q6: There are lost frame drop and A/V synchronization when playingrecorded TV program. A6: Please check if the PC system is lower than the minimum requirement. If no, please check sound drive or install WDM driver program of sound card.

Q7: Which software can I use to edit the recorded fi les? A7: Can use Ulead, Arcsof t, Intervideo and Cyberlink editing software.

Q8: There are more noise when replay the record file.

 A8:1.Maybe when you record the program the volume of Line-In is too high.Please adjust the volume to middle to try again .2. Maybe the problem is caused by Sound card, some low cost sound cardhas recording problem but playing no problem.

Q9: Cannot find video capture hardware  "There are no HD equipment or no video capture hardware" A9: If the problem is appearing when you start X830, it means driver  program didn't installed successfully. Please re- install.Q10: Remote controller is not functional A10:1.Please check if battery were installed correct.2.Please check if you need new battery.3.IR receiver is not right direction or too far away from the sender.