Wynns Professional
-
Upload
laur-popescu -
Category
Documents
-
view
75 -
download
0
Transcript of Wynns Professional
-
Professional Chemical Treatmentsand Equipment
-
ContentOver 70 years experience
Wynns offers professional chemical treatments that restore optimal operation in vehicle systems. As an alternative to mechanical repairs, many car problems can be resolved or prevented using chemical treatments that are: efficient affordable easy-to-use
Wynns chemicals meet the specific requirements of modern engines, while optimizing and protecting older vehicles. Also, with fuel prices consistently increasing, many Wynns treatments improve the fuel economy in cars.
The Wynns range of specialty chemicals includes: fuel system products oil and transmission products cooling system products air treatment workshop & service products
With over 70 years experience, Wynns R&D Division has worked continuously to remain at the forefront of cleaning and lubricating technology, while ensuring that all Health and Safety and Environmental requirements are met. Wynns extensive knowledge of the automotive market and its ever-changing requirements form the basis of our product development. Wynns manufacturing plants operate according to an ISO 9001 certified quality system. Many products are approved by a number of worldwide vehicle manufacturers.
Wynn's relies on a well-structured, global distribution network of subsidiaries and distributors. The Wynn's brand is present worldwide: in Europe, the Middle East, Africa, North and South America, Asia and Australia.
In 2005, Wynns joined the Performance Polymers division of Illinois Tool Works.
Fuel system Diesel
Fuel system Petrol
Fuel system Petrol & Diesel
Oil & Transmission Systems
Cooling System
Workshop & Service
Air Treatment
Automatic Transmission Service
Power Steering Service
Fuel Service
Cooling System Service
Brake Service
ServePlus
4
6
8
9
11
12
15
16
16
17
18
18
19
-
4 5
Fuel System - DieselBoth modern cars and older vehicles have specific requirements, that have a chemical solution to provide the optimal engine performance and driving comfort. Modern fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel. These lead to fouling of the fuel system, lack of lubrication, corrosion and other problems. Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel system and wear on the components.
Diesel Power 3with Cerium Nanotechnology
Ref. Nr. 50393 500 ml
Regenerates the diesel particulate filter and reduces exhaust emissions and soot.
Regenerates diesel particulate filter. Reduces exhaust emissions and
soot. Improves combustion, engine
performance and fuel economy.
Properties For all diesel engines. For diesel and bio diesel up to B30. Harmless for catalytic convertors
and diesel particulate filters.
Directions To regenerate diesel particulate
filter: use every 3 to 5000 km (1800 to 3000 miles).
To keep injectors clean: use every 10000 km (6000 miles).
Use one bottle on 50 litres of fuel.
Premium product Diesel
EGR 3
Ref. Nr. 23379 200 ml
Premium product Diesel System
Cleaner
Ref. Nr. 46754 - 325 ml
Cleans and lubricates the fuel system.
Cleans and lubricates the fuel pump and injectors.
Restores original spray pattern of the injectors resulting in better combustion.
Compensates lack of lubricity of low sulphur fuels.
Eliminates condensation water.
Properties
For all diesel engines with or without turbochargers.
Applications
Directions 325 ml every 7.500 to 10.000
km.
Diesel Clean-up
Ref. Nr. 25241 325 ml
Cleans the diesel fuel system.
Concentrated, undiluted diesel fuel system cleaner.
Cleans injectors, restores spray pattern.
Decarbonises the combustion chamber.
Improves combustion; reduces exhaust smoke.
Lubricates the fuel pump.
Properties
For all diesel engines, including common rail designs.
To be added directly to the diesel fuel filter.
Applications
Directions See instructions on bottle for
use.
DO NOT add to fuel tank
Ice Proof for Diesel
Ref. Nr. 90795 - 1 litre
Flow improver for diesel fuel at low temperatures.
Prevents the growth of wax crystals in diesel fuel at low temperatures.
Prevents settling and accumulation of wax crystals at the bottom of the tank (Anti-wax settling).
Makes the diesel fuel winter-safe up to -26C/-30C depending on the properties of the diesel fuel.
For all diesel engines with or without turbochargers.
For all diesel fuels and biodiesel up to B05.
Applications
Directions Add 250 ml per 100 litres diesel
fuel when the fuel temperature is above 5C.
Applications
Properties
For further information: See Safety and Technical Data Sheet.
Diesel Clean 3
Ref. Nr. 12293 500 ml
Premium product
Very strong cleaning of injectors. Keeps EGR valve and turbo clean.
Cleans injectors and keeps EGR valve and turbo clean.
Restores combustion and engine performance.
Protects and lubricates effectively injectors and pumps.
Properties
For all diesel engines, including common rail and pump injector engines.
For diesel and bio diesel up to B30.
Harmless for catalytic convertors and soot filters.
Applications
Directions For best results use one bottle
in a half-full tank ( 20 litres of fuel).
Repeat every 10.000 km (6000 miles).
Cleans the air intake, inlet valves, air flow sensor, EGR and turbo of all diesel engines.
Provides immediate thorough cleaning of air intake system, air flow sensor, inlet valves, turbo and EGR system.
Dissolves gum, lacquer, tar, carbon and deposits.
Provides a regular and stable idle.
Properties
For all diesel engines. Harmless for catalytic
convertors and diesel particulate filters.
Applications
Directions See label. Recommended to be used
at each service interval to maintain cleanliness.
For a complete engine cleaning, we recommend using both: Diesel Clean 3 (Liquid): curative treatment Cleans the fuel system; the wet part of the engine. Diesel EGR 3 (Aerosol): curative treatment Cleans the air intake manifold and the inlet valves; the dry part of the engine.
Cerium action NanotechnologyAccelerates the combustion of soot particles. As a result the combustion temperature of the soot drops, so that the amount of soot is considerably reduced at lower exhaust temperatures. The after-combustion of the soot particles will lead to a regeneration of the soot filters.
without cerium with cerium
clogged soot filter clean soot filter
black smoke no smoke
-
76
-50%
-30%
Fuel System - Petrol
Petrol Clean 3
Premium product
Properties
For all petrol engines (injection, direct injection or carburettor).
For petrol and bio petrol up to E10.
Harmless for catalytic convertors.
Applications
Directions Use one bottle on 50 litres of
fuel. Repeat every 10000 km (6000
miles).
One tank clean-up: instantly cleans and protects injectors, inlet valves and EGR system.
Restores combustion and engine performance.
Reduces CO and HC exhaust emissions.
Before
After
Before
After
HC-emission
Can reduce the CO-emission up to 50% and the HC-emission up to 30%.
Ref. Nr. 29793 500 ml
Very strong cleaning of injectors, inlet valves and EGR system.
CO-emission
Petrol Power 3
Ref. Nr. 29393 500ml
Cleans and protects injectors, inlet valves and EGR system. Reduces fuel consumption.
Properties
For all petrol engines (injection, direct injection or carburettor).
For petrol and bio petrol up to E10.
Harmless for catalytic convertors.
Applications
Directions Use one bottle on 50 litres of
fuel. Repeat every 10000 km (6000
miles).
Cleans and protects injectors, inlet valves and EGR system.
Improves combustion, engine performance and fuel economy.
Protects the engine when using E10 fuel.
Petrol EGR 3
Ref. Nr. 29879 200 ml
Cleans the air intake, inlet valves, air flow sensor and EGR system of all petrol engines.
Properties
For all petrol engines. Harmless for catalytic
convertors
Applications
Directions See label Recommended to be used
at each service interval to maintain cleanliness.
Provides immediate thorough cleaning of air intake system, air flow sensor, inlet valves, and EGR system.
Dissolves gum, lacquer, tar, carbon and deposits.
Provides a regular and stable idle.
Restores or maintains the engine performance.
Eliminates and avoids starting problems.
Improves accelerating properties.
Premium product Fuel System
Cleaner
Ref. Nr. 61354 - 325 ml
Maintains the cleanliness of the fuel system. Reduces the octane requirement increase of the engine due to fouling.
Properties
For all petrol engines with injection systems or carburettor.
Applications
Directions Apply every 2,000 km. 325 ml
treats 40/70 litres petrol. In intensive and city traffic: one
bottle every tank filling.
Prevents the formation of deposits on injectors and valves as well as in the carburettor.
Lubricates the injectors, the inlet valves and the fuel system.
For further information: See Safety and Technical Data Sheet.
For a complete petrol engine cleaning, we recommend using both: Petrol Clean 3 (Liquid): curative treatment
Cleans the fuel system: the wet part of the engine Petrol EGR 3 (Aerosol): curative treatment
Cleans the air intake manifold and the inlet valves: the dry part of the engine.
Premium product Air Intake and
Carburettor CleanerRef. Nr. 54179 - 500 ml
Properties
Spray on visible carburettor parts.
For air intake systems and PCV valve of injection and carburettor petrol engines.
Directions
Quickly dissolves and removes dirt.
Strong power jet spray to support cleaning action.
Eliminates dirt and deposits in the air intake manifold and on the visible carburettor parts.Throttle valve cleaner.
-
8 9
7 mm2/s
13 mm2/s
19 mm2/s
12345678
12345678
+30%
3 5 7 9 11 13 15 17 3 5 7 9 11 13 15 17
-35%
Super Charge
Ref. Nr. 74944 - 325 ml
Improves the high temperature viscosity properties of engine oil and stops oil leaks.
Reduces excessive oil consumption via piston rings and valve guides.
Increases the viscosity index of the oil.
Rejuvenates rubber oil seal rings and O-rings.
Restores compression and oil pressure.
Reduces exhaust smoke due to oil consumption and oil burning.
Properties Effective under heavy load and high
temperature operation. Specially recommended for older
engines.
Applications
Directions 325 ml treats up to 3 to 6 litres of
engine oil (every oil change).
Oil Temperature 100C
SAE 5W40 non-treated
Viscosity increase
SAE 5W40 + 10 % Super Charge
Compression value in barBefore After
Oil & Transmission SystemsCity traffic, traffic jams and short drives lead to higher stress on todays vehicles engine lubrication. In combination with long oil change intervals, this can lead to a premature degradation of the oil properties and loss of functionality of the engine components in the oil system.
Oil System Cleaner
Ref. Nr. 47244 - 325 ml
Cleans and protects the lubricating system so preventing immediate contamination of fresh oil by residues left behind.
Properties
For petrol and diesel engines with or without turbochargers and for stationary equipment.
Manual gearboxes, differentials and reduction gears.
Applications
Directions 325 ml treats up to 3 to 6 litres
of engine oil. Manual gearboxes, differentials
and reduction gears and hydraulic systems: add 5 % Wynns Oil System Cleaner to the oil.
Dissolves deposits and keeps dirt and crankcase impurities in suspension.
Internally cleans engines, hydraulic systems, gearboxes and differentials.
Frees sticking piston rings and hydraulic valve lifters.
Contains EP additives for extra protection.
Engine Oil Stop Leak
Ref. Nr. 77441 - 325 ml
Prevents and stops oil leaks without dismantling.
Properties
Recommended for all petrol and diesel engines with or without turbochargers, which suffer from oil loss.
Applications
Directions 325 ml treats up to 3 to 6 litres
of engine oil.
Revitalises rubber and neoprene seals and O-rings of crankshaft, camshaft and valve stems.
Does not influence oil quality or viscosity.
Automatic Transmission TreatmentRef. Nr. 64544 - 325 ml
Stops leaks and eases shifting of automatic transmissions.
Properties
Can be added to all conventional ATF fluids meeting Dexron II, III or VI, Ford, LHM or equivalent specifications. Also for power steering systems containing ATF fluids.
Applications
Directions 325 ml treats up to 6.5 litres of
automatic transmission fluid.
Rejuvenates rubber seals and O-rings.
Cleans and protects the system by means of detergents and dispersants.
Prevents ageing and oxidation of automatic transmission fluid.
For further information: See Safety and Technical Data Sheet.
Absorbs condensation water in the fuel system (suitable for diesel and petrol engines).
Dry Fuel
Ref. Nr. 71854 - 325 ml
Properties Protects against rust and
corrosion. Prevents icing in the
carburettor and fuel filter. Provides a better cold start
performance.
For all petrol and diesel engines with or without turbochargers.
For cars, trucks, stationary and marine engines, storage tanks.
Applications
Directions Normal dose: add 325 ml every
10,000 km.
Fuel Stabilizer
Ref. Nr. 47355 - 325 ml
Preserves the fuel when the engine is out of use for a long time or when the fuel remains in the tank for a long period, e.g. petrol in LPG engines.
Properties Protects the fuel against
oxidation. Prevents deposit formation in
the tank and filter caused by oxidation products.
Eases starting of the engine after a period of extended shutdown.
For petrol and diesel engines.
Applications
Directions 325 ml treats up to 50 litres of fuel.
Fuel System - Petrol & Diesel
13.5 mm2/s
18.5 mm2/s +30%
Super Friction Proofing
Ref. Nr. 47044 - 325 ml
Improves lubrication, keeps the lubricating system clean and reduces friction.
Properties
For all petrol and diesel engines with or without turbochargers.
Recommended for old as well as new vehicles after the running-in period.
Applications
Directions 325 ml treats up to 3 to 6 litres
of engine oil (every oil change).
Reduces friction and wear. Conditions metal surfaces
and puts a protective layer on them.
Reduces oxidation and premature thickening of the oil.
Prevents formation of deposits and sludge.
Retards fouling of the oil filters.
Friction coefficient
Less metal wear
Fully synthetic engine oil
Fully synthetic engine oil + Super Friction Proofing
-
10 11
Hydraulic Valve Lifter ConcentrateRef. Nr. 76844 - 325 ml
Restores efficient working of hydraulic valve lifters.
Properties
Recommended for all petrol and diesel engines with or without turbochargers.
Applications
Directions 325 ml treats up to 3 to 6 litres
of engine oil.
Releases sticking valve stems and hydraulic valve lifters.
Dissolves dirt, gum and varnish deposits in the oil channels.
Contains anti-wear additives. Quietens valve train noise.
Oil & Transmission Systems
H.P.L.S. Transmission Treatment (+Stop Leak)Ref. Nr. 59403 / 59405 - 125 ml
Power Steering Stop Leak
Ref. Nr. 64503 / 64505 - 125 ml
Improves the anti-wear and viscosity characteristics of gearbox oil.
Stops and prevents leaks in the power steering system.
Properties
For steering gears, manual gearboxes and differentials. Can be used for API GL, as well as ATF Dexron oils.
Applications
Directions 125 ml treats up to 2 litres of
oil.
Prevents and stops oil leaks. Eases shifting. Reduces noise, friction and
wear in manual transmissions and differentials.
Can be added to all conventional power steering oils meeting Dexron II, Dexron III, Ford, LHM or equivalent specifications.
Applications
Directions 125 ml treats up to 2 litres of
oil.
Prevents and stops oil leaks without dismantling.
Revitalises rubber and neoprene seals and O-rings.
Properties
Cooling SystemCooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary causes of vehicle breakdowns. To prevent these problems Wynns recommends radiator treatments.
Cooling System Stop LeakRef. Nr. 45644 - 325 mlRef. Nr. 45695 - 1 litre
Cooling System FlushRef. Nr. 45944 - 325 mlRef. Nr. 45995 - 1 litre
Cylinder Block Seal
Ref. Nr. 72250 - 325 ml
Stops small leaks in the radiator and cooling system.
For a thorough cleaning of the cooling system.
Repairs cracks in cylinder blocks without dismantling.
Properties
Properties
Properties
For all water cooled systems of petrol and diesel engines.
Applications
Directions Add the total contents to
the cooling system via the expansion tank (if part of the system circuit), or directly into the radiator (if a single hose overflow tank is fitted).
Top up the system with coolant if required.
Run engine for approximately 5 minutes to circulate and stop leaks.
325 ml treats cooling systems with a capacity between 5 - 12 litres.
Stops and prevents leaks in the radiator and cooling system.
Improved corrosion and rust protection.
Compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
Will not repair broken or split hoses.
Does not clog radiator waterways.
Will not harm rubber hoses, gaskets or other system components.
For all water cooled systems of petrol and diesel engines.
Applications
Directions Add contents to the cooling
system via the expansion tank (if part of the system circuit) or directly into the radiator (if a single hose overflow tank is fitted).
Let the engine run at idle for 10 minutes.
Stop the engine and allow it to cool, then open and drain system.
With system still open, flush with water until clear, close and refill with coolant.
325 ml treats cooling systems with a capacity between 5 - 12 litres.
Powerful, acid free radiator cleaner.
Dual action: removes scale and eliminates rust, deposits and oily residues
Excellent performance in OAT-coolants (Organic Acid Technology).
Safe for all metals and hoses in cooling systems.
Internal and external cracks in cylinder blocks.
In case of severe white exhaust smoke.
Applications
Directions See technical data sheet or
peel-off label. 325 ml treats cooling systems
with a capacity between 4 - 8 litres.
Repairs cracks in cylinder blocks of cast iron, steel and aluminium, without dismantling.
Assures a permanent repair in 30 minutes.
Resists high temperatures, water pressure and vibration.
Does not clog hoses.
In order to obtain the optimal action of Wynns Cooling System Flush, we recommend using the Wynns CoolingServe machine For further information:
See Safety and Technical Data Sheet.
Important Wynns Cylinder Block Seal is
not compatible with cooling liquids. It should only be added to pure water. Do not pour it into oil, or directly into the cylinders. Freezing Parts Special Parts
Point Coolant G12 Water
-69C 2 1
-36C 1 1
-17C 1 2
-12C 1 3
Ref. Nr. 23495 1 litreRef. Nr. 23496 5 litresRef. Nr. 23497 25 litresRef. Nr. 23499 200 litres
Protects the cooling system against corrosion and attack of non-ferrous metals.
Protects the cooling system against freezing and overheating.
Contains a pH buffer which retards the acidification of the liquid and consequently prolongs its lifetime (4-5 years).
Can remain in the cooling system during 4 to 5 years.
Protects against rust and corrosion and especially against electrolysis and pitting of aluminium components.
Neither contains silicates, nor nitrites and phosphates.
Prevents scale formation. Meets the Volkswagen type G12
standard.
Properties
Applications Recommended for all water
cooled systems of petrol and diesel engines.
To be used diluted in water.
Directions See label.
Special Coolant G12 Concentrated
Antifreeze LonglifeRef. Nr. 90501 1 litreRef. Nr. 90596 5 litresRef. Nr. 90599 200 litres
Protects the cooling system against freezing and metal corrosion during 3 years.
Properties
For all water cooled systems. Meets most international
standards. To be used diluted in water,
as a function of the exterior temperature expectations.
Applications
Directions See label.
Permits effective engine cooling. Anticorrosion protection of all
metals and alloys used in the cooling system.
Protection against frost (see table).
Compatibility with rubber and plastics used in the cooling system.
Can be readily used in combination with Wynns Cooling System Stop Leak.
Nitrite, amine and phosphate free.
Freezing Parts PartsPoint Antifreeze water -36C 1 1
-17C 1 2
-12C 1 3
-
12 13
Workshop & Service Products
Viscotene
Ref. Nr. 80179 - 500 ml
Strongly adhesive and highly viscous synthetic lubricant.
Exceptionally adhesive to surfaces. Water-repellent and water-
resistant. Reduces and dampens noise of
mechanisms. Resists steam washout, solvents,
high temperatures and acids. Compensates for variations in
clearance and pressure.
Properties
Mechanisms exposed to moisture, warm or cold water, detergents, acids, steam, etc.
Equipment for which conventional lubricants drip or leak away.
Applications
Directions Apply the product. Allow solvent to sufficiently
evaporate, prior to further manipulation of the material.
Silicone Lubricant
Ref. Nr. 52579 - 500 ml
Silicone based lubricant.
Provides dry lubrication. Reduces static electricity. Prevents sticking of materials. Water and moisture repellent. Does not stick, stain and oxidize.
Properties
On different material combinations: plastic on metal, on wood, metal on metal, rubber mouldings, etc.
Ignition mechanisms in electrical systems of vehicles.
Prevents jamming or freezing of windows, doors, sliding doors, etc.
Applications
Brake and Clutch CleanerRef. Nr. 61479 - 500 mlRef. Nr. 11196 - 5 litresRef. Nr. 61497 - 30 litres
Powerful product for cleaning and degreasing of mechanical parts.
Removes oil, brake fluid, grease and other dirt from metal components.
Eliminates dust from brake and clutch parts.
Properties
Brake parts. Clutch parts. Mechanical parts of cars, bicycles,
machines, etc.
Applications
Directions Apply by means of aerosol and
allow running off. Let it dry naturally, with compressed
air or wipe off with a cloth. Do not use on plastics or painted
surfaces.
Super Rust Penetrant
Ref. Nr. 56479 - 500 ml
Multifunctional lubricant and penetrating oil.
Quickly frees locked, rusted or corroded parts.
Lubricates and cleans precision parts and devices.
Repels water and moisture. Stops squeaking and creaking. Prevents short circuits in electrical
systems.
Properties
Rusted joints and fittings. Cables and precision mechanisms. Removes humidity on spark plugs
and in distributors. To free parts. Removes humidity on the ignition
(spark plugs).
Applications
Chain Lube
Ref. Nr. 66479 - 500 ml
Strongly adhesive water repellent lubricant with high penetrating properties.
Retards friction and wear. Resists mud, cold, hot and salt
water. Does not conduct electricity.
Properties
Motorcycle and bicycle chains, chain saws, chain conveyors.
Tools for workshops, DIY, agriculture, etc.
Applications
Directions Spray on elements to lubricate only. Let the solvent evaporate.
Starting Fluid
Ref. Nr. 58055 200 ml
Eases petrol and diesel engine starting at cold temperatures.
Helps instant engine starting. Prevents battery fatigue.
Properties
All types of two- and four-stroke petrol and diesel engines.
Small engines such as outboards, chain saws and lawn mowers.
Applications
For further information: See Safety and Technical Data Sheet.
Easy to use and high quality cleaning and lubrication products that meet todays market demands.
-
14 15
Airco-Clean ultrasonic for cars - for exclusive use with Aircomatic equipment
Air Purifier ultrasonic for cars for exclusive use with Aircomatic equipment
AircomaticIII Patent pending
Ref. nr. 30205 - 100 ml
Ref. nr. 31705 - 60 ml
Ref. nr. 68480
Removes fouling and nicotine from the evaporator. Disinfects and eliminates microbes, fungi and bacteria. Removes cause of allergic reactions (sneezing, coughing,
irritation to eyes ). Cleaning action of the detergents against all impurities.
Neutralizes bad smells by means of a chemical reaction with their molecules.
Instantly removes bad smells like cigarette smoke, pet smell, body odours, garbage, onion, garlic, food smells, spilled food, vomit, smell of mildew and damp, wet clothing.
Long lasting effect by means of the molecular technology, which neutralizes the smell molecules.
Does not mask the smell, but eliminates it. Due to the fine nebulization with the Wynns Aircomatic the
entire space is treated.
Easy to use, no supervision necessary during treatment. Double function:
Function 1: Clean and remove bad smells from air-conditioning Ultrasonic cell nebulizes the liquid Airco-Clean into small drops of < 5
micron. The outlet tube directs the vapour flow
Function 2: Remove bad smells from vehicle interior An ozone generator produces ozone, to neutralize bad smells in cars
and rooms After the ozone treatment, the equipment automatically nebulizes
Wynns Air Purifier Wynns Air Purifier enhances disinfecting power of remaining ozone and
accelerates its natural decomposition to speed up safe re-entry
Properties
Properties
Properties
Passenger compartments of cars, trucks, buses, boats, ...
Home: kitchen, pets, carpet, laundry room, ... Workplace: office, restaurant, lab, workshop, ...
Applications
Air-conditioning systems and interiors in cars, trucks and buses.
Application:
Wynns Airco-Clean and Air Purifier are composed of non-toxic
and non-irritating components.
For further information: See Safety and Technical Data Sheet.
Air TreatmentAir quality problems are easily solved with the Wynns air treatments. There is Airco-Clean to disinfect and clean the aeration and air conditioning system, and Air Purifier to remove bad smells from the passenger compartment.
All air-conditioning systems of cars, trucks and buses.
Applications
Workshop & Service
Super Concentrated Screen-wash 21+
Ref. Nr. 45101 250 mlRef. Nr. 77395 1 litreRef. Nr. 77396 5 litresRef. Nr. 77397 25 litresRef. Nr. 77399 200 litres
Cleaning and antifreeze product for windshield washer systems.Methanol free.
-70C
Properties
Add the product pure or diluted to the tank of the washer system.
Applications
Directions See label.
Protects the screen-wash system against freezing up to a temperature of -70C.
Does not attack paint or rubber. Leaves no white marks on the
bodywork.
Temp. Parts Screen- Parts wash (773) water
-70C Pure
-34C 2 1
-23C 1 1
-12C 1 2
-8C 1 3
MOLECULARTECHNOLOGY
See manual.
Directions
-
16 17
Fuel ServiceModern high performance fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel. This can lead to fouling of the fuel system and other problems. Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel system.
Wynns FuelServe is an apparatus for the effective cleaning of injection systems for petrol and diesel engines without disassembly, using Injection System Purge (ISP) for petrol engines and Diesel System Purge (DSP) for diesel engines. A service with Wynns FuelServe restores optimal engine performance and driving comfort of your customers vehicle!
FuelServeRef. nr. 68403
Cleans the injection system of petrol and diesel engines without dismantling.
Easy to connect and easy handling. Fluid delivery can be adjusted to the degree
of fouling and engine displacement. Operates via the vehicle's battery
(12 V). When the treatment is completed, automatic
stop and an alarm is activated. Provided with complete set of adapters for
European market.
Properties Can be connected to all petrol injection
systems (K, KE, L, LE, LH, Motronic, Monojetronic, Renix, direct injection, etc.) and diesel engines (prechamber and direct injection, common rail, injection-pump unit).
Applications
Directions See manual.
ISP-Injection System PurgeRef. Nr. 76695 - 1 litre
Cleans valves, injectors, combustion chambers and other vital parts in fouled petrol systems of carburettor and injection engines without dismantling.
Frees sticking exhaust valves. Reduces emissions of noxious exhaust gases. Restores the injector spray pattern and
improves combustion. Harmless to catalytic converters.
Properties For all petrol systems of carburettor and
injection engines. Recommended treatment every 20,000 to
30,000 km or when experiencing problems of irregular idling, poor accelerating or excessive exhaust emissions.
Applications
DSP-Diesel System PurgeRef. Nr. 89195 - 1 litre
Cleans injectors, pump and combustion chambers.
Restores the injector spray pattern and improves combustion.
Reduces emissions of noxious exhaust gases and soot.
Harmless to catalytic converters.
Properties For all diesel injection systems of cars and
trucks with or without turbocharger. Recommended treatment every 20,000 to
30,000 km or when experiencing problems of fouled injectors, heavy black smoke, irregular idling, bad acceleration, etc.
Applications
For further information: See Safety and Technical Data Sheet.
TranServeRef. Nr. 68414
Cleans the oil system of automatic gearboxes and restores good operation.
Changes up to 90% of the old ATF (with the conventional method, up to 50% of the old ATF remains behind).
Easy connection and operation. Adapters for all types of non-US cars. Optional adapters for US cars
available.
Properties Recommended when changing
the ATF of automatic gearboxes or when experiencing shifting problems.
Applications
Automatic Transmission Treatment Ref. Nr. 64544 325 mlAutomatic Transmission Flush Ref. Nr. 64401 325 ml
Automatic Transmission ServiceWynns TranServe changes the ATF in automatic gearboxes and cleans the transmission without dismantling.
Cleaning and changing without
dismantling
Directions
Directions
Directions
See manual.
See manual.
See manual.
Power Steering ServiceWynns Power Steering Serve thoroughly cleans the power steering system and changes the fluid without dismantling.
Power Steering ServeRef. Nr. 68413
Cleans the power steering system by changing the oil without dismantling.
Changes up to 90% of the old power steering fluid (with the conventional method, up to 50% of the old power steering fluid remains behind).
Assures and restores good operation of the steering servo system.
Helps to prevent premature failure of newly fitted power steering racks by removing swarf and contamination.
Properties Recommended when changing the
fluid in the power steering system. Recommended before changing a
power steering rack or pump.
Applications
Power Steering Serve Twin-Pack Service kit - Ref. Nr. 10176 Power Steering Flush & Power Steering Fluid & Conditioner
Power Steering Flush: Ref. Nr. 62411 1,9 litres
Directions See manual.
-
18 1918
Cooling System ServiceCooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary cause of vehicle break down. Wynns CoolingServe provides a fast and efficient method of cleaning and refilling the complete cooling system.
CoolingServeRef. Nr. 68401
Changes up to 95% of the old cooling liquid (with the conventional method, up to 40% of the old cooling liquid remains behind).
Works fast and easy. Prevents fouling of new cooling liquid
by old contaminated liquid. Prevents wear of the cooling system
parts (pump, engine block, radiator, thermostat).
Operates independently via a 12-volt power source (vehicle's battery).
A set of adapters makes it possible to connect to every type of car.
Mounting the adapter: a few minutes.
Properties
Cooling System Stop Leak - Ref. nr. 45644 - 325 mlCooling System Flush - Ref. nr. 45944 - 325 ml
For further information: See Safety and Technical Data Sheet.
All engines equipped with a "water" cooled system.
Applications
After-Sales Programmes& Equipment
Wynns Serve Plus after-sales programmes offer professional equipment and chemical solutions that ensure the optimal operation and driving comfort of all vehicle systems.
Wynns Serve Plus after-sales programmes are designed to: offer a customer solution that is efficient and affordable introduce easy-to-operate treatments that are time- saving for technicians seriously increase service departments profits offer technical helpline service supply full training for the service staff focus on customer satisfaction and customer retention by supplying on-going after-sales support
Wynns Serve Plus product services include: fuel system service air treatment automatic transmission service power steering service brake service cooling system service
Directions See manual.
Brake ServiceA time-saving solution for a complete brake system exchange! Wynns BrakeServe exchanges the brake fluid in a fast and easy way, at all four wheels simultaneously. Wynns Brake Fluid Easy Check is a handy testing device to check the boiling point of brake fluids and indicates if it needs to be changed.
BrakeServeRef.nr. 68415
Provides a complete brake system fluid exchange in one application.
Individual or simultaneous bleeding of all four wheel cylinders with individual colour coded toggle switches.
Fast and easy exchange method, user friendly.
Properties For all hydraulic brake systems of
cars and light trucks, conventional and ABS systems.
Applications
See manual
Directions
All moisture and air are eliminated from the brake system.
Extends life of brake system components.
Provides optimal functioning of the brakes at all times.
-
08/2010 WM9500 2010 Illinois Tool Works Inc.
Wynns Belgium bvbaIndustriepark West 46B-9100 Sint-Niklaas / BelgiumTel: 32-3-766.60.20Fax: [email protected]
Wynns Automotive France S.A.S.Z.A. EUROPARC, 2, av. Lonard de VinciF-33608 Pessac CedexTel.: 05 57 26 29 00Fax: 05 57 26 70 60www.wynns.fr [email protected]
Wynn Oil UKUnit 3, Shipton Way,Express Business Park, Northampton Road, Rushden NN10 6GL Tel : 0870 458 0808 [email protected] www.wynns.uk.com
Wynns in DeutschlandTel.: 00-80025525550 (frei) Fax: 00-80025525551 (frei)[email protected]
Wynns Italia S.r.l.Via G. Rossa 31I-51037 Montale PistoiaTel.: 0573-9573Fax: 0573-951210www.wynns.it [email protected]
Wynns in NederlandTel.: 00-80025525550 (gratis) Fax: 00-80025525551 (gratis)[email protected]
Wynns in Belgi / en BelgiqueTel.: 03 780 96 59 Fax: 03 780 96 [email protected]