Www.sineco.com. “RS & RT” industrial circular connectors are a range of multiway connectors...
-
Upload
drusilla-barnett -
Category
Documents
-
view
256 -
download
19
Transcript of Www.sineco.com. “RS & RT” industrial circular connectors are a range of multiway connectors...
www.sineco.com
“RS & RT” industrial circular connectors are a range of multiway connectors available in 8 shell sizes and 8 insert arrangements all intermateable. “RS & RT” is equipped with identical shells from military connectors complying to MIL-C-26482 spec.Features and benefits
• Suitable for shielding applications• Available in 8 shell sizes and 9 insert arrangements.• Available in plug and receptacle versions for both male and female contacts.• Different insert orientations possible.• Plastic inserts with flammability rating: UL94-V0.• 2 levels of water protection: Dynamic IP67 and IP68 both versions are IP69K• 2 levels of salt spray: 48h and 96h• Metal bayonet ring:- Metal wave spring loaded- Locks with audible positive “click”- Assures 500 matings and unmatings• Operating temp: -40°C to +105°C or +125°C• Insulation resistance: 5000 MΩ min.• Test potential: 2000 VAC (standard)• RoHS compliant
RS &RT series
Amphenol Sine Systems – NEW PRODUCTS 2009
Insert PolarisationBody variation
0 – standard0W –high density
Insert arrangement
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 1__Plug & Receptacle
Part numbering Sequence( 料号规则)RT 0 6 16 19 P N (H or H6) (Design variation) (Plating)
RTRS
shell size
Notes : Body variation : 0 : Wall mounting receptacle 6 : Cable plug 7 : Jam nut receptacle for rear panel
mountingShell size : 10, 12, 14, 16, 18, 20, 22, 24Insert arrangement :Type of contacts : P : Pin contacts S : Socket contactsInsert polarisation : N : Standard version W, X, Y, Z : Different orientations
(consult factory)
Type of contacts
Application : no letter: standard version (no o-ring)
H : Standard version, water protection IP 67 & IP 69K
H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles)
Design variation : No letter : Standard version Others : Special versionsPlating :No letter : standard is nickel plating (48h
salt spray)1: Black anodised, jam nut (96h salt spray)2: Black anodised coupling ring (96h salt spray)
Application EC- end cap & standard seal for wire 18~14 AWG MM- end cap & reduced seal for wire 24~20 AWG……
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
1. Stamped & formed contact ( 连续模端子 )
SS 20 M (---) 1 F
Contact Type Wire Awg size contact size Contact Packaging Design Variation Plating
SP=Male 14(crimp AWG
14)M=size 16
Blank= 3,000 pc reel
1=wire and insulation crimp for size 20-26
T=Tin
SS=Female16(crimp AWG
18~16)W=size 20 L=loose piece
1=Wire crimp for size 14 & 16
F=Gold Flash
20(crimp AWG 22~20)
A=2.5mm 11=Wire and
insulation crimp for size 16
G=Gold (plating thickness: blank=10u"; if other
thickness, pls label the thickness, for example:
30u", label "G30"
24(crimp AWG 26~24)
12(crimp AWG14~12)
…..
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
2. Machined contact ( 机加工端子 )
MS 20 M (---) 23 F
Contact Type Wire Awg size contact sizeContact
Packaging Design Variation Plating
MP=Male 14(crimp AWG
16~14)M=size 16 Bulk pack 23=crimp barrel T=Tin
MS=Female16(crimp AWG
20~16)W=size 20
12E0**= PCB tail, for RT00( wall mouting
receptacle); "**" is outer length of PCB tail.
F=Gold Flash
20(crimp AWG 22~20)
A=2.5mm
12E7**= PCB tail, for RT07( Jam nut mouting receptacle); "**" is outer
length of PCB tail.
G=Gold (plating thickness: blank=10u"; if other
thickness, pls label the thickness, for example:
30u", label "G30"
24(crimp AWG 26~24)
28(crimp AWG 30~28)
RS8=Radsok 3.6mm,crimp barrel
S=plating silver(5um)
12(crimp AWG14~12)
6 ( Crimp 6~5AWG, 16mm2)
8 ( Crimp 8~7AWG, 10mm2)
…..
Amphenol Sine Systems – NEW PRODUCTS 2009
Order guide 2__contacts
3. Rocksolid contact
MS 20 M (---) 23 F
Contact Type Wire Awg size contact size Contact Packaging Design Variation Plating
RS=Female 14(crimp AWG
16~14)M=size 16 Bulk pack 23=crimp barrel F=Gold Flash
16(crimp AWG 20~16)
W=size 20
G=Gold (plating thickness: blank=10u"; if other
thickness, pls label the thickness, for example:
30u", label "G30"
20(crimp AWG 22~20)
24(crimp AWG 26~24)
…..
RS & RT series different point
Amphenol Sine Systems – NEW PRODUCTS 2009
RS SERIES• RockSolid™ female contact
RT SERIES•Stamped contact
•Formed contact
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
1. Wall mounting receptacle for Pin contacts RT00
针式接触件用法兰盘面板插座Type 1: RT001619PN
Type 2: RT001619PNH
Type 3: RT001619PNHEC
No O-ring
O-ring
End-CapWaterproof:
IP67
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
2. Wall mounting receptacle for socket contacts RT00 孔式接触件用法兰盘面板插座
Type 1: RT001619SN
No O-ring
Type 2: RT001619SNH
O-ring
Type 3: RT001619SNHEC
End-CapWaterproof: IP67
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
3. Jam nut receptacle for Pin contacts RT07 针式接触件用螺帽夹紧插座
Type 1: RT071619PN
Type 2: RT071619PNH
Type 3: RT071619PNHEC
No O-ring
O-ring
End-CapWaterproo
f: IP67
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
4. Jam nut receptacle for socket contacts RT07 孔式接触件用螺帽夹紧插座
Type 1: RT071619SN
Type 2: RT071619SNH
Type 3: RT071619SNHEC
No O-ring
O-ring
End-CapWaterproof: IP67
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
5. Cable plug for pin contacts RT06 针式接触件用线缆插头
Type 1: RT061619PN
Type 2: RT061619PNH
Type 3: RT061619PNHEC
No O-ring
O-ring
End-CapWaterproo
f: IP67
Connector types
Amphenol Sine Systems – NEW PRODUCTS 2009
6. Cable plug for socket contacts RT06 孔式接触件用线缆插头
Type 1: RT061619SN
Type 2: RT061619SNH
Type 3: RT061619SNHEC
No O-ring
O-ring
End-CapWaterproof:
IP67
Backshell solution( 尾部附件解决方案 )__Cord grip
Amphenol Sine Systems – NEW PRODUCTS 2009
1. Shielded cable clamp with strain relief nut for waterprotected applications(IP68)
Picture Sine P/NShell Size
Clamping range (Φ mm min/Max)
Total length (mm)
Thread A
RT0L-10CG-S1
103/6.5
50 9/16 – 24 UNEFRT0L-10CG-S2 5/8.5
RT0L-12CG-S1
126/10.5
5411/16 – 24
UNEFRT0L-12CG-S2 8/12.5
RT0L-14CG-S1
146/10.5
54 13/16 – 20 UNEFRT0L-14CG-S2 8/12.5
RT0L-16CG-S1
169.5/14.5
60 15/16 – 20 UNEFRT0L-16CG-S2 13.5/18
RT0L-18CG-S1
189.5/14.5
601’’ 1/16 – 18
UNEFRT0L-18CG-S2 13.5/18
EMI shielding ring (Beryllium copper)
Thread A
Length
Backshell solution( 尾部附件解决方案 )__Cord grip
Amphenol Sine Systems – NEW PRODUCTS 2009
2. Cable clamp with strain relief nut for waterprotected applications(IP68)
Picture Sine P/NShell Size
Clamping range (Φ mm min/Max)
Total length (mm)
Thread A
RT0L-10CG-C1
103/6.5
50 9/16 – 24 UNEFRT0L-10CG-C2 5/8.5
RT0L-12CG-C1
126/10.5
5411/16 – 24
UNEFRT0L-12CG-C2 8/12.5
RT0L-14CG-C1
146/10.5
54 13/16 – 20 UNEFRT0L-14CG-C2 8/12.5
RT0L-16CG-C1
169.5/14.5
60 15/16 – 20 UNEFRT0L-16CG-C2 13.5/18
RT0L-18CG-C1
189.5/14.5
601’’ 1/16 – 18
UNEFRT0L-18CG-C2 13.5/18
No EMI shielding ringThread A
Length
CORD GRIP ASSEMBLY
Step 1 →
Step 2 →
Step 3 →
Step 4 →
Step 5 →
Amphenol Sine Systems – M23 and M40 Connectors . Confidential Information . For Internal Use Only
EMC Grounding Ring
Backshell solution( 尾部附件解决方案 )__Flexgrip
Amphenol Sine Systems – NEW PRODUCTS 2009
FLEX GRIP ASSEMBLY
Step 1 →
Step 2 →
Step 3 →
Step 4 →
Step 5 →
Step 6 →
Amphenol Sine Systems – M23 and M40 Connectors . Confidential Information . For Internal Use Only
Sealing for wall mounting receptacle(安装在法兰盘插座后面,防水用)
Amphenol Sine Systems – NEW PRODUCTS 2009
RTFD12BRTFD13BRTFD14BRTFD15BRTFD16B
Part number
Metal environmental dustcap receptacles
Amphenol Sine Systems – NEW PRODUCTS 2009
RT010DCG
Part number
RT012DCGRT014DCGRT016DCGRT018DCG
For dustcap without chain skip “G” e.g. RT010DC
Application( 应用 )
Amphenol Sine Systems – NEW PRODUCTS 2009
此产品系列能够广泛代替 MIL-C-26482 系列圆形连接器,具有以下特点:• 卡口式快速连接• 优良的抗振动及冲击特性• 能有效解决屏蔽问题• 优良的耐环境性能• 能有效解决高压及大电流问题• 产品装配使用方便快捷• 模块标准化设计,批量模具生产,性价比高
屏蔽及夹线防水方案
散线防水方案
Amphenol Sine Systems – NEW PRODUCTS 2009
Thank Youfor your
TimeAmphenol Sine Systems – NEW PRODUCTS 2009
www.sineco.com