www.its-tel.comCopyright © July 2004 by ITS1

www.its-tel.comCopyright © July 2004 by ITS2

PanCam-C

PanCam-T

Pancode

Pantel

Pancode

Pantel

Access Control Door Phone Units

www.its-tel.comCopyright © July 2004 by ITS3

Access Control Door Phone FeaturesAll units have the following features:• Connected to the analog port of the PBX

• Internal door opening code from any extension

• Day/Night mode

• High quality speakerphone

• Support 12V AC/DC

• Volume control

• Works in conjunction with card readers and security devices

• Simple to operate and program

www.its-tel.comCopyright © July 2004 by ITS4

PanCam-C

Main Features• Build-in black & white or color high-

quality pinhole camera• Direct dialing to any extension • Speed-dial to internal or external

subscribers • Entry access code• Weather and vandal resistant

www.its-tel.comCopyright © July 2004 by ITS5

PanCam-T

Main Features• Build-in black & white or color high-

quality pinhole camera• Dialing to a pre-defined

extension/subscriber • Weather and vandal resistant

www.its-tel.comCopyright © July 2004 by ITS6

Pancode

Main Features• Direct dialing to any

extension • Speed-dial to

internal or external subscribers

• Entry access code• Outdoor and Indoor

version

Indoor Outdoor

www.its-tel.comCopyright © July 2004 by ITS7

Pantel

Main Features• Dialing to a pre-

defined extension/ subscriber

• Outdoor and Indoor version

Indoor Outdoor

www.its-tel.comCopyright © July 2004 by ITS8

Installation

Connector Wiring

Outdoor Bracket Indoor Bracket

www.its-tel.comCopyright © July 2004 by ITS9

Installation Overview

PBX

Door Lock Relay

P.S.

AnalogPort

www.its-tel.comCopyright © July 2004 by ITS10

Connector

Analog PBX Port

Exit Button

Power Supply (12-24VDC)

Door Lock Relay

External devices

www.its-tel.comCopyright © July 2004 by ITS11

Programming

• Call the Door Phone unit from any extension

• The unit answers and plays a beep

• Dial *900

• Insert password (default = 1234)

• Refer to the Programming Table in the manual

www.its-tel.comCopyright © July 2004 by ITS12

Special Features and Applications

Day/Night mode

This feature allows you to set the “Call” button to a different destination for day and night.

Changing the mode of operation:• Call the unit’s extension number• Press *80 for “Day mode” (Default) or• Press *82 for “Night mode”

www.its-tel.comCopyright © July 2004 by ITS13

Special Features and Applications (Cont’d)

Speed Dial mode

This feature allows you to define the “Speed Dial” codes for each button on the keypad, directing you to different destinations.

Changing to the “Speed Dial mode”:• Call the unit’s extension number• Press *900 + password• Press *152• Start programming (refer to the Programming Table in the manual)

NOTE: For PanCam-C / Pancode only: