www armatherm Armatherm™ Grade FRR · Armatherm™ FRR thermal break material provides low...
2
Introduction Armatherm, Brighton St Shipley, West Yorkshire, BD17 7EB armatherm.com [email protected] Call +44 1274 591115 For all enquiries Armatherm TM Thermal bridging solutions to improve building envelope performance Specifications of Armatherm™ FRR Applications of Armatherm™ FRR Maximum Loading Pressure Compressive Modulus Shear Strength Standard Thickness Thermal Conductivity Minimum Operating Temp Maximum Operating Temp • Beam Connections • Masonry Shelf Angles • Lintels • Canopies • Balconies • Curtain Wall Mullions • Rain Screens • Z Girts • Roof Penetrations 310 N/mm 2 9998 N/mm 2 110 N/mm 2 13mm, 20mm, 25mm & 50mm W/m°K 0.20 1 °C -51 °C 90 1 For comparison, the thermal conductivity of Mild Steel is 56 W/m.K External Steel Work Internal Steel Work Thermal Break Material Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Thermal bridging through steel and concrete framing can have a significant impact on a building’s energy performance. Armatherm™ FRR thermal break material provides low thermal conductivity and high compressive strength. Armatherm™ FRR is made of a reinforced, thermoset resin which is fire resistant, does not readily burn and has very limited creep under load making it the ideal material for use in structural thermal break connections. Armatherm™ Grade FRR Structural Thermal Break Solutions www.armatherm.com
Transcript of www armatherm Armatherm™ Grade FRR · Armatherm™ FRR thermal break material provides low...
Introduction
Armatherm, Brighton StShipley, West Yorkshire,BD17 7EB
[email protected] +44 1274 591115 For all enquiries
Armatherm TM Thermal bridging solutions to improve building envelope performance
Specifications of Armatherm™ FRR
Applications of Armatherm™ FRR
Maximum Loading PressureCompressive ModulusShear Strength Standard ThicknessThermal Conductivity Minimum Operating TempMaximum Operating Temp
• Beam Connections• Masonry Shelf Angles• Lintels • Canopies• Balconies
• Curtain Wall Mullions• Rain Screens• Z Girts• Roof Penetrations
310 N/mm2
9998 N/mm2
110 N/mm2
13mm, 20mm, 25mm & 50mmW/m°K 0.201
°C -51°C 90
1For comparison, the thermal conductivity of Mild Steel is 56 W/m.K
External Steel Work
Internal Steel Work
Thermal Break Material
Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Thermal bridging through steel and concrete framing can have a significant impact on a building’s energy performance. Armatherm™ FRR thermal break material provides low thermal conductivity and high compressive strength. Armatherm™ FRR is made of a reinforced, thermoset resin which is fire resistant, does not readily burn and has very limited creep under load making it the ideal material for use in structural thermal break connections.
Armatherm™ Grade FRRStructural Thermal Break Solutions
www.armatherm.com
Washer and Bushing
Bushing Detail Washer Detail
A thermal break should also be provided at the front side of the bolt head between the steel washer and face of the exterior steel. This prevents a thermal bridge through the bolt which would otherwise provide a path for heat flow through the thermal break assembly. Armatherm™ washers and bushings are recommended to eliminate this path and any potential for condensation within the building envelope. Contact us for assistance with your structural design or thermal calculations.
M12
Bolt Size HoleIn Pad
BushingOD
Bushing ID Hole inStructure
BushingLength(Standard)
14mm 14mm 20mm0.78”24mm1.0”
281.10”32mm1.25”
20mm0.78”24mm1.0”
281.10”32mm1.25”
10mm0.375”13mm0.50”
13mm0.50”17mm0.625”
0.55” 0.55”18mm 18mm0.70” 0.70”
22mm 22mm0.86” 0.86”26mm 26mm1.05mm 1.05mm
1/2”M165/8”M203/4”M241”
M12
Bolt Size WasherID
ThicknessWasherOD
14mm 14mm 6mm0.25”6mm0.25”6mm0.25”6mm0.25”
0.55” 0.55”18mm 18mm0.70” 0.70”22mm 22mm0.86” 0.86”26mm 26mm1.05mm 1.05mm
1/2”M165/8”M203/4”M241”
Armatherm™ Grade FRRStructural Thermal Break Solutions
www.armatherm.com
Armatherm, Brighton StShipley, West Yorkshire,BD17 7EB
[email protected] +44 1274 591115 For all enquiries
Armatherm TM Thermal bridging solutions to improve building envelope performance
