Würth Cutting and Grinding Brochure

Cutting and Grinding DISCS

Disc Identification

Encoded production date

Icons:

Instructions for use

Safety notice

Application restrictions

Article number

Highest cutting speedand maximum rpm’s

OSA-symbol and number

Barcode

Specification and grain

EN-number

Disc classifications

Colour strips stating themaximum cutting speed

Application area

Colour grinding system

Disc dimensions

Steel blue

Non-ferrous metals/aluminum yellow

Stainless steel green

Stone grey

Cast steel black

Grinding of edges, weld seams and surfaces.

Grinding Disc Blue

for steel

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.100 x 6.0 16 15,300 0669 161 006

25115 x 6.0 13,300 0669 161 156

125 x 6.022.2

Curved 12,200 0669 161 256

180 x 8.0 8,500 0669 161 808 10230 x 6.0 6,600 0669 162 306

• Sythetic resin-bound, fibre-reinforced high-performancestandard cutting disc

• For freehand cutting work with an electric or compressedair angle grinder

• High break-resistance

• Max. peripheral speed 80 m/s

• Discs meet the safety requirements of the Europeanstandard EN 12413 and of the OSA (Organization for theSafety of Abrasives)

• Medium-hard disc

• Sythetic resin-bound, fibre-reinforced high-performancestandard grinding disc

• For freehand grinding work with an electric or compressedair angle grinder

• High break-resistance



Cut-off work on full materials, pipes, profiles

and metal sheets.

Cutting Disc Blue

for steel

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.115 x 2.5

22.2 Curved13,300 0669 101 152

125 x 2.5 12,200 0669 101 252

100 x 2.0 16 15,300 0669 101 002 25180 x 3.0

22.2Straight 8,500 0669 101 803

230 x 3.0 6,600 0669 102 303

StandardCutting Discs

Standard Grinding Discs

Cutting Disc Blue

for steel

Cut-off work on metal sheets, pipes, profiles, steel

rope, reinforcing steel.

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.115 x 1.0 13,300 0664 101 150

115 x 1.6 13,300 0664 101 151

125 x 1.022.2 Straight

12,200 0664 101 25025

125 x 1.6 12,200 0664 101 251

180 x 2.0 8,500 0664 101 802

230 x 2.0 6,600 0664 102 302

Speed Cutting Discs

• Specially designed for thin-walled pipes and profiles, thinmetal sheets, car body sheets

• Extremely high cutting capacity; very long service life

• Extremely thin for precise, virtually burr and chatterfreecutting; very clean and cool cutting surfaces

• Work requires minimal effort and helps protect the userand machine

• Minimal build-up of cutting waste and dust

• Low noise output and high break-resistance

Cutting Disc Green

for stainless steel

Cutting Disc Yellow

for non-ferrous metals/aluminium

Cut-off work on pipes, ventilation ducts, metal sheets,

containers, sheet metal constructions, pipesystems, bars,

steel reinforcements, profiles, cable trays and ducts,

high-voltage cables, steel rope, composite materials,

plastics.


125 x 1.522.2 Straight

12,200 0664 121 25125

180 x 1.5 8,500 0664 121 801

230 x 1.9 6,600 0664 122 301

• Free from iron, chlorine and sulphur (≤ 0.1%)

• Meets KWU class II (e.g. for pipe system and reactorengineering)

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.

50 x 1.06.0

30,500 0664 130 501

60 x 1.0 25,000 0664 130 601 5076 x 1.0 10.0 20,100 0664 130 761

115 x 1.0Straight

13,300 0664 131 150

115 x 1.6 13,300 0664 131 151

125 x 1.0 22.2 12,200 0664 131 250 25180 x 1.6 8,500 0664 131 801

180 x 2.0 8,500 0664 131 802

Cut-off work on metal sheets, pipes, profiles, roof

coverings, gutters.

Cutting Disc Blue

for steel

Cut off work on full materials, thick-walled pipes,profiles, metal sheets.

• Synthetic resin-bound, fibre reinforced, high-performancecutting discs

• For freehand cutting work with an electric or compressedair angle grinders

• Very low incidence of breakage

• Minimal measurement and imbalance tolerances



• Very long service life

• Optimum cutting of full materials and profiles

• Very high laterial stability

Longlife Cutting Discs


Curved13,300 0670 101 152

125 x 2.5 22.2 12,200 0670 101 25225

180 x 2.5 8,500 0670 101 802

230 x 2.5 6,600 0670 102 302

300 x 3.5 20.0Straight

5,100 0670 103 023

300 x 3.5 22.2 5,100 0670 103 00310

350 x 4.0* 20.0 5,400 0670 103 524

350 x 4.0* 22.2 5,400 0670 103 504

*maximum working speed: 100 m/sfor use with petrol and electric cutting machines

Cutting Disc Yellow

for non-ferrous metals/aluminium

Cut-off work on cast-irons, full materials, pipes, profiles,

metal sheets.

Cut-off work on stone, board, prefabricated components,

bricks, tiles, clay pipes, roof tiles, clinker.


22.2Curved 13,300 0670 151 152 25

230 x 3.0 6,600 0670 152 303

300 x 3.5 20.0 Straight 5,100 0670 153 023 10300 x 3.5 22.2 5,100 0670 153 003


22.2Curved 13,300 0670 121 152

25230 x 2.5 Straight 6,600 0670 122 302

Cutting Disc Grey

for stone

Grinding Disc Grey

for stone


25125 x 6.0 22.2 Curved 12,200 0670 111 256

180 x 6.0 8,500 0670 111 806 10

For grinding of grey cast iron, stone and synthetic stone,

cleaning of shell bricks, bevelling of edges.

• Synthetic resin-bound, fibre reinforced, high-performancegrinding discs

• For freehand grinding work with an electric or compressedair angle grinders

• Very low incidence of breakage

• Minimal measurement and imbalance tolerances



• An all-round harder disc

• Long service life combined with good metal-removingproperties

Longlife Grinding Discs

Grinding Disc Black

for cast iron

Grinding of cast-irons and edges, deburring, dressing.

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.180 x 8.0 22.2 Curved 8,500 0670 191 808 10

• Particularly long service life combine with good metal-removing properties

• An all-round harder disc.


13,3000670 161 154

115 x 7.0 0670 161 15725

125 x 4.012,200

0670 161 254

125 x 7.022.2 Curved

0670 161 257

180 x 8.0 18,500 0670 161 80810

230 x 8.0 16,650 0670 162 308

Cutting Disc Blue

for steel

Grinding of edges, deburring, dressing of weld seams.

Normal corundumSteel, alloyed and unalloyed, construction steel, tool

steel, soft non-ferrous metals, castings,

hard plastics, wood.

Surface grinding, weld seam finishing, removal of paint,

tool sharpening, plastering and smoothing, deburring

and edge finishing, rust removal, convex grinding.

• High volume of metal removal

• Wide range of applications

• Even grinding pattern until complete consumption of disc

• High flexibility and quiet operation

• Low-vibration grinding

• Low noise level

• Can be used without support disc

• Self-sharpening lamellas, no clogging

Lamella Fan Type Grindin

Aluminum disc• Environment-friendly, since discs recyclable

• Very good heat dissipation via aluminum disc

• Rounded edge of the disc prevents shearing-off of lamellas

Attention: Not suitable for stainless steel!

Ø Hole Max. Grain Curved Straight Pack mm mm rpm Art. No. Art. No. Qty.

40 0579 311 540 –

115 13,30050 0579 311 550 –

60 0579 311 560 0579 511 560

80 0579 311 580 0579 511 580

120 0579 311 512 –

12522.2 12,200

36 0579 312 536 –10

60 0579 312 560 0579 512 560

36 0579 317 836 –

40 0579 317 840 –

178 8,600 60 0579 317 860 –

80 0579 317 880 –

120 0579 317 812 –

Ø Hole Max. Grain Curved Pack mm mm rpm Art. No. Qty.

36 0579 115 36

40 0579 115 40

115 22.2 13,300 50 0579 115 50 1060 0579 115 60

80 0579 115 80

Fabric disc• Multilayer glass fabric disc

Attention: Not suitable for stainless steel!

g Discs

Zirconium corundumEspecially for stainless steel, chromium and nickel alloys.

Steel, alloyed and unalloyed, construction steel, tool

steel, soft non-ferrous metals, castings, hard plastics,

wood.

Surface grinding, weld seam finishing, removal of paint,

tool sharpening, plastering and smoothing, deburring

and edge finishing, rust removal, convex grinding.

Zirconium corundum - aluminum disc• Environment-friendly, since discs recyclable

• Very good heat dissipation via aluminum disc

• Rounded edge of the disc prevents shearing-off of lamellas

Attention: Suitable for stainless steel!

Ø Hole Max. Grain Curved Straight Packmm mm rpm Art. No. Art. No. Qty.

36 0578 311 536 0578 511 536

40 0578 311 540 0578 511 540

115 13,30050 0578 311 550 0578 511 550

60 0578 311 560 0578 511 560

80 0578 311 580 0578 511 580

120 0578 311 512 0578 511 512

36 0578 312 536 0578 512 53610

125 22.2 12,20040 0578 312 540 –

60 0578 312 560 0578 512 560

120 0578 312 512 –

36 0578 317 836 –

178 8,600 60 0578 317 860 –

80 0578 317 880 –

Zirconium corundum - fabric disc• Multilayer glass fabric disc

Attention: Suitable for stainless steel!

Ø Hole Max. Grain Curved Packmm mm rpm Art.No. Qty.

24 0578 115 24

36 0578 115 36

40 0578 115 40

115 22.2 13,30050 0578 115 50

1060 0578 115 60

80 0578 115 80

120 0578 115 120

150 0578 115 150

Topsize Plastic Discs

Ø Hole Max. Grain Curved Straight Packmm mm rpm Art. No. Art. No. Qty.

40 0578 211 540 0578 611 540

115 13,300 60 0578 211 560 0578 611 560

22.2 80 0578 211 580 0578 611 580 10

125 12,20040 0578 212 540 –

80 0578 212 580 –

• Topsize coating (special zirconia corundum with coolingmultiple bonding and active grinding fillers)

• Especially soft and cool grinding

• Extremely long service life

• Low noise level

• Even grinding performance up to complete wear of thegrinding lamellas

• Strong self-sharpening effect of the abrasive grain, no”rounding” of grit points

• ”Slim” carrier disc made from fiberglass, reinforcedpolyamide

• Absolutely heat and cold resistant (+180°C to –40°C), thusno deformation or cracking during grinding

• No side-slipping of the plastic disc

Nylon Fibre Grinding Wheelseffective cleaning without damaging base metal

Cup Wheels• For use with your air and electric angle grinders

Double discs • With integral arbour shaft, the supporting plastic flanges

can be broken off in steps as discs wear down

Ø mm Working speed rpm Art. No. Pack Qty.100 6000 0585 210 0

5/1125 6000 0585 212 5

150 4000 0585 215 0 3/1

Ø mm Working speed rpm Art. No. Pack Qty.100 6000 0585 310 0 5/1

Ø Working Art. No. Pack Arbour Packmm speed rpm Qty. Art. No. Qty.100 3500-4500 0585 110 0 10/1 0585 110 01 1150 2500-3000 0585 115 0 5/1 0585 115 01 1

Ø x thickness Hole Design max. Art. No. Pack mm mm rpm Qty.115 x 1.0 22.2 Straight 13,300 0669 031 150 25

with self sharpening characteristics due to crystal shatteringalong pre-determined stresslines exposing new cutting edges

• Increased abrasive life

• Maximum stock removal

• Less clogging due to cooler operating temperature

• Ensure a backing support pad is used at all times

Flexible Grinding Discsflexible backing for use with angle grinders

Zirconia Abrasives

Nylon Backing Padsfor Angle Grinders

Ø external/internal mmGrain 100 x 16 (4”) 115 x 22 (4.5”) 180 x 22 (7”) Pack

Art. No. Art. No. Art. No. Qty.24 0580 010 024 0580 011 524 0580 018 024

36 0580 010 036 0580 011 536 0580 018 036100/25

50 0580 010 050 0580 011 550 –

80 0580 010 080 0580 011 580 –

ext. Ø x int Ø mm Thread Ø Art. No. Pack Qty.

115 x 22 M14 x 2.0 1586 104

100 x 16M10 x 1.25 1586 910 125 6/1M10 x 1.5 1586 910 15

Super Thin Cutting DiscsFor Stainless Steel• High performance fibre reinforced cutting disc

• Lasts several times longer than conventional cutting discs

• Contains no iron sulphur (0.1%)

• No formation of rust on the cutting or spark impact point

• Reduced cutting waste, reduction in cutting dust

• Maximum. circumferential speed 80 m/s

Associated Products

HEALTH AND SAFETY

THE ASSEMBLY PROFESSIONALS

Health and Safety 1999 16

for work protection when cutting and grinding• Gloves

• Goggles / Face Shields

• Masks

• Ear Muffs / Ear Plugs

• Overalls

• First Aid Dispensers / Eye Wash

Angle Grinder

115mm - 600W• Spindle lock

• Arbor 22mm

• No-load speed 11,000/min

• Wrench/side handle

0702 480 0

Arbors

for Cutting and Grinding Discs

Design Total length mm Art. No. P. Qty.6 mm shaft, for hole Ø 6.0 mm

600669 976

16 mm shaft, for hole Ø 10.0 mm 0669 978

Würth UK Ltd.

1 Centurion Way

Erith • Kent • DA18 4AE

Tel 0870 5 98 78 41

Fax 0870 5 98 78 42

www.wurth.co.uk

WU

K/a

a •

08

/06

• 1

99

9 1

6

Würth Cutting and Grinding Brochure

Documents

Transcript of Würth Cutting and Grinding Brochure