Ring Stick Up Cam Battery ReplacementIn this guide, we will show you how to replace the battery in a Ring Stick Up Cam.

Written By: Nicholos Frey

Ring Stick Up Cam Battery Replacement Draft: 2019-04-14Guide ID: 119959 -

This document was generated on 2019-09-22 04:41:40 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

INTRODUCTION

In this guide, we will show you how to open the Ring Stick Up Cam housing and remove the batteryfrom the device. You will need a Phillips #00 screwdriver and a plastic opening tool.

TOOLS:Phillips #00 Screwdriver (1)iFixit Opening Tools (1)

Ring Stick Up Cam Battery Replacement Draft: 2019-04-14Guide ID: 119959 -

This document was generated on 2019-09-22 04:41:40 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Step 1 — Battery

Remove the six 6mm Phillips #00screws from the back of the device.

Step 2

Pry off the aluminum plate using aplastic opening tool.

Ring Stick Up Cam Battery Replacement Draft: 2019-04-14Guide ID: 119959 -

This document was generated on 2019-09-22 04:41:40 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Step 3

Remove the two 6mm Phillips #00screws that were under thealuminum plate.

Step 4

Pry off the back cover using a plasticopening tool.

Ring Stick Up Cam Battery Replacement Draft: 2019-04-14Guide ID: 119959 -

This document was generated on 2019-09-22 04:41:40 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

To reassemble your device, follow these instructions in reverse order.

Step 5

Disconnect the battery power leadsusing a plastic opening tool.

Step 6

Use a plastic opening tool to loosenthe adhesive holding the battery inplace and remove the battery byhand.

Ring Stick Up Cam Battery Replacement Draft: 2019-04-14Guide ID: 119959 -

This document was generated on 2019-09-22 04:41:40 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5