Wrestling Mat Handling, Storage, and Transportation Products

The winch loaded Mat Rack® is a mobile system for suspending three mat sections in a triangular configuration and minimizes the size of this mobile unit. It is most often used to deliver your mats to the competition area, off load them, and then stand by for pickup and removal at the end of the event. With a loaded dimension of 5’ 6” wide, 6’ 5” high and 17’ 8” long, it moves through a standard sized double door, and fits into most storage closets. The 5’ diameter caster wheels operate effectively on any smooth, hard surface, and two to three people can roll it in any direction for any distance. Our winch is easily operated by one adult with minimum effort. The Winch Loaded Mat Rack® has a shipping weight of 700 lbs., and can be assembled and ready for use in about 2 hours.

The manual loaded Mat Rack® is a mobile system designed for suspending three mat sections for the budget conscious purchaser. This product gets your mats up off the floor where they’ll be safe and secure. It is the lower portion of our Model MR3, and it requires four adults to load your mat sections. Two lower sections rest on the frame, and the third settles on top of and in between the lower two. It’s a very effective product for both transportation and storage. The upper frame of Model MR3 may be purchased as a future option should you ever wish to load your mats with the winch mechanism. The Manual Loaded Mat Rack® has a shipping weight of 450 lbs., and can be assembled and ready for use in about 1 hour.

The Mat MateTM wrestling mat transportation system was introduced along with the Mat Rack® in 1985 because there were no high quality, single mat section transporters available. It continues to be the premier product for that purpose. Our exclusive Lifting Handle provides the necessary leverage to transfer your mat from the floor to the Mat Mate frame, and our Rubber Glides along the frame side make sure your floors can never be damaged. Six, heavy duty, smooth rolling caster wheels allow you to effortlessly move your mat sections anywhere you wish to take them, even through a standard sized single door. Our lightweight design means it is simple to handle, and it perfec-tly compliments the Mat Rack® and the Wall RackTM. It has a shipping weight of 100 lbs., and can be assembled in less than 20 minutes.

Holds 3 mat sections up to 14’ long & 32” wide each Fabrication: 14 gauge, zinc plated steel Frame dimensions: 4’ wide, 6’ 5” high and 17’ 8” long (aprox. 5’6” wide loaded) Weight: 600 lbs. Cables: 7 x 19 galvanized aircraft cable. 7000 lb. Test Four 5” non-marking, polyurethane caster wheels, each with a 1200 lb. capacity

Holds 3 mat sections up to 14’ long & 32” wide each Fabrication: 14 gauge, zinc plated steel Frame dimensions: 4’ wide, 32” high and 16’ 6” long (aprox. 5’6” wide loaded) Weight: 600 lbs. Cables: 7 x 19 galvanized aircraft cable. 7000 lb. Test Four 5” non-marking, polyurethane caster wheels, each with a 1200 lb. capacity

Holds one mat sections, 14’ long and 32” in diameter Fabrication: 11 gauge, zinc plated steel Frame size: 32” wide, 16” high, 8.6” long Weight: 75 lbs Six 2”, polyurethane, double caster wheels, each with a 175 lb. capacity

The Wall Rack™ wrestling mat storage system makes effective use of storage space. This is the hallmark of the Wall Rack™ system. It was introduced in 1989 to meet the need for a stationary rack that utilizes as little wall and floor space as possible. Because the three sections are stored in a vertical line, the lower mat section only protrudes approximately 4’ from the wall, which allows room for all your other physical education equipment. The winch and loading procedures are identical to our Model MR3. This unit permanently attaches at four points on the floor and four points on the wall, so you can be certain it will never move. Customized sized units are popular with this model. Itís perfectly complimented by our Model MM1, the Mat Mate, as that unit will deliver mat sections to and from the storage and competition areas, with no lifting. The Wall Rack has a shipping weight of 750 lbs, and can be assembled, installed and ready for use in about 4 hours.

The Resi-WheelerTM portable transportation device was designed to move mat sections over long distances and low lying obstacles. Many school districts use these to transport their mats from school to school. Once loaded, a mat section can be moved by one person. See our Intro-duction To The Mat Rack System Video for a glimpse of this great product.

desi

gn b

y: c

ox-s

tudi

o.co

m

Holds three mat sections up to 14’ long & 32” wide each Fabrication: 14 gauge, zinc plated steel frame dimensions: 3’ wide, 9’11” high, 17’8” long (approx 4’ wide loaded) Weight: 650 lbs.

Holds one mat section, 14’ long and 32” in diameter Fabrication: 1” hollow tubular steel Frame size: 22” wide, 18” high, 62” long Weight: 45 lbs Two wheels

If your racks are stored in an active area, you’ll want a set of padded Bumper Guards to reduce the chance of impact type injuries. Constructed with 3/4”stained and treated plywood, and wrapped in RESILITE’s Kwik-Stik foam, they’ll offer you years of maintenance free service. They attach with a belted, nylon strap, and are easy to install and remove.

The Mat SackTM protects your valuable mats. The Mat Sack™ protective covering for wrestling mats protects your valuable mats Many school districts find that their mats are often damaged when being moved, or by vandalism. The Mat Sack solves those problems. Each Mat Sack is made with a tough, 18 oz. vinyl coated nylon fabric, and they come in a variety of school colors for you to choose from: navy blue, royal blue, yellow, red, kelly green, tan, orange, gray, black. They’re made in three sections, each 14’ in length, and each has five velcro mat straps sewn in. Custom sized sections are available upon request. Simply roll your mats up tightly [be sure to use your cardboard mat tubes], and then secure with the straps.

Mat Straps keep your mat from unrolling, which makes it much easier to move and store. Please be sure to have at least four mat straps per mat section on hand. Space approximately 3 - 4’ apart, and pull the straps just tight enough to be secure. Our straps are made from tough woven nylon and are secured with D-Rings. Each strap is 9’ in length.

Never discard the Mat Tubes that come with your mat.

They’re an integral part of the Mat Rack System. They make mats easier to roll up, and far easier to lift and transport. Please be sure to periodically roll your mats from the opposite ends to discourage wrinkling. A standard sized mat tube is 8” in diameter and 12’ in length. Custom sizes are available upon request.

Length - 18’ 4” Width - 4’ 6” Height - 6’ 7”

Length - 16” 6’ Width - 4’ 6”Height - 3’ 1”

Length - 18’ 4” Width - 3’ 6” Height - 9’ 11”

All of our Mat Rack System accessory products have been designed to protect your wrestling mats, allow for easier handling, and extend their life between reconditioning. Please carefully review each item to determine which items will serve your needs.

Includes everything you need to repair minor damage to your mats: paint (two colors), glue, solvent and caulking. Comes with repair instructions. Be sure to specify paint colors.