WPA- Propeller Industry Fan
-
Upload
ho-ngoc-thanh-quang -
Category
Documents
-
view
227 -
download
16
Transcript of WPA- Propeller Industry Fan
-
WALL MOUNTED AXIAL PROPELLERFEATURES
315mm to 1000mm diameter.
Volume flow from 0.4m3/s to 30m3/s.
Static pressure up to 100 Pa.
Mild steel construction with a high quality epoxy powder coating or hot dip galvanised.
Impellers have GRP blades or die-cast aluminum adjustable blades.
IEC standard or smoke extract motors, single or two speed; with protection guard as an option.
MOTOR
Totally enclosed squirrel cage induction motor specially designed for minimum power consumption to cater for the desired fan characteristic. Motor are provided with following features :
Class F insulation (Class H optional). Electricity Supply : Single / Three Phase. IP 55 protection.
ORDERING CODE
WPA 630 - 20- 4
4 4 Pole
20- Pitch Angle
630 Impeller Diameter
WPA Wall Plate Axial
3095514209001501020970900WPA 900
308401415800120950900800WPA 800
307501415710120815800710WPA 710
306851415630120750710630WPA 630
306151415560120670630560WPA 560
255501412500120630590500WPA 500
254951012450120550510450WPA 450
254501012400120510480400WPA 400
25405912355100460420355WPA 355
20360912315100430390315WPA 315
IHGFEDCBAMODEL
DIMENSIONSIn metric, mm
Minh sonRectangle
-
WALL MOUNTED AXIAL PROPELLER
PERFORMANCE CURVES
Systemair Sdn Bhd
Lot 3692, Kampung Jaya Industrial Area,Jalan Kusta, 13 Miles,4700 Sungai Buloh, Selangor, Malaysia.
Tel : 60(3) 6157 1177Fax : 60(3) 6156 6618Email : [email protected] : www.systemair.com