WP1 Series LED Wall Pack
description
Transcript of WP1 Series LED Wall Pack
WP1 Series Wall Pack WALL MOUNT LIGHTING
DESCRIPTION
The ActiveLED® WP1 Series Wall Pack is designed to provide buildings with a safer, more secure environment by generating a perimeter with a clean, even pattern of light. With nearly 750 sq. ft. of light coverage (Fixture mounted at 10’), the WP1 Series Wall Pack is an ideal choice to provide light for security cameras or brighten areas around a buildings entrance and exit locations.
Applications include: Warehouse, Retail, Industrial, and Commercial Locations.
PROJECT INFORMATIONProject Name
Catalog No. Date
WP1 Series Wall Pack
DIMENSIONS FEATURES
• ActiveREST™ Dimming Technology - Optional fixture dimming capa-bility when full light levels are not required. EXAMPLE - Dimming level 40 equates to less than 9% of actual watts being consumed.
• ThermalDRAW™ Cooling Technology - Patented cooling technology ensures LED components will equal or exceed warranty.
• Battery Backup Enabled - This option provides 48V DC support for an Emergency Battery Backup Unit (BBU sold separately) creating an Emergency LED Light Fixture.
• Dusk/Dawn Sensor - Optional photocell allows fixture to automati-cally turn on or off based on daylight detection.
• IR Receiver Plus Motion - Optional remote passive infrared (PIR) motion sensor with IR receiver for programmable Vacant-to-OFF and Vacant-to-Dim level programming.
• IR Receiver - Optional integral IR sensor only for ON-to-Dim pro-gramming.
• Warranty - 10 Year Warranty on LED elements and fixture housing, 5 Year Warranty on Driver: 10 Year Warranty on Driver if used with ActiveLED Surge Protection. See page 2 for additional warranty in-formation.
A B C
18.8” 8.8” 8.1”
47.9 cm 22.4 cm 20.1cm
MOUNTING OPTIONS
LIGHT OUTPUT WATTS LUMENS per WATT LIGHT COLOR (CCT)
3,019 lm 39.7 W 76 lm/W 5050 K
TOP
FRONT
SIDE
A
C B
When Wall Pack and Bracket are connected together, a 1” “Junction Box” for AC Cables
is formed
0.9” Dia Hole Aligns to Hole in Wall Pack Fixture
Mounting Holes (4) Align to Existing Holes
in Wall Pack Fixture
Bracket Part Number: 00-27-0008-0004A
NOTE: Lighting Facts shown for Wp1, 36W only. For more Lighting Facts, visit lightingfacts.com for the Label and Label Reference Guide.
PHOTOMETRICS PERFORMANCE DATA
AMBIENT TEMPERATURES 0 HOURS 45,000 HOURS 90,000 HOURS
77°F (25°C) 1.00 0.99 0.99
104°F (40°C) 1.00 0.98 0.96
131°F (55°C) 1.00 0.96 0.92
140°F (60°C) 1.00 0.95 0.90
Projected Lumen Maintenance (TM-21)NOTE: Calculated using data collected according to LM-80 lumen maintenance on the LED package.
GENERAL SPECIFICATIONS
Input Voltage Auto-sensing, 100-277 Volts AC, 50/60 Hz; Auto-sensing, 300-480 Volts AC, 50/60 Hz
Input Power 20 or 40 Input Watts, 18 or 36 LED Watts
Power Factor > 0.95 (at ~100-277 Volts)
THD Total Harmonic Distortion (THD) <20% (typical 9.9%)
Driver Integral driver with Aluminum Housing, integrated intelligent controls and integral heat sink
Operating Temperature -58° F to 149° F (-50° C to 65° C)
Lumen Lifetime L90/90K Hrs @ 60° C (90,000 Hrs with 90% Luminous Flux)
LED Optics IP66 rated, thermally bonded LEDs, borosilicate glass lens w/silicone sealing. Patented thermal management mounting system
CCT 2700K, 3000K, 3500K, 4000K, or 5000K
Housing 0.250 thick sheet aluminum for enclosure and heat sinking parts, stainless steel hardware
Finish Powder coated after fabrication
Dimensions 18.8”(l) x 8.8”(h) x 8.1”(d) (47.9 x 22.4 x 20.1cm)
Weight 9 pounds (4kg)
WARRANTYTen (10) Year Warranty - LEDs will produce at least 90% of their initial light output with no color shift after 90,000 hours of operation. When using an ActiveLED surge protection device (ordered and installed separately) the driver warranty can be extended from five (5) years to ten (10) years.
LISTINGS AND TESTScUL listed, CE, suitable for exterior locations. RoHS compliant. IP66 Rated optical assembly. LM-79 and LM-80 info available. Conforms to FCC Part 15.19 Subpart B Class A. Made in USA - ARRA Compliant
ORDERING INFORMATION Example: WP1U-WN5018SL-D
Style Voltage Optics Diffuser CCT Watts Color Options
WP1Wall Pack
U - 100-277 VAC, 50/60 Hz.
J - 300-480 VAC, 50/60 Hz., Digitally & BBU Enabled
N - None1
E - 45/48 VDC Driver2
WTraditional
Wall Pack Pattern
WETraditional with Integral Battery
Backup
NNone
505,000K
404,000K
353,500K
303,000K
272,700K
1818W LED, 20W Max
(1500 Lumens)
3636W LED, 40W Max
(3019 Lumens)
Lumens at 5,000K
SLSilver
BKBlack
BRBrown
BZBronze
CGCharcoal
WHWhite
XCustom
DDusk-to-Dawn
JDusk-to-Dawn w/ Motion Sensor
MMotion w/ IR Receiv-er, Programmable
PPigtail, 6’ AC Indoor Whip
QPigtail, 10’ AC Outdoor Whip
RIR Receiver Only, Programmable
1 Requires remote driver. Consult factory.2 No AC Support.
© 2016 ActiveLED, a division of Ringdale®, Inc. Because of continued product improvements, ActiveLED reserves the right to change specifications without notice. Ringdale®, ActiveLED®, ActiveLED Logo, and LightSPACE® are registered trademarks of Ringdale, Inc.
101 Halmar Cove | Georgetown, TX 78628 | 512-288-9080 | 512-288-7210 fax | ActiveLED.com 2200 01.11.2016
NWP1
NOTE: Photometrics shown for WP1, 36W only. Contact company for photometrics on other sizes.