Woven Bag Turnkey Machinery Manufacturer from Taiwan Golden Point Machinery Co. Ltd
Transcript of Woven Bag Turnkey Machinery Manufacturer from Taiwan Golden Point Machinery Co. Ltd
Whole Plant Auto-matic
Machines for the PP Woven Manufac-
turing(Software Controlled)
Whole Plant Automatic Machine
Woven Bag Production Project
Water Cooling One Stage Extend Flat Yarn Extrusion Line
PP Raw Material Flat Yarn
Printing Station Features
• Safety precaution: When the main driver motor stops, printing cylinders are lifted au-tomatically and inking recycle system.
• Ink circulation system is available.• Fabric changing device for continual printing
without disabling the machine.
Tubing Station Features
• Web aligner system of extruder for accurate laminated location.
• Special design of adjustment device for accurate gusseting depth.
• Tension controller for reducing wrinkles after action of gusseting.
Cutting-Stitching-Sealing station Features
• Equipped servo motors for stable output of cutting and sewing.
• Equipped with mark sensor for automatically detecting errors of printing, then exhausting it.
• Special designed thermal bonding device for bottom sealing more closed.
Features of Automation Production Line
• Fully automation (software controlled)• Fully adjustable (software auto set-
ting or manual control)• Printing-Tubing-Cutting-Sewing-Seal-
ing process within one production line.
• Suitable for paper bags or woven bag with
lamination production• 4 labor reduction compared to tradi-
tional production line.
Comparison
TRADITIONL MACHINEAUTOMATION
PRODUCTION LINE
Printing-tubing process 3 workers
Entire process is completely automatic from printing-tubing-cutting-sealing/stitching( 3 workers).
Sealing/ stitching process 4 workers
Maximum stitching production :45 bags/min
Maximum stitching production : 35 bags/min Maximum sealing : 60 bags/min
Maximum sealing : 40 bags / min
Comparison
Advantage of automation production line
compared to traditional machines:
• 6 Less workforce.
• Defective Rate decreased by 50%.
• Bag production speed increase by 40%.
• A 40% decrease of working capital.
www.top-goldenpoint.com
FREE TRAINING Client could send staff engineer to Golden Point Machinery warehouse
in Taiwan for inspection, installation training and maintenance.
WE will provide free technical training and maintenance after installation.
Provide High Quality Machines
Provide Great Customers Service
Distributor
END BUYER
2015 NEW RELEASE
1. Advanced automatic splicing & feeding mechanism- Allow for high speed & ultra-fast laminating job changes without stopping the machine.
2. Pneumatic control impression roller – Easy to operate both up and down.
3. Double layer drying system with high load capacities and adjustable temperature controls make efficient drying possible.
4. Our dry laminating machine is applicable to laminate PET, CPP, OPP, PP, PE, Nylon, Aluminum Foil, Paper…etc.
Dry & Solventless Combi Laminating
Model: GPDSL-1500
2015 NEW RELEASE
1. Advanced automatic splicing & feeding mechanism- Allow for high speed & ultra-fast laminating job changes without stopping the machine.
2. Pneumatic control impression roller – Easy to operate both up and down.
3. Double layer drying system with high load capacities and adjustable temperature controls make efficient drying possible.
4. Our dry laminating machine is applicable to laminate PET, CPP, OPP, PP, PE, Nylon, Aluminum Foil, Paper…etc.
Dry Laminating MachineModel: GP-LII-100
2015 NEW RELEASE
Outstanding Features:1. Computer controlled high speed
slitting machine.
2. High performance trim edge removal system.
3. Suited for both razor knife and counter knife; easy exchanging of the tools.
4. Apply to both paper and plastic film slitting.
Technical Parameters: Web width range : 600~1600 mm
Machine speed 300/400/450 m/min
Unwind diameter: φ 800 φ 1000 mm
Rewind diameter: φ 450 φ 550 mm Min. slit width: 50 mm
(the rewind diameter is 450 mm)
Slitting MachineModel: GPS - 1300
2015 NEW RELEASE
Outstanding Features:1. High speed inspecting printing
quality and rewinding rolled material2. Shaftless system for unwind &
rewind unit3. Quick change over for 3” & 6”
chunks4. Auto control, pre-set type &
automatic stop5. Electro-control system; PLC system
Outstanding Features: Web width range 600 to 1300 mm
Machine speed 150/200/300 m/min
Unwind diameter: φ 600 φ 800 mm
Rewind diameter: φ 600 φ 800 mm
Inspection & Rewinding MachineModel: GP-IR