Hydrodynamic characteristics of the modified V-shaped Semi ...
WORLD´S FIRST MASS PRODUCED V-SHAPED INTERCEPTORS BY … · WORLD´S FIRST MASS PRODUCED V-SHAPED...
2
NEW WORLD´S FIRST MASS PRODUCED V-SHAPED INTERCEPTORS BY ZIPWAKE PRESS RELEASE NOVEMBER 15 TH 2016 The V-shaped interceptors make the successful series S even more versatile and highly competitive. V-shaped interceptors for centerline mounting are perfect for filling the gap between twin outboards or sterndrives, as well as dual propeller tunnels. The new four V-shaped interceptors cover deadrise angles effectively between 11 to 24 degrees. V-shaped centerline mounted interceptors can be in- cluded in new installations, or retro-fitted to already installed systems. The modular design enables boat designers to develop their own novel applications, e.g. in multihulls or stepped high-speed craft. In combination with Zipwake straight interceptors or alternatively mounted as a single unit, the V-shaped interceptor further increases flexibility in installation and application in boats of different hull design and engine options. The V-shaped interceptors contribute to achieve a near full beam interceptor arrangement for optimal lift efficiency, inherently requiring a small blade stro- ke of just 30 mm. In addition, interceptors are signi- ficantly faster than conventional trim tabs and their A new line of V-shaped interceptors are the latest addition to the Zipwake range of Interceptors for Dynamic Trim Control of power boats. use consequently enables the possibility to rapidly respond to external forces acting on the boat to ma- intain the boat’s desired pitch and roll angles for bet- ter performance, fuel economy, comfort and safety. For more information: Zipwake AB, Sweden Göran Fredin T: +46 (0)732 66 11 11 E: [email protected] www.zipwake.com Zipwake at METS 2016: Stand no. 07.325 www.zipwake.com
Transcript of WORLD´S FIRST MASS PRODUCED V-SHAPED INTERCEPTORS BY … · WORLD´S FIRST MASS PRODUCED V-SHAPED...
NEW
WORLD´S FIRSTMASS PRODUCED V-SHAPEDINTERCEPTORS BY ZIPWAKE
PRESS RELEASE
NOVEMBER 15TH 2016
The V-shaped interceptors make the successfulseries S even more versatile and highly competitive. V-shaped interceptors for centerline mounting are perfect for filling the gap between twin outboards or sterndrives, as well as dual propeller tunnels.
The new four V-shaped interceptors cover deadrise angles effectively between 11 to 24 degrees.
V-shaped centerline mounted interceptors can be in-cluded in new installations, or retro-fitted to already installed systems. The modular design enables boat designers to develop their own novel applications, e.g. in multihulls or stepped high-speed craft.
In combination with Zipwake straight interceptors or alternatively mounted as a single unit, the V-shaped interceptor further increases flexibility in installation and application in boats of different hull design and engine options.
The V-shaped interceptors contribute to achieve a near full beam interceptor arrangement for optimal lift efficiency, inherently requiring a small blade stro-ke of just 30 mm. In addition, interceptors are signi-ficantly faster than conventional trim tabs and their
A new line of V-shaped interceptors are the latest addition to the Zipwake range of Interceptors forDynamic Trim Control of power boats.
use consequently enables the possibility to rapidly respond to external forces acting on the boat to ma-intain the boat’s desired pitch and roll angles for bet-ter performance, fuel economy, comfort and safety.
For more information:Zipwake AB, SwedenGöran FredinT: +46 (0)732 66 11 11E: [email protected]
Zipwake at METS 2016: Stand no. 07.325
www.zipwake.com
BRIDGECONTROL PANEL
FLYBRIDGECONTROL PANEL
NMEA 2000network
Ignition key sense
External GPS option
3 flybridge panels possible
Up to 6 interceptors
Supply 12–32 V DC
I-BUS (CAN Bus)
DISTRIBUTION UNIT
CENTER INTERCEPTOR
INTERCEPTORS INTERCEPTORS
300 mm
115 mm
450 mm
600 mm
750 mm
115 mm
13°
16°
19°
22°
161.5 mm
115 mm 174.1 mm
115 mm 187.1 mm
115 mm 200.5 mm
450 mm
56 mm
23 mm
30 mm
IT750-S
IT600-S
IT450-S
IT450-S V13
IT450-S V16
IT450-S V19
IT450-S V22
IT300-S
300 mm
115 mm
450 mm
600 mm
750 mm
115 mm
13°
16°
19°
22°
161.5 mm
115 mm 174.1 mm
115 mm 187.1 mm
115 mm 200.5 mm
450 mm
56 mm
23 mm
30 mm
IT750-S
IT600-S
IT450-S
IT450-S V13
IT450-S V16
IT450-S V19
IT450-S V22
IT300-S
SYSTEM OVERVIEW
V-SHAPED INTERCEPTORS STRAIGHT INTERCEPTORS
Follow us
