Worksite Scaffolding Safety
1
The majority of scaffold accidents on the construction site are caused by falls, slipping or being struck by an object from above. All of these accidents can be prevented by taking the proper precautions. Here’s how. General Safety Tips • To prevent slipping hazards, conduct a daily routine inspection to ensure all walking and working surfaces are free from potential hazards. If you spot a hazard, remove it. • Never move, dismantle or alter a scaffold unless under the supervision of a qualified person while doing such activities. • Never move a scaffold with workers still on it. • Keep scaffold loads below maximum capacity and remove your equipment when the scaffold is not in use. • Be alert for bad weather. High winds and driving rain and snow can be dangerous when working at high levels. Protection for Those Below • Always hoist up heavy tools, equipment and supplies, rather than carry them up by hand. • There must be a 3½”-high toeboard to prevent things falling off a scaffold. If things on the scaffold are taller than 3½” (above the toeboard) other systems, like debris nets, must be used to catch falling tools or materials. • Always wear a hard hat when working on and around a scaffold. • Never walk under or near the scaffold if roped off when work is being performed above. Fall Protection Basics To help protect you against potentially deadly falls, fall protection is needed when working 6 feet or more above a lower level, and consists of either a personal fall arrest system or guardrail systems, depending on the job. If using a fall arrest system, keep the following in mind: • Always attach your lanyard to a vertical lifeline, horizontal lifeline or scaffold structural member. • If you are using a vertical lifeline, make sure that you are fastened to a fixed safe point of anchorage, independent of the scaffold. This includes structural members of buildings, but not standpipes, vents, electrical conduit, etc. They may give way under the force of a fall. • Clean and test your gear regularly, and • never tamper with your fall protection system. When working on scaffolding, your safety is our top priority. Make it yours, too! WORK SITE SCAFFOLDING SAFETY This briefing is intended for general information purposes only. It should not be construed as legal advice or legal opinion regarding any specific or factual situation. Always follow your organization's policies and procedures as presented by your manager or supervisor. For further information regarding this briefing, contact your Safety Director at 877.398.3046. MSI BRIEFING
Transcript of Worksite Scaffolding Safety
The majority of scaffold accidents on the construction site are caused by falls, slipping or being struck by an object from above. All of these accidents can be prevented by taking the proper precautions. Here’s how.
General Safety Tips• To prevent slipping hazards, conduct a daily
routine inspection to ensure all walking andworking surfaces are free from potential hazards.If you spot a hazard, remove it.
• Never move, dismantle or alter a scaffold unlessunder the supervision of a qualified person whiledoing such activities.
• Never move a scaffold with workers still on it.
• Keep scaffold loads below maximum capacityand remove your equipment when the scaffold isnot in use.
• Be alert for bad weather. High winds and drivingrain and snow can be dangerous when workingat high levels.
Protection for Those Below• Always hoist up heavy tools, equipment and
supplies, rather than carry them up by hand.
• There must be a 3½”-high toeboard to preventthings falling off a scaffold. If things on thescaffold are taller than 3½” (above the toeboard)other systems, like debris nets, must be used tocatch falling tools or materials.
• Always wear a hard hat when working on andaround a scaffold.
• Never walk under or near the scaffold if roped offwhen work is being performed above.
Fall Protection BasicsTo help protect you against potentially deadly falls, fall protection is needed when working 6 feet or more above a lower level, and consists of either a personal fall arrest system or guardrail systems, depending on the job. If using a fall arrest system, keep the following in mind:
• Always attach your lanyard to a vertical lifeline,horizontal lifeline or scaffold structural member.
• If you are using a vertical lifeline, make surethat you are fastened to a fixed safe point ofanchorage, independent of the scaffold. Thisincludes structural members of buildings, but notstandpipes, vents, electrical conduit, etc. Theymay give way under the force of a fall.
• Clean and test your gear regularly, and
• never tamper with your fall protection system.
When working on scaffolding, your safety is our top priority. Make it yours, too!
WORK SITE SCAFFOLDING SAFETY
This briefing is intended for general information purposes only. It should not be construed as legal advice or legal opinion regarding any specific or factual situation. Always follow your organization's policies and procedures as presented by your manager or supervisor. For further information regarding this briefing, contact your Safety Director at 877.398.3046.
MSI BRIEFING
