Workshop on Internet of Things, and its Applications using ...
Transcript of Workshop on Internet of Things, and its Applications using ...
The Department of CSE, MVJ College of Engineering, organized a two-day Workshop
on ‘Internet of Things, and its applications using TIVA’, on 18th and 19th February 2019, at
Seminar Hall 6. The purpose of this Workshop was to expose the students to the basic concepts
of Internet of Things (IoT), with hands-on training using advanced development tools from
Texas Instruments.
The Guest Trainers were Mr. Balaji and Mr. Javad, who are Corporate Trainers from
Edgate Technologies Pvt. Ltd. 77 students registered for the Workshop.
The students (4th and 6th semester - CSE) and faculty members arrived by 8.45 am for
the inauguration of the Workshop. The event started at 9.00 am with a Welcome Speech by
Mr. Vinay Pradeep N (AP/CSE). Mr. Balaji (Embedded System Engineer - Edgate
Technologies Pvt. Ltd.), Mr. Javad (Application Engineer - Edgate Technologies Pvt. Ltd.),
Dr. Nagaraj Sitaram (Principal) and Prof. I Manimozhi (HOD - CSE) were seated on the dais.
A brief introduction about the Trainers was given. Dr. Nagaraj Sitaram (Principal) addressed
the students about the importance of Internet of Things and its applications, and advised them
to actively participate and gain hands-on training at the two-day Workshop.
The Trainer Mr. Balaji started the Workshop at 9.30 am. On the first day of the
Workshop, i.e. 18th February 2019, Mr. Balaji gave an introduction to Internet of Things and
its basic concepts. The architecture of TIVA microcontroller TM4C123GH6PM was explained
in detail. The basic applications such as LED blinking, PWM, ADC and UART were
implemented by the students. The Trainers Mr. Balaji and Mr. Javad actively helped the
students to implement the IOT applications. Mr. Balaji also explained IP address printing and
the working of TCP and UDP protocol.
On the second day of the Workshop, i.e. 19th February 2019, Mr. Balaji explained the
working of HTTP protocol. The students also learnt the implementation of Blynk cloud. They
gained knowledge about the various protocols such as IFTTT, MQTT and RSLK protocols.
Workshop organized by Department of
Computer Science and Engineering
Workshop on
‘Internet of Things, and its Applications using TIVA’
By the time the Workshop ended, the students gained hands-on training on IOT applications
using TIVA microcontroller. The Workshop concluded at 4.00 pm on 19th February 2019.
Outcome of the Event:
The students learnt the architecture of TIVA microcontroller. They implemented applications
such as LED blinking, PWM, ADC and UART. They also learnt the implementation of Blynk
cloud, IP address printing and the working of protocols like TCP, UDP, FTTT, MQTT and
RSLK protocols. By the end of the two-day workshop, the students gained hands-on training
and knowledge in IoT. The two-day Workshop was conducted to attain the POs - Engineering
Knowledge, Problem Analysis, Design/Development of Solutions, Modern Tool Usage and
Lifelong Learning.