Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical...

8
HUBBELL WORKPLACE SOLUTIONS ® Workplace Solutions - Material Handling & Electrical Products -

Transcript of Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical...

Page 1: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

Hubbell Workplace SolutionS®

Workplace Solutions

- Material Handling & Electrical Products -

Page 2: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

Our S-Beam Trolleys are designed with your applications in mind. Economical, durable and expandable, our festoon cable trolley runs on various size S-beams (S3 x 5.7, S4 x 7.7, S6 x 12.5 - consult factory for other beam sizes). These trolleys roll on 4 steel ball bearing wheels that have a static load capacity of 1000 lbs. each. This provides a rolling capacity of 154 lbs at 262 ft per minute. Multiple cable saddle configurations provide a variety of cable carrying options for single or dual flat cable or round cable.

FeStoon trolleySAdjustable S-Beam trolleys

F-It-S3/5.7 Intermediate or Tow Trolley with flat cable saddle F-It-S3/5.7D Intermediate or Tow

Trolley with dual flat cable saddles

F-ItB-S3/5.7 Control Box Trolley for the push button pendant connection

F-It-S3/5.7r2 - 0.60”-0.94” diaF-It-S3/5.7r3 - 0.94”-1.25” dia Intermediate or Tow Trolley with

steel saddle for round cable/hose

F-ICe/r2 - 0.60”-0.94” dia roundF-ICe/r3 - 0.94”-1.25” dia roundF-ICe - single saddle 3” dia FlatF-ICe-D - dual saddle 3” dia FlatEnd Clamps with choice of trolley

Mfr’s Model # Description Fastenal

SKU#

F-IES End Stop for S-Beam 0542328

F-ICE End Clamp for Flat Cable - Single Saddle for S-Beam 0542329

F-ICE-D End Clamp for Flat Cable - Dual Saddle For S-Beam 0542330

F-ICE/R2 End Clamp for Round Cable - 0.60" - 0.94" dia.For S-Beam 0542331

F-ICE/R3 End Clamp for Round Cable - 0.94" - 1.25" dia.For S-Beam 0542332

F-CTA-F12 Tow Arm 12" For S-Beam Trolleys 0542333

F-CTA-F15 Tow Arm 15" For S-Beam Trolleys 0542334

F-CTA-F18 Tow Arm 18" For S-Beam Trolleys 0542335

F-IT-S3/5.7R2 Intermediate or Tow Trolley for round cable 0.60” - 0.94” dia. 0542323

F-IT-S3/5.7R3 Intermediate or Tow Trolley for round cable 0.94” - 1.25” dia. 0542324

F-IT-3/5.7D Intermediate or Tow Trolley for Flat cable Dual Saddle 0542325

F-IT-S3/5.7 Intermediate or Tow Trolley for Flat cable 0542326

F-ITB-S3/5.7 Control Box Trolley For Pushbutton Pendant Connection for S-Beam 0542327

Page 3: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

UNIVERSAL 8-BAR Conductor Bar Systems are designed to carry up to the specified current without overheating. Internal joint connections assure full current carrying capacity without interfering with the free travel of the sliding collector contact shoes.

ConDUCtor BAr SySteMSInsulated Conductor Bar Kits - 8 Bar

TYPICAL APPLICATIONS:

Overhead Cranes•

Monorails•

Traveling Robots•

Overhead Sliding Doors•

AS/RS Systems•

Description Qty Mfr’sModel no.

Fastenal SKU #

Conductor Bar Kit - 3 Phase, 50 feet 1 Kit* CB5038110-1 0542320

Conductor Bar Kit - 3 Phase, 100 feet 1 Kit* CB10038110-1 0542321

Conductor Bar Kit - 3 Phase, 150 feet 1 Kit* CB15038110-1 0542322

*All kits include required number of:Galvanized Steel Conductor 110 Amps x 10'Joint Cover, OrangePower Feed - 110 ampere110A Standard 8-Bar Collector AssemblyMtg Bracket x 15" Web w/ Hanger Snap-inAnchor HangerConnector Tool

T-Track Heavy Duty Festoon Cable Systems are specially designed for applications where a more robust system is required to support heavier loads at wider support spacings. Made of a high strength aluminum extrusion, these systems are rugged enough to handle the most demanding applications.

The track is supplied in convenient lengths which simply bolt together with a heavy duty joint assembly, and it can be curved to a minimum of 48” (1.2M) at various angles if required. The trolleys roll along the outside of the track, which allows for easy inspection and changing of the rollers. These trolleys utilize the same rugged, field proven rollers that are used on the C-Track trolleys, and they are supplied with anti-lift rollers as a standard feature. All standard trolleys feature durable steel wheels.

FeStoon SySteMSt-track Festoon Systems

Mfr’s Model # Description Fastenal

SKU#r-Hc5a t-track Standard trolley assembly for round cable 0.60" - 0.94" dia. 0542349

r-Hc5al t-track Standard trolley assembly for round cable 0.95" - 1.25" dia. 0542350

F-Hct t-track tow trolley assembly for Flat cable 3" dia. 0542354

r-Hcta t-track tow trolley assembly for round cable 0.60 - 0.94" dia. 0542355

r-Hctal t-track tow trolley assembly for round cable 0.95" - 1.25" dia. 0542356

F-HtJ1 t-track Joint kit 0542338

F-HtH t-track Hanger asm angle Support brkt. 0542342

F-HteH/ct t-track Hanger asm. crossarm 0542343

F-HtH/St Strut track Support bracket 0542344

Mfr’s Model # Description Fastenal

SKU#F-HtS t-track end Stop assembly 0542357

F-Ht10 t-track H.D. aluminum 10 ft. 0542336

F-Ht20 t-track H.D. aluminum 20 ft. 0542337

F-Hte end clamp for t-track Flat cable 3" dia. assembly 0542345

r-Hte end clamp for t-track round cable 0.60" - 0.94" dia. assembly 0542346

r-Htel end clamp for t-track round cable 0.95" - 1.25" dia. assembly 0542347

F-Hta t-track tow arm for Flat cable assembly 3" dia. 0542351

r-Hta t-track tow arm for round cable assembly 0.60" - 0.94" dia. 0542352

r-Htal t-track tow arm for round cable assembly 0.95" - 1.25" dia. 0542353

Page 4: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

tool BAlAnCerS

CorD / CABle reelS

Hanging tool ManagementTool Balancers provide a simple means to reduce manufacturing and assembly costs by keeping tools in an easily accessible place at workstations and protecting expensive tools from damage. A Tool Balancer can help reduce worker fatigue and repetitive motion injuries by reducing the apparent weight that a worker must handle in repetitive assembly operations. A properly set-up Tool Balancer will make a heavy tool seem nearly weightless and will enable an operator to pull a tool down from an overhead mount, perform assigned tasks quickly and efficiently and return the tool to it's overhead storage position with little or no effort. Tool Balancers shown on this bulletin can accommodate tools weighing from 0.5 to 187 lbs.

7060406

7060398 - 7060405

7060395 - 7060397

Hubbell Cord reels - Auto-Spring rewindThese reels are ideal for a wide variety of industrial applications and can be mounted on the wall, ceiling or under a work bench. Reels are available with your choice of end effectors: single or dual receptacles, and incandescent or fluorescent handlamps with cord lengths from 25 feet to 70 feet. All reels include an adjustable cord stop, automatic spring rewind, a multi-position cord guide with four rollers and four foot long supply cord with a grounded plug. Reels are supplied with a ratchet locking device which will maintain a desired length of cord. Operator pulls from reel to engage lock, after task is completed a slight pull of the cord will disengage lock allowing cord to be retracted into the reel. Maximum installation height is 16 feet.

Heavy Duty electric Cable reelsSeries 'G' General Purpose Cable reel

UL and CSA listed•

Fully automatic, hand-pull, optional 340° pivot base•

All-welded solid steel construction, slip rings in NEMA 4 • enclosure

Safety Change• ® spring motor, weatherproof gasket on spring motor

Positive ratchet lock with disengage, cable included•

Multi-position cable guide (field adjustable) cable stop • included

Optional 340° Pivot BaseAvailable for Cable, Cord and Hose Reel Models

0708437 - 07084390706967 & 0706971

0706972 - 0706973

7060622 - 7060634 7060613 - 7060617 7060609 - 7060612 7060618 - 7060621

Fastenal SKU #:

Fastenal SKU #s:

Fastenal SKU #s:

Fastenal SKU #s:

Fastenal SKU #s:

Fastenal SKU #s: Fastenal SKU #s: Fastenal SKU #s: Fastenal SKU #s:

Series 'A' Cable reelCast aluminum construction•

Fully automatic, hand-pull, optional 340° pivot base•

Unitized 20 amp slip ring in gasketed enclosure•

Maintenance free enclosed power spring•

Type SOW cable and field adjustable cord stop included • on all reels

Positive locking dog with field adjustable disengage • feature

0726308 - 0726319 0746000 - 0746011 0745988 - 0745999Fastenal SKU #s: Fastenal SKU #s: Fastenal SKU #s:

7060387 - 7060394Fastenal SKU #s:

7060384 - 7060386Fastenal SKU #s:

Page 5: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

JIB KItS

FeStoonS

overhead tool ManagementUsed in conjunction with Tool Balancers, these Jib Booms provide a simple means to maximize production and reduce manufacturing and assembly costs by keeping tools in an easily accessible place at workstations and protecting expensive tools from damage. Jib kits provide up to 360° of workspace without taking up valuable floor space.

Jib Boom Features:Heavy steel construction with durable baked-on powder-coated • polyester finish

Festoon trolleys accept 0.60 - 0.94 inch O.D. air hose or electrical cable•

All assembly hardware is included except for anchors, nuts and washers • necessary for mounting to floor

300 lb Capacity7060407 and 7060408

50 lb Capacity7060410 - 7060413

150 lb Capacity7060409

Wire rope FestoonWire rope festoon systems are designed for limited travel distance and speed applications and are ideal for use on jib cranes. These systems feature easily installed fiberglass reinforced nylon trolleys with zinc plated steel cable or hose saddles. Each kit includes 2 tension brackets, 1 tow arm, 1 tow trolley, 1 end clamp and intermediate trolleys per kit chosen. In addition, kits include sufficient 1/4" wire rope for system length and all hardware required for hanging and tensioning. Provision must be made to support system at each end. Recommended loop depth is 36". Systems do not include electrical cable or connectors.

FlAt eleCtrICAl CoMPonentS roUnD CABle or HoSe CoMPonentS

IntermediateTrolley

IntermediateTrolley

End Clamp

Tow Clamp

End Clamp

Tow Clamp

FLAT CABLE

ROUND CABLE OR HOSE

TENSION BRACKET

END CLAMP

CRANE RAIL

TOW ARM

WIRE ROPE Runs parallel to

crane railTOW CLAMP

Fastens cable to tow arm

Fastenal SKU #s: 7060415 - 7060422

0.60" - 0.94" o.D. round: Fastenal SKU #s: 7060423 - 70604280.95" - 1.25" o.D. round: Fastenal SKU #s: 7060429 - 7060434

7060435 7060441 7060438 7060436 - 7060437

7060442 - 7060443

7060439 - 7060440

360°

360°

180°

Fastenal SKU #s:

Fastenal SKU #s:

Fastenal SKU #:

Fastenal SKU #s:

Automatic • PULL™ RewindingRugged Steel Construction• Compact Enclosed Design• Positive Ratchet Lock• Lock On/Lock Off Switch• Steel Cable Installed• 100 Amp Universal Jaw-Type Grounding Clamp• Safety Orange Polyester Baked-On Finish•

StAtIC DISCHArGe ProDUCtSSeries 'SD' enclosed Spool

0745855 - 0745859Fastenal SKU #s: Ideal for a wide variety of grounding applications

Cable is 7 x 7 stranded stainless steel with yellow polyester elastomer cover, 5/32" o.d.

Spring Rewind with Centrifugal Brake• Open Spool Design• Cable Lengths up to 100 ft• Choice of Grounding Clamps and Plugs• Rugged Steel Construction• Safety Orange Polyester Baked-On Finish•

Series 'oSD' open Spool

0745843 - 0745854Fastenal SKU #s:

Fastenal SKU #: 7060445

Fastenal SKU #: 7060444

Page 6: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

Alligator Clip & C-Clamp

Antistatic Cables prevent sparks from static electricity generated by movement and flow of flammable liquids. Bonding between containers during liquid transfer and connecting drums to an earth ground are required by Federal and local codes. Various clamps and terminals allow a wide variety of uses. All cables are 7 x 19 stranded steel. Insulated cables have Safety Orange jacket.

two 1/4" terminals

Hand Clamp & C-Clamp

two Hand Clamps

Hand Clamp & 1/4" terminal

two Alligator Clips

Hand Clamp & Alligator Clip

Individual Connectors

C-Clamp onlyModel. no. GC-Cee

100 Amp Alligator Clip onlyModel. no. GC-AlG

round Grounding Plug onlyModel. no. AGP-01

Hand Clamp onlyModel. no. GC-Plr

Aircraft Clamp onlyModel. no. AGC-MoD

FAStenAlSKU # Model no. Cable

Description0745860 GCSP-AC-03 3' Flexible Steel0745861 GCSP-AC-05 5' Flexible Steel0745862 GCSP-AC-10 10' Flexible Steel0745863 GCSI-AC-03 3' Insulated Steel0745864 GCSI-AC-05 5' Insulated Steel0745865 GCSI-AC-10 10' Insulated Steel

Available in several lengths, insulated or non-insulated•

Five types of end connectors available on all cables lengths and types•

For longer reach or “Y”, connect several cables with 1/4" terminal ends•

Stranded cable for maximum flexibility and conductivity•

FAStenAlSKU # Model no. Cable

Description0745866 GCSP-HH-03 3' Flexible Steel0745867 GCSP-HH-05 5' Flexible Steel0745868 GCSP-HH-10 10' Flexible Steel0745869 GCSI-HH-03 3' Insulated Steel0745870 GCSI-HH-05 5' Insulated Steel0745871 GCSI-HH-10 10' Insulated Steel

FAStenAlSKU # Model no. Cable

Description0745872 GCSP-HE-03 3' Flexible Steel0745873 GCSP-HE-05 5' Flexible Steel0745874 GCSP-HE-10 10' Flexible Steel0745875 GCSI-HE-03 3' Insulated Steel0745876 GCSI-HE-05 5' Insulated Steel0745877 GCSI-HE-10 10' Insulated Steel

FAStenAlSKU # Model no.

Cable Description

0745878 GCSP-AH-03 3' Flexible Steel0745879 GCSP-AH-05 5' Flexible Steel0745880 GCSP-AH-10 10' Flexible Steel0745881 GCSI-AH-03 3' Insulated Steel0745882 GCSI-AH-05 5' Insulated Steel0745883 GCSI-AH-10 10' Insulated Steel

FAStenAlSKU # Model no.

Cable Description

0745884 GCSP-HC-03 3' Flexible Steel0745885 GCSP-HC-05 5' Flexible Steel0745886 GCSP-HC-10 10' Flexible Steel0745887 GCSI-HC-03 3' Insulated Steel0745888 GCSI-HC-05 5' Insulated Steel0745889 GCSI-HC-10 10' Insulated Steel

FAStenAlSKU # Model no.

Cable Description

0745896 GCSP-EE-03 3' Flexible Steel0745897 GCSP-EE-05 5' Flexible Steel0745898 GCSP-EE-10 10' Flexible Steel0745899 GCSI-EE-03 3' Insulated Steel0745900 GCSI-EE-05 5' Insulated Steel0745901 GCSI-EE-10 10' Insulated Steel

FAStenAlSKU # Model no.

Cable Description

0745890 GCSP-AA-03 3' Flexible Steel0745891 GCSP-AA-05 5' Flexible Steel0745892 GCSP-AA-10 10' Flexible Steel0745893 GCSI-AA-03 3' Insulated Steel0745894 GCSI-AA-05 5' Insulated Steel0745895 GCSI-AA-10 10' Insulated Steel

FAStenAl SKU # 0745902 FAStenAl SKU # 0745903 FAStenAl SKU # 0745904 FAStenAl SKU # 0745905 FAStenAl SKU # 0745906

StAtIC DISCHArGe ProDUCtSGrounding and Bonding Cables

Page 7: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

HUBBell CABle/HoSe CArrIerS guide and protect power and control cables and hoses connected to moving machinery. One end of the carrier is fastened to a stationary base and the other end is fastened to the moving machine. Three types are available: Open with fixed top, open with snap-open top to ease cable/hose installation and enclosed with fixed top to provide protection from chips, dirt, etc.

BASIC KItS (C) include enough trak to form the curve and provide for three ft. of machine travel (standard mounting) or six ft. of machine travel (center mounting). Mounting hardware is included.

extenDerS (D) include one foot of trak only; hardware is not included. Extenders are inserted into the BASIC KIt to provide additional travel and required overall length. Links snap securely together. Individual links can be easily removed with a screwdriver to provide custom length.

SeleCtIon1. WInDoW: See columns A & B below. Select trak that accomodates height and width of cable or hose bundle.

2. trAVel: Measure machine travel. Determine if fixed point of trak is to be at end (standard mount) or in center of machine travel. See drawings at left.

3. orDer trAK: A. BASIC KIt (C)

Provides 3 Ft travel (standard mount), up to 6 Ft for centermount.B. extenDer KItS (D) Provides 1 Ft travel. Order as many as needed for travel.Formula: Trak travel in Ft minus 3 Ft (rounded to next highest number) equals number of extender kits require.

note:Individual links may be removed to obtain

exact length required.

AMaximum o.D.largest Cable/

Hose

BMaximum Widthof Cable/Hose

Bundle

rMinimum

Bend radius

CBASIC KIt3 Ft. travel

(includes brackets)

DextenDer KIt

1 Ft. travel(w/o brackets)

Gleason no. FAStenAl SKU # Gleason no. FAStenAl SKU #

StAnDArD trAKEconomical - Ideal for

shorter travel

0.286 0.531 1.43 P10-1-1.4-3.0 0745907 EP10-1-1.4-1.0 07459380.286 0.900 1.43 P10-2-1.4-3.0 0745908 EP10-2-1.4-1.0 07459390.382 0.900 1.91 P10-2-1.9-3.0 0745909 EP10-2-1.9-1.0 07459400.410 1.350 2.05 P13-1-2.0-3.0 0745910 EP13-1-2.0-1.0 07459410.740 1.350 3.70 P13-1-3.7-3.0 0745911 EP13-1-3.7-1.0 07459420.410 2.052 2.05 P13-2-2.0-3.0 0745912 EP13-2-2.0-1.0 07459430.740 2.052 3.70 P13-2-3.7-3.0 0745913 EP13-2-3.7-1.0 07459440.410 2.772 2.05 P13-3-2.0-3.0 0745914 EP13-3-2.0-1.0 07549450.740 2.772 3.70 P13-3-3.7-3.0 0745915 EP13-3-3.7-1.0 0754946

FlIP-toP trAKTop opens for quick, easy

cable/hose installation

0.382 1.350 1.91 P16-1-1.9-3.0 0745916 EP16-1-1.9-1.0 07459470.688 1.350 3.44 P16-1-3.4-3.0 0745917 EP16-1-3.4-1.0 07459480.382 2.052 1.91 P16-2-1.9-3.0 0745918 EP16-2-1.9-1.0 07459490.688 2.052 3.44 P16-2-3.4-3.0 0745919 EP16-2-3.4-1.0 07459500.382 2.772 1.91 P16-3-1.9-3.0 0745920 EP16-3-1.9-1.0 07459510.688 2.772 3.44 P16-3-3.4-3.0 0745921 EP16-3-3.4-1.0 07459520.382 3.654 1.91 P16-4-1.9-3.0 0745922 EP16-4-1.9-1.0 07459530.688 3.654 3.44 P16-4-3.4-3.0 0745923 EP16-4-3.4-1.0 07459540.680 2.340 3.44 P25-1-3.4-3.0 0745924 EP25-1-3.4-1.0 07459550.680 3.825 3.44 P25-2-3.4-3.0 0745925 EP25-2-3.4-1.0 07459560.956 3.825 4.78 P25-2-4.7-3.0 0745926 EP25-2-4.7-1.0 07459571.546 3.825 7.73 P25-2-7.7-3.0 0745927 EP25-2-7.7-1.0 07459581.575 3.825 11.67 P25-2-11.6-3.0 0745928 EP25-2-11.6-1.0 07459590.956 5.940 4.78 P25-3-4.7-3.0 0745929 EP25-3-4.7-1.0 07459601.546 5.940 7.73 P25-3-7.7-3.0 0745930 EP25-3-7.7-1.0 0745961

enCloSeD trAKProtection from hot chips, sparks and other debris

0.468 1.350 2.34 T0815-2.3-3.0 0745931 ET0815-2.3-1.0 07459620.650 1.800 3.25 T1020-3.2-3.0 0745932 ET1020-3.2-1.0 07459630.900 1.800 5.88 T1020-5.8-3.0 0745933 ET1020-5.8-1.0 07459640.824 2.700 4.12 T15.30-4.1-3.0 0745934 ET15.30-4.1-1.0 07459651.350 2.700 7.73 T1530-7.7-3.0 0745935 ET1530-7.7-1.0 07459661.176 4.050 5.88 T2045-5.8-3.0 0745936 ET2045-5.8-1.0 07459671.676 4.050 8.38 T2045-8.3-3.0 0745937 ET2045-8.3-1.0 0745968

trak travel of BASIC KIt (C) = 3 ft

FIxeD PoInt

trak travel with extenDerS (D) inserted = Qty extenders x 1 Ft + 3 ft

enD MoUntInG ConFIGUrAtIon: Trak travel length = Machine travel length.

B

ADD extenDer KIt(S) to lenGtHen ASSeMBly

WInDoWoPenInG

A

r

FIxeD PoInt

Qty extenders x 1 Ft + 3 ft

note: Each 1 ft. of listed travel becomes 2 ft. when center mounted.

Qty extenders x 1 Ft + 3 ft

Center Mount travel= (Qty extenders x 1 Ft + 3 ft) x 2

Center MoUntInG ConFIGUrAtIon (recommended): Trak travel length = 1/2 machine travel length.

CABle / HoSe CArrIerSStandard, Flip-top and enclosed Carriers

0745907 - 0745915Fastenal SKU #s:

0745916 - 0745930Fastenal SKU #s:

0745931 - 0745937Fastenal SKU #s:

Page 8: Workplace Solutions Hubbell Workplace SolutionSWorkplace Solutions - Material Handling & Electrical Products - Our S-Beam Trolleys are designed with your applications in mind. Economical,

Gleason reel Corp.P.O. Box 26 • 600 South Clark St. Mayville, WI 53050Phone: 920-387-4120 • Fax: 920-387-4189www.hubbell-gleason.com

A HUBBELL COMPANY

®

Mount from ceiling, wall or under bench. Full flow shafts and swivels assure maximum product delivery. Reels feature spring rewind and ratchet lock, multi-position four roller hose guide and adjustable hose stop. Rugged steel construction. Steel components protected by durable baked polyester finish. *Optional pivot base, Fastenal SKU #: 0144164

Series 'PH' Hose reelFor mobile outdoor environment, or mount from ceiling, wall or under bench. Choose 1/4", 3/8", 1/2", 3/4" or 1” hose. Full flow shafts and swivels assure maximum product delivery. Reels feature spring rewind and ratchet lock, multi-position four roller hose guide and adjustable hose stop. Rugged steel construction. Steel components protected by durable baked polyester finish. Hand pull application only.

HoSe reelSHeavy Duty electric Cable reelsSeries 'GH' General Purpose Hose reel

QUAlteCH WorKStAnDSorganize your Work SiteInformation, documentation and inspection stands designed for the workplace. Keep important files clean, organized and accessible. Stands feature yellow, high impact polystyrene display and writing surfaces. Deluxe versions feature locking casters and lockable trays.

0441965 - 0441974Fastenal SKU #s:

0441975 - 0441977Fastenal SKU #s:

Series 'HH' Hose reelFeatures: air, water, oil or grease duty; rugged steel construction; high quality swivel joints designed with seals for each specific fluid application; manual pull off, handcrank rewind; spool locking pin acts as a holding brake to prevent spool from unwinding when not in use; locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull off and heavy duty mounting brackets. Hose must be ordered separately.

0441960 - 0441963Fastenal SKU #s:

0530328Fastenal SKU #:

0530326 - 0530327Fastenal SKU #s:

0530330Fastenal SKU #:

0530329Fastenal SKU #:

0530324 - 0530325Fastenal SKU #s:

rugged steel side chains made of high •strength, low alloy steel

Wide variety of link heights, radii and •widths

Steel or aluminum Cable Carriers•

Ideal for high speed or harsh environments•

Gleason has excellent capabilites to replace •your old worn out tracks, any make, model or size

Applications:machinetools,flamecutters,transfer•cars, laser cutters, cut-off saws, over head cranes and more

GLEASON

Protect Your Cable and Hoses®

FASTENAL 11