Working Safely in an Engineering Environment Element 4 - Recognise and control hazards in the...
-
Upload
lucas-mclain -
Category
Documents
-
view
216 -
download
2
Transcript of Working Safely in an Engineering Environment Element 4 - Recognise and control hazards in the...
Working Safely in an Engineering Environment
Element 4 - Recognise and control hazards in the workplace
Page 2File ref:
O/H No2File ref: Working Safely in an Engineering Environment - Element 4
Hazard Identification & Risk Assessment
O/H No3File ref: Working Safely in an Engineering Environment - Element 4
What is a Hazard?
A hazard is anything with the potential to cause harm
Hazards are: Chemical, Biological, Physical & Ergonomic
A Risk Assessment considers the likeliness and severity of the hazard to do harm ( which leads to the precautions to take to minimise the risk )
O/H No4File ref: Working Safely in an Engineering Environment - Element 4
RISK ASSESSMENT
Both are HAZARDS.
Which is the greater RISK ?
O/H No5File ref: Working Safely in an Engineering Environment - Element 4
Risk Assessment - Petrol
In a tank of a car
Filling up at a petrol pump
Pouring from can into motorcycle tank
Lighting a barbecue
Which is the greatest risk?
O/H No6File ref: Working Safely in an Engineering Environment - Element 4
General Engineering Hazards
Touching moving parts
Entanglement
Crushing
Cuts
Ejection
Slips and Trips
Noise/Vibration/Heat
O/H No7File ref: Working Safely in an Engineering Environment - Element 4
Workplace Precautions
Guarding
Lighting
Stop/Start switches
Operating Instructions
Permit to Work
Risk Assessments
Safety Information
Safety Inspections
O/H No8File ref: Working Safely in an Engineering Environment - Element 4
Risks in Apprentice Workshops
Machinery
Electrical equipment
Chemical
Handling and Transporting
Heights
Failure to report
breakage's
Failure to follow
instruction's
O/H No9File ref: Working Safely in an Engineering Environment - Element 4
Your measures to minimise risks
Isolate the hazard
Stop work activities
Comply with instructions
Ensure safe access and
egress
Use guards
Use fume extraction
Use PPE
Report to Supervisor
Consultation
O/H No10File ref: Working Safely in an Engineering Environment - Element 4
Your Risk Assessment
Seconds Out for Safety
Job Description:
Move the furniture andequipment out of the
room intothe corridor in
preparation for anew floor covering
Seconds-out
for
Safety
Seconds-out
for
Safety
O/H No11File ref: Working Safely in an Engineering Environment - Element 4
Walk Round
Near Miss reporting forms
Risk Assessments
Machinery risks