WORK PROGRAMME NATIONAL STANDARDS DIVISION (NSD) … · 2019. 3. 25. · 1 Work Program July...
Transcript of WORK PROGRAMME NATIONAL STANDARDS DIVISION (NSD) … · 2019. 3. 25. · 1 Work Program July...
-
1
Work Program July –December 2017
WORK PROGRAMME
NATIONAL STANDARDS DIVISION (NSD)
July - December 2017
KK 15 Rd, 49
P.O.BOX 7099, Kigali, Rwanda
Tel: +250 252 586 103/582945
Toll Free: 3250
E-mail: [email protected]
mailto:[email protected]
-
2
Work Program July –December 2017
INTRODUCTION
As it is required by WTO Agreement on Technical Barriers to Trade (Appendix 3 of the Code of Good Practice for the Preparation,
Adoption and Application of Standards) every standardization body has to publish its work program at least once every six months.
The RSB work program contains a list of all the Draft Standards that are in progress and it is published once year and it also gives
information related to:
Technical committee name and number;
Title of the Draft Standard;
The International Classification for Standards (ICS) under which each Draft Standard is classified;
Base standards considered in work to develop the Draft Standard, where relevant;
Stages in the development of a Draft Standard and the expected date of completion.
How to use this publication?
1 Technical committee name and number
The second column in the left hand, indicates the technical committee name and its number under which the draft was developed
2 Title of the Draft Standard
The third column gives the title of each Draft Standard
-
3
Work Program July –December 2017
3 International Classification for standards (ICS)
Column 4 indicates the subject under which the draft falls. The ICS numbers is a classification system developed by the International
Organization for Standardization (ISO), serving primarily as a uniform structure for standards catalogues and work programs
published by standardizing bodies.
4 Reference standards
Column 5 gives reference number of standards used in developing the Draft Standards.
5 Stages and time in standards development
Column 6 indicates the stages involved in standards development process and the time expected to publish the standard.
The stages are as follows:
Stage 1: Approval and planning of standards development project
Stage 2: New work item Draft Proposal
Stage 3&4: Working draft and Technical committee meetings
Stage 5: Committee draft (CD)
Stage 6: Public review of the Draft Rwanda Standard (DRS)
Stage 7: Approval of Rwanda Standards (RS)
Stage 8: Publication of Rwanda Standards
-
4
Work Program July –December 2017
WORK PROGRAM JULY –DECEMBER 2017
Item no TC name and no. Title ICS Rev./
New/
Harm
Referenc
e
standard
s
Timing
July Au
g
Sep
t
Oct Nov Dec
Food and Agriculture
1.
RSB/TC 019 Spices,
Condiments and
food additives
DRS 359-1: 2017, Spirulina
products — Specification — Part
1: Ground spirulina
67.220.20 New 6 6 7&
8
2. PDS XXX: 2017, Peeled and chopped garlic
67.220.10 New 1 2 3&
4
5 6 7
3. PDS XXX: 2017, Garlic sauce 67.220.10 New 1 2 3&4
5 6 7
4. PDS XXX: 2017, Garlic powder 67.220.10 New 1 2 3&4
5 6 7
5. DRS 123: 2017, Chilli Sauce — Specification
67.220.10 Rev 1 2 3&
4
5 6 7
6. DRS 169: 2017, Chili Oils — Specification
67.220.10 Rev 1 2 3&
4
5 6 7
7. RSB/TC 017 Prepackaged and
Prepared foods
Fortification
DRS 362: 2017, Fish flour —
Specification
67.120.30 New 6 6 7&
8
8.
RSB/TC 004 Milk
and milk products
DRS 50-1: 2017, Cheese ― Part 1:
General Requirements
67.100.30 Rev 1 2 3&4 5 6
9. DRS 49: 2017, Yoghurt ― Specification
67.100.99 Rev 1 2 3&4 5 6
10. DRS 193: 2017, Dairy ice and ice cream — Specification
67.100.40 Rev 1 2 3&4 5 6
-
5
Work Program July –December 2017
11. DRS 51: 2017, Butter — Specification
67.100.20 Rev 1 2 3&4 5 6
12. DRS 76: 2017, Code of marketing of breast — Milk substitutes
67.020 Rev 1 2 3&4 5 6
13.
RSB/TC 005 Meat
and meat product
DRS 55-1: 2017, Canned Fish in
Tomato Sauce ― Part1:
Specification
67.120.30 Rev 1&2 3
&4
5 6 6 7
14. DRS 81: 2017, Code of hygienic practice for processed meat
products
67.020 Rev 1&2 3
&4
5 6 6 7
15. RSB/TC 006 Edible
oils
DRS 40: 2017, Margarine ―
Specification
67.200.20 Rev 1 2 3&
4
5 6 7
16. Mayonaise 67.200.10 New 1 2 3&4
5 6 7
17. RSB/TC 003 & RSB/TC 017
Cereals, Pulses,
Legumes and
cereals products &
Prepackaged
DRS 350: 2017, Iron – biofortified
beans — Specification
67.060 New 6 6 7&
8
18. DRS 28: 2017, Edible starches —Test methods
19.020 Rev 6 6 7&
8
19.
RSB/TC 001
Beverages
DRS 358: 2017, Banana Juice —
Specification
67.160.20 New 6 6 7&
8
20. DRS 16-1: 2017, Fruit-based soft drinks-specification ― Part 1: Soft
drinks with Fruit Juice
67.160.20 Rev 6 6 7&
8
21. DRS 16-2: 2017, Fruit-based soft drinks-specification ― Part 2:
Comminuted fruit based soft
drinks
67.160.20 Rev 6 6 7&
8
22. DRS 18: 2017, Concentrated Passion fruit juice preserved
exclusively by physical means—
67.160.20 Rev 6 7&
8
-
6
Work Program July –December 2017
Specification
23. DRS 120-1: 2017, Health drinks― Specification — Part 1: Vitamin
C-based health drinks
67.160.20 Rev 1&2 3&
4
5 6 6 7
24. DRS 202: 2017, Fruit juices and nectars — Specification
67.160.20 Rev 1&2 3&
4
5 6 6 7
25. DRS 15: 2017, Glucose based energy drink ― Specification
67.160.20 Rev 1&2 3&
4
5 6 6 7
26. DRS 79: 2017, Fruit Flavoured Drinks ― Specification
67.160.20 Rev 1&2 3&
4
5 6 6 7
27. DRS 83: 2017, Soft drinks ― Specification
67.160.20 Rev 1&2 3&
4
5 6 6 7
28. DRS 3: 2017, Processing, Handling and Distribution of
Alcoholic Beverages — Code of
Practice
67.020 Rev 6 7&
8
29. RSB/TC 012 Sugars and Sugar products
PDS XXX : 2017, Edible ices
(Lollies)— Specification
67.180.10 New 1 2 3&
4
5 6 6
Environment
30.
RSB/TC 013
Environmental,
Health & Safety
DRS 363: 2017, Tannery effluent
— Safety disposal
13.060.30 New 6 6 7 8
31. PDS XXX:2016, Garages — Waste disposal
13.030.01 New 1 2 3&4 5 6
32. PDS XXX: 2016,Health and safety for non-food industrial workers —
Facility requirements
67.020 New 6 6 7 8
33. PDS 145-2: 2017, Requirements for roadworthiness testing – Part 2:
Emission limits for motor vehicles
13.040.50 New 1 2 3&
4
5 6 6
-
7
Work Program July –December 2017
34. PDS XXX: 2017, Construction solid wastes management
13.030.10 New 1 2 3&4 5 6
35.
RSB/TC 013 and
TC 024
DRS 353-1: 2017, Water quality
— Chemicals used for treatment of
water intended for human
consumption — Part 1:
Aluminium sulphate
71.100.80 New 6 6 7&
8
36. PDS XXX: 2017, Chemicals used for treatment of water intended for
human consumption — Sodium
chlorate
71.100.80 New 1 2 3&
4
5 6 6
37. DRS 353-2: 2017, Water quality — Chemicals used for treatment of
water intended for human
consumption — Part 2 Calcium
hypochlorite
71.100.80 New 6 6 7&
8
38. DRS 127-1 2017, Bleaching agents — Part 1:Sodium
hypochlorite solutions for water
treatment
71.100.80 Rev 1 2 3&
4
5 6 6
Chemistry
39.
RSB/TC 024
Chemicals and
consumer products
DRS 351: 2017, Lubricating oils
for turbines – Specification (New)
75.100 New 6 6 7&
8
40. DRS 352: 2017, Kerosene – specification
75.160.20 New 6 6 7&
8
41. PDS XXX: 2017, Pytrhin and permethrin based insecticides
65.100.10 New 1&2 3&
4
5 6 6 7
42. PDS XXX: 2017, Fuel additives 75.160.20 New 1&2
3&
4
5 6 6 7
43. RSB/TC 011 Cosmetics, toiletries
DRS 333: 2017, Herbal cosmetic
products – General requirements
71.100.70 New 6 6 7&
8
-
8
Work Program July –December 2017
44. and surface active agents
DRS 360: 2017, Herbal soap –
specification
71.100.70 New 6 6 7&
8
45. DRS 361: 2017, Herbal petroleum jelly – specification
71.100.70 New 6 6 7&
8
46. DRS 283-1: 2017, Glass cleaner – Specification – Part 1: Liquid-
based glass cleaner
81.040 New 6 6 7&
8
47. DRS 127-2: 2017, Bleaching agents – Specification – Part 2:
Sodium hypochlorite solutions for
industrial and domestic use
71.060 New 6 6 7&
8
48. DRS 86: 2017 Castor oils for cosmetic industry
71.100.70 Rev 1&
2
3&
4
5 6 6
49. DRS 92: 2017, Minerals oils for cosmetic industry
71.100.70 Rev 3&
4
5 6 6
50. RSB/TC 015 Pharmaceutical
products
PDS XXX: 2017, Essential oil
based mosquito repellents
65.100 New 1&2 3&
4
5
Service
51.
RBS/TC 14
Quality
Management and
Quality
Assurance
DRS ISO 18295-1, Customer
contact centres – Part 1:
Requirements for customer contact
centres
03.080.30 New 1 2 3&
4
5&6 7 8
52. DRS ISO 20400: 2017, Sustainable procurement —
Guidance
03.100.10 New 6 6 6 7 7 8
53. DRS ISO 10007: 2017 Quality
management — Guidelines for
configuration management
03.120.10 Rev 1 2 3&
4
5&6 7 8
54. DRS ISO/TS 9002: 2016, Quality
management systems —
03.120.10 New 1 2 3&
4
5&6 7 8
https://www.iso.org/en/ics/03.080.30.htmlhttps://www.iso.org/contents/data/standard/07/04/70400.html?browse=tc
-
9
Work Program July –December 2017
Guidelines for the application of
ISO 9001: 2015
55. RSB/TC 033 Tourism and
Hospitality
DRS ISO 13009: 2015, Tourism
and related services —
Requirements and
recommendations for beach
operation
03.200.01 New 6 6 6 7 7 8
56. DRS 219-1: 2017, Accommodation and restaurants
establishments. Part 1: General
requirements
03.080.30 Rev 6 6 6 7 7 8
57. DRS 219-2: 2017, Accommodation and restaurants
establishments. Part 2: Grading
Criteria
03.080.30 New 6 6 6 7 7 8
58. DRS ISO 17679: 2016, Tourism and related services — Wellness
spa — Service requirements
03.200.01 New 6 6 6 7 7 8
59. DRS ISO/TR 20183: 2015, Sports and other recreational facilities
and equipment — Injury and
safety definitions and thresholds
— Guidelines for their inclusion in
standards
03.200.99 New 6 6 6 7 7 8
60. DRS 355: 2017, Cosmetology and wellness for beauty salons —
Requirements
71.100.70 New 6 6 6 7 7 8
ENGINEERING AND URBAN PLANNING UNIT
Item no TC name and
number
Title ICS Rev/N
ew/Ha
rm
Referenc
e
standard
s
Timing
July Au
g
Sep
t
Oct Nov Dec
https://www.google.rw/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjZhIa48svSAhUpKMAKHfNcAugQFggaMAA&url=https%3A%2F%2Fwww.iso.org%2Fstandard%2F52329.html&usg=AFQjCNGUmb4Zmr_Fucbu9tSg0gkkM520BA&sig2=xbKCFbJ-5hEmf1dyfbt9DAhttps://www.google.rw/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiXpOvN8svSAhVpCsAKHaGZA_oQFggaMAA&url=https%3A%2F%2Fwww.iso.org%2Fstandard%2F60243.html&usg=AFQjCNH39LFYIu5ozyAP-PJxTjuJwyAIyg&sig2=xWMZf7gatuycozg-e9qYdA
-
10
Work Program July –December 2017
61. TC 23 Mechanical Engineering and
Metallurgy
DRS ISO 4190-1: 2010, Lift
(Elevator) installation — Part 1:
Class I, II, III and VI lifts
91.140.90 New ISO
4190-
1:2010
6 6 7 8
62. DRS ISO 4190-2: 2001, Lift (US: Elevator) installation — Part 2:
Class IV lifts
91.140.90 New ISO
4190-
2:2001
6 6 7 8
63. DRS ISO 4190-3: 1982, Passenger lift installations - Part 3: Service
lifts class V
91.140.90 New ISO
4190-
3:1982
6 6 7 8
64. DRS ISO 4190-5: 2006, Lift (Elevator) installation — Part 5:
Control devices, signals and
additional Fittings
91.140.90 New ISO
4190-
5:2006
6 6 7 8
65. DRS ISO 4190-6: 1984, Lifts and service lifts (USA: elevators and
dumbwaiters) - Part 6: Passenger
lifts to be installed in residential
buildings - Planning and selection
91.140.90 New ISO
4190-
6:1984
6 6 7 8
66. DRS 349: 2017, Domestic biogas
digester Specification
27 100 New 6 6 7 8
67. PDS XXX: 2017, Safety rules for the construction and installation of
lifts Specification
- New BS EN
81-1
BS 5655
6 6 7 8
68. DRS 364: 2017, Steel nails Specification
21.060.50;
49.030.40
New BS 1202-
1: 2002
6 6 7 8
69. DRS ISO 6362-3: 2012, Wrought aluminium and aluminium alloys
— Extruded rods/bars, tubes and
profiles Part 3: Extruded
rectangular bars - Tolerances on
shape and dimensions
77.150.10 New ISO
6362-
3:2012
2 3&
4
5 6 6 7
70. DRS ISO 6362-4: 2012, Wrought 77.150.10 New ISO 2 3& 5 6 6 7
-
11
Work Program July –December 2017
aluminium and aluminium alloys
— Extruded rods/bars, tubes and
profiles Part 4: Profiles —
Tolerances on shape and
dimensions
6362-
4:2012
4
71. DRS ISO 6362-5: 2012, Wrought aluminium and aluminium alloys
— Extruded rods/bars, tubes and
profiles Part 5: Round, square
and hexagonal bars — Tolerances
on shape and dimensions
77.150.10 New ISO
6362-
5:2012
2 3&
4
5 6 6 7
72. DRS ISO 6362-6: 2012, Wrought aluminium and aluminium alloys
— Extruded rods/bars, tubes and
profiles Part 6: Round, square,
rectangular and hexagonal tubes
— Tolerances on shape and
dimensions
77.150.10 New ISO
6362-
6:2012
2 3&
4
5 6 6 7
73. DRS ISO 6362-7: 2012, Wrought aluminium and aluminium alloys
— Extruded rods/bars, tubes and
profiles Part 7: Chemical
composition
77.150.10 New ISO
6362-
7:2012
2 3&
4
5 6 6 7
74. DRS ISO 13976: 2016, Hot-rolled steel sheet in coils of structural
quality and heavy thickness
77.140.50 New ISO
13976:20
16
2 3&
4
5 6 6 7
75. DRS ISO 1610: 2012, Hot-rolled steel sheet products —
Dimensional and shape tolerances
77.140.50 New ISO
1610:201
2
2 3&
4
5 6 6 7
-
12
Work Program July –December 2017
76. PDS 145-2: 2017, Testing of Motor vehicle for roadworthiness
Part 3: Garage requirements
ICS
43.020
New 2 2 3&
4
5 6 6
77. RS OIML R 34: 1979, Accuracy
classes of measuring instruments
New OIML R
34: 1979
1 2 3&
4
5 6 6
78. RS OIML R 58: 1998, Sound level meters
New OIML R
58:1998
1 2 3&
4
5 6 6
79. RS OIML R 140: 2007, Measuring systems for gaseous fuel
New OIML R
140:2007
1 2 3&
4
5 6 6
80. RS OIML R 66: 1985, Length measuring instruments
New OIML R
66:1985
1 2 3&
4
5 6 6
81. RS OIML R 71: 2008, Fixed storage tanks. General
requirements
New OIML R
71:2008
1 2 3&
4
5 6 6
82. DRS 186-1: 2017, Code of Practice for Fire Safety of
Building ― Part 1: General
Principles of Fire Grading and
Classification
13.220.40 Rev RS 186-
1: 2013
2 2 3&
4
5 6 6
83. DRS 186-2: 2017, Code of Practice for Fire Safety of
Building ― Part 2: Details of
Construction
13.220.40 Rev RS 186-
2: 2013
2 2 3&
4
5 6 6
84. RS 186-3: 2017, Code of Practice for Fire Safety of Building ― Part
3: Part 3: Fire Safety in Hotels
13.220.40 Rev RS 186-
3: 2013
2 2 3&
4
5 6 6
85. DRS 186-4: 2017, Code of Practice for Fire Safety of
Building ― Part 4: Selection,
installation and maintenance of
automatic fire detection and alarm
13.220.40 Rev RS 186-
4: 2013
2 2 3&
4
5 6 6
-
13
Work Program July –December 2017
system
86. DRS 186-5: 2017, Code of Practice for Fire Safety of
Building ― Part 5: Exit
requirements and personal hazard
13.220.40 Rev RS 186-
5: 2013
2 2 3&
4
5 6 6
HARMONIZATION
87. EASC/TC 040 Petroleum and
petroleum products
industry and
handling equipments
CD/K/4: 2016, Road tankers for
petroleum based flammable
liquids— Specification
New
88. CD/K/1: 2016, The petroleum industry — Storage and
distribution of petroleum products
in aboveground bulk installation
New
89. CD/K/2: 2016, The petroleum industry — The installation of
underground storage tanks,
pumps/dispensers and pipe work
at service stations and consumer
installations — Code of practice
New
90. CD/K/5: 2016, Petroleum facilities- Retail and consumer
outlets — Specification
New
91. CD/K/3: 2016, The storage and handling of liquid fuel- large
consumer installations — Code of
practice
New
92. EASC/TC 035 Steel and Steel Products
NWIP/TZ/1: 2016, Structural
steels — Part 1: General technical
delivery conditions for hot-rolled
products
New
-
14
Work Program July –December 2017
93. NWIP/TZ/2:2016 , Structural steels — Part 2: Technical
delivery conditions for structural
steels for general purposes
New
94. NWIP/TZ/3:2016 , Structural steels — Part 3: Technical
delivery conditions for fine-grain
structural steels
New
95. NWIP/TZ/4:2016 (Rev EAS 412-1:2013), Steel for the
reinforcement of concrete — Part
1: Plain bars
EAS 412-
1: 2013
96. NWIP/TZ/4:2016 (Rev EAS 412-2:2013) , Steel for the
reinforcement of concrete-Part 2:
Ribbed bars
Rev EAS 412-
2: 2013
97. NWIP/TZ/4:2016, (Rev EAS 412-3:2013) , Steel for the
reinforcement of concrete — Part
3: Welded Fabric
EAS 412-
3: 2013
98. NWIP/TZ/5: 2016, (REV EAS 198:2001), General requirements
for the supply of metallurgical
materials
Rev
99. NWIP/TZ/6:2016, Steel — Round plain head nails — Specification
New
100. NWIP/TZ/7:2016, Cold rolled steel section — Specifications
101. EASC/TC 038 Liquefied Petroleum
DEAS 901: 2017, Inspection and
testing of LPG road tankers
New DEAS
901: 2016
-
15
Work Program July –December 2017
102. and natural Gas equipments and
accessories
DEAS 900-1: 2017, The handling,
storage, and distribution of
liquefied petroleum gas in
domestic, commercial, and
industrial installations — Code of
practice Part 1: Storage and filling
sites for refillable liquefied
petroleum gas (LPG) containers
of capacity not exceeding 150
litres
New DEAS
900-1:
2016
103. DEAS 903: 2017, Welded steel tanks for liquefied petroleum gas
(LPG) — Road tankers — Design
and manufacture
New DEAS
903: 2016
104. DEAS 900-2: 2017, The handling, storage, and distribution of
liquefied petroleum gas in
domestic, commercial, and
industrial installations — Code of
practice Part 2: Liquefied
petroleum gas installations
involving gas storage vessels of
individual water capacity
exceeding 150 L and combined
water capacity not exceeding 9000
L per installation
New DEAS
900-2:
2016
105. DEAS 902: 2017, Bulk LPG road tankers — Assembling —
Requirements
New DEAS
902: 2016
106. TC 029 Textiles and Leather Engineering
ISO 105-A02:1993, Textiles —
Tests for colour fastness — Part
A02: Grey scale for assessing
change in colour
New ISO 105-
A02:1993
5 6 7 7 8
107.
-
16
Work Program July –December 2017
108. PDS XXX: 2017, Nylon socks — specification
New 5 6 7 7 8
109. PDS XXX: 2017, Code of practice for silk cocoon
production
New 5 6 7 7 8
110. PDS XXX: 2017, Gents cotton briefs —specification
New 5 6 7 7 8
111. PDS XXX: 2017, Ladies` cotton panties — specification
New 5 6 7 7 8
112. PDS XXX: 2017, Kitchen towels — Specification
New 1 2 3&
4
5 5 6
113. PDS XXX: 2017, Medical towels — Specification
New 1 2 3&
4
5 5 6
114. PDS XXX: 2017, Flexible
polyurethane foam for mattresses
— Specification — Part 2:
Mattresses
New 1 2 3&
4
5 5 6
115. PDS XXX: 2017, Flexible
polyurethane foam for mattresses
— Specification — Part
3:Reconstituted flexible
polyurethane foam
New 1 2 2 3&4 5 5
116. PDS XXX: 2017, Flexible polyurethane foam for mattresses
— Specification — Part 1:
General requirements
New 1 2 2 3&4 5 5
Civil Engineering and urban planning standards
117. TC 029 Civil
PDS XXX: 2017, Aggregates for
concrete — specifications
91.1
00.01
New 3&4 5 6 6 7 8
-
17
Work Program July –December 2017
118. Engineering and urban planning
PDS XXX: 2017, School
Furniture — Classroom furniture
— Specifications
97.14
0
3&4 3&
4
3&
4
5 6 7
119. DRS ASTM C131/C131M-14 2017, Standard Test Method for
resistance to degradation of small
size aggregates by abrasion and
impact value in los Angeles
Machine
19.06
0
New ASTM
C131/C131
M-14 2017
3&4 3&
4
6 6 7 8
120. DRS ASTM C535-16: 2017, Standard Test Method for
resistance to degradation of Large
Size aggregates by abrasion and
impact value in los Angeles
Machine
19.0
60
New ASTM
C535-16:
2017
3&4 5 6 6 7 8
121.
DRS 107: 2010, Building Sands
91.10
0.15
Rev RS 107:
2010
1&2 3&
4
5 6 7 8
122. DRS 267-1: 2015, Feeder roads
Guidelines for Design
93.08
0.10
Rev RS 267-1:
2015
1&2 3&
4
5 6 7 8
123. DRS 267-2: 2015, Feeder roads
Guidelines for Maintenance
93.08
0.10
Rev RS 267-2:
2015
1&2 3&
4
5 6 7 8
124. PDS XXX: 2017, School
Furniture — bunk beds —
Specifications
97.14
0
New 1 2 3&
4
5 6 6
125. PDS XXX: 2017, School furniture
— Storage units
97.14
0
New 1 2 3&
4
5 6 6
126. PDS XXX: 2017, Fire performance of external cladding
New 1 2 3&4 5 6
-
18
Work Program July –December 2017
systems
ARSO Harmonization
127. ARSO/THC – 003 on
Building and civil
engineering
XXX: 2017, Guideline for energy
efficiency in buildings
91.12
0.10
Harm 1&
2
3&4
XXX: 2017, Guideline for
compressed earth blocks
91.10
0.15
Harm 1&
2
3&4
Raymond MURENZI
Director General
By Delegation
Athanasie MUKESHIYAREMYE
Ag. Manager — National Standards Division