WOODSY

©2015 Riley Blake Designs

FINISHED QUILT SIZE 60” x 60”Measurements include ¼” seam allowance.Sew with right sides together unless otherwise stated.

Please check our website www.rileyblakedesigns.com for any revisions before starting this project. This pattern requires a basic knowledge of quilting technique and terminology. The quilt and block diagrams portrayed are virtual images. The layout and look of your project may differ when using actual fabric.

FABRIC REQUIREMENTS1 Happy Camper 10-Inch Stacker (10-4730-21)11/8 yards (1.05 m) brown main (C4730 Brown)½ yard (50 cm) multi stripe (C4732 Multi)1 multi panel (P4737 Multi)1 yard (95 cm) clean white solid (C100-01 Clean White)Binding 5/8 yard (60 cm)Backing 3¾ yards (3.45 m)

CUTTING REQUIREMENTSPlease read instructions first before cutting. Seam allowances vary so measure through the center of the quilt before cutting border pieces.

10-Inch StackerCut 1 rectangle 2½” x 7½” from the following assorted prints:

blue main, brown main, green main, blue trees, brown trees, yellow trees, blue smores, brown smores, tan smores, green camper, tan camper, blue tracks, brown chow

Cut 2 rectangles 2½” x 7½” from the following assorted prints:blue camper, brown tracks, yellow tracks, blue chow

Cut 3 rectangles 2½” x 7½” from orange chow.

Brown MainCut 6 strips 5½” x WOF for Border 5.

Multi StripeCut 4 strips 3½” x WOF for Border 1.

Multi PanelCut 1 square 32½” x 32½” for the quilt center.

Clean White SolidCut 1 strip 2½” x WOF. Cut the strip into 4 squares 2½” x 2½”

for Border 3.Cut 9 strips 2½” x WOF for Borders 2 and 4.

QUILT ASSEMBLYRefer to the quilt photo for placement of fabrics.

BordersSeam allowances vary so measure through the center of the quilt before cutting border pieces. Sew border strips together end to end if necessary to get the length needed. Sew side borders first.

Border 1Side borders should be 32½”. Top and bottom borders should be 38½”.

Border 2Side borders should be 38½”. Top and bottom borders should be 42½”.

Border 3Refer to the quilt photo for placement of print 2½” x 7½” rectangles. Sew 6 print 2½” x 7½” rectangles together for the right side border. Sew 6 print 2½” x 7½” rectangles together for the left side border. Sew the right and left side borders to the quilt center.

Refer to the quilt photo for placement of print 2½” x 7½” rectangles. Sew 6 print 2½” x 7½” rectangles together for the top border. Sew 6 print 2½” x 7½” rectangles together for the bottom border. Sew a clean white solid 2½” square to each end of the top and bottom borders. Sew the top and bottom borders to the quilt center.

Border 4Side borders should be 46½”. Top and bottom borders should be 50½”.

Border 5Side borders should be 50½”. Top and bottom borders should be 60½”.

Finish quilt by layering the quilt top, batting, and back. Bind with your favorite Riley Blake fabric from the Happy Camper Collection. Have fun with your colors and enjoy the journey of making your quilt

WOODSY