Wood tech sponsorship & exhibition opportuunities
-
Upload
digital-villages -
Category
Technology
-
view
285 -
download
0
Transcript of Wood tech sponsorship & exhibition opportuunities
S e p t e m b e r 2 0 1 5Melbourne, Australia
S e p t e m b e r 2 0 1 5Rotorua, New Zealand
The Forest Industry Engineering Association (FIEA) is well known for
its regular world class programmes that showcase the very latest
developments in sawing and scanning technologies. For well over 15 years
SawTECH, ScanTECH and Wood Manufacturing events have been run for
Australasian wood processing companies.
In September 2013 an inaugural WoodEXPO ran in both New Zealand
and Australia, the last major event run in the region. It highlighted new
innovations, new products and new equipment to improve local sawmilling,
wood manufacturing and wood panel companies operating efficiencies –
and profitability.
To remain internationally competitive, local sawmills increasingly are
looking at tools and technologies that can be used to increase lumber
yields, improve grade recoveries, get higher production speeds out of their
saw-lines, lower the service or maintenance requirements of equipment
and reduce the sawing costs for their operation. Sawmillers increasingly
are working much more closely with their technology providers. The
last couple of years has seen some of the most sophisticated sawing
technologies and saw designs developed in recent times.
To showcase these developments, WoodTECH 2015 has been set up for
local sawmilling companies. This year the event has also had a major
overhaul. A large cross section of sawmillers in both countries will be
having input to the redesign. In addition to sawmill optimisation and saw
selection and operation, previous technology events on Mill Maintenance,
Log & Lumber Scanning and Lumber Quality Control have all been built into
this year’s event.
There’s also a much greater emphasis on the practical issues of selecting
and running saws, low cost improvement tools and on smaller to medium
sized operations which are such an integral part of the Australasian
sawmilling industry. The common theme when speaking to industry is to
focus on how to get the best out of the resource and operation as well as
investment in new plant. A better understanding on how saws within the
mill are been selected, maintained and operated and how to get the most
out of each saw centre is also high on the list of priorities.
As well as technology within the mill – the environment in which the
production team is working and interacting is a critical part of working
smarter – from reconfiguring production lines in the mill through to finding
faster ways to identify and reject unacceptable products. The returns
through the power of the “team” are indeed significant.
WoodTECH 2015 is long overdue. This latest technology series will provide
an essential and independent update on an array of exciting new wood
scanning, sawing and mill optimisation technologies as well as some
innovative human resource practices best suited to local processing
operations. As with previous events, it’s being designed for both senior
management as well as production and operational staff from local mills.
Background:
Excellent opportunity to hear about technology advancements & networking with other sawmillers & suppliers. (ScanTECH 2010)
Wednesday 16 – Thursday 17, Sept 2015Bayview Eden Melbourne,Melbourne, Australia
Tuesday 22 – Wednesday 23, Sept 2015Distinction Rotorua Hotel,Rotorua, New Zealand
MILL SCANNING - SAWING - OPTIMISATION
2
Who will be attending WoodTECH 2015?
•Sawmillsitemanagers •Sawmillproductionandengineeringmanagers •Millsupervisors,maintenanceandproductionstaff •Saw-doctors •Equipment,productandservicesupplierstoAustralasia’ssawmillingindustry
Programme Planning:
We are currently working closely with a wide range of New Zealand, Australian and internationalcompanies,servicesuppliers,researchersandgovernmentbodiestodevelopapracticaltwodayprogrammeforAustralasia.Furtherdetailsontheprogrammecontentwillbeavailableshortly.Ifwantingtocontributetotheprogrammedesign,pleasegetbacktousasap.
Event Promotions:
WoodTECH2015willbeheavilypromotedthroughthemedia,directmailing,trademagazines,industryassociationsandrelatede-newsletters,internetblogsandsocialmedia,andtheforestryindustry’sleadingweeklye-newsletters,FridayOffcuts(www.fridayoffcuts.com) and WoodWeek (www.woodweek.com).
SpecialcomplimentaryweeklybanneradvertisementsinFridayOffcuts(ORWoodWeek) havebeenincludedforWoodTECH2015sponsorsandexhibitorsleadinguptotheevent.Sponsors and exhibitors should also look closely at taking up options of additional promotionthroughtheweeklye-newslettersinandaroundtheevent.
Well run and informative. Well organised. Well done. Excellent conference with very informative presentations. (ScanTECH 2010)
Who is the Forest Industry Engineering Association (FIEA)?
Since1998theForestIndustryEngineeringAssociation(FIEA),adivisionofInnovatekLtd,hasrunanextensiveseriesoftechnology related events for Australasian forest products companies.Over300conferences,tradeshowsandexhibitionshavebeenrunforlocalcompaniesinbothcountries.FIEA’skeyobjectivethroughtheseeventsistoimprovetheperformanceandproductivecapabilityofforestryandwoodproductscompaniesintheregion.FIEAisrecognizedasoneofthemosteffectiveinformationprovidersfortheAustralasianforestry&woodproductsindustries.FormoreinformationonFIEAortheservicesbeingsupplied,seewww.fiea.org.nz
Programme Details:
MILL SCANNING - SAWING - OPTIMISATION 3
Five Star Sponsor $5,000 + GST* NZ$3,000 + GST AU$3,000 + GSTFour Star Sponsor $4,000 + GST* NZ$2,500 + GST AU$2,500 + GSTThree Star Sponsor $3,000 + GST* NZ$2,000 + GST AU$2,000 + GST
*Foraccountingandtaxpurposes,eachvenuewillbeinvoiced intheappropriatecurrency.Forsponsorshipforbothvenues, 50%ofthetotalamountwillbeinvoicedinNZcurrencyand 50%inAustraliancurrency.
Participation in the “Technology Showcase” session **
Display/Exhibition space at the venue
Logo to appear on promotional flyers
Complimentary event registration for company employee / nominated client to the full event
25% discount off standard conference rate for any additional company registrations
A list of registered delegates provided to your company prior to the event
Advert included in conference handbook
Acknowledgement and company logo included in the conference handbook
Logo to appear on the event website (with a link to your website)
Logo to appear in email marketing (with a link to your website)
Complimentary weeks of single side banner advertising in Friday Offcuts (or WoodWeek). Special discounted rates also off any additional advertising***
Discounted advertising rates (30%) in Australasian Timberman in the lead up to the event.
Sponsorship Opportunities
Five Star Sponsor
Four Star Sponsor
Three Star Sponsor
3
Half Page
4
Half Page
2
3 2
Sponsorship Package Both Events (New Zealand & Australia) New Zealand Only Australia Only
Sponsorship Benefits
Well-run, informative – some great practical tips. Got a lot of value from it. A good blend of leading edge technology plus basic saw-doctoring & sawing principles. (SawTECH 2011
MILL SCANNING - SAWING - OPTIMISATION
Quarter Page
4
Sponsorship Details:
** Technology Showcase (Popularprogrammesession):FiveStarSponsors are entitled to be involved in this “showcase” which will be includedaspartoftheconferenceprogramme.
Intheshowcase,eachparticipatingsponsorisabletodoashort5-10minuterapidfirepresentationtothefullaudience.ThissessionprovidesFiveStarsponsorswithauniqueopportunitytoraisetheirprofileandpresentspecificcompanyorproductinformationtoalltheeventdelegates.
Note:FiveStarSponsorswillbelimitedtoFIVE ONLYateachvenue.
*** E-newsletter Banner Advertising: All event sponsors will receive complimentarysinglesidebanneradvertisingspacesinFriday Offcuts (ORWoodWeek).Thiswillbeutilizedinthetwomonthsleadinguptotheeventtoensuremaximumcoverageforoursponsors.FIEAwillplacetheadvertisement(logopluslinkthroughtothecompany’swebsiteoralternatively,anadvertisementifsuppliedbythesponsor–specificationsavailableonrequest).
Asanadditionalbenefit,tomaximizecoverageandpromotionsleadinguptoorimmediatelyaftertheevent,sponsorscanelecttotakeoutafurtheronemonth’sbanneradvertisinginFriday Offcuts (ORWoodWeek)ata20%discountoffthenormaladvertisingrates.Howeverbecauseofexpecteddemandtheplacementandpositioningoftheadvertisementswillbeona“firstcomefirstserved”basis.
• Deadline for Event Brochure Printing: Forinclusionofsponsors’companylogosintotheeventflyers,confirmationofsponsorshiphasto be received BEFORE Friday 29 May 2014.Sponsoringcompaniescan indicate their interest after this date, but because of production schedules,maybeunabletobeincludedintotheprogrammeflyersthatarebeingusedtopromotetheevent.
Note: Companystaffnotparticipatinginthefullconference,butattendingtheeventtomanthedisplays,willbechargedaspecialdiscountedrateof$100+GSTperday.Namesofanystafftakingupthisoption,alongwiththedaysthatstaffwillbeattending,willneedtobesentthroughtoourRotoruaoffice.Thisdiscountedratedoesnot include access to conference presentations or attendance at conferencedinner.
•Promotionalbenefits forsponsorshipwillcommenceoncepaymentisreceived.
Youmayalsolikeustoconsideryourparticipationintheeventasapresenter,oralternativelyyoumayliketorecommendanoverseasorlocalexpertforinclusionintheconferenceprogramme.
IfyouwouldliketodiscussthesesponsorshipopportunitiespleasecontactGordonThomsononTel:(+64)79211384,Mob:(+64)272758022 or email:[email protected]
Forspeakingopportunities,pleasecontactBrentApthorponTel:(+64)[email protected]
A good mix of presenters and participants, excellent expert input, and once again great networking opportunities. (SawTECH 2011)
MILL SCANNING - SAWING - OPTIMISATION 5
Register your Interest:
Additional Marketing Opportunities:
TheForestIndustryEngineeringAssociation(FIEA)providesarangeofuniquemarketingopportunitiesforcompanieswanting to increase their exposure to the forest & wood productsindustriesinNewZealand&Australia.
• E-newsletter Advertising
FridayOffcutsisthemostwidelyreadweeklye-newsletterbyforestryandwoodproductscompaniesinAustralasia.WoodWeekisacomplementaryweeklye-newsletterdesignedforforestrymanagersandcontractors.Weeklyandlongertermoptionsareavailableforbanner,display,jobsandequipmentadvertising.
• FIEA Partners
FIEAPartnersassistinbringingawiderangeoftechnologyevents and conferences to Australasian forestry, wood processingandmanufacturingcompanieseachyear.Comparedtoindividualeventsponsorship,thetargetedpromotionalbenefitsandopportunitiesforproductandservicepromotionofferedthroughannualsponsorshiparesubstantial.IfyouwouldliketoconsiderextendyourWoodTECH2015eventsponsorshipandbecomeanFIEAPartner,pleasecontactourFIEASponsorshipManager.
Register Your InterestIf you are interested in sponsorship or exhibiting at this event, or any of the above marketing options please contact:
Gordon ThomsonFIEA Sponsorship & Events ManagerTel: (+64) 7 921 1384, Mob: (+64) 27 275 8022or Email: [email protected]
If you have any further questions, or would like to discuss a tailored package, please contact us today.
Great networking – very enjoyable. Good to have the opportunity to chat with others about their sites & pick up ideas. (SawTECH 2011)
MILL SCANNING - SAWING - OPTIMISATION6
Ordernumber
ChequepayabletoForestIndustryEngineeringAssociationenclosed,or
DirectcreditourWestpacNZAccount:03-1552-0257749-00,or
DirectcreditourWestpacAustraliaAccount:BSB033115-Account#137710,InnovatekLtd,or
PleasedebitmyMasterCard/Visa(circleone)
Amountenclosed:$
Creditcardnumber: CSCNumber:
Expirydate: Cardholder’sname:
Cardholder’ssignature:
Payment:
Company:
Name: Position:
PostalAddress:
Tel: Email:
Signature: Date:
Details:
Please check you have filled in all details, signed and return to: Fax: (+64) 7 921 1381Email: [email protected]: PO Box 1230, Rotorua 3040,New Zealand Tel: (+64) 7 921 1384Mob: (+64) 27 275 8022
Confirmation of Event Sponsorship I would like to confirm that our company will sponsor as detailed below:
Five Star Sponsor $5,000 + GST* NZ$3,000 + GST AU$3,000 + GST
Four Star Sponsor $4,000 + GST* NZ$2,500 + GST AU$2,500 + GST
Three Star Sponsor $3,000 + GST* NZ$2,000 + GST AU$2,000 + GST
Sponsorship Package Both Events (New Zealand & Australia) New Zealand Only Australia Only
Please note:•Foraccountingandtaxpurposes,eachvenuewillbeinvoicedintheappropriatecurrency.Forsponsorshipforbothvenues, 50%ofthetotalamountwillbeinvoicedinNZcurrencyand50%inAustraliancurrency.•NewZealandGSTis15%andAustralianGSTis10%.•Promotionalbenefitsforsponsorshipwillcommenceoncepaymentisreceived.•Pleasenotethatanydamagecausedbythesponsortotheevent,venue,orequipmentsupplied,willbetheresponsibilityof thesponsor.Anylossordamagetosponsorsequipmentduringtheeventwillalsobetheresponsibilityofthesponsor.
Good stuff, very good presenters. Great to see mill guys presenting. (SawTECH 2011)
MILL SCANNING - SAWING - OPTIMISATION
Tear
off
alon
g pe
rfor
ated
line
7
www.woodtech.eventswww.woodtech.events