Horizontal Diaphragms by Bart Quimby, P.E., Ph.D UAA Civil Engineering CE 434 - Timber Design.
Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska...
-
Upload
enrique-corbit -
Category
Documents
-
view
219 -
download
4
Transcript of Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska...
![Page 1: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/1.jpg)
Wood Structural Panels
CE A433 – Spring 2008T. Bart Quimby, P.E., Ph.D.
University of Alaska AnchorageCivil Engineering
![Page 2: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/2.jpg)
Wood Structural Panel Uses
• Structural panels are used for a wide variety of uses including– Sheathing of roofs, floors, and walls to
• Transfer pressure loads normal to the surface to supporting framing
• Carry shear loads in structural diaphragms
– Structural Components such as• Lumber-plywood beams• Various types of panel components
– Gusset Plates– Concrete Formwork
![Page 3: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/3.jpg)
Sheathing Applications
• See figure 8.1 from text• The required panel thickness is a
function of the loads applied normal to the surface
• Attachment of sheathing is a function of the loads in the plane of the panel (i.e. diaphragm shears)
![Page 4: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/4.jpg)
Types of Wood Panels
• The principle types of wood panels used in timber construction include:– Plywood– Oriented Strand Board (OSB)– Waferboard– Composite panels– Structural particle board
![Page 5: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/5.jpg)
Plywood• Made by gluing veneers together
– Plys have different names• Face• Back• Crossband• Center
– Grain direction is alternated by layer• This creates different strengths in each
principle direction
– Veneers come in different qualities • Dependant on number and types of
imperfections
![Page 6: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/6.jpg)
Section Properties by Principle Direction
• See text figure 8.6
Face Grain
![Page 7: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/7.jpg)
More Plywood
Plywood comes in many different thickness and plys.
![Page 8: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/8.jpg)
Species Groups
• Species are grouped together by similar strengths.
• See text for the five plywood species groups.
![Page 9: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/9.jpg)
Veneer Grades
• Veneers come in different levels of quality, based on imperfections.
• See text for different grade specifications.
![Page 10: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/10.jpg)
Exposure Durability Classifications
• U.S. Product Standard PS-1 – Construction and Industrial Plywood Specification– Interior– Exterior
• APA Performance-rated panels– Exterior– Exposure 1: Interior plywood with
exterior glue– Exposure 2: Interior panels
![Page 11: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/11.jpg)
Plywood Grades• There are a large number of grades• Most SHEATHING applications use
– C-C Exterior– C-D Exterior 1– C-C STR I– C-D STR 1
• The “STR I” grades have added strength properties and are more expensive.
• Span ratings give the maximum recommended span lengths for roof and subfloor applications– Assumes strong direction over two or more spans– Must satisfy edge support requirements– Different thickness can result in same span rating
![Page 12: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/12.jpg)
Plywood Grade Stamps
• See examples in the text (pgs 8.15, 8.18, 8.19, 8.29)
• Also see…
![Page 13: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/13.jpg)
From APA Website
![Page 14: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/14.jpg)
Oriented Strand Board• Made of wood
strands or wafers directionally oriented, compressed and bonded by a resin.
• Two different surfaces
• Grade designated by Performance-based ratings and PS 2
![Page 15: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/15.jpg)
Combined Sheathing-Siding
• T1-11 is commonly used.• See text figures
![Page 16: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/16.jpg)
Two Layer Floor Sheathing• Two Layer System
– See text Figure 8.28– Subfloor
• The structural support for the floor
– Underlayment• Provides a smooth surface for floor• Non Structural
– Need to make sure the panel edges don’t align with adjacent layer.
– Second number is span rating when used as subfloor
![Page 17: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/17.jpg)
Drawing from APA
![Page 18: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/18.jpg)
One Layer Floor Sheathing
• Must have some means of connecting edges of panels so that they move together– Tongue & Groove– Blocking– Offset underlayment– Lightweight concrete– Thick wood finished flooring
![Page 19: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/19.jpg)
Selection of Floor Sheathing
• “typical wood structural panel applications for floor sheathing are not controlled by uniform load criteria, but instead are based on deflection under concentrated loads and how the floor feels to building occupants.” (text pg 8.27)
• Can use span ratings to select the flooring• See “Guide to Panel Use” (ASD/LRFD Manual for
Engineered Wood Construction, Table M9.1-1), and Table M9.2-1 for usage and typical span ratings.
![Page 20: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/20.jpg)
Wall Sheathing
• All edges must be blocked• See text Figure 8.16• Architectural panels can be used that
are combined sheathing and siding• Details for preventing water
infiltration are shown in text figure 8.19c
![Page 21: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/21.jpg)
Structural Calculations
• Not normally done for sheathing applications– Use span ratings.
• The ASD/LRFD Design Manual for Engineered Wood Construction
• APA Documents: http://www.apawood.org/– Load-Span Tables for APA Structural Use
Panels– Panel Design Specification
![Page 22: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/22.jpg)
APA Load-Span Tables
![Page 23: Wood Structural Panels CE A433 – Spring 2008 T. Bart Quimby, P.E., Ph.D. University of Alaska Anchorage Civil Engineering.](https://reader035.fdocuments.in/reader035/viewer/2022062417/551a44e3550346545e8b5167/html5/thumbnails/23.jpg)
Sample Allowable Uniform Load Calculations
Should also make shear spreadsheet