Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

17
BuildTrack- Winner of CII National Award 2015 for Most Innovative Energy Saving Product

Transcript of Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Page 1: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

BuildTrack- Winner of CII National Award 2015 for Most Innovative Energy Saving Product

Page 2: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Copyright © 2015 BuildTrack

Guaranteed Energy Savings for your existing and new projects

with wireless sensors

Page 3: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Every Switch is a Green Opportunity

Switches need to be AUTOMATICALLY controlled in order to reduce Energy Bills

Switchescontrol

almost every electrical

device

Page 4: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Control the Switch for Savings

People forget to turn switches OFF resulting in energy wastage

This results in higherenergy bills

Page 5: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

The Everyday Energy Challenge

HOMES INSTITUTIONS BANKS OFFICES HEALTH CARE FACTORIES

How can you stop energy wastage and save money on energy bills ?

Page 6: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Sensors are the answer

Why then are they NOTcommonly used ?

Page 7: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Practical Challenge 1:

Wiring Sensors need to

be wired to each device

Wiring ruins the aesthetics of finished spaces and add costs

Very Impractical

Page 8: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Practical Challenge 2:

Sensor Failure If sensors fail, then

wired installation does not allow the switch to operate!

Sensor needs to be removed from loop for switch to work!

Very Impractical

Page 9: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Practical Challenge 3: Multiple Devices Multiple devices are

usually in a room!

One sensor needs to control them all!

Not possible without a wiring MESS !

Long room requires multiple sensors

Multiple lights and fans and Air Conditioning requires multiple sensors

Very Impractical

Page 10: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

The Solution

BuildTrackWIRELESS SENSORS

Page 11: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

The Solution for all situationsWireless sensors addresses all these practical challenges• No Wiring• Switch works even

on sensor failure• Multiple devices can

be controlled !

Page 12: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

How do they work?

Page 13: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Wireless Sensor: Benefits

No Wiring NEEDED

Sensor can be freely placed where required

Rapid deployment, often in under an hour

Aesthetics of the room is maintained intact

Single sensor can control multiple switches located in a single switch panel or even in multiple switch panels

Switches will work, even if sensors fail or run out of battery !

Users can still turn off individual devices with switches

Variable delay timings for different devices

GOOD PAYBACK

CONVENIENCE to users

Page 14: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Components

Page 15: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Payback in < 1 year !

Page 16: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Useful Deployment Situations

High Value & Quick Payback is obtained in situations where intermittent occupancy happens and/or adequate daylight is available. such as Private offices & cabins Conference Room Classrooms Kitchens/Pantries Restrooms Safe Deposit Box rooms (banks)

Corridors Warehouse aisles Stairwells Elevators ATMs

Page 17: Won CII National Award 2015. BuildTrack Presentation on Wireless Sensors

Contact Us

SURMOUNT ENERGY SOLUTIONS PVT. LTD.B-003-004, Platform Level, 1st Floor, Tower #10, ITC, Belapur Station Complex,

CBD Belapur, Navi-Mumbai 400614, IndiaPhone. +91-22-61340340/341 | Fax. +91-22-67939390Toll | Free: 1800-2121-277

e-mail: [email protected] | web: www.buildtrack.in

BuildTrack is a registered Trademark of Surmount Energy Solutions Pvt. Ltd.

Start saving Energy today.

Install one today to experience guaranteed savings and convenience !