With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at...

47

Transcript of With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at...

Page 1: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 2: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 3: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 4: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 5: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 6: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 7: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 8: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 9: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 10: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 11: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 12: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 13: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 14: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 15: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 16: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 17: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 18: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 19: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 20: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 21: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 22: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 23: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 24: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 25: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 26: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 27: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 28: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 29: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 30: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 31: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 32: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 33: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 34: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 35: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 36: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 37: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 38: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 39: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 40: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 41: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 42: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 43: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 44: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 45: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 46: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.
Page 47: With pneumatic impact tools (DTH), ... technologies in machining, ... the rig when drilling and at auxiliary operations.

drilling rig FS 500 fraste - gunggarienergy.com.au · air drilling with DTH Hammer, dry drilling with augers. Water wells and researches, Surface soil and mineral explorations, Geothermal

drilling rig FS 500 fraste - gunggarienergy.com.au · air drilling with DTH Hammer, dry drilling with augers. Water wells and researches, Surface soil and mineral explorations, Geothermal

Rig testing - MTU Aero Engines · Compressor rig – Test facilities and auxiliary equipment MTU’s facilities for rig testing offer a wide range of test capabilities. The facilities

Rig testing - MTU Aero Engines · Compressor rig – Test facilities and auxiliary equipment MTU’s facilities for rig testing offer a wide range of test capabilities. The facilities

TABLE OF CONTENTS DRILLING RIG MAIN DATA 3faxedrilling.com/Faxe2.pdf · table of contents drilling rig main data ... 3.1 crown block ... crown block-top view 3.2 auxiliary jib crane

TABLE OF CONTENTS DRILLING RIG MAIN DATA 3faxedrilling.com/Faxe2.pdf · table of contents drilling rig main data ... 3.1 crown block ... crown block-top view 3.2 auxiliary jib crane

DTH- Rajan

DTH- Rajan

SWD DOWN-THE-HOLE DRILLING RIGDTH Drilling Rig SWD DTH Drilling Rig Personalized service with optimum solution, perfect designing & manufacturing system, Free technical training and

SWD DOWN-THE-HOLE DRILLING RIGDTH Drilling Rig SWD DTH Drilling Rig Personalized service with optimum solution, perfect designing & manufacturing system, Free technical training and

DTH SERVICE

DTH SERVICE

Content Managers word - SARL Sapcor Brochure.pdfServices RIG MOVE When a client needs to move a drilling rig, its auxiliary equipment and camp units from one drilling site to another,

Content Managers word - SARL Sapcor Brochure.pdfServices RIG MOVE When a client needs to move a drilling rig, its auxiliary equipment and camp units from one drilling site to another,

Blast hole DTH drilling rig

Blast hole DTH drilling rig

DTH Catalogue

DTH Catalogue

Dth Industry

Dth Industry

5178015 daewoo-cm-101 s-dth-21s7-dth-21s8

5178015 daewoo-cm-101 s-dth-21s7-dth-21s8

DTH System

DTH System

Airtel DTH

Airtel DTH

Introduction & DTH

Introduction & DTH

DAEWOO CM-101S DTH-21S7,DTH-21S8

DAEWOO CM-101S DTH-21S7,DTH-21S8

DTH ADVERTISING

DTH ADVERTISING

DTH SERVICES

DTH SERVICES

FAE FAR DTH 195 MR SPECS - imtglobalsolutions.com · Drilling Rig DTH / Piloteadora DTH FAR 195 MR DTH SPECS LARGE DIA. DTH RIG / PERFORADORA DE GRAN DIAMETRO DHT Torque Max. / Torque

FAE FAR DTH 195 MR SPECS - imtglobalsolutions.com · Drilling Rig DTH / Piloteadora DTH FAR 195 MR DTH SPECS LARGE DIA. DTH RIG / PERFORADORA DE GRAN DIAMETRO DHT Torque Max. / Torque

LF 350 RIG AND FREEDOM LOADER - Boart Longyearapp.boartlongyear.com/brochures/LF350e_DataSheet_V5.pdfE DRILL RIG & FREEDOM ... angle is ideal for auxiliary equipment such as the FREEDOMTM

LF 350 RIG AND FREEDOM LOADER - Boart Longyearapp.boartlongyear.com/brochures/LF350e_DataSheet_V5.pdfE DRILL RIG & FREEDOM ... angle is ideal for auxiliary equipment such as the FREEDOMTM

Bulroc DTH

Bulroc DTH